Related
A little over a month ago I flashed the damagecontrol ROM and haven't looked back. Aside from having 2.1 early, I was also able to access su features, blah blah blah. My question is: I am still losing internal memory even after enabling A2SD, partitioning my SD card into three sections (ext3, swap, and probably fat32 or something). I noticed a gain of about 40mb right away but each time I download a program my internal memory shrinks. Any ideas? I'm not a pro at this but really wanting to learn.
-------------------------------------
Sent via the XDA Tapatalk App
joshuaharp said:
A little over a month ago I flashed the damagecontrol ROM and haven't looked back. Aside from having 2.1 early, I was also able to access su features, blah blah blah. My question is: I am still losing internal memory even after enabling A2SD, partitioning my SD card into three sections (ext3, swap, and probably fat32 or something). I noticed a gain of about 40mb right away but each time I download a program my internal memory shrinks. Any ideas? I'm not a pro at this but really wanting to learn.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Even with A2SD there are still files that get written to internal storage for cacheing. You will see your memory go down.
Ah. I didn't realize that. Are there other ways to free up the internal memory? I'm down to around 25mb...
-------------------------------------
Sent via the XDA Tapatalk App
If you have a nice class of sd card you could move dalvik to sd. That freed up a good spot of memory for me.
the same thing is going on with my phone i only see an added 40mb onto the internal storage when i put on a2sd,when i hear about other kids that get around 90mb when using a2sd.
willowmp said:
If you have a nice class of sd card you could move dalvik to sd. That freed up a good spot of memory for me.
Click to expand...
Click to collapse
I just threw a 4GB Class 6 in and partitioned it. Before that I was running the stock 2GB (Class 2 I think). I've been considering a few options but not sure what the process should be and how to proceed:
- dalvik cache to sd
- jit compiling (alhtough, I've almost completely ruled this out due to rumors of instability issues)
- swapping sd (I'm not sure if this will have ill-effects on my system or not)
I would feel at more liberty to experiment if I knew what to do if my phone ran into an error that crippled it (i.e., stuck in boot loop). I'm really fresh to this, so it's a bit intimidating at first.
joshuaharp said:
I would feel at more liberty to experiment if I knew what to do if my phone ran into an error that crippled it (i.e., stuck in boot loop). I'm really fresh to this, so it's a bit intimidating at first.
Click to expand...
Click to collapse
Before you read one more post on this forum go install RA-Amon's recovery and make a nandroid backup. Then copy the backup folder onto your computer.
That is if you haven't already done so. This will save you a lot of trouble should something go wrong, unless you really do something spectacular.
Edit: Just checked my internal memory. 149mb free and I have a handfull of apps installed atm.
On another note I flashed the godmode overclocked kernel, the 768 one or whatever, and installed setcpu, and my god my phone is fast. Current settings are max 767, min: 518. Yes my min is fairly high but at 518 it is butter smooth and I have multiple batteries so...
willowmp said:
Before you read one more post on this forum go install RA-Amon's recovery and make a nandroid backup. Then copy the backup folder onto your computer.
That is if you haven't already done so. This will save you a lot of trouble should something go wrong, unless you really do something spectacular.
Edit: Just checked my internal memory. 149mb free and I have a handfull of apps installed atm.
On another note I flashed the godmode overclocked kernel, the 768 one or whatever, and installed setcpu, and my god my phone is fast. Current settings are max 767, min: 518. Yes my min is fairly high but at 518 it is butter smooth and I have multiple batteries so...
Click to expand...
Click to collapse
This kernel (.29 kernel, right?) is one I've been recently considering. I've made a nandroid backup through ROM Manager (is this as good as RA-Amon's recovery?). I'm not sure what to do with this should something go wrong...unless I can boot up and have access to the ROM Manager app – I'll cross that bridge when I come to it. Some questions:
concerning flashing a recovery
- what exactly does this do? (as I understand it, it writes a recovery file to my sd card, so that i can boot up in recovery mode should something cause my os to fail...is this correct?)
concerning the godmode overclocked kernel
- how long have you had this flashed on your phone?
- can I flash over my current ROM (damagecontrol 2.08.1)?
- will I lose info and have to wipe everything not on my SD card?
- I've partitioned my sd card for A2SD, will this cause problems?
- how long is your battery life on average?
