Gameloft games problem after downgrade to 3.1 - Xoom General

kuno56 said:
Hi, I have a MZ601 3g Xoom (italian).
Tiamat 2.2.2 Moray was more unstable than the 3.1, for me.
I decided for a downgrade to my old stock 3.1 backup maked with ClockworkMod 4.0.0.4, but I was faced with serious problems with all gameloft games so.
All this games, even if downloaded from the beginning, after some time from running they reloaded the "load screen" or freezing and re-running more and more times during game play, as if they were still loading at startup.
I'm sick, what do you advise me to do?
Do I return to the stock with the fastboot procedure?
Is there no better way to repair the damage?
Click to expand...
Click to collapse
Hi at all.
I have the same problem of this member after the downgrade. Could someone help me?
I tried everything I could think of. Before adopting extreme solutions I would like to hear yours.

Related

[FW] New Firmware - 2.3.20

Hi all,
We have a new firmware, 2.3.20
I think it's enough to write
Regards.
Damn, and I just switched over to UrukDroid. What am I supposed to do now?
Hpi said:
Damn, and I just switched over to UrukDroid. What am I supposed to do now?
Click to expand...
Click to collapse
switch back to stock or wait until urukdroid devs merged the changes into urukdroid
Some tests with the new firmware should be done.
Can it be downgraded back to 2.1.08?
Is archangel working?
Anybody volunteer to being the Guinea pig?
Because they have changed the format of the Medialibrary, they prevent the downgrade.
Wifi channels above 10 are not working atm.
Otherwiese it feels better.
It looks smoother than before. And I had somr problems with some piano apps before there was no voice with some of them. But now all of them working. I don't know it's related with fw though
On my archos 101 the browser is now much smooter and multi touch zooming is better and everithing is lot faster even some games aren't so laggy.
wdl1908 said:
Some tests with the new firmware should be done.
Is archangel working?
Anybody volunteer to being the Guinea pig?
Click to expand...
Click to collapse
Apparently Archangel does not work anymore.
Holy **** archangle wont work any more (thats true). What now? Will there be uptate for archangle.
DR.Georg said:
What now?
Click to expand...
Click to collapse
a) if Archos really closed the leak which archangel was using to gain root privileges, they have to find another leak and you have to wait until they found it
b) you have to use the SDE root method (which will be available as soon as I get my A101IT back from Archos)
c) life without root privileges
I installed 2.3.02, but the downgrade doesn't work (the update is too old...).
Is there an other possibility to downgrade?
No, no downgrade possible.
Does upgrading to newer fw clears/deletes my current files? Im still using 2.0.71 fw.
siraf said:
Does upgrading to newer fw clears/deletes my current files? Im still using 2.0.71 fw.
Click to expand...
Click to collapse
Nope it won't delete your files
Is this actually still 2.2, despite the release #?
Also, anyone else out there use Move2SD enabler (root) and then do this upgrade? I am a little nervous what will happen with those apps that were previously moved to SD in this non-standard way.
Thanks,
glowco said:
Is this actually still 2.2, despite the release #?
Also, anyone else out there use Move2SD enabler (root) and then do this upgrade? I am a little nervous what will happen with those apps that were previously moved to SD in this non-standard way.
Thanks,
Click to expand...
Click to collapse
Archos release numbers have nothing to do with what version of Android that is being run.
There is no root in this firmware yet so Move2SD will not work. The regular apps2sd that is built in to Froyo will work though.
Thanks for the quick response.
I still am unclear what will happen with the apps that I already moved prior to the upgrade.
glowco said:
Thanks for the quick response.
I still am unclear what will happen with the apps that I already moved prior to the upgrade.
Click to expand...
Click to collapse
They won't work. At least that is my guess as I have never used that program before.
Is it worth it though?? Your thoughts....
Ok, I have my A101IT rooted via Chulri's way and it's running smooth n' sweet but I have a question about this apparent new updated Firmware Version 2.3.02? Am I correct to have understood that ..."there was a leak but the leak is currently non-existent and you can't get the new 2.3.02 Firmware any more"? If not, where can you get it... (I.E. - Posting a link to it)?
Also, with those of you who have tested this new Firmware 2.3.02 and/or are currently using it on their Archos 70/101IT tablet (granted it's possible to install right now)... is it worth updating to AND other than "not being able to downgrade because of the Media Library issue are there any other reported issues or areas of concern? How about any advantages over Froyo 2.1.08 WITH full Root Access (which is what I currently have)? Would there be any improvements in things such as Overclocking speed and lag issues with this new 2.3.02??
OK that's my first post here,
I had urukdroid 0.7 installed. I restarted in android mode and downloaded the AOS FILE, then restarted an proceeded with the upgrae. I dont have the root rights anymore but can choose to start in android mode (2.3.02) or in developer mode (urukdroid) 2.1.8 , I can remote control the Archos 101 from my Samsung Galaxy S iin android mode not in Urukdroid. The bootloader is 4.04.000000. I hope it helps.
The other problem is that I had to dislable the screen autosleep as it doesn't wake up anymore in android mode (That's not the case in developer Urukdroid mode).
PS: I still have the root rights in Urukdroid (developer mode), I had to clean the Titanium backup cache as it didn't showed anymore the applications.

