Database Users

Battery life problem - solution

I was pondering possible reasons for the battery life problem that many of us are well aware of. Some peoples batterys will last a good day or two and then theres people like me who charge my phone in the morning and when i get home in the afternoon just to keep it alive and this is compared with people using the same rom. So i thought maybe there could be something to do with what the battery level is when the phone is rooted or a new rom flashed, and this process may reduce the battery cycle to a specific point. E.g. if i 1st root and load my new rom on my phone at 50%, when booted it could show 100% but its actually 50% than it should be. i have not tested this but im just putting it forward as an idea. if anyone does have the time to unroot, charge to 100% and then reroot their phone + custom rom and test the battery life could they please post their results here. No harm in trying ...
EDIT:It seems we have found a solution or alteast a way to greatly improve battery life by putting my random idea and the information from maxisma togethere.. here are the following steps:
1. When the battery is low e.g. 10% boot into recovery mode and wipe->battery data
2. Reboot and then drain the battery or let it die (turn on mobile network add the 'sync now' widget and keep syncing with the music on loud - works pretty fast)
3. Leaving the phone dead put it on charge and let it charge fully till the led indicates green (may take longer than normal)
4. UNPLUG!! the charger then boot the phone up and your battery life should be much better
TIP!! Remeber when changing and flashing new roms to unplug the phone from charge after you boot!
Hope this works for you all PM me for results (i went from 5-10% loss an hour to what is now about 1-2% max )

Nice idea but almost certain your wrong
Edit: turns out that you shouldn't boot your phone while charging after all

I've think it's more likely to do with how I charge my phone. If I charge the phone on my PC then the battery lasts me a day. On Sunday night I charged it with a mains charger, and a day and a half later I still have 40% left. That's with constant WiFi, Talk, calls and text messages.
Sometimes I'll do the same things mentioned above and the battery will be about 20% by the time I'm going to bed.
I could be very wrong, I'm no battery expert!

There shouldn't be any difference between PC charging and mains charging. The mains charger would utilise a transformer to give the same oomph as a PC gives...if not it'd fry the battery whilst charging.
Funnily enough, mains AC - DC transforms are a little choppy, although at such a low current it should be entirely negligible, but your PC's power supply should give a cleaner power output than the mains. Are you sure it isn't just a placebo, I still like to think charging my PSP via the mains rather than USB will do it quicker and last longer, since its dedicated

TheAshMan said:
I've think it's more likely to do with how I charge my phone. If I charge the phone on my PC then the battery lasts me a day. On Sunday night I charged it with a mains charger, and a day and a half later I still have 40% left. That's with constant WiFi, Talk, calls and text messages.
Sometimes I'll do the same things mentioned above and the battery will be about 20% by the time I'm going to bed.
I could be very wrong, I'm no battery expert!
Click to expand...
Click to collapse
I've heard this theory before. I can't even begin to fathom how this could be possible. I hereby dismiss it as 'rubbish'.
Seriously though, I think it's far more likely to be related to the apps/widgets people are using after flashing the rom. The only thing that differs drastically from build to build is the different apps that people install.
Might be worth those with very crap battery lives sending me an hours worth of logcat. I can do an hours worth of logcat for myself (I never have battery issues), and compare the results.

He's partly right.
Android has a bug that when it's plugged into a charger while booting up, it'll report a higher battery status than it actually is.
This is preventing the phone from charging the battery completely.
So, a recommendation for you: Always unplug your phone from the charger before powering it up.

Attempt
Since my last post ive drained my battery out. Kept the phone off and charged it fully. It did take longer than normal which could be a good thing. Ive booted it up about 15 mins ago and il post later/tomorrow about how the battery performs now.