Thanks dude.
willowmp said:
Before you read one more post on this forum go install RA-Amon's recovery and make a nandroid backup. Then copy the backup folder onto your computer.
That is if you haven't already done so. This will save you a lot of trouble should something go wrong, unless you really do something spectacular.
Edit: Just checked my internal memory. 149mb free and I have a handfull of apps installed atm.
On another note I flashed the godmode overclocked kernel, the 768 one or whatever, and installed setcpu, and my god my phone is fast. Current settings are max 767, min: 518. Yes my min is fairly high but at 518 it is butter smooth and I have multiple batteries so...
Click to expand...
Click to collapse
What did you set your swap and ext on when you partitioned your sd
xxxk15 said:
What did you set your swap and ext on when you partitioned your sd
Click to expand...
Click to collapse
ext: 1024 (or whatever the first 1gig choice is, I believe it is something like this)
swap: 30 (I believe, or whatever it automatically pops up as when formatting)
Through Dconfig I have apps2sd, dalvik to sd, and sd swapping with the default 30mb enabled.
Dalvik heap is set to 16mb and lowmemkiller set to less. JIT not enabled.
Current version DamageControl, the 768 overclocked kernel and toast's newest radio.
joshuaharp said:
This kernel (.29 kernel, right?) is one I've been recently considering. I've made a nandroid backup through ROM Manager (is this as good as RA-Amon's recovery?). I'm not sure what to do with this should something go wrong...unless I can boot up and have access to the ROM Manager app – I'll cross that bridge when I come to it. Some questions:
concerning flashing a recovery
- what exactly does this do? (as I understand it, it writes a recovery file to my sd card, so that i can boot up in recovery mode should something cause my os to fail...is this correct?)
concerning the godmode overclocked kernel
- how long have you had this flashed on your phone?
- can I flash over my current ROM (damagecontrol 2.08.1)?
- will I lose info and have to wipe everything not on my SD card?
- I've partitioned my sd card for A2SD, will this cause problems?
- how long is your battery life on average?
Thanks dude.
Click to expand...
Click to collapse
RA-Amon's custom recovery is a must and is vastly more important than a back-up app. RA-Amon's recovery is an actual recovery image, thus as long as your phone boots up to the HTC logo you should be able to access RA-Amon's recovery and thus restore the backup before the phone is even accessing the rom.
Flashing a recovery image is like flashing a rom, but instead of a rom you are flashing a recovery image. Your phone has a stock recovery image on it right now, I don't know the key combo but hold a certain pattern of keys down while turning the phone on and you will enter it. It looks I think like a triangle with an ! in the middle or something. This is sorta useless for us though because I don't think you can really do much with it.
When you flash a recovery img (RA-Amon's) that stock recovery image is just replaced with Amon's. After you do flash the recovery holding the HOME and power button to turn the phone on and continuing to hold it will cause you to enter Amon's recovery, which is a green menu. From this menu you can amke backups/restore them, wipe the data on the phone (factory reset), flash .zips (roms, bootscreens, themes, kernels) and other things.
What you are referring to the writing backup to sd card is called nandroid. Nandroid is an option in the recovery, so yes if you do flash the wrong rom or your phone won't boot up (boot loop or whatever) as long as you can access recovery which is one of the first things loaded when you hit the power button (unless you really do something spectacular like flashing a gsm hero's radio you almost always will be able to get into recovery. don't even touch radios right now, flash the wrong one and your phone won't even turn on/charge. aka your motherboard will be totaled) so you will almost always be able to nandroid recovery your os if something does go wrong.
In short before you do anything flash the recovery.
Now on to your other questions. I have been running the overclocked kernel for one day, but it appears stable and seems to be working good for me. When you flash a kernel you always flash it over a rom, because if you do it the other way the rom will replace the kernel. So yes once you have damagecontrol or another rom that supports that kernel you can simply go into recovery and use flash .zip to flash the kernel over the rom. As always make sure to make a nandroid before doing so.
DamageControl supports apps2sd, and you enable it to use a2sd using the Dconfig app that is included in the rom. It is generally a good idea to partition your sd card whenever you switch between roms unless they say it is fine. You should go ahead and copy over a backup of your sd card to your computer, however you need not format or wipe your sd card when flashing roms. Honestly I don't think you need to partition your sd card again, unless after you flash the rom the os won't boot up all the way or loops/crashes. If it does then partition the sd card and try rebooting the phone and it should fix it.
