[Q] Stuck at boot screen!!!! - HD2 Android Q&A, Help & Troubleshooting and Genera

I tried to flash a new ROM via CWM sdcard method, and its stuck at the boot screen and I have no idea what to do. The previous ROM i had on there was put on by a friend via the same method....
Help!!!

necrid11 said:
I tried to flash a new ROM via CWM sdcard method, and its stuck at the boot screen and I have no idea what to do. The previous ROM i had on there was put on by a friend via the same method....
Help!!!
Click to expand...
Click to collapse
You are probably stuck on boot loop.
try this:
1. wipe data/factory reset
2. wipe cache partition
3. advanced ==> wipe dalvik cache
then reinstall the rom.
you need also to be sure that you have the right CWM partition.
Try to follow the instructions of the developer
I hope this will help you

Related

Why cant I boot into Recovery?

I can reboot into Bootloader, but when I try to boot into Recovery it kicks me back into bootloader. Im using Rom Manager and Clockworks. Any suggestions? Thanks for the help.
Use amon-ra its 10 times better than clockwordmod just download this http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=PC36IMG.zip
drag it to sd card and go to into bootloader thern fastboot and it should say update
Step one, get rid of Rom Manager.
Step Two, flash Amon Ra.
Fixed....
That did it. Thanks guys. Follow up question..do I do a full wipe or Delvick- Cache wipe when flashing Roms? Im used to letting ROM Manager do everything for me that im not 100% sure.
Do a full wipe User Data/Factory reset, then wipe each sub-category, EXCEPT SD Card.
Heck, I re-wipe Cache and Dalvik Cache twice.
jrvjr said:
That did it. Thanks guys. Follow up question..do I do a full wipe or Delvick- Cache wipe when flashing Roms? Im used to letting ROM Manager do everything for me that im not 100% sure.
Click to expand...
Click to collapse
No sweat any time bro

[q] [need help!!!]

I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
horatiob said:
I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
Click to expand...
Click to collapse
My suggestion is that your read through the forums here as there are several "beginner guides" that will get you started.
After you installed your first custom rom the process proves itself to be easy:
- Flash a stock ROM (2.2 nordic)
- Acquire root using SuperOneClick
- Instal Clockworkmod recovery/2ndInit (I prefer 2ndInit)
- Transfer the nandroid backup (.zip file) to the root of your SD card
- Reboot phone when led turns blue hit volume down
-Wipe data
-Wipe cache
-Wipe Dalvik (It's under advanced)
-Restore -> select update zip from sdcard
- Browse to the nandroid backup file you put on your sdcard in step 4
Done

Stuck on "DUAL CORE" after flashing DarkSide PreFinal

Hey guys,
I've tried to flash DarkSide preFinal on my Atrix, now the phone is stuck on "Unlocked, Dual Core"-Screen.
Here's what I did:
Downloaded latest DarkSide and saved it to internal SD
Factory Reset via Recovery Console
Wipe Data
Wipe Cache
Wipe Dalvik Cache
Flashed the zip file
the process seemed to go through just fine, now when I'm trying to boot the phone it is stuck at the "Dual Core"-screen
Any ideas on how to solve this? I tried to factory-reset and wipe several times, still stuck
Any help is appreciated!
1. Do you have an unlocked bootloader?
2. Are you using a CWM-based recovery?
If you have answered yes to both 1 and 2 then:
3. Have you tried flashing the zip from the external SD?
4. Did you try to flash anything else after flashing the ROM while still in the same recovery session?
(If you answered "Yes" to #4 then re-flash the rom by itself and boot at least once before flashing anything else)
EDIT: Ignore question #1, I just realized you mentioned "Unlocked" on the boot logo.
rbf101 said:
Hey guys,
I've tried to flash DarkSide preFinal on my Atrix, now the phone is stuck on "Unlocked, Dual Core"-Screen.
Here's what I did:
Downloaded latest DarkSide and saved it to internal SD
Factory Reset via Recovery Console
Wipe Data
Wipe Cache
Wipe Dalvik Cache
Flashed the zip file
the process seemed to go through just fine, now when I'm trying to boot the phone it is stuck at the "Dual Core"-screen
Any ideas on how to solve this? I tried to factory-reset and wipe several times, still stuck
Any help is appreciated!
Click to expand...
Click to collapse
Thanks for the quick reply.
I reflashed with Wet Dream from the external SD (newer is always better, right? ).
Everything is working now
Seems like being a great ROM.
rbf101 said:
Hey guys,
I've tried to flash DarkSide preFinal on my Atrix, now the phone is stuck on "Unlocked, Dual Core"-Screen.
Here's what I did:
Downloaded latest DarkSide and saved it to internal SD
Factory Reset via Recovery Console
Wipe Data
Wipe Cache
Wipe Dalvik Cache
Flashed the zip file
the process seemed to go through just fine, now when I'm trying to boot the phone it is stuck at the "Dual Core"-screen
Any ideas on how to solve this? I tried to factory-reset and wipe several times, still stuck
Any help is appreciated!
Click to expand...
Click to collapse
how long did you let it sit at the loading screen?
Usually when I have boot loops, I let it sit on the loading screen for awhile(2-4 minutes). If it still doesnt boot, then I do a battery pull, and then usually after that it boots.
And if it doesn't boot just reboot into recovery mode, wipe cache, data and dalvik and reinstall the ROM again.
Sent From Rob's RP-Hybrid Atrix.
When installing any new rom, it can take a while to build up the dalvik cache again. I've had it take up to 10 min before. Best to just walk away and come back and check on it.

