Not New to Android, New to Atrix - Atrix 4G General

I've had an Evo for about 9 months....but....
Work basically just gave me an Atrix and laptop dock to mess with, and even encouraged the "development" side of it (aka root it, without saying root it)
I've done a bit of research, and I have a few questions.
Right away I used the "One Click Root" at the top of this forum.
What I want to know is how to enter Clockword Mod Recovory, which I can on the Evo to backup my phone and flash a rom stored on the SD card.
It doesn't seem to have it unlocked that menu though, as I can't access it by holding those buttons down.
That would make my life alot better, as I can start to experiment for the Roms for this phone (currently running Mik2.3? on the Evo, didn't see a ROM for this phone though )
Anyway, thanks for helping out....I'm excited to learn this phone.
Also, the dock is rather new, any cool tricks I could exploit?

(Have you unlocked the bootloader..?)
Flash romracer's recovery, check in the development forum. Or download Rom Manager and install the recovery from there.

Vangelis13 said:
(Have you unlocked the bootloader..?)
Flash romracer's recovery, check in the development forum. Or download Rom Manager and install the recovery from there.
Click to expand...
Click to collapse
Not really sure how to flash in img file.
I really don't remember doing that on the EVO....I can only really do things once I boot into recovery, which I can't seem to figure out on this Phone

Check the noob guide at the top here, all answers are there. First step is to unlock the bootloader.

Vangelis13 said:
Check the noob guide at the top here, all answers are there. First step is to unlock the bootloader.
Click to expand...
Click to collapse
Got it unlocked...
Anyway, what exactly is Deodex? not sure I see that with the Evo...
Also, whats the hotness in roms....can i simply place in a directery and flash like i can with evo and recovery screen?
Well I thought I flashed CWM but it just shows up a android guy with an !
??

drs6222 said:
Got it unlocked...
Anyway, what exactly is Deodex? not sure I see that with the Evo...
Also, whats the hotness in roms....can i simply place in a directery and flash like i can with evo and recovery screen?
Well I thought I flashed CWM but it just shows up a android guy with an !
??
Click to expand...
Click to collapse
when u first turn on the atrix does it say unlocked in the top left corner if it does download and install ether cwm or rom manager drom market and install the cwm from it then install romracers latest revovery from the dev forums
Sent from my MB860 using xda premium

Romracer said:
The system runs /system/etc/install-recovery.sh on boot with the stock rom. On boot it checks the recovery partition for some update and with CWM installed decides to reflash the stock recovery over it. Rename or delete the file and the CWM should stick.
Click to expand...
Click to collapse
after you delete install-recovery.sh you can flash a recovery and have it stick past reboot.

Alcapone263 said:
after you delete install-recovery.sh you can flash a recovery and have it stick past reboot.
Click to expand...
Click to collapse
He shouldn't have to do that. If it's rooted and has an unlocked bootloader he should just be able to download either rom manager from the market and install the recovery that way or he could flash romracer's recovery via fastboot. That's all I really did when I went through this and it worked just fine for me.
On another note, to the thread poster, definitely read the "stuck" threads at the top of each forum and you'll be able to figure everything out without having to ask questions that are already answered. I went through it all and have gotten to the point where I can do a lot of this stuff on my own so I highly recommend doing so.
Sent from my MB860 using xda premium

GeNiO426 said:
He shouldn't have to do that. If it's rooted and has an unlocked bootloader he should just be able to download either rom manager from the market and install the recovery that way or he could flash romracer's recovery via fastboot. That's all I really did when I went through this and it worked just fine for me.
On another note, to the thread poster, definitely read the "stuck" threads at the top of each forum and you'll be able to figure everything out without having to ask questions that are already answered. I went through it all and have gotten to the point where I can do a lot of this stuff on my own so I highly recommend doing so.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
rooted and unlocked bootloader doesn't matter, if he's on the stock ROM and has that file it runs on boot every time. you can install recovery, but it just won't stick since install-recovery.sh runs at boot every time the file is present.