[Q] I'm on the leaked GB 4.5.573 - any sense in upgrading?

Everything is working flawlessly for me, I have had zero issues with this ROM since day one. Maybe I just don't use the phone enough or really stress it, but I have yet to come across any quirks on this leaked 4.5.573. Everything works - gps, netflix, any apps I download, corporate sync, etc. etc.
Is there any sense in upgrading to the latest official OTA GB? I figure if it ain't broke don't fix it...right? Or are there compelling reasons to go ahead with the official OTA? And if the answer is YES UPGRADE, what's the best way to do this considering I'm on 4.5.573 right now? BTW, I'm on Cricket.
I've got this same question. I want to upgrade for several reasons, but what I've read on several sites is that we have to do the SBF thing back to 2.2, then upgrade.
Almost none of the threads I've read at several sites even mention .573 anymore, so I'm not exactly sure of the route to go.
Why do you want to upgrade? Are you running into problems? Unless there's a good reason to upgrade I'd prefer not to, especially if I have to SBF in order to upgrade. That means I'll have to re-do my Cricket flash which I've probably done 50 times now but I'd prefer not to have to do it again.
hey guys,
i am on version 596 of gb, the official version. and i would highly recommend upgrading, there is a new kernel and new baseband. that means the phone runs more smooth and you have cleaner calling and stuff. i have noticed a big improvement in the new kernel and stuff. it would be very beneficial to upgrade in my opinion.
^^^
Those were the reasons I wanted to upgrade. Performance took a GOOD bump in the updates after .573
I just followed the instructions here...
http://www.mydroidworld.com/forums/...new-full-sbf-droid-x-2-3-340-a.html#post56464
Method 2 worked for me, the first one wouldn't detect my phone. I got a boot loop after it finished so I booted into recovery and cleared the cache/data factory reset.
Now it's all fine.
Now to find the right set of GB update roms.
you'll want the updated radio found in the later versions and .596 runs buttery smooth. about a week of heavy use not one reboot or crash.
I gotta say, I'm VERY glad I did it. It was smooth and quick before, but good lord, this is CLEAN.
Not one reboot, not one crash, all NOICE!
i'm on 4.5.573 with root and the phone has been running crazy slow for the last week. will this work? i'm trying method 2 but it will not recognize my phone.
thanks!
RED ZMAN said:
^^^
Those were the reasons I wanted to upgrade. Performance took a GOOD bump in the updates after .573
I just followed the instructions here...
Method 2 worked for me, the first one wouldn't detect my phone. I got a boot loop after it finished so I booted into recovery and cleared the cache/data factory reset.
Now it's all fine.
Now to find the right set of GB update roms.
Click to expand...
Click to collapse
I would reccomend updating to a newer version from team black hat. Its faster, smoother, the blur is different (better) and best of all, pre rooted.
Sent from my Xoom using XDA Premium App

Stock or custom?

