Dear all HD2 professional,
I got a problem with my HD2 after flashing with a MAGDLR113, it has successful message on my pc, but when my phone restart it always stuck on htc logo.
i search with many forum in xda and try, but still not luck.
My problem is it stuck with htc logo when phone is open. although I try to hard reset (hold vol down + up + power) or (hold down + power), and connect to PC, it do nothing, it still at htc logo.
Now, I don't know what I'm going to do next?
please anyone give me an advice to fix it?
thanks,
dane
You probably didn't set correct radio or spl,, magldr wont boot without 2.08.hspl AND radio 2.07.50 - 2.15.50,,,
Get them both right, magldr will start
thanks samsamuel,
But
Could you tell me how to set radio or spl... or give me a link to do that?
Because I was stuck on htc screen, I can't get out from it.
thanks again,
You already set the spl, that's how you flashed magldr.
Enter bootloader, connect USB, flash the radio, magldr will now start.
here,read this http://forum.xda-developers.com/showthread.php?p=11097380
A few wrong / confusing / potentially dangerous (to tmous) steps listed in that thread. A good read with good links, but use it to help understand the process, not as a definitive guide.
(Example, it says if you have spl 3.03.0000 you should flash a stock rom to give spl 1.42.0000,,,,,, this step would brick a tmous,, when all you needed to do was use Hspl4 to set either 2.08.hspl,, or if the warning about not using Hspl4 scares you, use Hspl4 to set any spl, and then use hspl3 to set 2.08.hspl)
As with all threads, take the info on board, then confirm what you learned by reading other threads.
Many threads are slightly out of date, and so although the info is useful, its not always the easiest / best.
I think you need to root your phone. search on addictive tips.com, you will find step by step tutorial on how to root your phone and install android
Thanks guy,
But i still can't Enter to bootloader.
it should hold voldown + power, it still in htc logo and I didn't see any else even I try again and again. what problem with that or my phone got another problem?
sorry for my misunderstanding.
callme_dane said:
Thanks guy,
But i still can't Enter to bootloader.
it should hold voldown + power, it still in htc logo and I didn't see any else even I try again and again. what problem with that or my phone got another problem?
sorry for my misunderstanding.
Click to expand...
Click to collapse
Remove the battery then ofcourse put it again and do your thing (volume down + power) "hold both":fingers-crossed:
Related
Hello all,
I was trying to get android booting from NAND instead of the SD card, I got a rom with 576ram (recommended) and installed MAGLDR 1.11. Now i cant seem to do anything with the phone, its not bricked as par say, it will show the loading screen and then not move and i can access the bootloader with voldwn+powerbutton but nothing else is happening, I cant load new roms nothing. Im pretty lost here and really need some help of how i can get my phone back onto a winmo6.5 rom so i can remember not to try it again
I posted this in this thread as it does relate to an android situation.
norodaigh said:
Hello all,
I was trying to get android booting from NAND instead of the SD card, I got a rom with 576ram (recommended) and installed MAGLDR 1.11. Now i cant seem to do anything with the phone, its not bricked as par say, it will show the loading screen and then not move and i can access the bootloader with voldwn+powerbutton but nothing else is happening, I cant load new roms nothing. Im pretty lost here and really need some help of how i can get my phone back onto a winmo6.5 rom so i can remember not to try it again
I posted this in this thread as it does relate to an android situation.
Click to expand...
Click to collapse
Find Task29.exe with no radio. It's on this site somewhere. You will see some with radios attached to them, so don't use those. Just the plain old no radio version. It will wipe your phones internal memory and you will basically be starting from scratch. Nothing will be on your phone after a Task29. Then go into bootloader. How to enter boot loader after Task29- Once Task29 hits 96% (looks just like you are flashing a rom), hold volume down and power from 96% until it gets to 100% and the tri color bootloader screen pops up. It should say "USB" at the bottom after bootloader comes up if you are plugged into your computer. Then Flash MAGLDR 1.11 again. Then flash your NAND build.
You aren't bricked if you phone powers on.
What operating system is on your PC?
Well it does boot and if you have hspl you did a good job. So if you have magdlr you now need to install Android. Read a guide plzzz!
Sent from my HTC HD2 using XDA App
OS on PC is....#sigh# windows vista ultimate
For task 29 do I have to have the phone connected via usb, because its not recognising it when its even in bootloader
task29.exe didnt work
Don't do task 29,you will just complicate your life even more than now. I don't think you know what you are doing.
You may brick your phone in the end do you have HSPL?