Related

[1 Click Root] I Have Two Questions...

Ok, i just heard of the one click root app now out for the nexus one.. I always wanted to root, but every time I did, i was never able to get it. So anyways back to my questions...
*[1] I have stock froyo frf91.. I manually updated all the versions leading up to frf91 not once did I receive an ota update... Once I root, will that cancel my ota's? (even tho I manually update them) will I still get an ota update to gingerbread if I root?
*[2] Once I do this root thing, i want the best rom that includes a fast, clean, eye candy, all black theme. (Including the notification bar) after I find this, how do I go about and apply it? How do I install it?.. Isn't there an app in the market where I can look at the newest roms and themes and just apply them from there?
Sorry for the noob questions guys, i just want to witness what all of you have.. I want to unleash the potential of my nexus one! Lol.
** On a side note, i also heard that once you get a cyanogen rom, it is a must that you download the titanium back up app.. is that right?.. because that rom deletes everything...?
Thanks guys, very much!
Sent from my Nexus One using XDA App
Never heard bout the Backup thing issue,
But No, once rooted you dont get OTA's (due the fact you change recovery image and rom)
I believe if you still keep things stock like Recovery, and Official ROM you do! (but unsure of this)
Also there is a adb way to root which is simple and thats how i rooted my phone!
you can give that a try instead of one click!
there are no roms in market..
Also try to look through the Dev section, to even apple Dev roms you need to flash custom recovery then do a nandroid back up, then from ther you use the apple from sd!
http://forum.xda-developers.com/showthread.php?t=736271
this is the method i followed
-note if this is gonna be your first time rooting, i suggest you read all info possible bout it, then read it again.. the think on how your going to do it , then reread the info then apply.. while applying stil read the info
woah there. He'll still get the OTA notification and can even download it. You just can't apply the OTA updates. You have to use a rooted one, generally available here before you'll ever even see the OTA notification on your phone.
if you are rooting for the first time do it the loop adb way. Its a bit more involved but once you do it you will learn a bit about adb and other methods that you will need in the future.
One-Click root is going to make the more fun parts of modding harder in the future. The guide in the stickies is very easy to follow and it will pay off in the long run.
Or fastboot oem unlock it and have the badge of honor
That's the thing, i've tried doin it the adb way.. it just never worked for me..
And I also don't want to unlock the bootloader
Sent from my Nexus One using XDA App
this way should work like perfect, the other way with pulling sdard way seems kinda over that top for me..
Yea.. so if I use this one click method, i can use custom roms and themes?
Sent from my Nexus One using XDA App
matholomus said:
Yea.. so if I use this one click method, i can use custom roms and themes?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yup, I did that yesturday, there are a few more steps after rooting to get custom roms to work but you can do it.
On another note, cant you just flash back to stock, then using rom manager get rid of the custom recovery, then unroot using the 1click root? Wont that put you back to stock? cant you use the ota's then?
The AndRoot app is awesome. U can turn root ON or OFF anytime (even for ota).
Orangeandblue302 said:
Or fastboot oem unlock it and have the badge of honor
Click to expand...
Click to collapse
and wear it proudly! fastboot is a cinch and pretty hard to ef up. the worst part is the syntax (especially if you dont have the recovery image in the right directory). i found this link to be helpful in learning how to use fastboot.
i used fastboot to unlock and to flash amon ra. then, running amon ra, i flashed whatever ROM i wanted. later, just for s and giggles i used rom manager to install the clockwork mod recovery.
if you dont like the outcome, you can always flash back to stock which will redo the stock recovery too... but the unlock badge will remain proudly displayed.

