I've just updated my Franco.Kernel to the 23 Sep release and it doesn't 245 mhz anymore. I've heard people say it can damage my phone but now it feels buggy sometimes. So post your settings here!
Now I have 544-1024 and smartassv2 as governor.
480/1400 smartassV2. no buggy here!
JogeTheMan said:
I've just updated my Franco.Kernel to the 23 Sep release and it doesn't 245 mhz anymore. I've heard people say it can damage my phone but now it feels buggy sometimes. So post your settings here!
Now I have 544-1024 and smartassv2 as governor.
Click to expand...
Click to collapse
i changed my lowest to sth like 345 after i read that too
using ONDEMAND btw
I use 345/1024 MHz, ONDEMAND governor and NOOP sheduler with no problems and pretty good battery...
hi there.. i installed ff kernal 23 released and with miui 1.9.16.. my x5 setting always go back to default setting after i reboot my phone. for example i disable softkey haptic feedback, but once i reboot , it goes normal.. someone help me plss
Thanks for the replies! Will try them out!
alexchin91 said:
hi there.. i installed ff kernal 23 released and with miui 1.9.16.. my x5 setting always go back to default setting after i reboot my phone. for example i disable softkey haptic feedback, but once i reboot , it goes normal.. someone help me plss
Click to expand...
Click to collapse
Never happened to me. Wipe cache and dalvik, if it doesnt work reflash miui and ff kernel.
Sent from my u8800
I got 368/1516 vrio and smartass2, and the phone is stellar.
u8800,cm7,[email protected]
PlanDreaM said:
I got 368/1516 vrio and smartass2, and the phone is stellar.
Click to expand...
Click to collapse
OK thanks. Still trying to find the most stable settings. Where can I change the io scheduler?
Sent from my Huawei u8800 using XDA App
JogeTheMan said:
OK thanks. Still trying to find the most stable settings. Where can I change the io scheduler?
Sent from my Huawei u8800 using XDA App
Click to expand...
Click to collapse
If you have MIUI you can change it in the X5 settings, or you can download an app like "No frills cpu" an change it there you can read about i/o scheduler here thanks to that guide I now use vr
Learned a lot!
skifyr123 said:
If you have MIUI you can change it in the X5 settings, or you can download an app like "No frills cpu" an change it there you can read about i/o scheduler here thanks to that guide I now use vr
Click to expand...
Click to collapse
With the newest ffkernel i find that 400-1200 smartassv2 is the most stable. Thanks for help everybody!
alexchin91 said:
hi there.. i installed ff kernal 23 released and with miui 1.9.16.. my x5 setting always go back to default setting after i reboot my phone. for example i disable softkey haptic feedback, but once i reboot , it goes normal.. someone help me plss
Click to expand...
Click to collapse
Yup, the same here!
Related
Hi there!
Please, can anyone help me where I can get setcpu.txt file to set up my SetCpu on custom
iivanovic said:
Hi there!
Please, can anyone help me where I can get setcpu.txt file to set up my SetCpu on custom
Click to expand...
Click to collapse
You can create it, cimple create a new text file, rename it to setcpu.txt, and add frequencies. Example: 176000,480000,5280000,576000
Edit: I added my setCPU.txt
Thank you so much,guys!
Take care!
Mod edit: not dev related, moved to general
I just tried this but my 32b does not change to max 710 even though I am selecting that...it still shows 576...an ideas?
I am running Cyanogen 6 btw.
Where do you put this .txt so system can recognize it? Isn't it kernel related cpufreq, so you can clock your cpu?
WoblyGoblin said:
Where do you put this .txt so system can recognize it? Isn't it kernel related cpufreq, so you can clock your cpu?
Click to expand...
Click to collapse
30 seconds on Google got me here.