I am getting tired of waiting for the stock 3.1 rom now so I am starting to think about using one of the custom roms.
Have there been any performance and function comparisons between the stock rom and the custom roms?
Or do you have any good arguments either way?
The two most popular appear to be Virtuous Picasso and Virtuous Galaxy. I have been using the 1.08 version of the former for sometime and have had no issues. I thether, have gps, bluetooth, WiFi all w/out issue. If your rooted, get wild and flash them both; see which you Luke better.
I like virtuous galaxy for the the touchwiz, but there were too many broken things. Exchange didn't work, couldn't access files on my external sd card (although apps like google music seemed to be able to) and my usb keyboard didn't work. Virtuous galaxy seems to work without any issues.
I've tried them all so far, and they all have pro's and con's. They also all have bugs, which is only to be expected.
Currently, I'm running stock and, to be honest, kinda prefer it. Though I *have* rooted and added a few tweaks...
willyampz said:
I like virtuous galaxy for the the touchwiz, but there were too many broken things. Exchange didn't work, couldn't access files on my external sd card (although apps like google music seemed to be able to) and my usb keyboard didn't work. Virtuous galaxy seems to work without any issues.
Click to expand...
Click to collapse
You started off saying virtuous galaxy had too many broken things, then went on to say virtuous galaxy seems to work without issues? Maybe it's too early and I'm reading it wrong in my barely awake state, but could you clarify please? Lol
vanisleguy1976 said:
You started off saying virtuous galaxy had too many broken things, then went on to say virtuous galaxy seems to work without issues? Maybe it's too early and I'm reading it wrong in my barely awake state, but could you clarify please? Lol
Click to expand...
Click to collapse
I don't mean to speak for willy but I think what he was saying is that at first, Virtuous Galaxy was nice but had too many broken features but after the release this past weekend, most of the bugs are fixed.
I am using Primee which is the Asus Transformer ROM with some of the Acer items left intact. I have tried Virtuous Galaxy and UI is beautiful but I was getting a barely perceptible lag opening and closing the app drawer even after OC to 1500 and it was bugging me. I think the problem could have been one of the Samsung widgets.
I normally recommend loading a custom rom if you feel comfortable. I rooted my HTC Magic back in the early days of Android and have never looked back.
wahlis said:
I am getting tired of waiting for the stock 3.1 rom now so I am starting to think about using one of the custom roms.
Have there been any performance and function comparisons between the stock rom and the custom roms?
Or do you have any good arguments either way?
Click to expand...
Click to collapse
You should go for 3.1 stock (official acer update), works like butter and fixes problems that custom roms still have (like cell stanby) unless they are based on 3.1 stock (I'm still waiting )
Update to 3.1 stock Acer Official Update
No wipe needed or acer recovery/cwm, you don't lose your data, but it's highly recommended to backup and use recovery/cwm, through again not necesary.
Here is a change log (what's new/changed) to see if it's worth, if you do update please share with me in that thread what's new and changed so we can inform, share and encourage pleople to update to 3.1, plus if you do it now you get new OTA Acer_ A500_4.010.30_COM_GEN1 (I sound like a salesman ) who knows for how long they will keep the update
Justray said:
You should go for 3.1 stock (official acer update), works like butter and fixes problems that custom roms still have (like cell stanby) unless they are based on 3.1 stock (I'm still waiting )
Update to 3.1 stock Acer Official Update
No wipe needed or acer recovery/cwm, you don't lose your data, but it's highly recommended to backup and use recovery/cwm, through again not necesary.