How to Flash Clockworkmod Recovery 3.0 easily from your phone

I found a really easy way to flash the new recovery. My fastboot didnt seem to have an option for a terminal so I thought of this genius yet n00b way. Here are the steps.
Steps:
1. Install clockworkmod from market.
2. Flash Clockworkmod recovery from Rom Manager.
3. Navigate to clockworkmod/download/koush.tandtgaming.com/recoveries (or where ever your recovery was downloaded to. This can be done in File Manager, Astro, or Androzip.
4. Mine was "recovery-clockwork-2.5.1.3-vision.img". Rename it to "recovery-clockwork-2.5.1.3-visionXXX.img" or something obviously different.
5. Download clockworkmod 3.0 from hereish:
http://forum.xda-developers.com/showthread.php?t=893933
6. Move your recovery.img to clockworkmod/download/koush.tandtgaming.com/recoveries and name it recovery-clockwork-2.5.1.3-vision.img
7. Go into ROM Manager and Flash Clockworkmod recovery, it will say its still 2.5.1.3 when your done. Reboot into recovery and you'll be welcomed by a new orange 3.0
More than likely i could have done it much easier but it just kinda clicked and i didn't wanna bother with fastboot as it feels clunky on the G2.
there's nothing noob about it. that is a bonafide hack. nice!
I tried something like that but I didnt rename it correctly. So nice to know though. Good work.
Sent from my T-Mobile G2 using XDA App
Can u put that in a zip for lazy people like me
Sent from my T-Mobile G2 using XDA App
charlieton said:
there's nothing noob about it. that is a bonafide hack. nice!
Click to expand...
Click to collapse
How is that a hack? LOL
not really a "hack" per se but it tricks ROM manager into flashing a newer clockwork while still thinking it is the same old one. i thought about doing this the other day but never got around to it so great job on this
wineguy13 said:
Can u put that in a zip for lazy people like me
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
You need this is a zip to simply move a file to your SD card? Wow, that IS lazy. lol
I followed the thread but the download take u to a bunch of jumbled code.. is that right?
Sent from my T-Mobile G2 using XDA App
Typo
shadymnms said:
4. Mine was "recovery-cockwork-2.5.1.3-vision.img". Rename it to "recovery-cockwork-2.5.1.3-visionXXX.img" or something obviously different.
Click to expand...
Click to collapse
Nicely done, flashed it via your method.
You may want to correct the typo you have in there as I first tried to copy and paste your file names. It's clockwork, not cockwork.
shadymnms said:
More than likely i could have done it much easier but it just kinda clicked and i didn't wanna bother with fastboot as it feels clunky on the G2.
Click to expand...
Click to collapse
How does it feel clunky? fastboot flash recovery recovery.img is a lot easier than this method.
rp1783 said:
How does it feel clunky? fastboot flash recovery recovery.img is a lot easier than this method.
Click to expand...
Click to collapse
For some reason flashing recovery from fastboot hangs everytime on my phone. This way is good but I did it in terminal. I actually had to flash a cyanogen rom to get the fastboot command, this method would have saved that step.
Sent from my HTC Vision using XDA App
overpower said:
Nicely done, flashed it via your method.
You may want to correct the typo you have in there as I first tried to copy and paste your file names. It's clockwork, not cockwork.
Click to expand...
Click to collapse