WOOO
I maybe jumping the gun a bit here but my phone says an up time of 1hour 27 mins. and normally its about an hour to about 5-10% of battery life and im sorry to say... im still on 100% WOO . I will still report how this lasts through to tomorrow, however i think theres enough evidence to suggest that the method stated earlier seems to fix what seemed to be a 'shortend battery cycle'. Anyone else with a short battery life i advise you to do the same asi have and please feedback to me with any results.. hope this has been helpful
EDIT: Its been two hours now and still 100% woooo

I got escited too bratfink when I had 100% battery for ages while it was in sleep, then I dl'd a few progs from market and whoosh my battery started disappearing faster than expected. Try downloading a few things and you'll see your battry disappearing quicktime.
minfree or ramzswap off could be causing the issue.
I remember before I put that tweak on my phone (when it first came out), my battery life was amazing.
After I put the values in for init.d as from the forum page below:
http://forum.xda-developers.com/showthread.php?t=622666&page=6
the battery life started disappearing like mad! and this was on a modaco rom!
I think now that all the new 2.1 roms are including this minfree tweak it is causing this battery issue to be carried over. All attempts to reduce battery drain are not having as much effect as they could because of this.
I would like to try one of these new roms without the tweak but I do not have the knowhow to stop it. i.e. put the original init.d (or equivalent) for the the roms in place.
You might argue that the memory clearing has nothing to do with the battey drain, but what i saw was that it did on a modaco rom. I don't know whether it is the switching of ramzswap or the minfree settings ( i have a feeling it is both.
Can a chef cook one of their roms without the tweak and keep the original settings?

adb remount
adb shell rm /system/etc/init.d/02memkill
then reboot.

kendong2 said:
adb remount
adb shell rm /system/etc/init.d/02memkill
then reboot.
Click to expand...
Click to collapse
I'm on the BeHero v1.3.2,m will that command put my phone memory settings back to what they would normally be without the taskkiller?
If so can I just remove that file with OI file explorer as atm my laptop usb aint working (can't connect to phone properly, can only charge)

If you use Bluetooth, GPS*, or plug/unplug usb, CPU lock at 528Mhz and battery drain. This happend in all eris/roms.
I can see with Battery Graph while I sleep the battery is full, but no reason (only unlock to check time, kill alarms, read mail,...) the battery drains constantly. (no tweeter, no facebook, no GPS, no BT,..),
This kernel sucks. It's very buggy but is what is

kendong2 said:
adb remount
adb shell rm /system/etc/init.d/02memkill
then reboot.
Click to expand...
Click to collapse
It's OK managed to fix the usb on my laptop.

I am currently performing the third step...i really hope this works cuz I am getting really really horrible battery life right now...I get only about 8 hours with ocassional use...like listening to music, browsing, taking pictures, sms.
thanks for posting this thread.
Ill post the results tomorrow ( hopefully positive)

I noticed that using the overclock widget (even with the lower clock option when screen is off) also eats some battery, it definitely reduced my usage time on Android 1.5.
Could someone confirm?

I dont know what it is and why people have this bad battery drain.
I have the VillainRom 3.4 installed. Totally NO drain. I turned on Bluetooth and called several times. Battery drain is 8% in 12 hours .
I did not install any widgets. Pure standard custom ROM with newest radio.

Leeejohn said:
I dont know what it is and why people have this bad battery drain.
I have the VillainRom 3.4 installed. Totally NO drain. I turned on Bluetooth and called several times. Battery drain is 8% in 12 hours .
I did not install any widgets. Pure standard custom ROM with newest radio.
Click to expand...
Click to collapse
exactly my view.

I'm using HeroDroid and i had really bad battery drain problem. I'm a sort of heavy user and with bluetooth & gps permantly on, my phone had drained out by lunch time. After doing some tests, i have found that my problem was related to GPS. If i boot my phone with GPS off and left it at off, i get the same battery level usage as my original cupcake 1.5 ROM. Perharps you guys can try it and post your results.

rubik said:
I'm using HeroDroid and i had really bad battery drain problem. I'm a sort of heavy user and with bluetooth & gps permantly on, my phone had drained out by lunch time. After doing some tests, i have found that my problem was related to GPS. If i boot my phone with GPS off and left it at off, i get the same battery level usage as my original cupcake 1.5 ROM. Perharps you guys can try it and post your results.
Click to expand...
Click to collapse
I found that to help as well. In the last 3h10m it only went down by 4%. That's definitely a lot better than what I was getting before and with the previous ROM. I am using the new Autokiller and Overclock widget if that helps any and booted up with my GPS off and followed the steps mentioned in the first post.