THx a lot DonJuan, but can you post you screenshots of your profiles, i installed program,put .txt file, found it with prog,put widged,ignore listed,made profiles and still it says 576 MHz
Your not going to get above 576 MHz unless you flash a OC kernel. Google for dumfuq kernel and you should find a thread called kernel corner that's here in the XDA forums. I'm using the 614 MHz kernel right now and I've been running for over 24 hours without a hiccup.
Sent from my HTC Magic using XDA App
Thx a lot, so I was right at first it is kernel related, but thx again, will try
Does this work on the Gome Flytouch with 256MB of RAM. I see it posted for Android OS v1.6 but there is no SetCPU.txt for ARM926xx which runs at 350MHz but on all these sites that read VIA 8505 suppose to do 450MHz to 533MHz.
Well I assumed that since you posted in the myTouch 3G forums that you had one.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
Your not going to get above 576 MHz unless you flash a OC kernel. Google for dumfuq kernel and you should find a thread called kernel corner that's here in the XDA forums. I'm using the 614 MHz kernel right now and I've been running for over 24 hours without a hiccup.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
I tried that and now I am stuck on the My Touch booting screen...any ideas?
Type in the SetCPU in the Google Search this is were I had ended up.
shaolin95 said:
I tried that and now I am stuck on the My Touch booting screen...any ideas?
Click to expand...
Click to collapse
You flashed the wrong one. Put your fastboot info here (back+power).
Sent from my HTC Magic using XDA App
Serris said:
You can create it, cimple create a new text file, rename it to setcpu.txt, and add frequencies. Example: 176000,480000,5280000,576000
Edit: I added my setCPU.txt
Click to expand...
Click to collapse
...i´m lg optimus x2 user. which values do i have to put in the setcpu.text?
Doesn't work the way I wanted it to. You can make your own .txt file but that doesn't mean it will listen to it. The app allows you to set it but the device doesn't run at those frequencies that you've put in the .txt.
It's really too bad too. I wanted to O/C mine to 1.5ghz and I suppose the kernel only allows 1400 & 1600. No middle point! 1400 is fast and 1600 is too much. 1500 is perfect yet I can't set that.
sigh.
franky_z said:
...i´m lg optimus x2 user. which values do i have to put in the setcpu.text?
Click to expand...
Click to collapse
Franky did you ever find the values for the setcpu.txt fe? if not i may have some ideas. or if you have could you take the time to post them? i have a G2x and need specific values.
Hi, folks! Are you ok?
I'm new here (indeed in the Android's world), I can't post in development forum, so here I am.
I have instaled my first custom ROM right now, Kyrillos' ROM, but looks like de overclock feature not works.
My decision to choice this ROM its about a video I saw in YouTube showing the overclock in 1.3GHz, so, for me, this is a very important feature.
I check this in the setCPU and the value stills 667. I followed all the instructions, all the rest its run like a charm, I can run live wallpapers now and all the stuff, but the overclock thing is perturb me...
Anyone can help me with that?
PS: Sorry about not put the thread in the [OFFICIAL] Kyrillos' ROM Problems, Questions & Answers...
Hi..
choose a kernel from [URL="forum.xda-developers.com/showthread.php?t=1129367]here[/URL] which best suits your needs and flash it just like you flashed the rom.. You'll be able to overclock after that
Next time ask here dude...
vikraam said:
Next time ask here dude...
Click to expand...
Click to collapse
He gave a PS
Rapier07 said:
Hi..
choose a kernel from [URL="forum.xda-developers.com/showthread.php?t=1129367]here[/URL] which best suits your needs and flash it just like you flashed the rom.. You'll be able to overclock after that
Click to expand...
Click to collapse
Hi! Thank you for your fast reply!
So, that's another flash thing. OK. So, my serious doubts:
1 - Overclock that way may harm my phone? Life time of processor, battery temperature, things like that...
2 - What you indicate to my device (Samsung Galaxy 3 i5800), "performance" or "ultimate"?
Regards!
vikraam said:
Next time ask here dude...
Click to expand...
Click to collapse
My mistake, very sorry...
tarciozemel said:
Hi! Thank you for your fast reply!