Also you can format and partition your sd card in recovery under Other.
As for my battery life I have been switching b/w roms and such and I just started using the OC kernel, but with the DamageControl rom back when I only had that flashed my batt life was good.
However I do have 3 batteries and an external battery charger for my phone. Check out the accessories section of this forum, 2 batteries and the charger for 11 bucks from Hong Kong on ebay.
Hope I helped.
So, through the damagecontrol dconfig app I banned "sense", rebooted and now my phone is stuck in a bootloop. Do I restore from previous nandroid backup or do I need to flash my phone? Suck.
joshuaharp said:
So, through the damagecontrol dconfig app I banned "sense", rebooted and now my phone is stuck in a bootloop. Do I restore from previous nandroid backup or do I need to flash my phone? Suck.
Click to expand...
Click to collapse
Just want to say first off: "I am an idiot". Nandroid backup from 5 days ago, booted up by holding *home and *power, then selecting to restore. Very easy. I can actually breathe now. Back in business. Sorry to waste your guy's time. We can keep the thread going minus my drama...
joshuaharp said:
Just want to say first off: "I am an idiot". Nandroid backup from 5 days ago, booted up by holding *home and *power, then selecting to restore. Very easy. I can actually breathe now. Back in business. Sorry to waste your guy's time. We can keep the thread going minus my drama...
Click to expand...
Click to collapse
It's all good.
See why I emphasized flashing your recovery before messing with anything? xD
xxxk15 said:
What did you set your swap and ext on when you partitioned your sd
Click to expand...
Click to collapse
I set the swap to 32mb and ext3 to 512mb I believe...does this sound right?
willowmp said:
RA-Amon's custom recovery is a must and is vastly more important than a back-up app. RA-Amon's recovery is an actual recovery image, thus as long as your phone boots up to the HTC logo you should be able to access RA-Amon's recovery and thus restore the backup before the phone is even accessing the rom.
Flashing a recovery image is like flashing a rom, but instead of a rom you are flashing a recovery image. Your phone has a stock recovery image on it right now, I don't know the key combo but hold a certain pattern of keys down while turning the phone on and you will enter it. It looks I think like a triangle with an ! in the middle or something. This is sorta useless for us though because I don't think you can really do much with it.
When you flash a recovery img (RA-Amon's) that stock recovery image is just replaced with Amon's. After you do flash the recovery holding the HOME and power button to turn the phone on and continuing to hold it will cause you to enter Amon's recovery, which is a green menu. From this menu you can amke backups/restore them, wipe the data on the phone (factory reset), flash .zips (roms, bootscreens, themes, kernels) and other things.
What you are referring to the writing backup to sd card is called nandroid. Nandroid is an option in the recovery, so yes if you do flash the wrong rom or your phone won't boot up (boot loop or whatever) as long as you can access recovery which is one of the first things loaded when you hit the power button (unless you really do something spectacular like flashing a gsm hero's radio you almost always will be able to get into recovery. don't even touch radios right now, flash the wrong one and your phone won't even turn on/charge. aka your motherboard will be totaled) so you will almost always be able to nandroid recovery your os if something does go wrong.
In short before you do anything flash the recovery.
Now on to your other questions. I have been running the overclocked kernel for one day, but it appears stable and seems to be working good for me. When you flash a kernel you always flash it over a rom, because if you do it the other way the rom will replace the kernel. So yes once you have damagecontrol or another rom that supports that kernel you can simply go into recovery and use flash .zip to flash the kernel over the rom. As always make sure to make a nandroid before doing so.
DamageControl supports apps2sd, and you enable it to use a2sd using the Dconfig app that is included in the rom. It is generally a good idea to partition your sd card whenever you switch between roms unless they say it is fine. You should go ahead and copy over a backup of your sd card to your computer, however you need not format or wipe your sd card when flashing roms. Honestly I don't think you need to partition your sd card again, unless after you flash the rom the os won't boot up all the way or loops/crashes. If it does then partition the sd card and try rebooting the phone and it should fix it.
Also you can format and partition your sd card in recovery under Other.
As for my battery life I have been switching b/w roms and such and I just started using the OC kernel, but with the DamageControl rom back when I only had that flashed my batt life was good.