hmm if its the case that the phone is "capping" the maximum amount of charge the phone can have then it should take longer to charge also
my battery life i kinda okay, lasts 10-12 hours with intermediate use, using battey graph app it took me 70 mins to charge from 40% to 100%
ill let it drain out tonight and see how long it takes for a full charge
it would be good if we could compare results with people with and without battery problems

Updated from 2.2 to 2.2.1 now have Battery Issues :(

Hi all,
Basically a few days ago I updated the firmware via Kies from 2.2 to 2.2.1 on my Galaxy S. However, I instantly noticed a huge decrease in battery life - 50% gone overnight when in standby! So I factory reset the phone and had everything disabled - the phone only lost 10% in 24 hours. So I decided to try and eliminate the possible causes so first I turned on wifi and within 2 hours I have lost almost 30% of the battery life with no usage so wifi seems to be the culprit
In the wifi menu network notification is off, however, the device seems to be scanning for networks every 5-10 seconds even when connected! I had no problems like this on 2.2 where I could comfortably get 2 days usage with wifi on. Also as I would prefer wifi to be on constantly when connected I would prefer not to change the wifi sleep policy. Any suggestions would be much appreciated
Many thanks, and sorry if there's similar thread already

which version of 2.2 did you have before?
try a flash back and see what happens.

Or try to drain battery (do not charge till 1% or almost dead) then full charge it.
Always happen to me when I flash my phone to a new ROM.

Thanks for the replies. I've tried leaving the battery till it was almost drained but maybe I'll let it go completely flat and charge it see if that makes a difference?
Also trying juice defender from the market to see if that helps. Not sure if it is a problem with the firmware though been looking around and a few people seem to have had the problem with no real solution
Might have to go back to 2.2 but would prefer not to as I've noticed a big decrease in lag on 2.2.1. Also can't remember what version of 2.2 I had I'll see how the battery life goes over the next few days after trying a couple of drain/charging cycles hopefully won't have to downgrade it. Come on 2.3.2
Thanks for the replies so far

Battery Bug is Major issue with all the versions of 2.2.1, Battery life is very bad. Even the Browser is worst in 2.2.1. May be in 2.3 it will get fixed.
I have tested all the new releases of 2.2.1. I found its smooth and fast.

A1exM said:
... replies. I've tried leaving the battery till it was almost drained but maybe I'll let it go completely flat and charge it see if that makes a difference?
...
Click to expand...
Click to collapse
Very very bad idea to let the battery go completly flat, it's the best way to damage it and even lose 20% of his initial capacity. Never go under 10%.
To calibrate it properly, wait 10% turn off the phone, fully charge it, restart. (do it again 3 times).

ttf said:
Very very bad idea to let the battery go completly flat, it's the best way to damage it and even lose 20% of his initial capacity. Never go under 10%.
To calibrate it properly, wait 10% turn off the phone, fully charge it, restart. (do it again 3 times).
Click to expand...
Click to collapse
The battery is calibrated to do this already, the charging circuit will not allow power to the device unless there is a certain amount of charge in the battery. It's there to protect the battery from this exact eventuality.

bullzeye.za said:
The battery is calibrated to do this already, the charging circuit will not allow power to the device unless there is a certain amount of charge in the battery. It's there to protect the battery from this exact eventuality.
Click to expand...
Click to collapse
That's how it's supposed to be in an ideal world.

[HOW TO] Fix Battery Life: Ultimate guide (calibrate + post#2 -FIXES) UPDATED 25Aug

