So it happened again. Fully charge the TF for a trip. When I get to my distination (8hrs later) turn on the TF and its dead. No power and no chargers. This thing is pissing me off!
Anyone know why or how I can fix? I do have the wifi off when screen is off.
How is that possible?
Did you not shut down your TF?
hipertec said:
So it happened again. Fully charge the TF for a trip. When I get to my distination (8hrs later) turn on the TF and its dead. No power and no chargers. This thing is pissing me off!
Anyone know why or how I can fix? I do have the wifi off when screen is off.
Click to expand...
Click to collapse
It looks like you are having the reboot during deep sleep issue that started with the upgrade to ICS. The reboots can be stuck with the screen enabled and the processor actively trying to complete the boot, which drains your battery.
Short term, I would avoid leaving the TF powered up unattended for long periods.
That will prevent the total battery drain. For a longer term work around, you can try an app called Wake Lock, which you can set to prevent the TF from going into deep sleep, and eliminate the deep sleep reboots, which has helped some users, including me.
The app should be set to restart on Reboot, and select the Partial Lock, then select the Acquire Lock setting, on the red bar, which will switch to green, and indicate that it has acquired. You can also set it to show its icon in the Notification are, so that you have a visual assurance that it is working. Then just exit the app, and it will work in the background.
You can monitor that it is preventing Deep Sleep, using the CPUspy app.
I would then watch carefully to see that you aren't experiencing any more reboots during Deep Sleep.
Long term, ASUS is researching instability with ICS, and we hope to get a true fix. Until then, use of Wake Lock may help you.
Others may have other opinions and explanations, and they may be right, but this has cured my problem for the last 11days. Good luck.
Sent from my Galaxy Nexus using Tapatalk
horndroid said:
How is that possible?
Did you not shut down your TF?
Click to expand...
Click to collapse
No shut down. I would charge the TF to 100%. turn the screen on to see if its 100% charged and that's it. Then 8hrs or so later when I want to go use the TF, its dead. Can't even turn on.
Can this be the reboot issue or an application that is running and not letting my TF go to deep sleep? Help!
hipertec said:
No shut down. I would charge the TF to 100%. turn the screen on to see if its 100% charged and that's it. Then 8hrs or so later when I want to go use the TF, its dead. Can't even turn on.
Can this be the reboot issue or an application that is running and not letting my TF go to deep sleep? Help!
Click to expand...
Click to collapse
Your response makes no sense. You say TF was shut down then you say TF might not be going into deep sleep. If you power the TF down it will go off and use NO battery. you will get some battery internal discharge but TF will not come on an use battery. Try the same test shutting it off.
Ok...try again. I would charge the TF. Then check by pressing the power button. The screen goes on and shows 100%. Then press the power button to turn the screen off ( not turning it completely off).
When I want to use the TF, it won't turn on, as if its completely dead.
Suggestion?
its either a) you get a RR and get stuck in a bootloop, b) you got some app running that drains the battery, such as Winamp or c) your device is broken (not likely).
There are many threads already posted addressing this issue. Please Learn to correctly use the search function
•••THREAD CLOSED•••
Hi,
I've been using Nook for two years and Nook Simple Touch for 5 months or so.
I've rooted both my devices and used them that way (until my original Nook got those screen problems and became unusable)
Starting from first days I realized that the battery life was quite shorter than advertised. In fact it was almost unacceptable, like draining %10-15 a day while standing by (at the regular screensaver)
First I thought this was caused by the rooting and custom firmware. I tried the regular disabling of services, but to no avail. After a while I decided to return to the stock 1.1 firmware (on NST). To my horror I saw that nothing changed. Then I rerooted the hardware, still same.
One day, while I was reading a book I got a call and had to leave the house very fast. Thus I bagged the NST and got out of the house.
After returning home, I left that bag in my living room and did not open it for five days. After five days I picked up the NST, which was %70 charged five days ago, sure that I had to charge it again. To my surprise I saw that the charge was still %62. How could this happen, I began to querry. And remembered that I did not manually activate the screensaver -which was my general behaviour.
After that day I did not manually activate the screensaver even once and the battery drain is never more than 1-2%/day.
