SGS2 is auto switching network operator - Galaxy S II General

I have the choice of being on either the Orange network or T-mobile network here in the UK due to their signal sharing deal. My native network is Orange.
On the SGS I was able to set which network I wanted and my phone would stay on it and it would not change. Alternatively I could set it on "select automatically" and it would switch between them when the one it was on drops or it thinks the other signal is stronger.
Now I have a SGS2 and it no longer does this, it automatically switches between the networks even if I have selected the one I want manually. The problem is at my home and where I work the Orange signal is too poor to make calls so I want to keep it on t-mobile. Problem is it keep switching back to Orange and then I go to take a call but the signal is so bad I can't hear the other person!
This issue could potentially be a huge problem for me. Is there anyway round this?

Related

Problem with phone signal

Hello!
I spent last week in France and I had a lot of problems with GSM signal. Phone sometimes can't connect to operater. When I looked in settings menu I saw only ''searching'' and nothing happend. Then I just click on ''Find network'' and after some second everything was OK.
For me is this a big problem because I must be reachable all the time.
What could be wrong and how could I solve the problem?
Bye,
Borut
I'm on radio 1.38.00.11, and I have the same problem too... sometimes it does not even get any signal after trying to "find network". When I disable the phone and enable it again (flight mode and back) it will get full signal, I'm at the same spot for the whole process so its not the reception of the location.
Any idea?
I sent also an E-mail to HTC support team and still waiting an answer.
I got this answer:
Good Afternoon,
?
Unfortunately this can happen sometimes when roaming, especially if the SIM from your network does not have the preferred roaming partners programmed into it.
?
What tends to happen is that as the phone is switched on in the new country, it will automatically search for all networks in range and then systematically attempt to register and connect with all of them one by one.? Sometimes, depending on the speed with which the networks respond to the handset's requests to register, this can take a few minutes, especially if there are many networks in range.? It can also happen as the signal from one network disappears and the phone must begin this process again.
?
One thing I would suggest would be to contact your Operator and ask them for the name of the preferred roaming partner of the country you are travelling to and upon arrival in the country, you can manually select the network to connect to.? this should then tell the phone to keep with that network until it loses signal, but it should automatically return when the signal is found again.
?
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
?
Best regards,
Pete Whiteley
HTC Europe

Dropping calls

Does anybody else have a problem on o2? For the past few days my HD has been very flakey.
o2 are usually spot on in my area, the phone has good signal and what is happening most of the time is ill take a call then after 20-60seconds it will cut off and play the "duur duur" noise.
Is there anything i can further do to trouble shoot this problem and see if its a phone or possible network problem?
same to me
It happens to me too, but in Serbia, with Telekom network operator. So it is regardless of the network. Only thing that comes to my mind is connection setup update that I have recently did. Found out that call is dropping when I change network station cell or type of connection (from gprs to edge or 3G)
I tried to make new connection setup, will report with findings...

Hero, have to choose: Data/3G or voice calls, HTC reinvet the 90's!