Standart disclaimer: I am not responsible if you break things by following this guide, though I will be genuinely surprised if you do.
Credits: This fix is a combination of battery management techniques discussed in the Atrix forums + a technique that I originally found in a Milestone forum (I didn't invent it, but I am too lazy to search who originally posted it ).
This worked in fixing the problem for me (the same problem that I see many others are writing about on the forums), but I can't guarantee it will work for you.
Who should use this? (aka your battery problem symptoms are
1. Battery life on 2.3.4 is significantly worse for you than before.
2. Battery stats are jumping and showing inconsistent information.
3. Your phone loses 30%-60% just by sitting there overnight.
4. Phone idle draining 30%-60% of battery just by sitting there overnight.
5. After flashing a couple of roms, your battery stats got messed up and the phone thinks it's at 100% charge while it's not.
I personally started having battery problems after flashing a couple of roms, applying 1% battery mod and despite flashing jug6ernaut's CWM battery fix.
When I went to bed with a 100% charge, I would wake up to a 50% charge, with Phone Idle process showing up as massacring the battery. The steps below successfully fixed the problem for me.
Prerequisites:
1. Atrix on one of the rooted 2.3.4 roms (ideally,- deodexed and with unlocked CWM)
2. Wall Charger
3. jug6ernaut's CWM battery fix (put it on your SD card you will need it later!) I have also attached it to this post.
4. Battery Calibration app from the market
5. Watchdog Lite or Full from the market
Instructions:
It's best to complete this procedure in the evening before going to bed, so you can leave it at 100% overnight and check in the morning if the drainage issue is fixed!!!
The whole procedure along with recalibration might take up to 5-6 hours!
1. Take the case off your Atrix (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your Atrix to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. (Explanatory pic, needed number circled in red). Write it down.
My Atrix was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your Atrix completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%. Back when I used a Milestone, it usually showed 60% after doing this.
10. Let it sit there charging for 2-3 hours.
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours, turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Install jug6ernaut's CWM battery fix (even if you had it installed before), do not reboot yet.
Do not disconnect it from the charger still!
13. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
14. When the phone turns on, go into BatteryCalibration app again and look up your MV numbers
- if you were like me, they should be significantly higher than before. After this whole process I had 4200MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
15. Before going to sleep - Install Watchdog from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
16. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
17. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
(Your general battery capacity should have increased, even if something still was draining the battery, you will be able to find the infringing process in WatchDog with the settings we've set up in step 15 )
That's all folks! Please report your success / lack of such here. Also, feel free to ask questions, and I along with other users with answer them according to our ability.
I will later add a section on "good practices for battery usage" with tips and tricks.
Cheers!
Attached are screenshots of my results after calibration: This was under moderate usage. Pretty damn good if you ask me.