Fixed. Thanks lol. I was doing in between flashing villian and was going back and forth. Ahhh... "cockwork", really? Musta slept in too late too.
Sent from my HTC Vision using XDA App
And the downgrade?
fastboot is a lot easier than this IMHO !
You will have fastboot if you have got adb setup on your PC. See the adb guide in this forum for how to setup adb (and fastboot too). It's worth going to the effort, because fastboot will help you with various things in the future. Also you will need the eng hboot.
thank you so much! man now this i can do. i was trying to adb or find terminal in my fastboot.
I'm just starting to install custom ROM tho my DZ, but is this means that ROM Manager will never integrate the new Clockworkmod Recovery?
shadymnms said:
I found a really easy way to flash the new recovery. My fastboot didnt seem to have an option for a terminal so I thought of this genius yet n00b way. Here are the steps.
Steps:
1. Install clockworkmod from market.
2. Flash Clockworkmod recovery from Rom Manager.
3. Navigate to clockworkmod/download/koush.tandtgaming.com/recoveries (or where ever your recovery was downloaded to. This can be done in File Manager, Astro, or Androzip.
4. Mine was "recovery-clockwork-2.5.1.3-vision.img". Rename it to "recovery-clockwork-2.5.1.3-visionXXX.img" or something obviously different.
5. Download clockworkmod 3.0 from hereish:
http://forum.xda-developers.com/showthread.php?t=893933
6. Move your recovery.img to clockworkmod/download/koush.tandtgaming.com/recoveries and name it recovery-clockwork-2.5.1.3-vision.img
7. Go into ROM Manager and Flash Clockworkmod recovery, it will say its still 2.5.1.3 when your done. Reboot into recovery and you'll be welcomed by a new orange 3.0
More than likely i could have done it much easier but it just kinda clicked and i didn't wanna bother with fastboot as it feels clunky on the G2.
Click to expand...
Click to collapse
Thank you kind sir.
Thanks for this simple guide! Before I move forward though, a couple of questions - I need this recovery to flash gingervillain or the CM7 that's being worked on, right? But if I want to revert back to my nandroid backup of cm6.1.1, will I have to flash the old recovery before doing so? Cheers
Sent from my HTC Vision using XDA App
steviewevie said:
fastboot is a lot easier than this IMHO !
You will have fastboot if you have got adb setup on your PC. See the adb guide in this forum for how to setup adb (and fastboot too). It's worth going to the effort, because fastboot will help you with various things in the future. Also you will need the eng hboot.
Click to expand...
Click to collapse
now cmon stevie, i agree its good to have adb and proper sdk w\ drivers installed. But for the super ober noob thats wants shiny pretty new cw3 for whatever reason be it cm7 or just because, even trying to teach the super ober how to cmd and cd to the sdk is a larger challenge than this. Im just saying your a well respected source of info on xda to a lot of super obers and to say this is easier on the big picture, well thats just crazy talk. This is pretty easy for just about anyone.
kalipedia said:
Thanks for this simple guide! Before I move forward though, a couple of questions - I need this recovery to flash gingervillain or the CM7 that's being worked on, right? But if I want to revert back to my nandroid backup of cm6.1.1, will I have to flash the old recovery before doing so? Cheers
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
from what i've read this seems to be the case. i think i'll wait for a stable cm7 release before updating to 3.0