Hi,
after having several missed calls going straight to my answering machine on my new HTC Hero. I was getting a bit paranoiac, so I've decided to test in/out calls.
Basically, 90 of my incoming calls were going straight to my answering machine. Out-call were about 30% KO
After several tests, to make sure there was a problem, I've decided to request for support from HTC.
Support told me that I should shut the 3g connection every time I would want to receive a call .
So I tried and Bingo, if 3G is activated, I get 10% of the calls, if I deactivate it 90% success.
So you'll say, I should be happy? Right? Wrong!
The main use of that kind of phone is to have a data integration, otherwise I would have kept my old nokia from 10 years ago..
Here basically, if I follow HTC idea, I should keep the 3g closed, sometime, I should switch it on to get my mails, thanks to the non true push capacities (ok this one is not htc) then wait for the sync, maybe force it , get my mails, and then, shut 3g back and pray that no Über important call would have been done.
Well that plain sucks!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
works fine on mine....i suggest you are on a ****e network, or on only 2G where you are. that's what usually causes this.
I guess they suggested this because it sounds like your network hasn't figured out how to route calls properly on their network when data is active, and they dump it straight to voicemail when there is a data connection active.
not the phone's fault, the phone won't even know that the call has been missed, the network simply does not route the call through and sends it to voicemail instead.
i had this on O2 a while ago. went to t-mobile (who knew how to set up their network properly for data) and never had this issue since when i am on 3G coverage. if i'm on 2G signal and have active data then yes, i miss calls. but that's how 2G networks operate.
it's truly shocking how many networks out there have absolutely no idea how to set up their networks properly for data!
Well I wish it would be that, my signal goes from -63 dbm 25 asu(80% of the time) to -81 dbm 16 asu.
Just after my post, I called one of my friend working in carrier terminal validation.
What he told me was, 2 options:
- Same bug was on the htc cruise, bug got corrected after a fw update.
- Some of my carrier radio are buggy and 3g goes over gsm.(SFR/VOdaphone France)
I bet for the first option since I had the problem in various places since I didn't want to ask support for nothing and get busted for a " feeling and not facts" (did the test in 3 differend location 80 tests in total(I used to be a tester....).
I will update the topic if I get news about it
nmuncer said:
!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
Click to expand...
Click to collapse
You shouldn't accept it - but most people don't have this issue!
It's unlikely to be a "bug" per se, because otherwise it would be endemic behaviour, so it's either:
1. Your physical device (get it changed!)
2. Your network.
In addition, just an FYI in case you've got the new Sprint Hero, but most CDMA networks (including Sprint) do not support simultaneous voice and data. I've no idea what happens in practice on Sprint, but I'd imagine if you were actively using data your voice calls would get diverted to voicemail unless Sprint automatically suspends data when a voice call is pending.
Regards,
Dave
You're on SFR?
OUCH!!!!
Sounds like you have a nice strong signal, but is it 2G or 3G? (do you see a G, E 3G or H at the top of the screen?
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
And yes, there were a few issues with the P3300 and the cruise, but they were mainly on Bouygues, not so much on SFR.
There's nothing known of on the hero, and as SFR sell the Magic, i would have thought they would have ironed out any issues already...
Hi,
I'm mostly in HSDPA or 3G.
I still have contacts with people at SFR (used to work there till recently) they might share a bit of info.
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
rhedgehog said:
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
...
Click to expand...
Click to collapse
Regarding this and your suggestion that 2g and data will result in missed calls, Can you suggest how to avoid this happening? I live and work in the country and only have 2g, so have found quite often people have mentioned my phone not even ringing- straight to answer phone. This explains it.
Nice to know, but annoying if I can't solve it- I run a business and my phone is very important.
Cheers,
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
i have sprint as well and when someone calls you when youre running hybrid, you should not miss calls. you will get disconnected from the internet when someone is calling though
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
Hi, I'm on hybrid
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
If you use AnyCut, you can create a short cut by selecting:
New Shortcut->Activity->Phone info
This will create a shortcut on your homescreen which beings up a hidden "engineering" screen on which you'll find an drop down for "Set preferred network type" where you can select WCDMA only.
Regards,
Dave
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
rhedgehog said:
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
Click to expand...
Click to collapse
holy monkey! im going to try this!!! do i have to di it everytime i turn the phone of or is it permanent?
orouborus said:
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
Click to expand...
Click to collapse
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
tsekh501 said:
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
Click to expand...
Click to collapse
true true. i usually charge my phone everynight though. problem that i have with 2g is that i cant send and recieve mms and yeah data connection is slow. in our place 3g signal is ok. i also lock my topaz for wcdma only. but it is ok that it switches to 2g in low signal areas.
Thanks!
You actually use mms?
Wow, they do exist.
barryallott said:
You actually use mms?
Wow, they do exist.
Click to expand...
Click to collapse
yeah... mms is great. i use it to send items that i wish to purchase etc.
What NOM1 Networks are there in the UK? I only get 2g in my area (booo) and could do with an operator that works right. T-Mobile forums suggest they still have an issue
Hi
I've checked it with Hero running in PlusGSM in Poland.
Regardless if I select 2G/3G or even "WCDMA preffered/GSM Only/WCDMA only" setting the phone is not available for incoming voice calls during data transfer. Every time when I start internet connection (example: SSH session) I'm not available for incoming calls. At this site I do have both strong 2G and strong 3G networks.
I would like to mention that a few days ago I've swapped Samsung SGH-i600 (WinMo 6.0) for HTC Hero - so I'm using the same SIM card in the same network and the same place. SHG-I600 was able to perform both data transfer (on 2G) and voice (on 3G) on the same time. HTC Hero is not...
I wonder if this is 'feature by design' or a bug in software?

Manual network selection not working

Hi,
I got a problem that makes me crazy.
I leave in Switzerland, near the border with France.
As in Switzerland GSM transmitter have lower power than in France, my HD2 switch very often to french network and don't come back to home one (even when home network is stronger than french one).
In phone settings, I set "network selection" to Manual.
But phone seems to ignore this settings, and as soon as home network is unavailable, it switch to roaming, without asking ... And never come back to home network till roaming network is unavailable too (which is rare, due to stronger power).
Any one got an idea why manual network selection is not working ?
For your information, I always had this problem since I got a HTC with WM5/6
(got it with my Touch and my Diamond)
Another option could be to completly disable roaming (any way can be used), and when travelling, I can switch roaming back on.
Is this possbile ?
Thanks
my configuration is in my signature
A little up, in case someone got a response

H910 - Always connects to other networks when signal is low (only for 911 )

Like the title says, the H910 connects to any network when the selected/preferred network is not available or has low signal. It doesn't matter if you manually select a network, if the signal goes very low it will connect to some other network.
The result is that you see "bars" but is not connected to the intended network and you may not realize that you are out-of-service. With an AT&T simcard you cannot select a network but even when traveling with a foreign sim (where the network selection is available) is still doing that.
Also, when is connected to the other network, you don't see the network name and if you try to make a call you get the "emergency calls only" message.
Probably this is considered a safety feature. Is there a way to turn this behavior off? I want my phone to be out-of-service if there is no signal. Especially since the signal at my home is very marginal lately and I would like to know whether I have service or not (at the moment I assume that if I see more than 2 bars that I don't have service).

Categories

Resources