Post-calibration methods of improving Battery Life
Updated: Post#2 will explain how to solve battery drainage problems when recalibration wasn't enough. It will also explain how battery reporting works, common practices, tips, tricks, etc.
Battery Tips / Tricks / Common Practices
Important things to know:
1. It's important to understand how battery indicator on Android works and how Android manages / reports your battery life. Please read this article:
Your Smartphone’s Battery Gauge is Lying to You (and it’s not such a bad thing)
http://phandroid.com/2010/12/25/you...is-lying-to-you-and-its-not-such-a-bad-thing/
2. Li-ion batteries used in modern smartphones don't have "charge memory". Partial charges won't hurt the battery (e.g. charging from 60% to 80% or from 10% to 50% etc). Feel free to give your phone small charges whenever you have time and need the phone to last longer.
3. Smartphone batteries don't like to be completely discharged or to be kept at 100% capacity for extended periods of time (this actually damages batteries over time). But worry not, the battery software prevents this from happening for you. That's why some of your phones never get to 100% or drop from 100% to 90% minutes after you disconnct the phone from a charger.
4. All batteries gradually lose a small percentage of their capacity after a certain amount of charge cycles. It's a natural part of life. It's always nice to have a spare battery or to purchase a replacement when your current battery isn't to the task anymore.
5. Don't pay much attention to the battery %, just use your phones. I know it's very tempting to track your battery usage every 15 minutes and try to find problems. Been there myself. Thing is, if you do this, you might start thinking you have problems, when you don't have any.
Bottom line - just try to use your phone and not mess with the battery unless problems become really apparent.
------------------------------------------------------------------------------
Other proven ways to improve Battery Life
If you have re-calibrated to a full capacity (4200mv) but your battery still drains terribly - follow these steps to pin point the problem.
1. Find which app / process is draining the battery.
If you get lucky, the infringing app will show up directly under the stock "Battery Usage" statistics. However, in most cases "Battery Usage" isn't very informative. Most people report that they only see "Phone Idle" consuming most of the battery without much insight into the details.
Things to do:
- install Watchdog, go to preferences, set CPU threshhold to 20% (or even lower if it's not enough), check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20%(or even lower if it's not enough) as well. Run it for a couple of days.
If you start getting frequent Watchdog notifications about a certain app breaching the threshold - uninstall it, find an alternative.
- install BetterBatteryStats from here -
http://forum.xda-developers.com/showthread.php?t=1179809 run it for a couple of days and monitor apps / processes that are using up more wakelocks than they should.
Once you find the infringing app - uninstall it, if it's a process - find out if it's safe to stop / freeze before doing anything.
2. Freeze bloatware aka "stop the problem before it becomes a problem."
Unless you are running CM7, your rom is based on stock 2.3.4 and still has blur in it. Blur apps and processes might be running without you even using them and sucking out precious batter life while they are at it.
Things to do:
- Get TitaniumBackup, freeze all bloatware that is mentioned as "safe" in this thread -
http://forum.xda-developers.com/showthread.php?t=1182663
Use your phone for a couple of days afterwards and watch for improvements.
If these software tweaks aren't enough, the problem might be with your system setup. Go through these steps which should hopefully fix your setup in favor of awesome battery life:
3. Flash a custom kernel, set up battery saving profiles.
Many people have reported success with this step. Custom kernels are not just for overclocking. A custom kernel with smart profiles will definitely give definitely extend your phones operating life during the day.
Things to do:
- Get a custom kernel., the popular choice on here seems to be faux'es kernel, so I recommend it -
http://forum.xda-developers.com/showthread.php?t=1156040
Get one of the battery saving SetCpu profiles along with it. Basically, a good battery saving profile looks something like this:
- absolute minimum CPU clock with screen off (something like 275 Mhz)
- lowering CPU clock with temperature > 50C (something like ~800Mhz)
- lowering CPU clock when battery < 30% (something like ~800Mhz)
Many people reported success in using such profile for lowering "Phone Idle" drain.
4. Flash a different radio.
WARNING: Be extremely careful with this. Flashing a wrong radio is the right way to hard brick your phone.
Although some people are reporting to have fixed battery drainage by trying out a different radio, I seriously wouldn't recommend going on a flashing spree unless you know what you are doing.
My advice here: flash the latest 2.3.4 for your carrier if you haven't yet. From there on, experiment at your own risk.
5. Disable Data and Wifi when idle either manually or with an app."
I seriously get surprised every time someone says they have a horrible battery life, when they keep an internet connection on at all times. Constant data always = battery drain.
Things to do:
- use apps like Green Power to disable data / wifi for you when you are not using it
- learn to turn off your internet connection manually
6. If all else fails - start over from scratch (read: clean install a rom).
I've heard reports of people getting better life with Froyo than GB, or that a specific custom ROM solved their problem for them. A million dollar question: if it works for you, why not use it?
Things to do:
- try a ROM without blur, like CM7
- try Ninja Speed Freak (developer and many users reported great battery life)
- if battery life is your top concern - try Froyo
------------------------------------------------------------------------------
FAQ
....coming soon...
... ask away!

Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?

eklam said:
Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?
Click to expand...
Click to collapse
Are you using stock Orange 2.3.4 rom?
If yes, your Rom might not have the battery jumping problem. You can still use this guide without the battery fix to recalibrate.
Let's wait for someone with Orange 2.3.4 to confirm if jug6ernaut's CWM battery fix can be used or not.

Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...

Question on step 4. To confirm, we shouldn't click on anything in BatteryCalibration, all that needs to be done is take note on the MV number, correct?

eklam said:
Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...
Click to expand...
Click to collapse
Did it only start doing this on 2.3.4 or you haven't checked before? Anyway, I would do the calibration to see if it changes anything.
coleburns said:
Question on step 4. To confirm, we shouldn't click on anything BatteryCalibration, all that needs to be done is take note on the MV number, correct?
Click to expand...
Click to collapse
No clicking in step 4. Just write down or remember the MV number.

Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it

eklam said:
Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it
Click to expand...
Click to collapse
You probably updated to 2.3.4 while not at 100% battery level, and it messed up your battery stat. So, yes, do all the steps in this guide except for jug6ernaut's battery fix part.

thanks, ill give this a shot....again.....tonight and hopefully it will fix my issue.