semi brick, been awake 27 hours trying to fix please help...i searched extensively

ok heres the situation, i tried to root my wifes mytouch 4g...i have rooted before, so i figured hey wtf lets give it a go, i got clock work 3.0.0.5 installed fine, but i cant get a restore to work or anything form there...i can do clock work and hboot/fastboot...nothing else...cyanogen just causes splash screen free...and so does anything else i flash...now i downloaded pd15img.zip and attempted to use that...but it just fills the blue bar in hboot and says checking pd15img.zip then goes back to hboot main screen i am never asked to load the zip with volume...please ladies and gents i know im not completely done here...and if i am i will get a replacement, but it seems like it should be an easy fix...what am i doing wrong...if i try to reflash recoveries in fastsboot i get signature verify error
http://forum.xda-developers.com/showthread.php?t=944681
this happened to me as well. i went to ice glacier and then followed the instructions on the link
You cannot use 3.0.0.5 for stock. You must flash an older recovery or 3.0.0.6 and then it will work. This is covered extensively and has been asked over and over again.
Flash the correct recovery for the rom you want to use and your problem will be solved.
Sent from my HTC Glacier using XDA App
i tried...
i have loaded other roms...i cant get a single one to make it past the splash screen...i cant flash another recovery from fastboot...i am baffled, you would think if i have fastboot...hboot...and clockwork it owuld be an EASY fix...anyone point me a lil further in the right direction, i dont mean to be dense i been up for a LONG time trying to figure this out, now im at work...slow day...and if i can fix this before i get home my wife will be SO HAPPY..so which version of ice glacier i just tried 1.1
?
Just flash 3.0. 6 and flash the rom you like, you should be good to go, you can set up web to flash the recovery... hope it goes smoothly =)
Sent from my HTC Glacier using XDA App
Also sometimes it takes a while to boot, how long do you give it?
Sent from my HTC Glacier using XDA App
i can set up what to flash the recovery? i cant flash through fastboot i get a signiture error, no matter WHAT recovery i use...old...new....05...doesnt matter and im at 05 right now...i know i need 6...i think that owuld fix me to...but i have NOT A CLUE how to obtain a new recovery without being able to move past the splash screen...i can boot into hboot...fastboot...and clockwork...nothing else.
like 20-30-40mins at a time, and it just stays on the splash
If the computer recognizes your device in pretty sure you can set up adb. Thanks flash recovery through there, you should have been able to flash Glacier, you must be doing something wrong, try flashing and stock zip through recover maybe?
Sent from my HTC Glacier using XDA App
how can i use the adb outside of android? i must have missed something , i typed adb devices while my device was in recovery it found it and said recovery next to it...what are the commands to issue a flash recovery? flash_image recovery /sdcard/recovery.img ? and where do i enter them? with my device in the recovery? or fastboot? hboot? sorry guys, im burining it too hard at both ends...my brains toast...im open to any thing you got
atrocityg1 said:
how can i use the adb outside of android? i must have missed something , i typed adb devices while my device was in recovery it found it and said recovery next to it...what are the commands to issue a flash recovery? flash_image recovery /sdcard/recovery.img ? and where do i enter them? with my device in the recovery? or fastboot? hboot? sorry guys, im burining it too hard at both ends...my brains toast...im open to any thing you got
Click to expand...
Click to collapse
lol you're thinking at light speed bro...
i'm not exactly sure of the commands but i know if you've got adb set up you should be able to do it. maybe adb shell?? i have no idea as i'm not a developer.
i'm confused why you couldn't get royal glacier flashed, it shouldn't matter which recovery you have with 2.2 roms. sounds like your phone just doesn't want to comply...
forgive me... as this is much a partial question as it is a suggestion... (coming from WinMo to Android myself) but can't Clockwork Mod be updated FROM Clockworkmod recovery??
I seem to recall that update.zip is the install for the clockworkmod install... and there's an option within clockwork to install update.zip... isn't that correct?
If so... wouldn't you just download the .zip for 3.0.0.6, copy it to the microSD and install it, then install the ROM of choice?
Ryan79 said:
forgive me... as this is much a partial question as it is a suggestion... (coming from WinMo to Android myself) but can't Clockwork Mod be updated FROM Clockworkmod recovery??
I seem to recall that update.zip is the install for the clockworkmod install... and there's an option within clockwork to install update.zip... isn't that correct?
If so... wouldn't you just download the .zip for 3.0.0.6, copy it to the microSD and install it, then install the ROM of choice?
Click to expand...
Click to collapse
recoveries have to unfortunately be flashed through script.. =/
gonna try that thanks aalsmadi1 and ryan79...illl post results...anyone got a 3.0.06 zip?
well im still in the same boat...not a clue how to make this flash work...the flashboot recovery command only tells me signiture verify failed...with 4 diff recoveries...somin is up
atrocityg1 said:
well im still in the same boat...not a clue how to make this flash work...the flashboot recovery command only tells me signiture verify failed...with 4 diff recoveries...somin is up
Click to expand...
Click to collapse
Edit: my bad, that won't work. There are other threads that will help tho. It's sticky in the q&a section
You have to have the eng spl for that to work.
Sent from my HTC Glacier using XDA Premium App
edit: ignore my post
woldy2 said:
in recovery...is signature verification on...its in install zip from sdcard...toggle toggle signature verification...select that...you want it to say disabled...i hit that on accident before...screwed me up for a couple days...it wont let you flash anything with that enabled.
Click to expand...
Click to collapse
Don't listen to him, your talking about something different
Sent from my HTC Glacier using XDA Premium App
well no matter now, i called tmobile and told them i was using the device and it died and now freezes at splash after fresh charge...shame i cant full on brick it so they cant see clockwork if they look...anyone that can help with that will be apprciated...ehh what am i saying XDA YOU ARE APPRECIATED
...... edit

