Is it possible to redirect the navigator voice (for example maps) to a bluetooth headset? im using desire z with ne newest cm7-nightly?
warp2 said:
Is it possible to redirect the navigator voice (for example maps) to a bluetooth headset? im using desire z with ne newest cm7-nightly?
Click to expand...
Click to collapse
Not sure about with your Rom, but an A2DP compatible Bluetooth Device will, without any changes on the phone, have the navigation, music and phone through the speakerphone, and prioritizes the audio so nav commands overide any other speaker output. The older speaker phones do not have A2DP and will not be able to have nav/music audio. They will only do phone audio The Blueant S4 and The Jabra Cruiser both did fine when I tried them out. The Blueant is much more mellow, but the Jabra is VERY loud and Crisp. I sometimes do music out, so I chose the Blueant..... E-bay has some for less than $49. Hope this answers your question!
Aloha !
BTMono
Look for BTMono in market. It might help You!
It put all sound over to bluetooth headset profile...
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Dear All,
I'm pretty new to this forum and to the Wizard as well.
I'm using Navigon Navigator 5.2 on my T-Mobile Vario which works quite well. I do have one issue, well more an incovenience, while using the headset.
When Navigon is active and I accept a call with my bluetooth headset all system sounds, including Paula2 the nice navi lady, is muted. The phone call itself is diverted to the headset.
That make sense as I don't want to have Paula2 on my headset but I would like to have her on the speaker.
Is there any way to have phone calls served by the headset and system sounds, including program sounds, played on the speaker?
Any help is appreciated.
Cheers,
Thorsten
Hi.
I have one HTC TYTN and one bluetooth headset but I only have sound in the phone function.
I don't have any sound with media player, ring tones and other sound programs, but with phone calls the BT (Bluetooth) works fine.
I can hear in HTC, but not in BT
I try with
NOKIA BH600
MOTOROLA H350
JABRA BT135
Is this a problem from my HTC or they don't work at all??
Thanks
Fmpm
BT only working with Phone
I have a similar problem. Tried with a Motorola HS850. BT Only works with the phone, not the PDA, and certainly not with Skype. Using the "Hands Free" profile.
Can anyone confirm a BT headset that works with the PDA side (i.e. Skype)?
I have also heard that BT headphones with AD2P profiles will work, but they won't fit in your pocket.
mixersoft said:
I have also heard that BT headphones with AD2P profiles will work, but they won't fit in your pocket.
Click to expand...
Click to collapse
Depends on what you mean by "pocketable". For example, my Plantronics 590A is collapsable and some other A2DP headphones don't have a headband at all.
Please DO check out my A2DP-related articles either on my blog or here in the General forum - I elaborate on these questions a LOT in there.
mixersoft said:
I have a similar problem. Tried with a Motorola HS850. BT Only works with the phone, not the PDA, and certainly not with Skype. Using the "Hands Free" profile.
Click to expand...
Click to collapse
Use either BlueMusic (see my related article on this title) or BTAudio (see http://forum.xda-developers.com/showthread.php?t=280353 )
fmpm said:
Hi.
I have one HTC TYTN and one bluetooth headset but I only have sound in the phone function.
I don't have any sound with media player, ring tones and other sound programs, but with phone calls the BT (Bluetooth) works fine.
I can hear in HTC, but not in BT
I try with
NOKIA BH600
MOTOROLA H350
JABRA BT135
Is this a problem from my HTC or they don't work at all??
Thanks
Fmpm
Click to expand...
Click to collapse
See above: BTAudio / BlueMusic will be your friend.
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
I recently got rid of the Motorola Q and no matter which bluetooth I used I had music playback over my headset. I used this with my Jawbone and my Jabra JX10 all the time. Is there anyway to enable that feature on the Verizon xv6800?
It's not A2DP, it just routes audio over bluetooth headset profile. Try something like this:
http://teksoftco.com/index.php?section=bluemusic
A2DP only works on an A2DP compatible headset.
Thank you so much with your help I found this http://www.freewareppc.com/communication/bluetoothaudio.shtml
Works perfect and its free....
NexVision said:
Thank you so much with your help I found this http://www.freewareppc.com/communication/bluetoothaudio.shtml
Click to expand...
Click to collapse
That is the same program I used before purchasing my BT8010 w/ A2DP. It was handy and used MANY times while travelling.
My BT8010 will not play music when paired with my 8925 and the other program mentioned here works but it crackles and is scratchy at times. Any input is appreciated. Thanks!