However I do have 3 batteries and an external battery charger for my phone. Check out the accessories section of this forum, 2 batteries and the charger for 11 bucks from Hong Kong on ebay.
Hope I helped.
Click to expand...
Click to collapse
Dude...helped IMMENSELY! I'm still digesting it.
That's good to know about flashing radios. I was going to flash the most recent one for 2.1 roms on CDMA heros, but I think I'll wait to hear more about it.
I think I feel comfortable flashing the .29 kernel over my current ROM. I gotta be honest though, the DConfig thing kind of weirds me out now, after trying to use it. I'm not sure which button is going to cause my phone to freak out.
If you have a nice class of sd card you could move dalvik to sd. That freed up a good spot of memory for me.
Click to expand...
Click to collapse
I'm considering doing this but have read that this causes issues with nandroid backup. Have you experienced this?
-------------------------------------
Sent via the XDA Tapatalk App
This may "wreak of non-search" and I am sorry if it does. While I have searched, the overall panic that one experiences when you suspect a brick and cannot afford to have a brick.... (that, plus a friend purchased this Glacier for me to help me get back on my feet with respect to career/employment, etc., so a good amount of guilt is thrown into this mix)... all prevents me from rationally and methodically searching thread after thread to figure out why I am having the problem I am having.
I will be as precise as possible.
1. Back in Feb., I perm rooted with visionary... then about 2 weeks later, I read that this root was not true radio s=off perm root, so I used adb and the scripts to perm root again--using the wiki as a guide. Saved a copy of the partition 7 bin on my laptop as an added precaution. Also, BTW, I never flashed the engineering HBOOT. It didn't seem essential to do so... PLUS, in almost every guide it warned that this was the most likely chance for one to f*ck up and brick, so in the interest of erring on the side of caution, I skipped that.
2. I kept stock ROM for several weeks after that... just enjoying root and freezing bloatware with Ti, and doing other root-enabled mods... nothing too involved.
3. About 1 week ago, I finally decided to flash my ROM. I had Rom Manager (paid version), and had flashed ClockworkMod Recovery 3.0.0.5. Further, as an FYI, I had/have numerous nandroid backups on the SD, plus several Ti backups of apps/data... even sync'd this with dropbox, so I can access those now (which are not of any help obviously).
4. I first flashed a CM7 nightly build--wiped data and cache, and as far as I know followed the guides precisely. All was well...new ROM worked alright... some bugs, but it was nice to have the new features, etc.. And of course the mental gratification of having 2.3.3 (GB) instead of 2.2.1 (boring old froyo). I updated the nightly maybe 2 times... in each case, I simply flashed without backing up those ROMS or wiping data/cache as they didn't seem necessary, plus I still had all my stock rom nandroid backups on the SD.
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Since I cannot get into the phone... I am of course panicked... I have ADB on my laptop if needed, but I really am at a loss as to why this happened, and what I can do at this point....
Please, please advise. My utmost appreciation and sincerest gratitude in advance for any assistance.
Thank you!!!
syntropic
syntropic said:
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Click to expand...
Click to collapse
Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
should come up to a white screen.
take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Sent from my HTC Glacier using XDA App
Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
Click to expand...
Click to collapse
No... that is what I meant when I said tried to "boot into recovery". And I got the 3 vibrate alerts and a blank screen, and nothing........
take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Click to expand...
Click to collapse
Will do... Thank you. DO you have any idea of where I f*cked up here??
Could be a number of things. Like wipe didn't go through completely , bad download, or just random crap out like a few others. Even flashing with the wrong cwr version can less to your issues. Lol like I said could be a number of things. Sorry I couldn't be more helpful.
Sent from my HTC Glacier using XDA App
OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....
I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Sent from my HTC Glacier using XDA App
syntropic said:
OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....
Click to expand...
Click to collapse
What recovery are you using? 3.0.0.5? and you're trying to flash a 2.2 ROM. Thats where the problem lies. See my post regarding this. It's in my signature, the green one.
I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Click to expand...
Click to collapse
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
EDIT: MUSTKll20... Well, you were right... This is not ROM specific. I tried Re-Flashing RC3, which previously worked fine. Now, since I have CWModRec 3.0.0.5, I need to use a 2.3 ROM.... So I thought I would start with this idea. So, I guess, I need to get whatever is corrupt deleted... So my only question thus remains: How do I wipe everything except the SD from within CWR?