I'm not an Android developer, I'm a regular computer guy (using computers for almost 30 years) but I have strong gut feeling that this may be the problem, that manually activating the screensaver is not same as activation after a time out.
I guess many people over here, being -not regular users but optimization obsessed technical people- prefer to activate the screensaver manually. Thus they have the drain problem.
If you are suffering the same problem, please test this and write your feedbacks over here. May be one of the coders can look into this problem in the end.
With kind regards
You may be onto something there.
I certainly believe that the problems are related to not fully going into sleep mode.
I have caught the Nook many times that it was supposed to be sleeping and the touch screen was still running.
I always used the power button when I'm done, I had the screen timeout set on one hour.
I just set my screen timeout to 10 seconds to play with this.
I couldn't get the Nook to act up with the power button shutdown.
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
foredog,
Could you clarify a bit, please?
Nook can go into screensaver via
timeout,
front button,
back power button or
"button savior Off" button.
Which button you referring too to manually activate the screensaver?
foredog said:
After that day I did not manually activate the screensaver even once and the battery drain is never more than 1-2%/day.
Click to expand...
Click to collapse
I use my Nook Simple Touch minimally and almost always use the back button to activate the screensaver. I see pretty good battery life upto 20+ days. The only thing I do differently from you is turn off wifi before I activate the screensaver. Maybe wifi is the main cause for the battery drain.
--
cbay said:
I use my Nook Simple Touch minimally and almost always use the back button to activate the screensaver. I see pretty good battery life upto 20+ days. The only thing I do differently from you is turn off wifi before I activate the screensaver. Maybe wifi is the main cause for the battery drain.
Click to expand...
Click to collapse
WiFi is definitely a big one.
Any easy way to "auto turn it off" with screensaver activation?
Don't know about that - I always use the "sleep" button to activate the "screensaver". Right now, I'm up to a month of use, and like 30% batt still. I turn wifi on when I need it, and off again when I don't. Glowlight on for like 20 min/day.
Actually really impressed with NST Glow.
Sorry I did not mention, that my wireless is always off.
@Apokrifx: I'm using the power button at the back to go to sleep mode.
What you all are saying is similar to general behavior. Everyone is not experiencing this drain among Nook users, only some.
In my case, letting NST time out really solved the problem.
What Renate says is really similar to my experience. Time and time I accidentally touched the screen (while it was on the screensaver and it asked for the swipe motion (meaning the touch interface is responding) which should not happen in the sleep mode.
I'll let you know if anything changes.
Thank you for the feedbacks.
I think the original post info is quite accurate. I notice when I don't go back to the home screen, and leave it on the stock reader when I put it down-- battery life is much better.
It appears that, when the stock reader is running, it shuts down most background services. But, that's just a theory.
i guess when u activate ur screensaver that wont drain power from ur battery ..... cuz in screensaver mood the animation on screen stopped like calculator screen ..... just display image and didnt move any pixels on screen ..... so .... ummm .... i guess ur problem may u not charge battery well .... let me tell u .... u must per month empty the battery until nook tells u that ur nook device cant power on .... and that will guarantee to u long life to ur battery also keep ur battery more efficiently and working perfect
hope i helped ..... best regards
Actually, I've had no battery problems in a while.
I've got rid of almost all the B&N stuff though.
USB host mode, with its polling seems to take a bunch of battery though.
It's still manageable.
I got my glowlight nook recently(after I stepped on my old Nook ST, ouch). When you have glowlight on and the Nook goes into sleep mode the glowlight turns off. It happens even if you press the back button. But... I had few instances when the screensaver activated and the glowlight didn't turn off... Can't reproduce this issue too often and with glowlight at least I know when it didn't turn off But other services might have simmilar issue.
I wonder whether this has anything to do with the wi-fi sleep mode you can tweak on normal Android phones... maybe the default sleep disconnects the wifi too, while the sleep button in the back just activates the screensaver.
Renate NST said:
You may be onto something there.
I certainly believe that the problems are related to not fully going into sleep mode.
I have caught the Nook many times that it was supposed to be sleeping and the touch screen was still running.
I always used the power button when I'm done, I had the screen timeout set on one hour.
I just set my screen timeout to 10 seconds to play with this.
