Hi there, I know this may be a little bit stupid question for most of you, but I've already looked for this answer in the forum and found no topics about, including those manuals, etc. Well, my question is... I've bought a Xperia Arc S LT18a and it's still with its manufacturer firmware. I just wanna know if there is any way to know if this firmware is Global World, Global Iberia, Global HK, etc..?
Thank you guys!
type *#*#7378423#*#* choose service info/service info and look for "Line system version"
Found it!! Thank you lilude!!
HELLO
I have a new smartwatch but when i put my sim it doesn't work with my cell phone company ,
but with two other it works ,
anyway my question is :
what is the secret code for the service mode for the smartwatch DZ09 so i could enable the usage of the frequency 850 MHz .
thank you and have a nice day
me12 said:
HELLO
I have a new smartwatch but when i put my sim it doesn't work with my cell phone company ,
but with two other it works ,
anyway my question is :
what is the secret code for the service mode for the smartwatch DZ09 so i could enable the usage of the frequency 850 MHz .
thank you and have a nice day
Click to expand...
Click to collapse
The service code is *#3646633# or *#993646633# but as I know (I have checked DZ09 firmware) the service mode is pretty cleaned up of many useful things as "set network band" - even in this case you can do it by installing a GT08 compatible firmware (not all are compatible) or Iradish Y6 (any is compatible) and check first code (GT08) or second (for I9Y6), before any of these don't forget to make a full readback from 0x00000000 to 0x01000000 and save it somewhere safe, in case those kits are not matching with your phone you can get back to your working version
thank you
Golem_ said:
The service code is *#3646633# or *#993646633# but as I know (I have checked DZ09 firmware) the service mode is pretty cleaned up of many useful things as "set network band" - even in this case you can do it by installing a GT08 compatible firmware (not all are compatible) or Iradish Y6 (any is compatible) and check first code (GT08) or second (for I9Y6), before any of these don't forget to make a full readback from 0x00000000 to 0x01000000 and save it somewhere safe, in case those kits are not matching with your phone you can get back to your working version
Click to expand...
Click to collapse
hi Golem_
first thank's for sharing your knowledge with me
i have tried the codes *#3646633# or *#993646633# on my DZ09 but nothing happens ,
anyway i searched for the Iradish Y6 software to install it but i didn't find it (yet) so could you give me a link to download the software from it ?
regards me12
me12 said:
hi Golem_
first thank's for sharing your knowledge with me
i have tried the codes *#3646633# or *#993646633# on my DZ09 but nothing happens ,
anyway i searched for the Iradish Y6 software to install it but i didn't find it (yet) so could you give me a link to download the software from it ?
regards me12
Click to expand...
Click to collapse
before anything in <flash tool> please do a full <readback> from 0x00000001 to 0x01000000, this could spare you of huge amount of headaches in case your watch was produces with other type of components than common (a different type of display maybe for instance)
thank you
ok i got the iradish-y6
do you mean by " do a full <readback> from 0x00000001 to 0x01000000" like doing a backup to my smartwatch , i know how to do backup
if not can you tell me how to do a full <readback> from 0x00000001 to 0x01000000
and what ROM flash do you recommend to use
its my first time iam flashing a smartwatch
thank's
me12 said:
ok i got the iradish-y6
do you mean by " do a full <readback> from 0x00000001 to 0x01000000" like doing a backup to my smartwatch , i know how to do backup
if not can you tell me how to do a full <readback> from 0x00000001 to 0x01000000
and what ROM flash do you recommend to use
its my first time iam flashing a smartwatch
thank's
Click to expand...
Click to collapse
yes <readback> and backup are in a way in synonymy, yet <readback> is a command in <Flash Tool>
https://drive.google.com/folderview?id=0B_PhIaLE_-ogcXBFSEdXbzBZX0E&usp=sharing
These are tested fully working tools
Keep us informed!
hi
i tried but it shows me 0% and it is stuck like that
how to fix this
thank's
me12 said:
i tried but it shows me 0% and it is stuck like that
how to fix this
thank's
Click to expand...