Sent from my HTC HD2 using XDA App
crisisinthecity said:
Find Task29.exe with no radio. It's on this site somewhere. You will see some with radios attached to them, so don't use those. Just the plain old no radio version. It will wipe your phones internal memory and you will basically be starting from scratch. Nothing will be on your phone after a Task29. Then go into bootloader. How to enter boot loader after Task29- Once Task29 hits 96% (looks just like you are flashing a rom), hold volume down and power from 96% until it gets to 100% and the tri color bootloader screen pops up. It should say "USB" at the bottom after bootloader comes up if you are plugged into your computer. Then Flash MAGLDR 1.11 again. Then flash your NAND build.
You aren't bricked if you phone powers on.
What operating system is on your PC?
Click to expand...
Click to collapse
1st try entering the BOOTLOADER, by pressing the volume down power button simultaneously..!!!
Instead of TASK 29, try FLASHAHOLIC which will perform your TASK 29 & help you flash a WinMO 6.5 ROM as well..!!!
PS: - You can even flash custom ROM's, stock ROM's not compulsory..!!!
norodaigh said:
OS on PC is....#sigh# windows vista ultimate
For task 29 do I have to have the phone connected via usb, because its not recognising it when its even in bootloader
Click to expand...
Click to collapse
Well then re-install Active SYNC or try on a diff PC with Latest Active SYNC..!!!
If you can access your boot-loader your device ain't bricked..!!!
Just boot your phone with VolDown and enter USB mode, reflash MAGLDR 1.11, once this has completed reboot your phone and hold down the power button, you will then see the MAGLDR menu.
Then just follow instructions on how to install an nand rom
http://forum.xda-developers.com/showthread.php?t=893948
it might just be the magldr or NAND ROM not flashed properly. If you can get to Tri-Color bootloader you are fine.
Found out the problem, thanks for all of your help guys, it was the fact i didnt have hspl2 installed....newb points to me
I have exactly the same problem only difference with my problem is when hold vol down and power buttons all I get is the tri coloured screen and nothing else no bootloader menu appears at all.
What can I do? Is my phn dead???
barryhd2 said:
I have exactly the same problem only difference with my problem is when hold vol down and power buttons all I get is the tri coloured screen and nothing else no bootloader menu appears at all.
What can I do? Is my phn dead???
Click to expand...
Click to collapse
That's exactly what is supposed to happen if you hold the vol down button while switching on. To get to the magldr menu you need to hold the power button in until it boots to the menu (no vol down button )
You guys are awesome!
I've been avoiding dealing with this phone for a while. This post came up first on google search. Held power and volume (mag 1.11 was on it) and upgraded it to 1.13 and now I'm golden! Thanks guys!!!!!!!!!!!!!
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work
a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?
Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?
Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Doesn't Work
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D
LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!
same problem doesnt work
WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?
Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App
unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)
help!i have the really same problem!thx!
This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card
could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.
Also post in the right section in the future
All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
load the hard SPL than magledr than rom it works 100%
Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?
Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards
my volume key not work and now i cant use the bootloader,please
hey anybody here??????????????
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127
Hi All,
For the past few months I've been running a DFT NAND build of Android. Yesterday, the phone was running extremely slowly with some odd behavior in the Android menus. When I restarted the phone, loading got as far as the DFT splash screen but then nothing else would happen.
I have since used MAGLDR (1.11) to attempt to boot a fresh Android image from SD card but this hasn't worked. Have managed to use the USB Loader to attempt to flash another NAND build (both Android and WP7) but even though the download process completed, this still didn't work and am stuck in MAGLDR now.
Have read through the forums here and have tried most (if not all) of the suggestions, however nothing seems to be working.
Can anyone offer anymore advice?
Thanks,
Kev
As MAGLDR gets removed if you flash a stock winmo rom I suggest you to try that!
Before you install the winmo rom you can also use Task29 to completely wipe the nand.
good luck
Thanks,
I shall give that a try this evening.
Kev
Unfortunately none of the suggestions have worked. I'm unable to flash a stock WM6.5 ROM as the RUU doesn't detect the phone.
The device does show up in Windows as a Microsoft USB Sync device, however.
Task 29 does not work either due to the same problem.
I've attempted to flash a new Android ROM release but when the phone reboots, it gets stuck on the green HTC logo screen and won't proceed any further.
I don't seem to be able to get MAGLDR 1.13 on the phone either, as DAF.exe complains about some "Config load failed" error.
Any other suggestions?
Thanks in advance,
Kev
*sigh*
you need to read up on "how to flash stock rom from sd card". no need for RUU i believe; sd card method involves copying a file extracted from the stock RUU and placing it in the root of your sd card and letting bootloader detect and flash the file. search for a tutorial or see the stickies.
once you've done that, make a special note about the part that says you need to boot into bootloader (hold down volume down + turn on phone + keep holding volume down until a 4-color screen appears). i suspect you are not doing this step, this is why windows, mtty, etc are unable to detect the device.
if you have already done the above, ignore my post
*sigh* too.