Here is a change log (what's new/changed) to see if it's worth, if you do update please share with me in that thread what's new and changed so we can inform, share and encourage pleople to update to 3.1, plus if you do it now you get new OTA Acer_ A500_4.010.30_COM_GEN1 (I sound like a salesman ) who knows for how long they will keep the update
Click to expand...
Click to collapse
My question is,after read almost all pages of the threads about this;does this go for all devices?I have a emea_gen3..sorry if i'm being a Noob now.
Sent from my A500 using Tapatalk
Thanks for all the advice. I think I'll wait a while longer for the stock now. It doesn't sound like the custom roms are the kind of miracle upgrades I got to my Hero and Desire phones yet.
Sent from my A500 using Tapatalk
booze78 said:
My question is,after read almost all pages of the threads about this;does this go for all devices?I have a emea_gen3..sorry if i'm being a Noob now.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA.
wahlis said:
Thanks for all the advice. I think I'll wait a while longer for the stock now. It doesn't sound like the custom roms are the kind of miracle upgrades I got to my Hero and Desire phones yet.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Actually the update posted IS official, Acer one, right now those with that version are getting OTA .30 update, so as far as I know that's stock unless you mean out-of-the-box as stock.
i meant to say virtuous picasso seems to work without issues and tried to edit it after.
Justray said:
Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA.
Actually the update posted IS official, Acer one, right now those with that version are getting OTA .30 update, so as far as I know that's stock unless you mean out-of-the-box as stock.
Click to expand...
Click to collapse
Yessss,it worked.Lost root only..
Sent from my A500 using Tapatalk
booze78 said:
Yessss,it worked.Lost root only..
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
and you can re-root
Please post here anything new you find, new issues, fixed issues, software and experience related please
Just don't forget to back up!
@Justray, you say : "Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA."
How do you procede to go from EMEA_GEN3 to COM_GEN1?
My machine is COM_GEN1 so I'm happy. My sister who got hers in Denmark is EMEA_GEN3 and is still stuck with firmware 1.x (Android 3.0.1)... Is there a step-by-step instructions for going to COM_GEN1 for her machine?
I suspect I can then download the latest firmware manually from : code.google.com/p/acer-a500/downloads/list or use OTA like my machine?
Thanks,
Gilles.
ggravier said:
@Justray, you say : "Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA."
How do you procede to go from EMEA_GEN3 to COM_GEN1?
My machine is COM_GEN1 so I'm happy. My sister who got hers in Denmark is EMEA_GEN3 and is still stuck with firmware 1.x (Android 3.0.1)... Is there a step-by-step instructions for going to COM_GEN1 for her machine?
Click to expand...
Click to collapse
I too went from EMEA_GEN3 to COM_GEN1. Here is the basic low-down as to how I went about it:
* Install Acer Recovery from Market and use it to install clockworkmod.
* Download the COM_GEN1 ROM from http://forum.xda-developers.com/showthread.php?t=1176632 thread.
* Use Acer ROM Decrypter to decrypt the .zip file and extract the update.zip from there.
* Rename the update.zip to something like e.g. AcerROMcomgen1.zip and copy it on your SD card. It's important that it is on the SD, not internal storage.
* Turn off your tablet, then turn it on while keeping the volume button pressed down until you see white text appear on the tablet screen's top-left corner.
* Use clockwordmod to first make a full backup for just-in-case. I really mean it: do a full backup. You never know if you might need it later!
* Then format cache, format data/factory reset, then install zip from SD.
* Reboot.
As for navigating in clockwordmod: you use the volume button to go up or down in menus, and power button to select the menu item.