I couldn't get the Nook to act up with the power button shutdown.
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Click to expand...
Click to collapse
Hi,
The UK went crazy with the Nook last week and I got one. I also got the problem with the battery. I have tried this:
This is taken from qvc forum. I cannot paste the link, as this my first post. This is what Bogeygirl says: (you will need to google the text below, and find this on qvc)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I love my Nook Simple Touch that I purchased in February of this year. I was so disappointed that after this short time and charging to 100% it would drain to 8% over night..This happened twice. I did NOT have the wi-fi on and the automatic shutoff I had set to 2 minutes so no issue there. No recent updates had been done to cause an issue like this.
I was not worried because it was still under warranty and would be replaced. So I called B&N CS and went through all the steps with them to make sure it was in fact defective.
He asked me to totally shut it down and do a hard reset and re-re-register the unit. I was not hopeful that this would work at all. I know that a hard reset can fix a multitude of sins but I never would have thought it would work to fix this battery draining issue..To my surprise it worked.. Battery charge is holding just like before.. I read a lot and usually charge it once a month.. I am so glad that this worked. Such an easy fix but I will continue to monitor the battery charge just in case.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have tried it, and it seems to work fine, holding charge OK. Bogeygirl says hard reset, but it is the soft one. Foredog says that you don’t need to click the power button to sleep (just leave Nook to do the job for you), but I do click it to sleep, and I do also tap the screen, just to make sure that it is properly sleeping. It is fine at the moment. I think the whole problem with the battery is a software error with sleeping mode, as you say here. I think you are right.
I don’t have it rooted, as I only want it for reading.
Do you have any other advice for the battery? Or easier? I think everybody is having problems with the battery.:crying:
Thanks
Deep Sleep Battery Saver?
Does Deep Sleep Battery Saver help with the power-button not sleeping properly?
It performs several functions:
1. Supposedly automatically puts the device into sleep mode whenever the screen turns off (if you configure it properly).
2. Functions as a task killer, with a whitelist, to clear out buggy apps.
3. The Whitelist allows you to prevent useful apps from being killed.
I still use the power button to put the NST to sleep. Last night it drained about 7% overnight, although I leave WiFi on and read RSS feeds for an hour before putting it down. Also, DSBS is configured to wake up the device every four hours.
smayonak said:
Does Deep Sleep Battery Saver help with the power-button not sleeping properly?
It performs several functions:
1. Supposedly automatically puts the device into sleep mode whenever the screen turns off (if you configure it properly).
2. Functions as a task killer, with a whitelist, to clear out buggy apps.
3. The Whitelist allows you to prevent useful apps from being killed.
I still use the power button to put the NST to sleep. Last night it drained about 7% overnight, although I leave WiFi on and read RSS feeds for an hour before putting it down. Also, DSBS is configured to wake up the device every four hours.
Click to expand...
Click to collapse
The battery drain is due to some BN apps and Android System apps, mainly. I use the last version of "SystemApp Remover" for disabling apps (eg:AFfileDownloadService.apk,AccountAndSyncSettin gs.apk, BnAuthenticationService.apk, BnCloudRequestSvc.apk, DemoMode.apk, DeviceManager.apk, DeviceRegistrator.apk, Music.apk, NookCommunity.apk, Phone.apk, QuickStartActivity.apk, Shop.apk, Social.apk ,TelephonyProvider.apk, WaveformDownloader.apk).
kuskro said:
The battery drain is due to some BN apps and Android System apps, mainly. I use the last version of "SystemApp Remover" for disabling apps (eg:AFfileDownloadService.apk,AccountAndSyncSettin gs.apk, BnAuthenticationService.apk, BnCloudRequestSvc.apk, DemoMode.apk, DeviceManager.apk, DeviceRegistrator.apk, Music.apk, NookCommunity.apk, Phone.apk, QuickStartActivity.apk, Shop.apk, Social.apk ,TelephonyProvider.apk, WaveformDownloader.apk).
Click to expand...
Click to collapse
I thought it was due to the device not sleeping after the power button was pressed?
I also removed those APKs from the system directory, thanks to many of you guys.
Switching Wifi Off Worked Well
ApokrifX said:
WiFi is definitely a big one.