I've already tried flashing from the SD card but I have the same problem. I get to a green HTC loading screen and nothing else happens. I just get stuck in a reboot to MAGLDR and try again loop.
I've read through plenty of posts on flashing custom ROM's and troubleshooting but nothing has helped.
I don't get a 4 colour screen when holding down VOL-DOWN and the power button, the phone just goes into MAGLDR.
Kev
Just to add to that, Windows DOES detect the device but the RUU doesn't. Only the DAF applications find and can talk to the device.
follow me
1. is the battery have enough jiuce? what HSPL you use? hope its HSPL3 2.08HSPL
2. bootloader . . . .
Thanks for your post.
Plenty of juice in the battery.
I believe it is HSPL 2.08 (well, whichever allowed me to get Android on the thing in the first place)
Bootloader what?
Kev
getting into boot loader (4-color screen) is the key to the whole flash with sd card method.
keep trying. read on how to enter bootloader.
i can remember a few ways.
DEVICE IS ON
1. if phone is already on, hold down volume down (keep it pressed HARD)...don't let go of it!
2. push the little reset button under the battery cover. don't let go of the volume down button!
3. don't let go of the volume down button until the 4-color screen appears.
DEVICE IS OFF
1. remove the battery. reinsert it after a few seconds.
2. hold down volume down (keep it pressed HARD)...don't let go of it!
3. tap the end call button and don't let go of the volume down button until the 4-color screen appears.
remember, entering bootloader is the key.
EDIT: it is better to ensure you have sufficient battery. however, flashing via bootloader SKIPS the battery level checks.
kevinwebster83 said:
Thanks for your post.
Plenty of juice in the battery.
I believe it is HSPL 2.08 (well, whichever allowed me to get Android on the thing in the first place)
Bootloader what?
Kev
Click to expand...
Click to collapse
in post 4 you noted you tried task 29 but was successful
you are not even familiar with bootloader, ??? makes me wonder
I'm very familiar with a bootloader, your "bootloader..." comment confused me.
Task 29 was unsuccessful. I've read in a number of posts that you can use Task 29 and start from scratch back at the original bootloader (rather than MAGLDR) but this obviously isn't the case.
Holding down the VOL-DOWN key does nothing other than get me to MAGLDR, which is what happens even if I don't hold any keys down.
I fully understand that the key is entering the bootloader, nothing seems to let me get there.
Kev
kevinwebster83 said:
I'm very familiar with a bootloader, your "bootloader..." comment confused me.
Task 29 was unsuccessful. I've read in a number of posts that you can use Task 29 and start from scratch back at the original bootloader (rather than MAGLDR) but this obviously isn't the case.
Holding down the VOL-DOWN key does nothing other than get me to MAGLDR, which is what happens even if I don't hold any keys down.
I fully understand that the key is entering the bootloader, nothing seems to let me get there.
Kev
Click to expand...
Click to collapse
this is how i enter bootloader from magldr
remove battery
reinsert, leave device off
hold and continue to hold volume down
briefly press power/call button
now your in bootloader
this will show your hspl
Battery removed
VOL-DOWN held
Powered on
VOL-DOWN still held
MAGLDR appears
This isn't my bootloader and doesn't show HSPL
kevinwebster83 said:
Battery removed
VOL-DOWN held
Powered on
VOL-DOWN still held
MAGLDR appears
This isn't my bootloader and doesn't show HSPL
Click to expand...
Click to collapse
if you are now unable to enter bootloader
in this manner, there is only one thing i can think of
you got a bricked device,
you might get some help if you post your querry in the
HSPL thread, or PM cotulla and team
I'm of the same opinion; it is virtually bricked.
The stupid thing is that if I select Android Flasher from MAGLDR, I'm able to flash a different version of Android to NAND but it just won't boot.
Will try a different forum.
Thanks,
Kev
kevinwebster83 said:
I'm of the same opinion; it is virtually bricked.
The stupid thing is that if I select Android Flasher from MAGLDR, I'm able to flash a different version of Android to NAND but it just won't boot.
Will try a different forum.
Thanks,
Kev
Click to expand...
Click to collapse
i discourage you to try another forum
if you got hold of HSPL, task 29 and other stuff here in xda
then this is the best place you can be helped
try to post in HSPL thread
or PM ClydeB1, or bepe.
if they cant help you
then i highly doubt if anyone in this world will
Which HSPL thread would you recommend?
kevinwebster83 said:
Which HSPL thread would you recommend?
Click to expand...
Click to collapse
the original by bepe, cotulla and DFT
I have the same problem...does the HD2 charge itnself in Magldr ?
I purchased an HD2 off eBay to replace one with a cracked screen. The seller had been running Android and had attempted to downgrade to Winmo 6.5 (no idea why) and now the phone is stuck in bootloader. I figured it was an easy fix to get it back to running Android from NAND, but so far I'm not having any luck.
