Related
Okay, I had bricked this phone earlier when I screwed up the flashing of a custom rom, but figured I'd fix it when I had time. Now when I need it to work, it won't
I have flashed the phone a total of about 15 times (RSDlite, sbf_flash, ezsbf, everything), and every time it goes to the bootloader screen.
I tried factory resetting it from recovery. Recovery and Bootloader mode both work, but I can't seem to boot up the phone.
Once, the phone booted android and the welcome screen was shown, then it shutdown after 10 seconds.
Is there a key combination I can press to boot regular?
And have I maxed out the rewrites to the flash?
Any help would be appreciated
rhcp1253 said:
Okay, I had bricked this phone earlier when I screwed up the flashing of a custom rom, but figured I'd fix it when I had time. Now when I need it to work, it won't
I have flashed the phone a total of about 15 times (RSDlite, sbf_flash, ezsbf, everything), and every time it goes to the bootloader screen.
I tried factory resetting it from recovery. Recovery and Bootloader mode both work, but I can't seem to boot up the phone.
Once, the phone booted android and the welcome screen was shown, then it shutdown after 10 seconds.
Is there a key combination I can press to boot regular?
And have I maxed out the rewrites to the flash?
Any help would be appreciated
Click to expand...
Click to collapse
What sbf file are you using?
These
Albinoman said:
What sbf file are you using?
Click to expand...
Click to collapse
1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf
VRZ_A955_2.3.20_1FF_01.sbf
and EZSBF 1KDStaz_D2_4.5.601.iso
There's a couple of us with this problem. See my thread just a few down from this. Not sure what is going on. I've tried everything, eventually just settled on buying a DroidX instead of waiting for a fix.
I can get to recovery and bootloader, the problem is it won't boot
Have the same problem, you should be trying to get back to an earlier SBF, if you upgraded to 2.3.4, give up, still has no solution, since the SBF 2.3.4 has not leaked voi
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.
dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??
Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.
Hi,
1. I rooted my phone successfully.
2. I installed droid2recovery.apk
3. Restarted. Installed CM10 and Gaaps (wrong version)
4. Reboot. Everything was normal with some annoyances due to the wrong version of Gaaps.
5. Checked and the phone was already rooted in CM10. Installed droid2recovery.apk again. Reboot.
6. Trapped in bootloop.
7. Reboot and enter in system recover.
8. Tried to install CM10 and correct Gaaps. Not possible due to failed to verify whole-file signature.
9. Discover that official recover mode doesn't install unofficial roms.
10. Searched for official roms of Milestone 2 BR. All links are broken.
11. I flashed downgrade_for_bl_3 with RSD Lite. Everything was ok. PASS.
12. Still bootloop. Enter in recover mode. Black screen. Can't see the android icon with exclamation mark.
Is my phone a paper holder now? Please advise.
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
douglasrac said:
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
Click to expand...
Click to collapse
You have to flash that same Android 2.3.6 SBF file, you can't use any more that "another sbf". For rooting that 2.3.6 use this http://forum.xda-developers.com/showthread.php?t=1750277
http://forum.xda-developers.com/showthread.php?t=1758271 this can help too
After you get CM10 back running, do not use droid2recovery.apk anymore!
Thank you. That really helped.
After you get CM10 back running, do not use droid2recovery.apk anymore!
Click to expand...
Click to collapse
Why not?
Odp: [Q] Black screen and bootloop
douglasrac said:
Thank you. That really helped.
Why not?
Click to expand...
Click to collapse
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
henediac said:
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
Click to expand...
Click to collapse
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
You can still flash other sbfs, but when do turn on, you need to go in recovery mode, than clear cache and data. It will start normally again.
To go to stock recovery hold when turn on "@" or "x", than when show the "android with ! " you hold volume - and foto or volume + and foto or the volume + and -, than you are in recovery.
Sorry about my English
I am showing all the option because I do not remember perfect what to do... But it works
Sent from my A953 using xda app-developers app
cant get it to work..anyone got a link to a froyo stock sbf?
@Yostarone
http://sbf.droid-developers.org/umts_milestone2/list.php
i don't know what froyo rom you want, so I put link to whole list. (build number for eu froyo is MILS2_U6_2.4.24).
paulimbr said:
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
Click to expand...
Click to collapse
I didn't get it working. Did you?
douglasrac said:
I didn't get it working. Did you?
Click to expand...
Click to collapse
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
lulli1 said:
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
Click to expand...
Click to collapse
I wish it was that simple. After flashing the phone is completely dead. And now I cant even go to bootloader anymore.... :crying:
could your problem be battery related? do you have a chance to try using another battery?
lulli1 said:
could your problem be battery related? do you have a chance to try using another battery?
Click to expand...
Click to collapse
Hi,
Sorry for the late reply. I was charging the battery
No, the problem is not the battery. Nothing works anymore. The phone doesn't even turn ON. All Black screen, not even boot loop.
So I get into the bootloader and flash new room. I can see the SN Updated text. But that is it. After it doesn't work.
I flashed DOWNGRADE BL =3 and then I flashed MILA2_U6_3.12.0_SIGNED_US1MILESTONE2PERARB125LA016.0R_GSXMILETPERARLA_P022_A013_M006_HWp2a_WIG142538_Service1FF
Nothing. Black Screen.