Any easy way to "auto turn it off" with screensaver activation?
Click to expand...
Click to collapse
I had a Kobo mini & was not happy with the formatting of PDFs, hence I *had* to get a Nook Simple Touch ... the PDF formatting is excellent. However, I soon suffered the battery problem & couldn't get it to charge. I followed the advice on this page and it works so much better now. This is what I did :-
1) Switch off the Wifi. I have no need for it anyway as everything I read is PDFs loaded via SD card.
2) To charge, make sure the device is fully off using the back power button.
3) I charge it using a wall socket, rather than a computer. I have heard that this makes a difference in charging times.
It's early days, regarding how long it stays charged, but I reckon I will be resorting to switching the power off, rather than putting it on standby. I'm just pleased I managed to get it to charge at all and I am back in business.
assembler31415 said:
I had a Kobo mini & was not happy with the formatting of PDFs, hence I *had* to get a Nook Simple Touch ... the PDF formatting is excellent. However, I soon suffered the battery problem & couldn't get it to charge. I followed the advice on this page and it works so much better now. This is what I did :-
1) Switch off the Wifi. I have no need for it anyway as everything I read is PDFs loaded via SD card.
2) To charge, make sure the device is fully off using the back power button.
3) I charge it using a wall socket, rather than a computer. I have heard that this makes a difference in charging times.
It's early days, regarding how long it stays charged, but I reckon I will be resorting to switching the power off, rather than putting it on standby. I'm just pleased I managed to get it to charge at all and I am back in business.
Click to expand...
Click to collapse
You probably don't want to resort to always powering off your Nook all the way, because the boot-up sequence uses about 3 or 4 times as much battery as regular use, making multiple reboots take up a large amount of battery.
Renate NST said:
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Click to expand...
Click to collapse
Is there a way to change default values?
I have a nook simple touch glowlight, it's about 5 years old. Recently it has been saying battery too low to use. I plug it in and it goes to restart right away. When I look at battery life it my be at 89% (this was today). Is there something I can do to make this stop? It's quite a pain to to this everyday. I read on this a lot about a 1000 pages per week. In the "old" days a charge would last 20-30 days! Please help, I hate to get a new on, I love my nook!
Hi All,
I recently purchased a DVP8 and I love this thing. Problem is, it suffers from wifi issues in that once it goes to sleep, the wifi automatically goes to "limited" and I need to retoggle the wifi setting to get it connected. I've tried all kinds of fixes - uninstall windows updates and reinstalling drivers, but to no avail.
So I basically said screw it, and set "sleep mode" to never on the power management option, and no more wifi issues. Seems like the wifi doesn't reactive properly when coming out to sleep mode. My question is - will this damage the tablet in the long run? In terms of battery life, I would think the main factor is the screen on time. I can just turn the screen off with a tap of the power button. Is there really that big of a difference?
Thanks!
Pretty sure on tablets like the DVP8, tapping Power is the same as letting it go into Sleep through inactivity (called "Connected Standby"). Most Atom tablets don't have a different sleep mode than that, not even just turning the screen off. I haven't checked on the DVP8 specifically, though; maybe it's different from the others...
It won't damage the tablet to stay on all the time, so long as you aren't running the battery all the way down. That does damage it, a bit.
All,
I've got a stock Nexus 6P, Android 6.0.1, build MHC19Q.
Sometimes the phone will go to sleep and sometimes it won't. In the settings, Display Sleep setting I have 30 seconds as the value, but I've seen my phone stay on for way longer, sometimes until I hit the power button.
I've tried several changes to the time but it doesn't seem to help the times it stays on, it just changes the time for the sleep when it does work.
To explain exactly, when I stop using my phone and I'm on the home screen, if I leave the phone alone for several minutes, it will not sleep, no matter what value I put in the setting. Other times it seems to sleep without a problem.
I've not been able to determine if some app is holding it awake, and I don't see any pattern the would point to any other condition that keeps the phone awake.
I looking for additional ideas to troubleshoot the problem, it just stays on and runs down the battery.
Ideas?
MB
Download and install GSAM. It will tell you specifically which app is keeping the screen on.
If it days Android, System, or Media Playback is the highest, it may be a tweak / custom rom / kernel issue.