Battery calibration guide needed experts please

Battery calibration guide needed experts please - Huawei Ideos X5 U8800

Hi to all i am facing massive drains in battery
My phone recharges in 1.5 hours completely.
But i dont think that this is reliable as if i use my ideos with automatic brightness and on demand 400-1000 franco kernel.i can play game for continously 1.5 hours maximum.
And on wifi its about 4 hours.
I think its battery calibration issue.
If any expert here make a guide to properly calibrate our batteries than we can get most out of them.
So experts please come one step ahead.
Sent from my HTC Pyramid using xda premium

To calibrate the battery you have to charge the battery to 100% and leave charging after 100% for about 30 minutes. After the 30 min, reboot into CWM, go into advanced and select Wipe Battery Stats. Reboot the phone again.
You won't notice much of change initially, because you have to repeat this process at least 3-4 times. In about a week time, you'll see that battery will last twice as longer.
This may not work for everybody, but it DEFINITELY worked for me.

Just download this app, plug your phone to charger, when that app shows over 4200mV press "Battery Calibration" button and then use your battery to 0% and then charge it back to 100%.

katu2006 said:
To calibrate the battery you have to charge the battery to 100% and leave charging after 100% for about 30 minutes. After the 30 min, reboot into CWM, go into advanced and select Wipe Battery Stats. Reboot the phone again.
You won't notice much of change initially, because you have to repeat this process at least 3-4 times. In about a week time, you'll see that battery will last twice as longer.
This may not work for everybody, but it DEFINITELY worked for me.
Click to expand...
Click to collapse
Gonna try this. The first time I did it I didn't notice much but today my battery has surprised me greatly.
Do you also use something Juice Defender?

NO juice defender app! That's making things worse, in my opinion.

Related

wipe battery stats

guys i have been getting very poor battery after i flashed my phone multiple times on a day...
i already tried the calibration app but it did nothing....
now how to wipe battery stats manually??

http://lmgtfy.com/?q=android+wipe+battery+stats+manually
http://forum.xda-developers.com/showpost.php?p=12697960&postcount=3

clarkkov said:
I love lmgtfy! makes me laugh every time!
[email protected]:
When you recalibrate your battery, it takes a few life cycles for the battery to stabilize and for Android to get an accurate reading. First life cycle is alway short. Of course, don't play with ROMs so much it may damage your phones read only memory.
I will post my battery life soon, I'm still waiting for the battery to deplete, I haven't recharged my phone in 4 days now after I calibrated my battery.
Click to expand...
Click to collapse
Wow 4days is huge,iam getting hardly 1day battery after calibrating yesterday....
Actually i removed my phone before getting the 100% notification....
So should i wait for battery to improve???
By the way,when did you calibrate???
Should i calibrate again????
If this wont work i will try terminal emulator method...
So in this method do we need to charge 100% or discharge completely??
Some precautions or just write those commands at any point of charge???
Iam wondering how to thank from the xda app
Thnx to both of u
Sent from my GT-I5801

Same problem here.
Battery drained from 100% to 60% in 3 hours, then to 15% after 5 hours. phone super hot! Widget showed temp 42°C !
Not even used the phone for more than 15 min! REALLY!
Then calibrated before 3 days, now a max of 1 day battery backup only.
Plz help.
And 1 life cycle means I must let the phone charge 100% then let it discharge till it's switched off.
And I should repeat the cycle.correct me if I am wrong.
And I have the habit of not charging to 100% in a single charge session, 2-3 breaks, should I change it?

clarkkov said:
If your phone is hot without you using it, something is running in the background, that shouldn't. Which ROM are you using and which tweaks/fixes have you applied?
One battery life cycle means battery drain from 100% (fully charged) to 1% (fully discharged). Your phone does not have to turn itself off, but make sure it is at 1% when you begin to charge it again. This is important only for a few cycles after calibration, afterwards you are free to charge it as you wish, but while calibrating it's highly recommended that you don't interrupt the charging process (4Hrs).
Click to expand...
Click to collapse
I am using rooted jpd from samfirmware, no fixes except sdcard speed fix, previously it used to give a good battery backup.
And apps do run in background.
Should I set autokill level to high in task killer?
And I will take care of charging.
Thanks for support.

