Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
Hello,
I used to have a palm treo 650. I like its orinal palm ring tone. Now , I need it for my HTC Diamond. Can you tell me where can i find it ? I did resource , but couldn't find it
Here you go... gotta remove the .zip I needed to add that to upload the file. Taken from my Treo 700wx and used on my Diamond...
for the non-tech savy people....
Hi all,
I'm considering buying (not really, Voda will bring me one for free) a Pro. I have a Diamond right now, but I miss the way my old 750 works, specially the way the "Home/Phone" works.
I know Treo pro doesn't work like other Treo WM devices, but, it's possible to add all this stuff on the Pro? I'm specially interested in the active call plugin, and the Phone menu in today Screen.
Active Call Plugin
I've got the active call plugin working on mine. I copied the relevant registry entries across from my 750 and all the dll's that were referred to in the registry.
John
johnjtaylor said:
I've got the active call plugin working on mine. I copied the relevant registry entries across from my 750 and all the dll's that were referred to in the registry.
John
Click to expand...
Click to collapse
Great News!!!
And what about different resolution? The plugin resizes itself? Can you put some screenshots?
this thread has some helpful info.
http://discussion.treocentral.com/showthread.php?t=174916
The Treo Pro does support searching names as you type on the today screen by default. Gotta love it
You have never used the treo 700 I take it... the contact interaction is off the CHAINIZZLE on those devices... I hope to see it someday on my pro...
I did own a Treo 750.. ..does that count?
Picture Speed Dial
Can I get the Picture Speed Dial from the Today Screen I had on m y TREO 800 to my TREO PRO?
http://discussion.treocentral.com/treo-pro/179209-palm-tweaks.html
I use these tweaks constantly.
Dear all,
this topic has been raised already many times in the HTC Raphael Forum, but it seems like nothing happened yet.
The idea is to use the touch sensible area around the DPad to control a mousepointer on the Touch Pro device.
Link to other post:
http://forum.xda-developers.com/showthread.php?t=477112&highlight=mouse+pointer
Is there somebody out there interested?
It would make many people happy I think.
Thanks and have a nice evening,
Bytecube
The best would be this mousepointer app in combination with something like SimpleOS.
http://forum.xda-developers.com/showthread.php?goto=newpost&threadid=497023
Dear all,
I did some research (took very long time;-) on this topic and found two programs. One program is simulating a mousepointer which can be controlled by the D-PAD. THe other program is able to read the data of the touch sensitive pad of the lower area of the HTC Touch Pro. Both inclusive source code (attached).
First I tried to do it myself, but my programming skills of C++ is not enough and I failed. :-(
The simplest way would just be first to merge those two programs...
I attached all files, maybe somebody of you can help me?
Thanks in advance! This would really be a great and still missing app for the HTC Touch Pro.
Best regards,
Bytecube
Dear all,
after long time searching I found the answer: GScroll 1.5 Beta
http://mobilesrc.com/forums/topic.asp?TOPIC_ID=122
In the new version of GScroll you can find GCursor which simulates a mouspointer which can be controlled by the touchpad.
Best regards,
Christopher
Hi to all,
First i like to say hello to everyone, I've recently join Xda developer, this is my first post. I would like to know if anyone have tried Pointui on Treo Pro. If so what is the outcome? i like to try it on my Treo Pro, but i don't see any square screen apps in Pointui.
Thanks
Its fully compatible
Its a amazing app, for me the only trouble is with realVGA, on the 96dpi settings, the screen on home 2 is aligned to left =/
If anyone knows how to fix that, i apreciate.
Thanks man, i will try it, i hope it doesn't slow down my Treo.