I do apologize if there is a threat for this but with no good topics (many are wrong or misguided) I can't read all the threats in xda and you know it.
Specs:
Phone: Samsung Omnia II.
OSROM: GC Lite - WM6.5.3
Problem: When boot up it goes to the lockscreen with background of my friend's grandson and the slide to open button.
Sliding the button gives a pad to enter the code.
Entering the code and hitting the unlock button (open lock icon) it does nothing!
It doesn't go anywhere and after few seconds it returns to the slide button front page.
Is there a way of getting in the phone without Hard Reset so the numbers on it or anything else on the internal sd doesn't get deleted?
Thanks!
I have a similar problem. It doesn't accept my usual unlock code and I don't know why. I didn't change anything.
Did you find a solution?
Related
Hello all,
I need some advice on a locking program. Here is my problem.... I generally use the power button to "lock" my phone before I put it in my pocket. Usually that works fine until I get a reminder alert or something else that causes the phone to wake up in my pocket. At that point the touch screen becomes active and all sorts of odd things start to happen as the phone bounces around in my pocket.
I really only want to lock the touch screen, not the handware buttons so I can respond to whatever caused the phone to lock up in the first place, i.e. reminder, incoming call, etc.
I also need it to be easy to unlock the touch screen using one hand and without entering a security code.
Thanks,
Jay
I use Lockdown: http://forum.xda-developers.com/showthread.php?p=1795969
it's small and simple.
Lockdown
Looks almost like what I need except it also locks the hardware buttons. I only want to lock the touch screen.
jgreenme said:
Looks almost like what I need except it also locks the hardware buttons. I only want to lock the touch screen.
Click to expand...
Click to collapse
the closest thing I can think of for you is....
step 1.
menu » settings » personal » buttons » lock » do not lock buttons.
this will only lock the screen and not the hardware buttons (with the exception of the d-pad.)
step 2 is to set up the enable the device lock which is different than the security lock due to the fact it DOES NOT require a password to unlock the phone.
menu » settings » today » items » and check the box for "device lock".
--------------------
I tested it and it only takes 1 screen tap to lock the phone and two to unlock it.
any email or text will not unlock the phone.
if you receive a call the screen will remain locked however, you can answer the call without unlocking the screen by pressing hardware button with the green phone icon on it.
-----------
that's the best I can come up with. I hope this helps.
I bid you peace....
Check out this thread http://forum.xda-developers.com/showthread.php?t=261277
and go to this link http://www.mr2-power.com/downloads/DeviceLock.CAB
I've been using DeviceLock forever and it has always worked for me.
Hi i have installed some roms but i can't find where is the "key lock". For example the rom my green edition 6.1 has not in the desktop a key lock virtual button. What can i do? And something else. My prophet is an O2 Germany device. So every time i start the device a bootscreen with the O2 signal appears on the screen. Is it possible to change the bootlogo? And how?
Please guys tell me how to make a key lock because i put the device in a leather case and always the buttons are pressed so the device makes calls... It's problem.
device lock
Start/Settings/Personal/Today/Items and tick "device lock" with the stylus. The stylus is in the top right corner.
maniakos84 said:
Please guys tell me how to make a key lock because i put the device in a leather case and always the buttons are pressed so the device makes calls... It's problem.
Click to expand...
Click to collapse
You can either use S2U2 http://forum.xda-developers.com/showthread.php?t=381588
Or, in "Start->Settings->Today" you can put the today lock item on the today screen. Then, you just need to tap on that to lock the screen.
Ok guys thank you a lot. Your help was useful. Now does anyone know how to change the bootscreen from "O2" logo -> HTC logo or something else?
Check out this: http://forum.xda-developers.com/showthread.php?t=333194
Hi,
I have SIM unlock code and have weird issue that input box for SIM unlock does not provide any means for actually entering information. Box comes up as expected but initially keyboard is not shown. So basically empty screen with just input field. I have to click Windows button and go to settings to bring keyboard icon available on titlebar and even that one looks weird (you can see it in video below) left and right parts are white out.
After I enter my code into input field I press Enter button and nothing happens.
Any ideas?
http://www.youtube.com/watch?v=2Fpsx8IUCcQ
BTW if interested how did I record video. This is really cool Free app called MyMobiler.
Hi guys. I've been trying to search for this problems i've encountered on my X2 and i simply can't find any answers for it.
I have few minor problems which i want to ask.
1. My device keeps on charging even if the led image says that it's already 100%. I only assumed it is still charging because it is well written on its Status right above the led image.
Is this normal, and is there a way to fix this if ever? I'm worried that my battery gets overcharged if i wont to anything about this.