on DDJP2.. getting a horrible backup since i have updated thru KIES. generally on jg6 used to get almost 1.5 days which has come down to 12-16 hours now. trying to calibrate my battery with app 'battery calibration'.. calibrated once.. but still no change. read somewhr that we get the same backup for first few times even after calibrating.. but to get sure i am writing down my process.. plz chk if m doing right or not ..
1. plug in phone with charger
2. wait till 100%.
3. press battery calibration or delete batterystat.bin with the help of root explorer.
4. unplug charger and use it till it discharges completely.
5. charge again to 100%.
plzzzz chk and tell.

plzz someone reply.

I have a question about batery drain. Apps on backgroung are drainning lot of batery? May i have to stop them always?
Send from my Lestatious 1.7 using XDA premium

clarkkov said:
Yes.
You need to be aware that wireless services are draining the battery the most. If you are not using 3G - switch it off, same with BT and WIFI. Widgets that update frequently also drain the battery fast, background data, auto sync services/features are battery killers, too.
Click to expand...
Click to collapse
Thanx for the reply.. i have calibrated once more.. but already showing 80% after hardly 2 hrs.. no clue whats going on... ppl with JP2 shud come up with thr battery backup to get confirmed.

and last thing am waiting for is that someone said .. battery life is worse for first few cycles after the calibration... thats the last hope... :'(

clarkkov said:
Yes.
You need to be aware that wireless services are draining the battery the most. If you are not using 3G - switch it off, same with BT and WIFI. Widgets that update frequently also drain the battery fast, background data, auto sync services/features are battery killers, too.
Sent from the other side
Click to expand...
Click to collapse
Thx for the aswer, i thought that all the background data are drain lot of battery. I'll try to calibrate and switch off all the thing i can and see if my battery lives more time

Hey there,
scince I use BatteryLeftWidget, I can see that my battery voltage only reches 4171mVolt.
So, batterystat.bin delete doesnt help, so anyone an idea where to put the 4200mV ?

Battery inaccurate after boot

Hi all
since a week or so i have a strange problem with my sgs and i hope you can help me to fix it
Everything works just fine (battery is accurate) until i switch off / reboot the phone
but at next boot the battery reports a very low value
(e.g. the phone has 55% battery left and after the reboot it reports only 8%)
with Froyo 2.2.1 (Speedmod Kernel) it would stay at that level until the battery has really drained to that point
With GB (JVQ - Galaxian Kernel) the battery percentage increases slowly
What i tried so far:
first of all, i deleted the battery stats for a few times and because that didn't work i upgraded to JVQ (with repartitioning and all), but that didn't solve the problem either
i don't really know what to do anymore and i hope someone can help me
thanks

Just do a few drain/ charge cycles and that should sort it
Sent from my GT-I9000 using XDA Premium App

First off, wiping batterystats.bin alone won't help.
Try this:
1. Charge to 100% until it says unplug charger.
2. Wipe batterystats.bin from recovery, unplug and then reboot
3. Drain your phone's battery until it shuts itself down
4. Charge to 100% without interrupting the charge
5. Enjoy :3

thanks for the quick replay!
unfortunately thats basically what i have already done
since the problem happened the first time, i have charged the phone at least 5 times and wiped the battery stats for 2 or 3 times right after charging the phone to 100%
its true that normally i don't drain the battery completely, but yesterday i have done just that and than let the phone charge overnight - but that didn't solve the problem
i will try to fully discharge the phone a few more times and load the battery while the phone is switched off
still i hope someone has an other suggestion how to solve this annoying problem
thanks