[HELP] Freezes and Reboots w/Custom Kernels

Hi there,
Ok, here is my last try to get a fix before I quit. I have a problem only related with Custom ROMs so I expose it in the Dev zone. Sorry if it is not correct.
For those who haven't follow the Perfect Recovery topic, I have one of the so called X5 Black Sheep. Initially these X5's appeared in Portugal and the synthom was stuck forever on IDEOS screen when enter in CWMv4.0.0.5 from genokolar. Finally stockwell have modified the CWMv4 with the kernel from MIUI and we can now enter in and flash the new Custom ROMs.
The thing is, my X5 keeps freezing and restarting in ALL custom ROMS. I have tried Oxygen, CM7, void and MIUI. ALL with same result. Even the ClockWorkModv4 from stockwell freezes and restarts sometimes when making or restoring backups.
I think it is something related with I/O SDcard as the reboots/freezes happens 90% when making something with it (mounting SDcard in PC through USB, or in Antutu when testing SDcard) but I have tried without SDcard and also with 3 different SDcards. All with same result.
I have absolutely no problem with Official and stock B137 ROM. Only with custom kernels (except SuperBoot from Paul fo Modaco that works 100% stable). Another example is I am absolutely stable with B137 stock but, if I put the boot.img from franciscofranco kernel for void, I can boot but again I have freezes and restarts.
What do you think the problem is? Do I have a faulty X5? Although is strange that with official kernel or SuperBoot everything works stable.
Any help, please?
I have exactly same problem!
I bought a x5 2 days ago. Catched up to the rom scene and tried to root the phone.
The phone was also stuck on ideos logo when trying to boot recovery 4.
Tried the recovery for the black sheeps and worked! Installed the rom and was amazed by the speed and usability.
Downloaded a lot of apps's and it started crashing. So I tried to remove app by app and the problem remains!
The first time it crashed I had problem turning the phone again (even after taking the battery out!).
Now sometimes crashes on standby and turns off.
Most frequently crashes during phone calls.
In one afternoon more then 8 crashes!
Tried to remove the SD card and now i'm waiting to see if the problem is solved.
So the problem is real. I must have a black sheep. And the cure for the black sheep is partially working since it must have some bugs in it..
maxusz, are you portuguese? Because I only have knowledge of Black sheeps in Portugal. At least here in xda never saw anyone complaining from any other country except Portugal, which is odd.
Regarding your problem, it is a bit different than mine. When I flash a custom ROM or put a different boot.img (except SuperBoot), I get freezes and restarts right off the boot. Sometimes I have time to complete a Antutu, but that is rare. Most of the time it hangs within 2 or 3 minutes after booting.
And, as I said, even in stockwell's CWMv4 I have freezes and restarts because it uses MIUI's kernel.
It seems that I have a different hardware from other X5's but... on the other side, I have no issue at all running B136 and B137 ROMs. I really can't understand what is the problem and I am very sad as I bought this model because it was getting a very good development community and now... I'm stuck with stock firmware.
Go to TMN and demand to change the device for a new one.. tell them that it doesn't boot.. if you are in those famous 15days after buy.. if it goes to warrantly you may not have lucky.
Or demand you money and wait for the new remittance of ideos x5, once TMN x5 is out of stock, at least at Lisbon. good luck m8
Been there, done that and I got another black sheep... I am still in that 15 days period although I don' t want to spend my life doing this until I got a normal one.
I would rather prefer to understand and fix whatever is wrong with these X5.
Sent from my u8800 using XDA App
Go there get your money back and wait for brand new X5s in a couple of weeks. Much better than waiting for ever for a working fix which might never happen, since not everyone has the same issue.
best of lucks Royal ;(
If I have to guess - and watching the differences in consistency of the product - I would say there's some difference in HW and thus missing a driver for something. unfortunately, this is just a guess that need proper investigation if this is plausible.
I might do that. I just hope that TMN have stock again very soon.
I am no dev nor programmer but I really like to know the technical difference between these models and the normal ones.
lourenzo said:
If I have to guess - and watching the differences in consistency of the product - I would say there's some difference in HW and thus missing a driver for something. unfortunately, this is just a guess that need proper investigation if this plausible.
