need help flashing my atrix back to 2.3.4 gingerbread .
Sent from my MB860 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1163009
Try searching a bit..
Related
I an currently running ee with phoenix 1.43, . I was wanting to know if I could just flash a froyo rom on to of those. I am currently on the DI18 radio as well. I have searches but all of the current roms talk about using odin. Any help would be appreciated. Thank you.
Sent from my SPH-D700 using XDA App
You can flash dj29 froyo over dl18 however your current kernal is 2.1 only.
Sent from my SPH-D700 using XDA App
Btw dj29 froyo can be flashed through clockwork and flashing a dk05 or dk17 modem through odin is not necessary for dj29.
Sent from my SPH-D700 using XDA App
Thanks for the fast response, so would my 2.1 kernel hinder anything running the rom?
Sent from my SPH-D700 using XDA App
Your kernal is a 2.1(Eclair) kernal only. It will nor work if u decide to run a 2.2(Froyo) rom. All froyo roms have a kernal included however u may not want to switch over because all kernals for 2.2 are 1000mhz with no mods availible like undervolting or overclocking.
Sent from my SPH-D700 using XDA App
I have update the samsung i9000 phone with the 2.3.2 Rom bot the phone keeps on geting stuck can any one help
Sent from my GT-I9000 using XDA Premium App
loujack said:
I have update the samsung i9000 phone with the 2.3.2 Rom bot the phone keeps on geting stuck can any one help
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
what was the previous firmware?
did you backup?
if you flashed the first time: by what guide did you flash?
have you tried to flash the same ROM again?
have you had a lagfix enabled?
where does the phone get stuck? (samsung logo, boot animation, the strange graphics bug)
Do you get into recovery?
If you answered these, it would make helping easier
2.3.2 Rom
its beta not finished so as asked where did you get it from .
jje
JJEgan said:
2.3.2 Rom
its beta not finished so as asked where did you get it from .
jje
Click to expand...
Click to collapse
i second this.
Hello mate the verison before was the 2.2 that was a rom that was fine then i used odin to flash the rom 2.3.2 gingerbread on to the phone i did not do a back up and i have not tried to flash the rom again it get stuck when you open a app and use the phone then its get stuck
Sent from my GT-I9000 using XDA Premium App
The rom was a link from XDA i have lagfix voodoo toggle
Sent from my GT-I9000 using XDA Premium App
I think downgrading to any other ROM such as Darky's 9.2 or 9.3 should work
Good luck flashing!
Nitro
Disable lagfix, flash one of the froyo roms and then try again
You had lagfix on = bad .
Flash stock rom via Odin .
jje
Can anyone edit the title of the post? A lot of people are waiting for. 2.3.2 and this is very frustrating.
Thanks.
Mandado desde el móvil usando los dedos
hi!
how can I get the webtop to work on a CM7 Android 2.3.7?
I will get a lapdock, and i need it...
what do you recommend me guys?
thank you
Sigh. I recommend you read any of the cm threads. You will see that webtop only works in blur roms.
Sent from my Atrix 4G
d11dog11 said:
Sigh. I recommend you read any of the cm threads. You will see that webtop only works in blur roms.
can i downgrade the cm7 2.3.7 to a previous android version? or it will brick?
Sent from my Atrix 4G
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
As long as you don't flash a 2.2 froyo sbf you should be fine.
Sent from my MB860 using XDA App
Full wipe then flash gingermod or wet dream roms. This will get you webtop and a solid rom.
Sent from my Atrix 4G
Just purchased a dx off of swappa.com because my incredibles screen is shattered. Its gonna be my temporary phone until I can get the incredible repaired.
Sent from my ADR6300 using Tapatalk
Welcome to the DX family. If you're into custom roms I would suggest the Liberty 3 v2.0 rom. We don't have a whole lot of full functioning ICS roms available yet (camera driver issues) but they might be coming.
Prack said:
Welcome to the DX family. If you're into custom roms I would suggest the Liberty 3 v2.0 rom. We don't have a whole lot of full functioning ICS roms available yet (camera driver issues) but they might be coming.
Click to expand...
Click to collapse
Thanks, I was debating between keeping it stock or flashing liberty. With my history of bricking motos I think ill keep it stock.
Sent from my smashed ADR6300 using spaghetti
watt9493 said:
Thanks, I was debating between keeping it stock or flashing liberty. With my history of bricking motos I think ill keep it stock.
Sent from my smashed ADR6300 using spaghetti
Click to expand...
Click to collapse
It is impossible to brick a Droid X.
As long as your system version is not .621 you can root and flash any Gingerbread or ICS rom.
If your system version is .621 rooting and returning to an earlier build are impossible.
Sent from my DROIDX using Tapatalk
infazzdar said:
It is impossible to brick a Droid X.
As long as your system version is not .621 you can root and flash any Gingerbread or ICS rom.