lol - stop deleting the batterystats.bin for starters.
The batterystats needs to indentify the top and bottom markers such as 0% - 100%, delete it ONCE.
Firstly, turn the phone off, charge the phone to 100%, bump charge it, till 100% truely.
This means, unplug...then plug it in again until you keep getting 100% show up.
Boot up into recovery then delete the batterystats.bin.
Use it heavy, activate everything and drain it. Make sure it is compeltely drained, try turning the phone back on, take the battery out for about 2 mins, try turning it on again, if it doesnt turn on, you've drained it.
Plug your charger in, do not turn the phone on, let it charge to 100%, again, bump charge it until 100% truely full, turn the phone on and let it run its natural course this time.
Do not delete the batterystats.bin again, you will have to repeat the process, it will take a good 2/3 times of charge/discharge for the stats to settle.
Hopefully helps dude! Good luck

thanks pidz!
just to clarify: i have had my sgs for a half year now and i never wiped the battery stats until last week
But i haven't tried bump charging jet - i really don't like that process as it is bad for the battery but might be worth a try, thanks

it usually happens with non original batteries. did you changed a battery? or maybe you got a fake one with you phone?

[HOW TO] Fix Battery Life: Ultimate guide (calibrate + post#2 -FIXES) UPDATED 25Aug

Standart disclaimer: I am not responsible if you break things by following this guide, though I will be genuinely surprised if you do.
Credits: This fix is a combination of battery management techniques discussed in the Atrix forums + a technique that I originally found in a Milestone forum (I didn't invent it, but I am too lazy to search who originally posted it ).
This worked in fixing the problem for me (the same problem that I see many others are writing about on the forums), but I can't guarantee it will work for you.
Who should use this? (aka your battery problem symptoms are
1. Battery life on 2.3.4 is significantly worse for you than before.
2. Battery stats are jumping and showing inconsistent information.
3. Your phone loses 30%-60% just by sitting there overnight.
4. Phone idle draining 30%-60% of battery just by sitting there overnight.
5. After flashing a couple of roms, your battery stats got messed up and the phone thinks it's at 100% charge while it's not.
I personally started having battery problems after flashing a couple of roms, applying 1% battery mod and despite flashing jug6ernaut's CWM battery fix.
When I went to bed with a 100% charge, I would wake up to a 50% charge, with Phone Idle process showing up as massacring the battery. The steps below successfully fixed the problem for me.
Prerequisites:
1. Atrix on one of the rooted 2.3.4 roms (ideally,- deodexed and with unlocked CWM)
2. Wall Charger
3. jug6ernaut's CWM battery fix (put it on your SD card you will need it later!) I have also attached it to this post.
4. Battery Calibration app from the market
5. Watchdog Lite or Full from the market
Instructions:
It's best to complete this procedure in the evening before going to bed, so you can leave it at 100% overnight and check in the morning if the drainage issue is fixed!!!
The whole procedure along with recalibration might take up to 5-6 hours!
1. Take the case off your Atrix (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your Atrix to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. (Explanatory pic, needed number circled in red). Write it down.
My Atrix was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your Atrix completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%. Back when I used a Milestone, it usually showed 60% after doing this.
10. Let it sit there charging for 2-3 hours.
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours, turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Install jug6ernaut's CWM battery fix (even if you had it installed before), do not reboot yet.
Do not disconnect it from the charger still!
13. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
14. When the phone turns on, go into BatteryCalibration app again and look up your MV numbers
- if you were like me, they should be significantly higher than before. After this whole process I had 4200MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
15. Before going to sleep - Install Watchdog from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
16. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
17. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
(Your general battery capacity should have increased, even if something still was draining the battery, you will be able to find the infringing process in WatchDog with the settings we've set up in step 15 )
That's all folks! Please report your success / lack of such here. Also, feel free to ask questions, and I along with other users with answer them according to our ability.
I will later add a section on "good practices for battery usage" with tips and tricks.
Cheers!
Attached are screenshots of my results after calibration: This was under moderate usage. Pretty damn good if you ask me.

