Anyone seen this? I pair my phone (villainrom) with my a2dp receiver on my stereo. Works great. When I close the music or audio app, it shows as still being connected but no audio is heard. To get it working i need to go into bt preferences, disconnect and reconnect. Which works but is a bit irritating.
Anyone seen this?
Sent from my GT-I9100 using Tapatalk
I'm on VR3.0 and a2dp works with no issues (jabra bt3030)
This helped me a problem with A2DP:
http://forum.xda-developers.com/showthread.php?t=1293239&highlight=music+ice.
I use Omega rom 2.0. I believe it will help you.
Related
if am using the bluetooth to sync and stayed connected then using the bluetooth headset to any the call.
is it possible?
thanks
there is another thread on this. initial tests such as with my jabra 200 show it does NOT work..... seems the BT headset only works when it has a monopoly over the phones BT.
I have successfully made my ANYCOM stereo Bluetooth headphones ( http://tuxtops.com/node/464 ) to work wtih my HTC Wizard using the "wireless stereo" instructions that were posted the other day on this forum.
When you set it as "wireless stereo", is it supposed to also switch to handsfree functionality automatically? You see, over here this doesn't happen. The music stops when I get an incoming call, but I don't get the person's voice through my headset. The headset does not switch to handsfree mode.
Is this normal? Or something else is wrong?
I connected to my headset by clicking "set as a wireless stereo". If I also click "set as a handsfree", I don't get any music you see. So, why my headphones don't automatically change mode to handsfree on an incomming call? Anyone else with this problem?
i have the same problem but it doesn't bother me.
but if there is a fix then this would be cool and easier.
A2DP support for HTC Wizard can be obtained by using this hack/tweak: http://forum.xda-developers.com/viewtopic.php?p=275506#275506
didn't try it myself, but has been reported to work on HTC Wizard and other Windows Mobile 5 devices.
CIAO!
VOODOOS!L
Any solution so far?? I will receive my Anycom BSH-100 within the next days...
I don't think there is a solution apart from praying for a new ROM.
it might be a problem with the headset and rom
did you try repairing it?
because i know everything works fine for me using itech stereo
when a call comes in, it switches no problem
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
I was wondering if there was a way to make my EVO play music through my Jawbone Bluetooth headset? I like to listen to Pandora Radio and it would be nice to get it to play though my headset!
Thanks!
I have no problem listening to Slacker radio through my Jawbone Icon. I installed the Jawbone A2DP upgrade.
I have the icon as well but cant figure it out! Do I need to install something on the EVO?
brnail said:
I have no problem listening to Slacker radio through my Jawbone Icon. I installed the Jawbone A2DP upgrade.
Click to expand...
Click to collapse
Nevermind, I got it working after going to the Jawbone site and doing the update... Works pretty good and has great sound!
evo doesn't work with icon
I have an evo and a new jawbone icon with updated A2DP installed, but can't get it to play music over the icon unless I'm engaged in a phone conversation. How can I get it to play? I have re-booted and re-paired it many times. I found another post complaining of the same thing. Did you actually get it to play over the icon from an evo? email me with instructions. Jawbone tech support was not able to help because they had not tested it on an evo.
I don't have the icon myself, but if applying the A2DP update makes it the same as any other A2DP headset, you might want to go to settings > wireless & networks > bluetooth settings, then go down to bluetooth devices and hold down the entry for the icon, then select options. If its like any other A2DP headset there should be checkboxes for Phone as well as audio, as phone calls and A2DP are different streams and updating the icon to include A2DP after you've already paired may not have refreshed the available services that are seen by the phone.
Yes, I am using the Icon and Evo to listen to Pandora. Make sure to delete your current paired Icon. When it repairs it shoud show it as a actual headphone headset symbol on the phone instead of the ear piece only. Once connected it should automatically play through the Icon. If not I would retry updating the A2DP, perhaps it didnt work...
Thanks for Jawbone A2DP Info
I'm still using Hero but linger on EVO forum, happy I did for the jawbone update!
how do you switch between the music coming out of the bluetooth and the speaker with the Bluetooth connected?
You can't... You have to turn off bluetooth before the speakers will work.
Sent from my PC36100 using Tapatalk
Switch Bluetooth
Mu5ic92 said:
how do you switch between the music coming out of the bluetooth and the speaker with the Bluetooth connected?
Click to expand...
Click to collapse
Use the menu to turn blue-tooth off from your earphone.
jjjjayd13,
it works now
martouf13 said:
Yes, I am using the Icon and Evo to listen to Pandora. Make sure to delete your current paired Icon. When it repairs it shoud show it as a actual headphone headset symbol on the phone instead of the ear piece only. Once connected it should automatically play through the Icon. If not I would retry updating the A2DP, perhaps it didnt work...
Click to expand...
Click to collapse
Great suggestion... thank you. I un-paired the icon, then re-installed the A2DP software, re-paired it, and it worked! It must not have properly installed the first time. Thanks for you help!
Thanks for the suggestion. I re-installed the A2DP software and then it worked.
Hi guys!
So, the Xperia support A2DP just fine, also in combination with my car stereo (a Pioneer Avic D3BT set). However, I find that when I start playing audio (doesn't matter if this is music or satnav guidance) before I start the car (and hence the stereo set), not only will the audio not be re-routed to the stereo, but the phone also fails to connect with the A2DP part. Phone audio (headset profile) is connected OK, though.
Is this normal behaviour/has anyone seen the same behaviour?
Oh, and if anyone has a way of transferring contact to the phonebook of the car, I'd be delighted to hear about it. For me, it will immediately disconnect if I even attempt to transfer a phonebook item.
Hey Stampot. I have a Pioneer BROWSE system(BTB200) and I have the same problem. I find if I activate the phone bt after the car is on, A2DP connects fine. But if I do it the other way around,I only get phone audio. To fix I either have to disable/enable the phone bt or (the faster way) toggle the a2dp option. I'm hoping a de/firmware upgrades fixes the prob.
-------------------------------------
Sent via the XDA Tapatalk App
Its works better when u start the car first and that should not be a problem, shouldn't????
Its the same with every Bluetooth Headset. U can do it with the other way, but u must choose the Audioconnection in the Bluetoothsettings manually.