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!
syntropic said:
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!
Click to expand...
Click to collapse
You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
and android phone have a method of using a section of the SD card for their memory banks. I'm not really sure how it works either, but it does. You can wipe the internal w/o wiping the SDcard.
Wiping the phone from with in the recovery image will not touch the SDcard, it will only wipe the internal. You can format the SD card from the Recovery Image, but i'll leave that dog sleep so we do not it accidentally.
last little clean-up question.
Sorry to bump this... last LAST question...
Mustkll20: I realized that you were correct to suggest to wipe everything except the SD... Something is corrupt.
But I am not real sure exactly how to wipe EVERYTHING except the SD, from within CW recovery... Since that is the only mode I have available to me. Once I wipe, I will reinstall CM RC3, then update Clockworkmod Recovery to 3.0.0.6, and then try and download RC4 again using another method, and re-flashing.
I would trial and error this, but do not want to wipe the SD.
Thanks guys... seriously.
You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
Click to expand...
Click to collapse
I didn't see your reply... ummm. and I do need to wipe.. Because I have tried to re-flash both RC3 and RC4, and I get what must be a "bootloop": During the CM splash, it stops and then reboots---over and over. It never did that before.... so my problem is something else...
I don't know what else there is besides the SD and the ROM, but whatever it is, I need to delete it. So should I do a factory reset???
Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.
lowandbehold said:
Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.
Click to expand...
Click to collapse
Yep... I know the thread is not for thrillseekers (i.e., its boring), but I mention that I discovered this phenomenon... so I really wasn't in all that bad a spot to begin with.
I still need to figure out how to fix my current problem.... all CM RCs (I can only flash 2.3 ROMs because of CW 3.0.0.5) go into what I guess is a bootloop. In other words, they do not ever boot, just crash and restart. And the RC3 ROM I used worked fine before this... so something else is causing this problem. I need to wipe everything I guess, but I just don't know how... without touching the SD card and from within Clockwork Recovery.
Ok. Go into recovery.
1. Wipe data/factory reset
2. wipe cache partition
Both of these are on the main screen.
Go to advanced
3. Wipe Davlik Cache
Go back to main screen
Go into mounts and storage
4. format boot
5. format system
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.
lowandbehold said:
Ok. Go into recovery.
{...}
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.
Click to expand...
Click to collapse
Thank you for the concise and thorough response!!!!!!! Id thank you, but have used up my allotment. get ya tommorow!!
And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?
syntropic said:
And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?
Click to expand...
Click to collapse
You can thank the Google c&d order for that. Go to cyanogenmod.com. there is a link there for the gapps zip.
Sent from my HTC Glacier using XDA App
OK... I thoght Gapps.zip was just Google Docs. Luckily, I had that on my SD card from one of my many ROM downloads. I see why they had to make it separate.
But I am installing it, and everything is great... And I learned a lot too... Which can only mean trouble.
Thanks!
Self-dangerous noob here. NC 1.2, theoretically returned to stock
History:
Got NC 1.2
Rooted w/ManualNooter 4.5.25. Everything seemed to go great. So...
Downloaded, backed up, and flashed CM7 in ROM Manager
Wouldn't boot...hung on n COLOR screen
Same results w/ Phirerom (CM7 based - doh)
Able to restore MN4.5.25 from CWM - BUT noticed "Error formatting /data!" during nandroid restore. Didn't seem to matter...restore successful
Get "Error formatting /data!" no matter what
Able to boot into CM7 from SD, but it has "problems". For instance, there are no "back" or "return" softkeys. So there is no way to navigate around any app! Only the hard "n" home key works
Reflashed stock 1.2
Seemed to work, began to ask me to reregister. BUT, it won't display the keyboard, so I'm stuck at the "Login with your existing B&N...." screen! Keyboard flashes up and then immediately disappears!
As an noob, it occurs to me that all my problems are related to my inability to format the /data partition (if it's even called a partition).
Can any of you awesome people help me? And, if I'm in the wrong forum, any directions would also help. Thanks.
Same error here
If anyone can help with this it would be much appreciated.
have you tried removing CWR then do the 8-boot reset?
No, every time I've done it, it boots into CWR. Maybe REMOVING it will help. lol. Sorry to be so inept. I can flash the 1.2 stock that will remove CWR. Is that the way to do it?