2. Sometimes my camera button fails to work. It happened several times now that when i try to activate the camera using its button on the right side the camera doesn't appear right away. Another thing, sometimes when i'm trying to take pictures and i pressed the camera button, the camera will just pause for a while and then green square boxes will appear on the screen. No image will be taken. Is that normal? or my camera is having problems?
3. I also noticed that the contacts are filtered by to view all contents (sim and device contacts) by default. I set mine to filter it to be able to just view the device contacts but whenever i open the contacts it reverts back to its default filtering which is "All Contacts". It is very useful at least for me to use the device as the contact's handler because my sim has limited memory and is divided into 2 parts. The first part is the one that appears and the other one can only be viewed if you disable the first part and make the 2nd part available by using the sim services embedded with it. So what i did was i copied all the 1st part and the 2nd part sim contents to my device and i was planning to hide them and use the phone's memory as the handler for contacts.
It was then that i realized the filtering problem. RIght now all copied contacts from my sim appears as well as the other part of the sim which is enabled. Which makes a lot of duplicated contacts (one from the device and one from the sim).
Is there away to make the phone permanently filtered in the device contacts?
4. I saw some of you guys teaching some members here to edit the phone's registry. Can i request for a 3rd party software to do that. Or can i just go directly to the mobile's registry and edit one of it (I don't know to do that by the way :-I )
5. Lastly, is there any way to activate the screen in order for me to unlock it? when the phone is locked and in stand by mode i can't seem to find any buttons to activate it. I am unable unlock the phone because the slide unlock button is not appearing.
What i'm doing to activate the slide unlock button is to press the power button or to slide the qwerty keyboard. I was hoping there are other ways to do it though just like on old phone wherein you can press the menu button and the asterisk key .
One last thing to end my post, please give me a Total Commander link too.
All replies would be very much appreciated sir/ma'am
To the moderators, please lock this thread if ever i violated rules. I just can't seem to locate any answers for my queries that's why i decided to created a thread with all my questions in it.
Thanks in advance.
its too early but ill try to answer some
1. same problem dunno if it hurts
2.never had problems with camera except sometimes failed (needed reboot) to start but i think people found out they had not enough memory - if im not mistaken
3.no clue
4.
use http://www.ghisler.com/pocketpc.htm
5.
nope the power button is ment for itit turns the screen on/off and has some other options aswell
indycar said:
its too early but ill try to answer some
1. same problem dunno if it hurts
2.never had problems with camera except sometimes failed (needed reboot) to start but i think people found out they had not enough memory - if im not mistaken
3.no clue
4.
use http://www.ghisler.com/pocketpc.htm
5.
nope the power button is ment for itit turns the screen on/off and has some other options aswell
Click to expand...
Click to collapse
Thanks for the reply.
Hmmmmm, regarding my query on the contacts filtering, i'm sure there is a registry tweak to for that. I was trying to look for it last night but i wasn't able to locate it.
Perhaps there are geniuses here that can do that for us.
Registry Editing to make the contacts filtered on "device contacts" by default. The default by the way is filtered as "All Contacts"
This has happened twice today. I am using the phone and the voice typing display will not go away. I can use the phone.. .i can go to the homescreen, open apps, look at settings, etc, but i cannot close the voice prompt, and i can't use it.
It essesentially makes the phone useless until i reboot.
I am not sure why it is doing this. Not rooted nor unlocked or anything.. just stock.
The other thing it is doing is that sometimes when i wave my hand over the screen i will see the unlock screen. it will have the time and a lock icon below it ... if i touch the lock icon, it moves to a lower (on the screen) position and when i re adjust to hit the lock again it moves back up. Not sure how to screen shot this... maybe a video from a different phone.
when this happens, it will unlock by pressing the power button. I think this has something to do with the smart lock. DAMN google for forcing you to have a lock when you use Android Pay. Never had this problem on my Note 4 with Wallet.
Anyway, any help on either of these bugs would be appreciated
ok, i can reproduce the bug.
can someone else try this to confirm?
- with the phone screen off have someone send you a text message.
- swipe up directly to messages. ( use the google one, but i am not sure if it matters.)
- reply to the message with a google voice typing
- hit the power button to turn off the screen.
- Have the person text you again.
- open message by swiping up to it.
At this point the tap to speak screen will be there and not go away until you reboot.
no one else?
here is a video showing the problem I can't believe I am the only one experiencing this
https://dl.dropboxusercontent.com/u/11731783/20150929_123443.mp4
crash613 said:
no one else?
here is a video showing the problem I can't believe I am the only one experiencing this
https://dl.dropboxusercontent.com/u/11731783/20150929_123443.mp4
Click to expand...
Click to collapse
I can try it when I get my phone, but that's a few weeks away...