Click to collapse
I've met your situation to a dozen of members around - same issue, driver installation. . .
Windows 7 and above doesn't like to much other's drivers, so against any logic after you install mtk drivers they are replaced with microsoft generic drivers, mostly I have fixed this problem opening device manager, click on ports, press action, add legacy hardware, install the hardware that I manually select from a list, next, have disk, go to your mtk folder and choose the inf, open, choose driver and ready
the same problem I have fixed just diconecting the computer from internet before to install them
For XP is simpler, go to mtk drivers, click right on the inf file and check install
Hope it helps
thank you
i want to install xp on my VMware Player
will it work because its on vm or it doesn't matter
thank you
me12 said:
thank you
i want to install xp on my VMware Player
will it work because its on vm or it doesn't matter
thank you
Click to expand...
Click to collapse
I don't have any knowledge about the virtual machines and their interaction with peripheral hardware
Hi there, I have released a new small utility - ReadBack Extractor - which could help any of you want to extract from a<Readback> ROM dump a full flawless firmware, to whom it may concern , check this link
http://forum.xda-developers.com/sma...readback-extractor-mtk6260-firmware-t3289272/
Please does anyone have the stock ROM file for apro q18 smart watch
i have the driver for dz09 in rar folder well its in my desktop any way.. if any one interested then just email me.. to connect to com port or some thing im not so sure what it does.. but its abit of help that i can offer
[email protected]
I forgot password of my dz09 please help.............. I put the password to 45665445 but he says wrong password every time please help me
Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?
APN
DJ ROLEX said:
Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?
Click to expand...
Click to collapse
You have to get the APN from your sim card network supplier, enter this in the Network connectivity on the watch. Note that some versions dont have a conectivity setting, but if it's asking for one , maybe just needs setting.
---------- Post added at 01:18 AM ---------- Previous post was at 01:07 AM ----------
DJ ROLEX said:
Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?
Click to expand...
Click to collapse
You have to get the APN from your sim card network supplier, enter this in the Network connectivity on the watch. Note that some versions dont have a conectivity setting, but if it's asking for one , maybe just needs setting.
how can i see my mtk version and firmware? i have dz09,but i don't have video player and connectivity setings. please help.
i have a dzo9 smart watch. That watch has no IMEI number please tell me the code to check IMEI number.
akhil nayk said:
i have a dzo9 smart watch. That watch has no IMEI number please tell me the code to check IMEI number.
Click to expand...
Click to collapse
*#06#
This code secreta work for mtk2502 is a no1 g6
I have tried this week to source my bootloader unlock code without paying for Dc..
I followed a load of links from XDA, Online to the Huawei site which should be possible but it just takes me to the home page and i cant see any where to register or obtain this boot loader unlock code.
I emailed Huawei and i get this email back so im not sure what they are asking me to do...!i sent them all the required details.
Huawei Customer Service is pleasure to be at your service,sorry to bring you the trouble,if you want to unlock your phone, you should meet these conditions as follow:
1.Please register your Huawei ID in our official website http://huawei.com/en/ on your phone.
2.Log in your Huawei ID on your phone for continuously 14 days.
3.Each Huawei ID should not apply for the unlock code more than twice within half years.If you meet the information,please go to http://emui.huawei.com/en/ and click the 'download'button to login your Huawei ID other than any other third party ID to apply for the unlock code.Please contact us by mail or local service hotline as following if error message appears.