Post-calibration methods of improving Battery Life
Updated: Post#2 will explain how to solve battery drainage problems when recalibration wasn't enough. It will also explain how battery reporting works, common practices, tips, tricks, etc.
Battery Tips / Tricks / Common Practices
Important things to know:
1. It's important to understand how battery indicator on Android works and how Android manages / reports your battery life. Please read this article:
Your Smartphone’s Battery Gauge is Lying to You (and it’s not such a bad thing)
http://phandroid.com/2010/12/25/you...is-lying-to-you-and-its-not-such-a-bad-thing/
2. Li-ion batteries used in modern smartphones don't have "charge memory". Partial charges won't hurt the battery (e.g. charging from 60% to 80% or from 10% to 50% etc). Feel free to give your phone small charges whenever you have time and need the phone to last longer.
3. Smartphone batteries don't like to be completely discharged or to be kept at 100% capacity for extended periods of time (this actually damages batteries over time). But worry not, the battery software prevents this from happening for you. That's why some of your phones never get to 100% or drop from 100% to 90% minutes after you disconnct the phone from a charger.
4. All batteries gradually lose a small percentage of their capacity after a certain amount of charge cycles. It's a natural part of life. It's always nice to have a spare battery or to purchase a replacement when your current battery isn't to the task anymore.
5. Don't pay much attention to the battery %, just use your phones. I know it's very tempting to track your battery usage every 15 minutes and try to find problems. Been there myself. Thing is, if you do this, you might start thinking you have problems, when you don't have any.
Bottom line - just try to use your phone and not mess with the battery unless problems become really apparent.
------------------------------------------------------------------------------
Other proven ways to improve Battery Life
If you have re-calibrated to a full capacity (4200mv) but your battery still drains terribly - follow these steps to pin point the problem.
1. Find which app / process is draining the battery.
If you get lucky, the infringing app will show up directly under the stock "Battery Usage" statistics. However, in most cases "Battery Usage" isn't very informative. Most people report that they only see "Phone Idle" consuming most of the battery without much insight into the details.
Things to do:
- install Watchdog, go to preferences, set CPU threshhold to 20% (or even lower if it's not enough), check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20%(or even lower if it's not enough) as well. Run it for a couple of days.
If you start getting frequent Watchdog notifications about a certain app breaching the threshold - uninstall it, find an alternative.
- install BetterBatteryStats from here -
http://forum.xda-developers.com/showthread.php?t=1179809 run it for a couple of days and monitor apps / processes that are using up more wakelocks than they should.
Once you find the infringing app - uninstall it, if it's a process - find out if it's safe to stop / freeze before doing anything.
2. Freeze bloatware aka "stop the problem before it becomes a problem."
Unless you are running CM7, your rom is based on stock 2.3.4 and still has blur in it. Blur apps and processes might be running without you even using them and sucking out precious batter life while they are at it.
Things to do:
- Get TitaniumBackup, freeze all bloatware that is mentioned as "safe" in this thread -
http://forum.xda-developers.com/showthread.php?t=1182663
Use your phone for a couple of days afterwards and watch for improvements.
If these software tweaks aren't enough, the problem might be with your system setup. Go through these steps which should hopefully fix your setup in favor of awesome battery life:
3. Flash a custom kernel, set up battery saving profiles.
Many people have reported success with this step. Custom kernels are not just for overclocking. A custom kernel with smart profiles will definitely give definitely extend your phones operating life during the day.
Things to do:
- Get a custom kernel., the popular choice on here seems to be faux'es kernel, so I recommend it -
http://forum.xda-developers.com/showthread.php?t=1156040
Get one of the battery saving SetCpu profiles along with it. Basically, a good battery saving profile looks something like this:
- absolute minimum CPU clock with screen off (something like 275 Mhz)
- lowering CPU clock with temperature > 50C (something like ~800Mhz)
- lowering CPU clock when battery < 30% (something like ~800Mhz)
Many people reported success in using such profile for lowering "Phone Idle" drain.
4. Flash a different radio.
WARNING: Be extremely careful with this. Flashing a wrong radio is the right way to hard brick your phone.
Although some people are reporting to have fixed battery drainage by trying out a different radio, I seriously wouldn't recommend going on a flashing spree unless you know what you are doing.
My advice here: flash the latest 2.3.4 for your carrier if you haven't yet. From there on, experiment at your own risk.
5. Disable Data and Wifi when idle either manually or with an app."
I seriously get surprised every time someone says they have a horrible battery life, when they keep an internet connection on at all times. Constant data always = battery drain.
Things to do:
- use apps like Green Power to disable data / wifi for you when you are not using it
- learn to turn off your internet connection manually
6. If all else fails - start over from scratch (read: clean install a rom).
I've heard reports of people getting better life with Froyo than GB, or that a specific custom ROM solved their problem for them. A million dollar question: if it works for you, why not use it?
Things to do:
- try a ROM without blur, like CM7
- try Ninja Speed Freak (developer and many users reported great battery life)
- if battery life is your top concern - try Froyo
------------------------------------------------------------------------------
FAQ
....coming soon...
... ask away!

Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?

eklam said:
Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?
Click to expand...
Click to collapse
Are you using stock Orange 2.3.4 rom?
If yes, your Rom might not have the battery jumping problem. You can still use this guide without the battery fix to recalibrate.
Let's wait for someone with Orange 2.3.4 to confirm if jug6ernaut's CWM battery fix can be used or not.

Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...

Question on step 4. To confirm, we shouldn't click on anything in BatteryCalibration, all that needs to be done is take note on the MV number, correct?

eklam said:
Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...
Click to expand...
Click to collapse
Did it only start doing this on 2.3.4 or you haven't checked before? Anyway, I would do the calibration to see if it changes anything.
coleburns said:
Question on step 4. To confirm, we shouldn't click on anything BatteryCalibration, all that needs to be done is take note on the MV number, correct?
Click to expand...
Click to collapse
No clicking in step 4. Just write down or remember the MV number.

Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it

eklam said:
Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it
Click to expand...
Click to collapse
You probably updated to 2.3.4 while not at 100% battery level, and it messed up your battery stat. So, yes, do all the steps in this guide except for jug6ernaut's battery fix part.

thanks, ill give this a shot....again.....tonight and hopefully it will fix my issue.

Screenshots of results added to post 1

Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App

jarsh92 said:
Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which download link? CMW_Jug6_FIXv2.zip?

I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.

ThickG said:
I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.
Click to expand...
Click to collapse
Seems like you used Battery Calibration while not at 100% charge and your battery stats got messed up.
The reason I recommend using CWM is because the battery stats file is created on each boot. So, with my instructions you can charge the phone to 100% while it's off and wipe the messed up stats before it boots.
You can try using my instructions, without the CWM part, except you need to wipe your battery stats with Battery Calibration app after step 4.

lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.

I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.

dictoresno said:
lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.
Click to expand...
Click to collapse
lol yes. I used video playback to drain mine. But if it's really a PITA, you can always just leave it till tomorrow to discharge naturally.
Jonous said:
I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.
Click to expand...
Click to collapse
Yep, that's why flashing only when at 100% charge always pays off.

I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium

CaelanT said:
I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium
Click to expand...
Click to collapse
After the calibration I had 4200mv, so it seems like you are doing things right in regards to the battery.
"Taking the battery out and putting it back in" trick works wonders though in restoring battery life to maximum state (if you had it decrease for some reason). I've tested it multiple times even back when I had the Milestone.