[Q] Nandroid restore fail - stuck @ Google logo

Hi all,
So I'm facing a problem with my Defy after flashing some ROMs, as detailed in this post.
Since I've made Nandroid-backups when everything was OK, my natural answer was to restore the phone to a previous state using it.
But for some reason after restoring a Nandroid (I've tried with both I have) my phone stucks with the Google logo and never finish booting...
Those are the steps I follow to restore a Nandroid:
1. Boot into Recovery Mode
2. Wipe data/factory reset
3. Wipe cache partition
4. Wipe dalvik cache
5. Restore system & data (choose nandroid by date)
6. Reboot system now
Am I doing something wrong? Why can't I restore my phone to a previous date?
Any idea is greatly appreciated...
You might have flashed gb kernel ROMS as well. Probably now you are coming from a GB kernel build to a froyo kernel build.
You need follow these steps, restore system+data, boot, devtree, and optionally recovery. Check if you have boot.img, devtree.img files in your nandroid. You should use cwm recovery which has these options to restore, they will present in Advanced restore.
Sent from my MB526 using XDA App
premaca said:
[...] You need follow these steps, restore system+data, boot, devtree, and optionally recovery. Check if you have boot.img, devtree.img files in your nandroid. You should use cwm recovery which has these options to restore, they will present in Advanced restore.
Click to expand...
Click to collapse
Thank you. I would've tried this. But yesterday night I did a full SBF so that I could restart using the phone. So I've lost access to root and CMW. Will bring those back when I have a chance and, then, ROMize it all over again...
Cheers.
fbugnon said:
Hi all,
So I'm facing a problem with my Defy after flashing some ROMs, as detailed in this post.
Since I've made Nandroid-backups when everything was OK, my natural answer was to restore the phone to a previous state using it.
But for some reason after restoring a Nandroid (I've tried with both I have) my phone stucks with the Google logo and never finish booting...
Those are the steps I follow to restore a Nandroid:
1. Boot into Recovery Mode
2. Wipe data/factory reset
3. Wipe cache partition
4. Wipe dalvik cache
5. Restore system & data (choose nandroid by date)
6. Reboot system now
Am I doing something wrong? Why can't I restore my phone to a previous date?
Any idea is greatly appreciated...
Click to expand...
Click to collapse
Try using the normal option after the restore in the boot option in bootmenu rather than 2nd-init

Help needed.. Stuck on boot loop after flashing darklord v3

i need help.. all expert, please... i try to flash darklord v3 for SM-N9005 using CMW 6.0.4.6... it stuck on the aroma installer... then i restore to my backup. now it stuck at boot loop.
1. My phone already rooted.
2. Nandroid backup on SD card.
3. downloaded darklord v3 stable version and MD5 match.
4. wipe / format all, wipe cache, wipe darlvick cache and flash darklord. Stuck at Aroma installer.
5. Reboot, do the same but still stuck at aroma installer.
6. Decided to restore back to stock lollipop. Restore from SD card.
7. Stuck at samsung logo. wipe/ format all, wipe cache, wipe darlvic cache and restart.
8. Still stuck at samsung logo. Restore again. Restore complete.
9. still stuck at samsung logo...
any idea guys????
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
i used clockwork 6.0.4.6... but i already restore to backup from SD card.. the stock rom backuped before flashing darklord. Could it be the aroma installer?? but i think the aroma installer didnt even started when i flashing darklord. It stuck at Aroma Installer V..... then nothing happen.. Bcos of this, i restore back to stock (nandroid backup).
Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
Markofree said:
Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
Click to expand...
Click to collapse
ok will try and get back to you... Thanks!!
So? How did it go?
Cheifwhat said:
So? How did it go?
Click to expand...
Click to collapse
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!
akuma238 said:
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!
Click to expand...
Click to collapse
sorry guys... i am back from work... i manage to download the stock and flash it. Now will stuck with stock first. will try to flash when finish my work. Thanks for all the help.. cheers
Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
oh..... So that is the reason I was unable to install phonesis rom. Please give me the link of TWRP 2.8 for n9005.
Update: I have downloaded and flashed it from twrp website. Thanks

Categories

Resources