Screenshots of results added to post 1

Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App

jarsh92 said:
Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which download link? CMW_Jug6_FIXv2.zip?

I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.

ThickG said:
I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.
Click to expand...
Click to collapse
Seems like you used Battery Calibration while not at 100% charge and your battery stats got messed up.
The reason I recommend using CWM is because the battery stats file is created on each boot. So, with my instructions you can charge the phone to 100% while it's off and wipe the messed up stats before it boots.
You can try using my instructions, without the CWM part, except you need to wipe your battery stats with Battery Calibration app after step 4.

lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.

I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.

dictoresno said:
lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.
Click to expand...
Click to collapse
lol yes. I used video playback to drain mine. But if it's really a PITA, you can always just leave it till tomorrow to discharge naturally.
Jonous said:
I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.
Click to expand...
Click to collapse
Yep, that's why flashing only when at 100% charge always pays off.

I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium

CaelanT said:
I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium
Click to expand...
Click to collapse
After the calibration I had 4200mv, so it seems like you are doing things right in regards to the battery.
"Taking the battery out and putting it back in" trick works wonders though in restoring battery life to maximum state (if you had it decrease for some reason). I've tested it multiple times even back when I had the Milestone.

Battery calibration guide needed experts please

Hi to all i am facing massive drains in battery
My phone recharges in 1.5 hours completely.
But i dont think that this is reliable as if i use my ideos with automatic brightness and on demand 400-1000 franco kernel.i can play game for continously 1.5 hours maximum.
And on wifi its about 4 hours.
I think its battery calibration issue.
If any expert here make a guide to properly calibrate our batteries than we can get most out of them.
So experts please come one step ahead.
Sent from my HTC Pyramid using xda premium

To calibrate the battery you have to charge the battery to 100% and leave charging after 100% for about 30 minutes. After the 30 min, reboot into CWM, go into advanced and select Wipe Battery Stats. Reboot the phone again.
You won't notice much of change initially, because you have to repeat this process at least 3-4 times. In about a week time, you'll see that battery will last twice as longer.
This may not work for everybody, but it DEFINITELY worked for me.

Just download this app, plug your phone to charger, when that app shows over 4200mV press "Battery Calibration" button and then use your battery to 0% and then charge it back to 100%.

katu2006 said:
To calibrate the battery you have to charge the battery to 100% and leave charging after 100% for about 30 minutes. After the 30 min, reboot into CWM, go into advanced and select Wipe Battery Stats. Reboot the phone again.
You won't notice much of change initially, because you have to repeat this process at least 3-4 times. In about a week time, you'll see that battery will last twice as longer.
This may not work for everybody, but it DEFINITELY worked for me.
Click to expand...
Click to collapse
Gonna try this. The first time I did it I didn't notice much but today my battery has surprised me greatly.
Do you also use something Juice Defender?

NO juice defender app! That's making things worse, in my opinion.

PROPER battery calibration... is getting on my nerves :/

So, I am using MIUI 2.1.12 with LorDModUE 8.6 CFS 2WCR kernel.
I have installed 4EXT Recovery Controller and CurrentWidget.
With CurrentWidget, I monitored the battery while charging until it reached 0mA (which means the battery is as full as it can get).
With 4EXT Recovery Controller I removed the batterystats.bin file.
I drained the phone until it shut itself down. Then I charged it (without powering it on) until it was full (LED was green).
I power on the phone... 99% battery.
I plug in the charger... it says 26mA (which means it would reach 0mA as in full charge in another 20-30 minutes).
WHAT THE HELL?!
This never happened while I was using the default CM kernel included in MIUI. Only happened with Tiamat and LordMod.
--
Seriously, guys, what is the best way to calibrate the battery?! Perhaps I should not have let it shut itself down, but plug the charger when the phone was at 1% (which lasted for another 20-30 minutes, by the way)?!

if I don't remember it wrong the LED turns green at 90%.

afair the battery doesn't get charged during booting. which means that you probably lost the 1% during boot.