Worked like a charm
Removing CWR and 8-boot-interrupts did the trick. I'm now back to a fully stock NC 1.2.0. Ready to roll up my sleeves and re-brick!
This is the most amazing community. The closest thing I have to any technical knowledge is speaking a little Klingon. VERY little. But, I have learned more here by reading these threads for a couple hours...OK, several hours... than my wife has learned in a dozen trips to the apple store. I feel more empowered every day. You are all great. Can't thank you enough.
Goldie, I wasted a bunch of time on this last night. I'm guessing you have a new nook. If you do, slap cwr on your SD (3.0.2.8 or something) and look for the thread that tells you how to repartition your nook. Follow instructions to set it to the old way. After that run manualroot zip through cwr. Reboot to cwr and wipe data, system, cache. Finally install your rom of choice from your SD card through cwr. That's what I did to finally get it to work.
Thanks. I'll give this a try. As you probably guessed, I DO have a new NC, and while I was able to get it back to 100% stock, and easily reregister it, I had the same results. The ONLY way I can get CM7 running is off the SD card. So, I'll try the partitioning trick. Why do I get the feeling this is going to work? Unfortunately, I'm not on dev's time... I'm at work by 7:30am EDT, but in bed pretty early. I REALLY appreciate the response. Later this week I'll install SDK, and all my tools at home so I'll be able to stay up all night with you awesome folks.
still looking for the thread on re-partitioning. I found the thread on restoring, but I get the error every time I try to reformat the /data.
No luck. I can restore to stock 1.2, reregister, and MN 4.5.25, all easily. BUT, once I flash CM7 (or Phiremod 6.3, etc.) it hangs at the "n C O L O R" screen (C O L O R flashing at various speeds just to fool you into thinking it's actually going to work). Here's what I've noticed...after flashing CM7, the ADOBE screen no longer flashes up at boot. Once it fails to boot the Adobe software, it won't boot at all. So, for now, I guess I'm running CM off my SD unless anyone can suggest anything.
Goldie u have to repartition to get it working. Ill go look for the thread. Also maybe you should try out the cm7 mod over the phiremod Tom. I'm on phiremod now and the lag is killing me
Wow that was painful to find. Needs a sticky.
http://forum.xda-developers.com/showthread.php?t=1094371
Edit: I take that back about the lag, set your cpu to 1200 in the ROM and change yourgovernator to interactive for an amazingly smooth experience
I've been going nuts trying to figure this out. I too ran into the "error format /data" message but I powered through it only to end up at at the Android logo--nothing. Out of frustration, I returned to CWR and wiped everything--like on my Evo (did not go through to mounts option). That seemed to go through /data but I don't know the difference between a wipe and a format (I'm looking...). Still got bootloops. I tried to return to stock but the 8 interrupts wouldn't work.
Pressing START and N worked though and that got through to CM7 and it's working great now but I'm afraid to do anything else because I still get the "error formatting /data" message.
I've heard horror stories (bricking beyond repair--if that's possible) of users repartitioning their drives though so... I hope there's another solution out there.
I love this community!!
Sys:
Thanks a million!! Everything perfect!! I just can't say enough about this awesome community, all the amazing devs.
heh you're more than welcome . i hope this helps anyone else that stumbles on your thread as well. Ive been having fun with my nook but i think its time to trade it out for something a little bigger. Maybe ill just wait till att gets its flavor of gs2 idk. So many choices out there!
thanks guys!
i just had the same problem and falshes all kinds
of zips until i found this post.now i've launched cm with status bar
really really thanks
this worked great for me too! i had a nookcolor bought in december and it had a messed up chargerand 6 really bright white spots that were really noticiable. went to b&n store and the guy just gave me a new one. it came with 1.2 and i had the cwm sd from the old one. so tried restoring my cm7 backup from the old one and error formatting data came up. flashed this zip, and im wondering, since these are too different nookcolors, should i restore the cm7 backup or flash it brand new. because i had a ton of stuff on the old one and i dont want to lose it. so can i ust do advanced restore and restore data, or can i restore the whole thing or just flash and slowly get my stuff back?
update cwm
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
bl3achcrazy said:
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
Click to expand...
Click to collapse
i have tried 3.2.0.1 but get same error message
3.2.0.1 on the bootable card or already on the eMMC? It has to be on the bootable card.