Then I flash M2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBPERARB125LA001.0R_STABLE45LAMILETPERLA_P013_A028_M001_HWp2a_Service1FF.
Then I get boot loop.
:S
About a month ago I installed a clockwork based recovery app from the market. I tried restoring and this failed leaving the phone unbootable.
Since then I have tried flashing MANY other sbf`s using rsd lite but this has made the situation worse. I think that I even flashed one for the defy+
Now all I get is either a blank screen or a M logo when I switch on.
Pressing power & volume down doesn`t work so I can`t access the stock recovery menu
I can access the bootloader using power & volume up so i can flash more sbf`s but I`ve tried most of them but none will boot.
BTW the phone was running cm7.1 before I had all this trouble and the battery has been fully charged (in another defy)
Is there any way I can clear off all the stuff I`ve been installing and start from fresh? or can anyone tell me how to get the phone to boot?
I have searched for a solution in the forums but most of the replies involve clearing the cache which I cant do as I cant get to the recovery menu.
Any helpful comments will be gratefully received
many thanks
Jeff H
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
intemptesta said:
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
Click to expand...
Click to collapse
Thanks for the reply
I flashed the DFP-231 sbf file as you suggested but it wouldn`t boot any further than the M logo.
I did get the "please manually power up this phone" message and followed the procedure from the link you gave
I can`t wipe the as I cannot get to the recovery menu.
Is there any other way to wipe the cache?
JeffH
Nah, no other way than stock recovery for stock rom.
Just make sure your flash finished with Finish/pass, that'll make your stock recovery working again.
Wish you a best luck.
i flashed with this:
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
but still no boot
Is this the correct rom?
cheers
JeffH
I wonder if the following might give someone a clue about whats wrong with my defy
If I flash gingerbread rom either defy or defy+ then rsd completes with PASS, and phone will boot as far as the M logo and I can access the menu with power+volume UP
If I flash below gingerbread then rsd doesnt complete but gives `manually reboot` message. If I then power off and plug in again then rsd completes with PASS but when I reboot there is NO M logo and no menu on power and volume up.
I`m keeping my fingers crossed that I will be able to revive my phone.
JeffH
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
intemptesta said:
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
Click to expand...
Click to collapse
No, Power + volume down doesn`t work, (ie nothing happens). Only power + volume up works.
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Vicsa said:
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
Thanks, but it didn`t work. Still stuck at M logo. Obviously I couldn`t clear the cache before and between flashing
JeffH
Thank you all for your helpful advice.
I have now sent the phone away for repair.
I spoke to the technician on the phone and she reckons it needs dismantling and a jtag repair (whatever that is).
But beware an app on the market, I think it is called orange backup, as it was after installing this and trying to restore the backup that I screwed up my phone!
JeffH
Hi,
I have had my motorola Defy Plus running cyanogen for a year or so. Various versions, 2nd init.
Recently I decided to upgrade to Cyanogen version http://forum.xda-developers.com/showthread.php?t=2515036
Got it installed and running ok but there were some glitches (maybe) so I started from scratch to be sure.
The method I used to completely re-initialise the phone is as follows.
repartitioned SD, wiped and flashed
DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
booted into stock android. installed framaroot - rooted.
installed 2nd init
installed twrp
updated recovery
wipe/reset
install cyanogen
The first time I did this it worked (but with some gapps glitches so to trouble shoot I thought I would start again.
Now this is the problem.
the second time when I tried to flash the stock rom RSD lite hung with "please manually reboot the phone"
After this it is impossible to get into stock recovery from the android triangle screen. When pressing both volume buttons the only thing that happens is the screen brightness toggles between light and dim.
I can get the phone to connect to RSD lite and I can flash ROMS - I have tried a few but I cannot get recovery, Always after flashing RSD says please manually reboot phone. The automatic reboot does nothing but get to the motorola or triangle screen, or a black screen sometimes.
Just to clarify - I have googled and tried many solutions, the main problem is that there is no stock recovery from the triangle screen so no solution that relies on this is working,
Any help appreciated. Thanks.
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
pgreed said:
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
Click to expand...
Click to collapse
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
deMangler said:
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
Click to expand...
Click to collapse
I think what would solve my problem would be a way of installing the above rom (which I believe includes the bootloader). I need to solve the problem of the flashing not progressing beyond the reboot stage.
I am using RSD Lite version 6.1.4
Any help appreciated. Thanks.
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
pgreed said:
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
Click to expand...
Click to collapse
There is no functioning recovery, so it is impossible to do a wipe. It is possible to flash a stock ROM (which should restore the recovery) using RSD lite but the process does not get past the reboot stage.
download again the sbf or flash another sbf.
pgreed said:
download again the sbf or flash another sbf.
Click to expand...
Click to collapse
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
deMangler said:
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
Click to expand...
Click to collapse
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
pgreed said:
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
Click to expand...
Click to collapse
Thanks - I will let you know if it works.
deMangler said:
Thanks - I will let you know if it works.
Click to expand...
Click to collapse
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
same here - but your report helped!
I had the same problem and did what you did... boot with vol+down and power and got to the triangle. then press UP+DOWN fast after another. what follows is the recovery!
propov said:
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
Click to expand...
Click to collapse