I also used the same method and got it calibrated correctly
but is their any other way too ?

monki79 said:
if I don't remember it wrong the LED turns green at 90%.
Click to expand...
Click to collapse
The LED turns green on AOSP ROMs at 90%, when the phone is ON, as far as I know. When it is OFF, it works fine (goes green at 100%).
I want to hear from the developers / those that know how these codes work and stuff... Cause I don't want to look at my phone how the percentage goes down so fast, then, when it reaches 10%, I can play Pocket Legends for another 20 full minutes -.-

Formhault said:
With CurrentWidget, I monitored the battery while charging until it reached 0mA (which means the battery is as full as it can get).
With 4EXT Recovery Controller I removed the batterystats.bin file.
I drained the phone until it shut itself down. Then I charged it (without powering it on) until it was full (LED was green).
I power on the phone... 99% battery.
I plug in the charger... it says 26mA (which means it would reach 0mA as in full charge in another 20-30 minutes).
WHAT THE HELL?!
Click to expand...
Click to collapse
The battery doesn't charge to full capacity first time around. When I used to calibrate the battery I would charge until it was drawing 0mA, then reboot; it would be drawing about 26mA, so I'd charge to 0mA again and reboot; it would now be drawing about 15mA, so I'd carry on charging to 0mA, reboot, repeat, repeat and repeat until it eventually continued to draw 0mA after a reboot. Then I'd delete the batterystats.bin file.
As one of Google's engineers says, deleting your battery stats isn't going to improve your battery life. I haven't done any of that for a long time now and I've noticed precisely no difference (except for the extra time I've gained by not having to wait for it to finally charge up to full capacity).

hopscotchjunkie said:
The battery doesn't charge to full capacity first time around. When I used to calibrate the battery I would charge until it was drawing 0mA, then reboot; it would be drawing about 26mA, so I'd charge to 0mA again and reboot; it would now be drawing about 15mA, so I'd carry on charging to 0mA, reboot, repeat, repeat and repeat until it eventually continued to draw 0mA after a reboot. Then I'd delete the batterystats.bin file.
As one of Google's engineers says, deleting your battery stats isn't going to improve your battery life. I haven't done any of that for a long time now and I've noticed precisely no difference (except for the extra time I've gained by not having to wait for it to finally charge up to full capacity).
Click to expand...
Click to collapse
I know about Google's statement.
The battery would drain fast, then, when it reaches 1% or 5%, you would be able to use your phone like it had 30%. Just that it shows the values wrong. Calibrating the battery should fix that...
Anyway... I'm not going to struggle any further.

I'll tell what I've done;
- I have installed Battery Balibration app and CurrentWidget,
- Waited battery charging till reached 0ma,
- Removed battery stats and restarted,
- Then waited to drain battery and shut-down itself,
- I connected USB charger to PC and TURN ON THE PHONE !!
- Again waited battery to reach 0 ma,
- Then plugged off and monitored that current widget shows the range btw 3-10 !!
I don't know exactly if it helps but, maybe you should turn on your DHD while carging..
For further instructions you may qant to check this topic;
http://forum.xda-developers.com/showthread.php?t=1226016
Formhault said:
So, I am using MIUI 2.1.12 with LorDModUE 8.6 CFS 2WCR kernel.
I have installed 4EXT Recovery Controller and CurrentWidget.
With CurrentWidget, I monitored the battery while charging until it reached 0mA (which means the battery is as full as it can get).
With 4EXT Recovery Controller I removed the batterystats.bin file.
I drained the phone until it shut itself down. Then I charged it (without powering it on) until it was full (LED was green).
I power on the phone... 99% battery.
I plug in the charger... it says 26mA (which means it would reach 0mA as in full charge in another 20-30 minutes).
WHAT THE HELL?!
This never happened while I was using the default CM kernel included in MIUI. Only happened with Tiamat and LordMod.
--
Seriously, guys, what is the best way to calibrate the battery?! Perhaps I should not have let it shut itself down, but plug the charger when the phone was at 1% (which lasted for another 20-30 minutes, by the way)?!
Click to expand...
Click to collapse

Theres a better alternative, use the battery calibration app in the market
https://market.android.com/details?id=com.nema.batterycalibration&hl=en
It's always worked a charm for me.

knp3385 said:
Theres a better alternative, use the battery calibration app in the market
https://market.android.com/details?id=com.nema.batterycalibration&hl=en
It's always worked a charm for me.
Click to expand...
Click to collapse
Right, with Battery Calibration i have solved my problem with battery, now i can use all day without charging.