Thanks
It works after getting my nook color around 2pm today and taking it home. I was working on this thing all day I tried several ways and this one worked!!! Having issues with wifi that's all
I had honeybadger cm7 nand on my android and decided to switch to typhoon cm7 cause I was told it would be more stable. I followed the guide carefully and when everything was finished and I went to restart my device it wouldn't go past the blue android when booting up. Please help
how long did you wait? some ROMs can take 10-15 mins to fully boot up. some say even longer but i've tried just about them all and haven't came across one that was over about 15 mins. plus if you didnt partition your phone or sd correctly (if the ROM called for it) then it could get stuck on the boot screen as well. the HD2 NAND Toolkit is rather useful if you need to partition your phone. you can find that here. i personally like minitool partition software which makes partitioning your sd card very simply to do and you can get that here.
you should know that you need to make sure you flash the correct ROMs to your phone because if you flash one thats not meant for your phone you could ruin it for good. i know that when your first learning this process it can be very frustrating but if you take some notes and be patient you'll fully understand everything in a short time.
I actually waited for about 2 minutes, wasn't aware you're suppose to wait longer. Should I try to reflash and wait for 15 minutes?
Clear data and caches factory reset them reboot
Sent from my HTC HD2 using XDA App
did you unlock the phone first?
is there the correct radio on it?
I regularly get typhoon not getting past the boot animation on first boot, even with all the partitions cleared, I just leave it a few mins,(two,three) then pull the battery and it generally starts.
If you are planning to selectively restore ext and/or data you should clean boot the fresh flash all the way and then reboot and perform the restore.
My apologies for what is (hopefully) a simple or obvious issue and shortcoming on my point. I've used xda to flash my very first custom ROM, and managed to get things sorted without having to resort to asking you, the assembled phone-modding-guru's but I'm at a loss and don't want to dig myself in any deeper and make more of an issue of this than it already is.
I've got a UK HD2 with a sandisk ultra 32gb micro sd (with a 2 gb partition) and the ROM, Android 4.0.4 On HTC HD 2 NexusHD2 HWA V2.7
All was good and I'd even managed to overcome the lack of internal memory by installing Link2SD and placing the new Apps on the SD card. All was good until this afternoon when I set up a recovery app (or whatever it was classed as) in Avast.
I kept getting a message saying that something had crashed then Avast started flagging issues and finally, things refused to connect to the WIFI - google chrome, the stock browser, google play store. I tried following some instructions on various forums (stop google from syncing) after typing out what the prompt was but then my broadband went down and I lost what I'd typed.
I tried to restart my HD2 but then it refused to boot up. I managed to find that this is called the Boot Loop and followed through this thread Please Help!!! HD2 Boot loop, making a recovery which I've stored on my pc (I took out the sd card and used an adapter to connect it) and used the zipped ROM that was on the sd card but alas, back to the boot loop.
I've checked the battery pins and non are bent, although the one on the right hand side does seem to be a tiny bit shorter than the other two (I'm talking fractions of a mm) and checked to see that I'd mounted the SD card.
So, I guess my question is, where to go from here?
Well I don't know if it was the ideal way to sort things but after following the instructions on another site, I managed to get rid of the boot loop but now can't access the apps through Link2SD...
For future reference, if anyone else is unfortunate enough to have this issue, have a go at following this...
pull the battery, put it back in, hold down call-end whilst booting to boot into to MAGLDR, launch AD recovery, clear the cache partition, clear the dalvik cache, clear the battery stats and fix permissions then restart, I have to at least clear the dalvik cache every single time I reboot ANY android nand rom on my hardware (LEO512-TELSTRA) otherwise mine boot loops or just gets stuck on the black background and green htc.
try also Fix Permissions under advanced and "wipe data/factory reset" options in the AD recovery menu's
I do NOT use EXT4 partition, there could be something screwy on your card though, try booting it up without your SD card in, if it boots then you know there's something crap on the card you need to clean up
I'm unsure about being able to post external links on here (this is my first post after all, and one borne out of panic!) so if that's a no-no then please accept my apologies once more but I thought that if this can help one person, it was worth me writing this last part!
check out the links below, it might help
steps in the procedure is important to follow
mengfei said:
check out the links below, it might help
steps in the procedure is important to follow
Click to expand...
Click to collapse
Thanks but non of those contained anything specific to my problem - I've looked through each one at different times.