TEL： http://consumer.huawei.com/en/contact-us/index.htm?tag=hotline
Mail： http://consumer.huawei.com/en/contact-us/index.htm?tag=email
Please submit your mobile model, SN, IMEI/MEID and erro message in your e-mail.We also need to know that your phone is rooted, it can be out of the best working state and part of functions may not be able to work normally. In additon, the system is vulnerable to be invaded by viruses once your phone is permitted to unlock. What's more, for the lacking of fully tested, the third party software will not be compatible with your phone. Unlocking will bring unexpected negative impacts and the device will be not normal, and can not be restored, Huawei after-sales service office will not provide warranty service for your rooted phone, and you may bear the cost. So we strongly advise you to think it twice.
If you have any other problems, please send your feedback to us. We will be at your service to help you to solve your problems.
Once again thank you for contacting Huawei device.
Best Regards.
Huawei Device Customer Care Team.(3210)
i cant see anywhere to unlock this device under the Huawei website at all and all links online just default to the homepage... can any one help a new to Huawei user to do this?
thread can be closed... just paid the 4 eur to DC....
why close? Why pay 4 everything?? Try Huawei tools...and try read forum or use search before asking multiple questions....
Odoslané z VNS-L21 pomocou Tapatalku
The devil is in details. F.ex. when you write model numbr from Settings->About phone you have to write it exactly as it is. Big letters etc.
I got the unlock code from the chinese site in a few minutes. Try it.
Huawei ( chinese or english ) site never worked for me, I've send 2 or 3 email to huawei and they send me my unlock code.
sonneper said:
Huawei ( chinese or english ) site never worked for me, I've send 2 or 3 email to huawei and they send me my unlock code.
Click to expand...
Click to collapse
I created a new account in the chinese site
I put the account (chinese) on my phone
After i went to the chinese site and put my account (so he couldn't say that in europe the site doesn't work)
Hi everyone
I just received my device from china and it took me long time to figure out the name of it. In the box the name is Huawei MLA-AL10
The problem is that the device is completely in Chinese
I managed to change the language to English thanks to translator of course
But i get stock with apps
I want to change the software region to any region rather than chinese, I searched here in this fourm but i couldn't find any help
Could you help me please how to change the region?
My device is 4GB of ram 64 Rom
Build number is mla-al10c00b159
Thanks
Any thoughts would help
Only suggestion would be root it and install open gapps.
I have a MLA-AL10C00. How can I change the region?
Different cust img flashed though bootloader I guess.?
i know its an old thread,
but i am writing for all those who are reading it till now
Lots of users contacted me after bricking devices in attempt to change region, so here is my message for all of you.
Guys don't change oeminfo on nova/nova plus, it will brick your network security
you are advised to consult phone specialist to change region of your phone.
its possible but it is complicated.
Good luck
Hi all nova's,
I found i think a good think to solve your problem with changing software and region.
Here a Tuto on youtube how to change them with a tool
" huawei multi-tool ".
To be clear, I haven't tested it ( on your own risk )
https://youtu.be/JyRCqO8BPgs
Warning this will brick your device, Huawei nova plus have Qualcomm chip and its different than kirin chip.
The only way is to get it done by some phone specialist.
https://www.google.com.pk/search?q=...ndroid-huawei&sourceid=chrome-mobile&ie=UTF-8
zaabolla said:
Hi all nova's,
I found i think a good think to solve your problem with changing software and region.
Here a Tuto on youtube how to change them with a tool
" huawei multi-tool ".
To be clear, I haven't tested it ( on your own risk )
https://youtu.be/JyRCqO8BPgs
Click to expand...
Click to collapse
Hi there!
I have a Chinese Honor 8 Lite (model PRA-AL00) and I would like to have it all in my own language (Swedish). The thing is that I can get most of it in Swedish when I go into Settings/Advanced settings/Language...
But in the setting below Huawei Swype I have some Chinese signs and it says Chinese/China. It's impossible för me to know what too do there.
I would prefer not to flash it. Maybe I can't change it and so be it. But it would be very nice to fix it.
Any help from someone more savvy than me?
The only thing you can do is to rebrand it to European variant
Hello,before you rebrand your phone ,can you send me the Chinese version oeminfo?Thanks