Sorry if my question is a silly one...
what's the point in calibrating your battery? I mean... except for the stats (and I guess, the percentage in the bar), do you improve your battery life by calibrating it?

Duwie_80 said:
Sorry if my question is a silly one...
what's the point in calibrating your battery? I mean... except for the stats (and I guess, the percentage in the bar), do you improve your battery life by calibrating it?
Click to expand...
Click to collapse
Some says it's irrelevant, calibrating it's just an illusion
But did calibrate my battery and my battery life is improved too terrific !!

Duwie_80 said:
Sorry if my question is a silly one...
what's the point in calibrating your battery? I mean... except for the stats (and I guess, the percentage in the bar), do you improve your battery life by calibrating it?
Click to expand...
Click to collapse
fremce said:
Some says it's irrelevant, calibrating it's just an illusion
But did calibrate my battery and my battery life is improved too terrific !!
Click to expand...
Click to collapse
I don't really know. It would be silly for the Android system to display the battery percentage (up there, in the status bar) by reading the batterystats.bin.
My phone's battery level drops somewhat fast, then, when it would reach 30% or so, it doesn't drop as fast. Also, at times, when I reach 10%, 5% or even 1%, I am still able to play an intensive game like Pocket Legends for an extended ammount of time (30 minutes, for example). Pocket Legends is CPU/GPU intensive and it also requires an active Internet connection, so I'd say it's pretty power hungry.
I don't really get the entire purpose of calibration. I have done it and I can't seem to notice any difference.
I'm going to do it again, now, because I switched to a Sense ROM (RunnyDrOiD). I'll monitor the battery with Battery Monitor Pro. When it reaches +0mA, I'll reboot and so forth so forth until it's drawing 0mA, although I doubt I'll resist that much time, so I'll just delete the batterystats.bin after a few reboots, when it reachs 0mA.

fremce said:
Some says it's irrelevant, calibrating it's just an illusion
But did calibrate my battery and my battery life is improved too terrific !!
Click to expand...
Click to collapse
If everybody knew the meaning of the word "calibration" then nobody would talk such nonsense.
Calibration improves the accuracy of the percentage shown!
The illusion is that you improve your battery life with it....

Dlog said:
If everybody knew the meaning of the word "calibration" then nobody would talk such nonsense.
Calibration improves the accuracy of the percentage shown!
The illusion is that you improve your battery life with it....
Click to expand...
Click to collapse
As I said... calibrating the battery may fix the "problem" where once you reach 1% / 5% you can use your phone like it still had ~20%.

I'm gone test it too...

Hi there people, I didn't find any battery thread similar to what I'm going to say so I'll spam a little bit
I've just found as I was fooling around this: http://www.ebay.com.au/itm/PowerSki...AU_MobilePhoneAccessories&hash=item20c1a1c8ad
It suppose to be a silicon case with a battery build in(1500mah ..not bad), I don't know the dimensions but I just someone might think it as a solution to our 1230mah small battery(with this you have a total of 1730mah which is plenty)
P.S. To mods.. feel free to delete my post, I just wanted to inform the people about a solution that might be handy

evronetwork said:
Hi there people, I didn't find any battery thread similar to what I'm going to say so I'll spam a little bit
I've just found as I was fooling around this: http://www.ebay.com.au/itm/PowerSki...AU_MobilePhoneAccessories&hash=item20c1a1c8ad
It suppose to be a silicon case with a battery build in(1500mah ..not bad), I don't know the dimensions but I just someone might think it as a solution to our 1230mah small battery(with this you have a total of 1730mah which is plenty)
P.S. To mods.. feel free to delete my post, I just wanted to inform the people about a solution that might be handy
Click to expand...
Click to collapse
https://www.google.com/search?q=xda+powerskin+desire+hd
first link....