The screen shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
It looks like MAGLDR isn't functioning as I can't install CWM (USB init failed error). When I plug in the phone the "USB" message shows up and I get the sound in Windows indicating a USB connection.
I've tried a number of different flashes but all complete much too fast and upon reboot I'm still in the bootloader.
Any ideas?
Install HSPL first.
Is HSPL not installed already? It says "SPL-2.08.HSPL" on the bootloader screen.
You don't flash cwm from that screen. You flash magldr and winmo roms and radios from that screen, then when you restart magldr should appear, assuming your radio is compatible. If not, flash radio 2.15.50 and if it still doesn't start you have problems. Don't touch the spl, you are correct, 2.08.hspl is fine.
First post was SPL-2.08.JSPL, I was thinking is something wrong with SPL.
I've attempted to install MAGLDR a few times and it completes in about 30 seconds instead of the 10 minutes indicated. After rebooting I'm still looking at the bootloader.
EDIT: Just to be clear, I want to get back to Android, not Winmo
Try to flash radio like Samuel said.
I flashed to radio 2.15.50.14, which appeared to work, and still stuck in bootloader.
I have the same radio and it works.
Clean Install MAGLDR:
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. ClockworkMod Recovery
5. Flash rom
If you haven't success could be a hardware problem.
Reinstall winmo and if everything works retry an android fresh install.
This sequence appears to work up to the MAGLDR flash, which flicks straight from 0% to 100% completion. After reboot I'm in the tricolour bootloader screen (even if I hold down power button + down volume).
Just to check I'm flashing correctly, I've downloaded DFT_LEO_MAGLDR113_DAF and I unrar then run ROMUpdateUtility. Is this correct?
When the boatloader loads up, it flashes once as if trying to load something else (MAGLDR I assume) and the text at the top refreshes - don't know if this is relevant
I had a similar problem after my repair. Look into my topic to see if you have he same problem!
http://forum.xda-developers.com/showthread.php?p=20968290#post20968290
My post that will probably help you:
Roy KW said:
Stock rom is running agian.
This is what I did:
1. Put USB in Telephone.
2. Go to red/blue/green flash screen using Volume Down.
3. Flashed using official HTC Rom Updater on PC.
4. Restart Device.
I have however, been scammed.
Remember those 'touchscreen-lines' that run diagonal on your touchscreen if you watch very closely?
They are not present on my device.
This is fishy.
Review on google:
Wich is Dutch for:
Damn, really wished I've went to Vodafone. They are expensive, but at least they are honest.
Click to expand...
Click to collapse
Don't mind the scam-part. It's just part of my topic and problem.
d3ft said:
After reboot I'm in the tricolour bootloader screen (even if I hold down power button + down volume).
Click to expand...
Click to collapse
Nothing unusall there. Its the way you get into the bootloader. To get into magdlr: turn of your device then hold down POWER button (power button only) till magldr menu shows up.
Roy KW said:
I had a similar problem after my repair. Look into my topic to see if you have he same problem!
http://forum.xda-developers.com/showthread.php?p=20968290#post20968290
My post that will probably help you:
Don't mind the scam-part. It's just part of my topic and problem.
Click to expand...
Click to collapse
I'll give this a go. On boot, the phone enters the tricolour bootloader screen without me doing anything
greg17477 said:
Nothing unusall there. Its the way you get into the bootloader. To get into magdlr: turn of your device then hold down POWER button (power button only) till magldr menu shows up.
Click to expand...
Click to collapse
Tried doing this and still in bootloader!
d3ft said:
I'll give this a go. On boot, the phone enters the tricolour bootloader screen without me doing anything
Tried doing this and still in bootloader!
Click to expand...
Click to collapse
hmm that strange. seems like your volume down button is pressed or stuck constantly. did you try to clean its contacts?
greg17477 said:
hmm that strange. seems like your volume down button is pressed or stuck constantly. did you try to clean its contacts?
Click to expand...
Click to collapse
Ummm no? I wouldn't have the faintest idea how to do this
d3ft said:
Ummm no? I wouldn't have the faintest idea how to do this
Click to expand...
Click to collapse
i have never opened my hd2 that far, so i dont really know, sorry. I guess you will need a screwdriver but i would look for some tutorials on google on how to open it correctly/safely.
So the only way I should be seeing the tricolour bootloader screen is by holding the down volume button? And if I'm not it means it must be stuck?
I guess the only thing to do is pull it apart then!
d3ft said:
So the only way I should be seeing the tricolour bootloader screen is by holding the down volume button? And if I'm not it means it must be stuck?
I guess the only thing to do is pull it apart then!
Click to expand...
Click to collapse
yes, volume down to enter tricolor bootloader.
if its stuck? not sure 100%, but very very likely.
I have this same problem. Anyone find a fix for it? Or is it hardware?