Click to expand...
Click to collapse
Anything I can do to check that?
Probably the easiest way to do this is find out why/when it is rebooting... noein already tried to help you, right? try to catch is attention: is examinations must be all done by now
I'm no expert - just guessing...
RoyaL said:
Anything I can do to check that?
Click to expand...
Click to collapse
After a restart, use an app like Root Explorer or ES File Explorer (or adb) to grab the /proc/last_kmsg file and post it here. That should help the devs to find out what is different with your phone.
I am from Portugal!
Bought mine from TMN Aveiro!
Mine also got stuck when installing recovery. I had to try differente boot.img and then the one it worked was the one for the black sheeps
atiatinini said:
After a restart, use an app like Root Explorer or ES File Explorer (or adb) to grab the /proc/last_kmsg file and post it here. That should help the devs to find out what is different with your phone.
Click to expand...
Click to collapse
Before testing I was checking and I can confirm that I do not have any file or folder inside /proc named "last_kmsg".
Any clue?
I was thinking... Could this be caused by I have upgraded to B137SP04 Official ROM and this changes anything in the system that is used by any custom kernels?! Does this makes any sense?
Because the B137SP04 is later than any custom ROMs. For example, void was first created based on FLB (I think) that was based on first B137 ROMs. SP04 came after.
Just a shot in a dark.
nope - I also cheked and couldn't find that file (unless it's hidden).
RoyaL said:
I was thinking... Could this be caused by I have upgraded to B137SP04 Official ROM and this changes anything in the system that is used by any custom kernels?! Does this makes any sense?
Because the B137SP04 is later than any custom ROMs. For example, void was first created based on FLB (I think) that was based on first B137 ROMs. SP04 came after.
Just a shot in a dark.
Click to expand...
Click to collapse
I don't think so... I had the same problem... CWM 4.0. I upgraded from TMN ROM to B137 (Czech Omitel) and afterwords I've instaled MIUI custom ROM (with CWM 3...) and upgraded to CWM 4 after stockwell update.
can't find that file either! did a search of it and it's nowhere to be found!
rimsilva said:
I don't think so... I had the same problem... CWM 4.0. I upgraded from TMN ROM to B137 (Czech Omitel) and afterwords I've instaled MIUI custom ROM (with CWM 3...) and upgraded to CWM 4 after stockwell update.
Click to expand...
Click to collapse
And you have no problem, right?
no problems!
RoyaL said:
Before testing I was checking and I can confirm that I do not have any file or folder inside /proc named "last_kmsg".
Any clue?
Click to expand...
Click to collapse
That's odd... Try to do an adb logcat until your phone restarts and post it here. Or you can do it directly from your phone: install the 'Terminal Emulator' app, open it and enter 'su', and then 'logcat > /data/logcat.txt' commands. Wait until your phone restarts. Then use Root Explorer or ES File Manager to grab that file (/data/logcat.txt) and post it here.
Hmm... This sounds a bit like the issue I am having with custom kernels on my X5, bought in Sweden in April or so.
I tried a couple of overclocked kernels on top of the stock ROM a while back and they all crashed my phone in less than an hour so I gave up on those. I am still on the original ROM (no OTA updates here in Sweden) and have not tried or moved to recovery v4 yet.
Which custom ports and ROMs actually work well on the black sheeps?
Need I say I am little disappointed in Huawei...

TF300TG: NvRmChannelSubmit failed

Hi!
I have the TF300TG, Stock ROM and I've installed the Galaxy on Fire 2 THD from the Tegra app.
First everything looks good but sometimes the screen starts flickering, the game don't respond anymore and in the logcat I got many lines with "NvRmChannelSubmit failed".
The only way to get out of this is killing the game and restarting the device. After that the game will run some time until the problem comes back.
Any hints?
Have you updated? I believe there was an issue in older ota there up too .30 now
MegaNoob said:
Have you updated? I believe there was an issue in older ota there up too .30 now
Click to expand...
Click to collapse
Not for the 300TG. There is still .28 most recent.
It seems that the Prime and the TF700 have (had?) this problem, too:
http://forum.xda-developers.com/showthread.php?t=1766647
http://forum.xda-developers.com/showthread.php?t=1753905
Update: Firmware-Update to the new 9.4.4.40 did not help. And sometimes the Maps App also crashes when I enter a search. :crying:

Categories

Resources