If your system version is .621 rooting and returning to an earlier build are impossible.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
I've managed to brick quite a few defys. :thumbdown:
Sent from my smashed ADR6300 using spaghetti
watt9493 said:
I've managed to brick quite a few defys. :thumbdown:
Sent from my smashed ADR6300 using spaghetti
Click to expand...
Click to collapse
Luckily the Droid X is full-proof.
Sent from my DROIDX using Tapatalk
Yeah it's impossible to brick the droid x for the most part. Easy to soft brick but you can always sbf back. I've had great luck with all my motorola devices.
I've been using MIUI 2.2.5 for DX for the last few weeks. It's built off Gingerbread, but themed to ICS. It has full camera support and has been very stable for me.
Can anyone gtalk with me? I have a BUNCH of questions and don't wanna clog general. [email protected]
Sent from my DROIDX using Tapatalk
Is it a bad idea? will it give any problems?
Only battery may give issues without a battery patch in the gingerbread roms including stock. All 2ndboot builds will work the same way.
Oh, and model will change to defy+(cosmetic)
Sent from my MB526 using Tapatalk 2
thekguy said:
Only battery may give issues without a battery patch in the gingerbread roms including stock. All 2ndboot builds will work the same way.
Oh, and model will change to defy+(cosmetic)
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
can i flash back defy sbf after accedently flash a defy plus sbf?
Depends on which defy + sbf
Sent from my MB526 using Tapatalk 2
thekguy said:
Depends on which defy + sbf
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
How can i know if i can? You are giving me hope to get my life back
Sent from my MB526 using xda app-developers app
Check your version in settings, should be something like dfp231(not android version)
Sent from my Nexus 7 using XDA Premium HD app
I dont see it in the about section its only say what kernel and miui version.
I see the name of the file and tell you.
Sent from my MB526 using xda app-developers app
thekguy said:
Check your version in settings, should be something like dfp231(not android version)
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
DEFYPLUS_U3_4.5.1-134_DFP-161_HE this is the sbf that i accedently flashed.
is it reversable?
Here's the deal. DFP 161 is a BL6 sbf not a BL5. So if you came from froyo (probably 99.9% of all Defy's start on froyo), you cannot flash a froyo sbf otherwise you will get a black screen. However, as long as you stay away from BL7, there are plenty of ROMs and BL6 sbfs to choose from.
Actually, there is a Chinese BL6 froyo SBF, I used it once as a stepping stone to recover my phone, but it's saddled with bloatware and not good for daily use. Try DFP-125, it's a rock-solid stock ROM.
Check out Walter's sticky here: http://forum.xda-developers.com/showthread.php?t=966537 it's got all the SBFs.
And if i use a 125 (fot plus?) I will use it to use a cm7.2 or other gb rom? Or to use it as a stepping stone to get back?
Yes you can do that. But why do you want to flash the defy+ variant?
If you do that, you will have to use defy+ variant of cm7. If you want to use the defy variant, you must flash the froyo bl6 sbf and then flash any rom. ON STOCK ROM OF FROYO BL6 SBF DO NOT USE THE CAMERA OR YOUR FLASH WILL NEVER WORK AGAIN. You can use it on cm7 though
Sent from my MB526 using Tapatalk 2
thekguy said:
Yes you can do that. But why do you want to flash the defy+ variant?
If you do that, you will have to use defy+ variant of cm7. If you want to use the defy variant, you must flash the froyo bl6 sbf and then flash any rom. ON STOCK ROM OF FROYO BL6 SBF DO NOT USE THE CAMERA OR YOUR FLASH WILL NEVER WORK AGAIN. You can use it on cm7 though
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Its sounds scary to.me, what i ment to say is that cm7.2is giving me errors on my mb526. And i recall that on my original defy it worked well soi wanted to know if thers a way to turn it back to 525 and flash cm7.2
The errors described should be fixable with a data and cache wipe
Sent from my MB526 using Tapatalk 2
thekguy said:
The errors described should be fixable with a data and cache wipe
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
i tried to flash cm7.2 again on a 125 dfp sbf; no use still getting those errors as the phone come up even after 3 wipes
Try flashing system wiper script before installing rom. Also try more recent roms like cm10,cm10.1
Sent from my MB526 using Tapatalk 2
yaniv2203 said:
i tried to flash cm7.2 again on a 125 dfp sbf; no use still getting those errors as the phone come up even after 3 wipes
Click to expand...
Click to collapse
Hm. This is really strange.
If you've already flashed a defy+ sbf that's not BL5 or lower, then it is not possible to go back to a MB525 ROM. I think you should give CM10 a try.
---------- Post added at 12:35 PM ---------- Previous post was at 12:34 PM ----------
thekguy said:
Try flashing system wiper script before installing rom. Also try more recent roms like cm10,cm10.1
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
I'm pretty sure wiping /system on a locked bootloader will give you a brick and force one to flash another sbf, but that might be the solution in this case.
Wiping /system by itself does not brick the device; since he will be flashing the ROM immediately after it will be a clean install. The device is bricked if after wiping system no ROM is flashed and the user reboots
Sent from my Nexus 7 using XDA Premium HD app