Rooting a 4g

OK so I'm commingle from the epic and I want to root for titanium but I've seen there is different varrent and different ways to root what meatod will work and I have looked and searched before I get the plaza use search I just don't want to brick using wrong root meathod thank you in advance for who ever is willing to help
Sent from my Nexus S 4G using XDA App
+1
Sent from my Nexus S 4G using XDA App
Do you have SDK and working fastboot? That is step one.
Yep
Sent from my Nexus S 4G using XDA App
*note* i did not develop this method entirely i scrapped it together from multiple posts found here on xda. I give credit to those who did the work first. it worked fine for me hopefully it works for you too.
download sdk tools and install
download fastboot drivers and install
both found here
after that, download clockwork recovery
also download superuser files you want eclair/froyo su it works for gingerbread too.
open command prompt and enter the following
Code:
fastboot devices
if it doesn't return your phone in the following line double check that your fastboot drivers are properly installed.
if it does enter the following
Code:
fastboot oem unlock
follow the onscreen prompt on your phone. volume up to "yes" and hit power to confirm
Your phone is now unlocked. next step installing a recovery.
navigate to the folder where the clockwork recovery image is located.
Code:
cd C:\users\#username#\downloads
or wherever the file is on your pc.
then enter the following
Code:
fastboot flash recovery recovery-clockwork-3.0.2.4-crespo.img
you now have a proper recovery installed on your phone you may now vol dn to recovery and hit power to confirm
VERY IMPORTANT
in recovery vol dn to "backup and restore" power to confirm
select Backup and hit power again.
you just created a nandroid backup of your phone if you ever mess it up you can restore it back to when it was stock and problem free
In recovery vol dn to "mounts and storage" power to confirm
then choose "Mount USB storage"
copy the SU zip to the root of your phone's storage
then "Unmount"
then "+++++Go Back+++++"
then "install zip from sdcard"
then "choose zip from sdcard"
Choose su-2.3.6.1-ef-signed.zip
then select "Yes - Install su-2.3.6.1-ef-signed.zip"
Reboot your phone and you should now have a stock rooted phone.
Ty Joe I will do this as soon as I get home
Sent from my Nexus S 4G using XDA App
tildog said:
No I have not but did not want to start on anything till I confirmed that the method will not brick I will dl. Sdk. And drivers tonight at work ATM
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
It's really *really* hard (if not damn near impossible) to actually brick a nexus-s. Just so ya know ;D
netarchy said:
It's really *really* hard (if not damn near impossible) to actually brick a nexus-s. Just so ya know ;D
Click to expand...
Click to collapse
That is good to know I had a few scares on my epic I know how to do stuff but on the epic was always a onclick meathod so this looks a little overwhelming in comparison but easyenof otherwise
Sent from my Nexus S 4G using XDA App
tildog said:
That is good to know I had a few scares on my epic I know how to do stuff but on the epic was always a onclick meathod so this looks a little overwhelming in comparison but easyenof otherwise
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Just remember to make a nandroid backup in clockwork after you're done rooting, so you always have a working setup to fall back on if something should go wrong in the future
tildog said:
That is good to know I had a few scares on my epic I know how to do stuff but on the epic was always a onclick meathod so this looks a little overwhelming in comparison but easyenof otherwise
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
i just came from the evo and rooted that phone way before any one click roots where out. Trust me the nexus s is 100 times easier to root than any other phone it's actually pretty quick and easy, i just went into great detail so anyone could be able to follow it hopefully. I think i have seen some 1 click roots for the ns but i never looked into them once i saw how relatively pain free it is to do this way.
i remember having to copy and paste adb commands and spamming them while my phone rebooted. and hopefully... hopefully it would unlock the evo.
just out of curiousity as i wont know until tomorrow, but does gingerbreak work? if so just using the sdk and using adb to push it seems like it would be faster..
shabbypenguin said:
just out of curiousity as i wont know until tomorrow, but does gingerbreak work? if so just using the sdk and using adb to push it seems like it would be faster..
Click to expand...
Click to collapse
Yes there has been success using that. You could i suppose gain root with gingerbreak and then use that to flash clockwork recovery. You would be rooted and able to flash Roms through clockwork. Bootloader would remain locked.
Thanks all. I'll try this later tonight and report back. I've seen a few root methods around here but wanted to make sure it was no different for the ns4g before I actually got into it.
So to confirm one more time Joe's method he posted here should work for the ns4g as well, right?
Sent from my Nexus S 4G using XDA App
matt2053 said:
Yes there has been success using that. You could i suppose gain root with gingerbreak and then use that to flash clockwork recovery. You would be rooted and able to flash Roms through clockwork. Bootloader would remain locked.
Click to expand...
Click to collapse
Yea but its a quick and easy way to root. Until there is more support for the ns4g no real reason to unlock
shabbypenguin said:
Yea but its a quick and easy way to root. Until there is more support for the ns4g no real reason to unlock
Click to expand...
Click to collapse
Yeah for sure, I'm not saying its good or bad. Just pointing out the difference in that method. Some people prefer to keep the bootloader locked anyway. Unlocking it is always one command line away.
Sent from my Nexus S using XDA App
shabbypenguin said:
Yea but its a quick and easy way to root. Until there is more support for the ns4g no real reason to unlock
Click to expand...
Click to collapse
Not totally sure regarding roms, but my latest kernel builds *should* be compatible ;D
(Disclaimer: always nandroid before flashing customs!!)
netarchy said:
Not totally sure regarding roms, but my latest kernel builds *should* be compatible ;D
(Disclaimer: always nandroid before flashing customs!!)
Click to expand...
Click to collapse
cool thanks for the support man
Running into an issue on ns4g. I can unlock and install Clockwork 3.0.0.5 but when I try to Nand backup it says it can't find cache. I've tried to manually mount it but won't do it there either. Any suggestions?
oubravs2b said:
Running into an issue on ns4g. I can unlock and install Clockwork 3.0.0.5 but when I try to Nand backup it says it can't find cache. I've tried to manually mount it but won't do it there either. Any suggestions?
Click to expand...
Click to collapse
Install clockwork 3.0.2.4
Make sure you've renamed the /system/etc/install-recovery.sh script (if you haven't already) as well so clockwork isn't overwritten by the stock recovery.
netarchy said:
Install clockwork 3.0.2.4
Make sure you've renamed the /system/etc/install-recovery.sh script (if you haven't already) as well so clockwork isn't overwritten by the stock recovery.
Click to expand...
Click to collapse
Good to go I think - thanks netarchy!
So for you all that are trying to follow joe's steps, they are correct except the download linked in his post will give you the 3.0.0.4 version of Clockwork and you need the one referenced by netarchy (3.0.2.4). All worked as planned after that.
Rooted and ready to flash netarchy's kernel on ns4g!

[Q] nexus s just shows google logo after rebooting

So i tried to root my phone using one of the tutorials and ended up with a padlock screen on my phone. after researching i ALOT i decided on hard reseting my phone from the recovery menu. but all i see now is the google logo i believe i have deleted the 2.3.4 while reseting. can someone guide me from here. i am a n00b and i have had this phone for just 2 days. thanks in advance
anyone who can help?
youngballer said:
anyone who can help?
Click to expand...
Click to collapse
Please be more specific.
What tutorial did you use?
Did you download clockwork recovery?
Do you have the superuser zip?
If you can enable fast boot and fastboot flash recovery you should be able to mount your usb storage in CWM and then install a ROM and the su zip.
stuck on the nexus s boot screen
Babydoll25 said:
Please be more specific.
What tutorial did you use?
Did you download clockwork recovery?
Do you have the superuser zip?
If you can enable fast boot and fastboot flash recovery you should be able to mount your usb storage in CWM and then install a ROM and the su zip.
Click to expand...
Click to collapse
i used the one mentioned in addictive tips website (http://www.addictivetips.com/mobile/how-to-root-nexus-s-with-a-single-click-using-superboot/). i basically followed what these guys had mentioned.
since this failed i read that the other option is to go through fastboot > recovery > and clear everything but this did not change anything.
can someone give me a step by step guideline on how to continue. i dont mind going back to the stock 2.3.4 android. i just bought the phone yesterday
Which version do you have? The sprint or t mobile? Check if you can go into fast boot hold down volume up and then powerbutton. If not you may have to Odin it if not. That super one click looks old..
Sent from my Nexus S 4G using XDA App
chewbz said:
Which version do you have? The sprint or t mobile? Check if you can go into fast boot hold down volume up and then powerbutton. If not you may have to Odin it if not. That super one click looks old..
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I am in Canada but the model is 19020 A. I can get to the fastboot mode but don't know what to do after that.
I have the 4g so I don't want to give you the wrong information and never encountered this situation so sorry dude. Hopefully a more experanced user can help you out.
Sent from my Nexus S 4G using XDA App
Btw if all fails you can Odin it
Sent from my Nexus S 4G using XDA App
its all good thanks for trying to help
If your ROM flashed incorrectly, it would lead to your phone being in a state where it just shows a GOOGLE with a Padlock; kind of like turning on a computer without an operating system.
You would have to read the instructions on rooting your phone, which involves using fastboot and flash recovery from fastboot (All this is in the rooting guide). Simply reflash the recovery so you boot up back in recovery and try flash the rom again.
The same happened to me, I fixed it buy flashing a stock boot.img
Sent from my Nexus S using XDA App
thanks for the replies. how do i flash from the fastboot mode? when i plug it in to my computer i cant see the drive but my computer can detect the nexus s is plugged in
Set up adb first, they have the guides in the dev section, I used wolverines guide, you'll have to look for the software img, I don't know where it is at for the GSM model. Good luck
Sent from my Nexus S 4G using XDA App
Sounds like you're rooted and have recovery installed, but your OS is hosed.
Flash a ROM.
thanks for the replies guys. i have the adb setup on my laptop. i took it to one of the stores and he said he cant reflash it for some reason. he said he needs to get some software off samsung and it will take him a day. my phone is brand new and i didnt wanna trust him. do u guys think i should use odin? one of my friend has a galaxy s and he said odin should work fine on my phone.
Can you get into the ClockworkMod recovery menu? Turn the phone completely off then hold VolUp and Power until you get into Recovery.
If you get there, you're golden. Just download a ROM (I recommend Deck's) and away you go.
i can get into recovery but it gives me option like wipe everything and i selected that. but when i reboot the phone the same locked screen pops up. anyone from toronto here who i can contact?
youngballer said:
i can get into recovery but it gives me option like wipe everything and i selected that. but when i reboot the phone the same locked screen pops up. anyone from toronto here who i can contact?
Click to expand...
Click to collapse
Basically with those wipe commands you make the Rom unuseable. You have to flash a new one or apply it via Odin. There are various guides on this forum section. Odin requires less technical knowledge but is a bit more risky then flashing via recovery. Odin and the Roms for that method can be obtained from samfirmware.com. Zipped roms can be found in the development section here.
Sent from my Nexus S

Categories

Resources