So, that's another flash thing. OK. So, my serious doubts:
1 - Overclock that way may harm my phone? Life time of processor, battery temperature, things like that...
2 - What you indicate to my device (Samsung Galaxy 3 i5800), "performance" or "ultimate"?
Regards!
Click to expand...
Click to collapse
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Rapier07 said:
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Click to expand...
Click to collapse
Tell me one thing, if the voltages are not raised, how come battery consumption is more?? I am guessing, increase in frequency increases temperature and hence raises consumption. Or is it something else??
dhirend_6d said:
Tell me one thing, if the voltages are not raised, how come battery consumption is more?? I am guessing, increase in frequency increases temperature and hence raises consumption. Or is it something else??
Click to expand...
Click to collapse
I've got no idea about that but overclocking doesn't cause much battery drain.. It drains more due to data connection specifically 3G..
Rapier07 said:
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Click to expand...
Click to collapse
Understood.
But, a last thing before try this: in the thread, theres a warning "Convert filesystems to rfs before flashing kernel."... So, how exactly I do that?
Thank you again!
tarciozemel said:
Understood.
But, a last thing before try this: in the thread, theres a warning "Convert filesystems to rfs before flashing kernel."... So, how exactly I do that?
Thank you again!
Click to expand...
Click to collapse
Navigate to android/data/fugumod on your sdcard.. Make a new file named
fs.convert
Open it and in a text editor and type
Stl6 rfs
stl7 rfs
Stl8 rfs
Save the file and reboot your phone
Rapier07 said:
Navigate to android/data/fugumod on your sdcard.. Make a new file named
fs.convert
Open it and in a text editor and type
Stl6 rfs
stl7 rfs
Stl8 rfs
Save the file and reboot your phone
Click to expand...
Click to collapse
You don t have to convert. That was only for the earlier versions of G3Mod. You can flash kernel directly without converting.
dhirend_6d said:
You don t have to convert. That was only for the earlier versions of G3Mod. You can flash kernel directly without converting.
Click to expand...
Click to collapse
Indeed, the instalation was automatic and painless and now I'm at 950MHz!
Last doubt: I need keep the setCUP installed for anything?
tarciozemel said:
Indeed, the instalation was automatic and painless and now I'm at 950MHz!
Last doubt: I need keep the setCUP installed for anything?
Click to expand...
Click to collapse
Yes. It controls the CPU frequency. If you don t have that how will you change frequency and set profiles?? You have to have it.
@Rapier07
@dhirend_6d
Guys, very very thank you for your patience! Thanks to you my phone is mutch better now!
I'll continue exploring this fantastic Android's world!
Great regards!
so when we flash this kernel will it replace Kyrillos ROM or is it an add-on ??
shubhamvadhera said:
so when we flash this kernel will it replace Kyrillos ROM or is it an add-on ??
Click to expand...
Click to collapse
The kernel won't change the Rom.. your data.and settings will be intact.. it allows you to overclock your device
tarciozemel, can u tell me step by step, how u chg ur kernel , because mine have same problem with u, unable to overclock more then 667ghz , thks!
fnixirix said:
tarciozemel, can u tell me step by step, how u chg ur kernel , because mine have same problem with u, unable to overclock more then 667ghz , thks!
Click to expand...
Click to collapse
Download the the kernel that you want from here.
The details of the various kernels are as follows : -
Lite : - NON OC
Performance : - 190-950 MHz
Ultimate : - 200-1200 MHz
Extreme : - 200-1400 MHz
Copy the required .zip of the kernel to the SD card and apply via CWM recovery or just flash the .tar as one package using ODIN.
Then use SET CPU to overclock.
The users of JellyBlast have faced some problems with Merruk Kernel..I personally have faced these--
1. The Boot-Sound comes first at the Galaxy Y boot-logo..After playing it, comes the Boot-Animation.
2. Random-Reboot issue-Phone reboots 2-3 times a day!
3. Auto-Close and freeze on some browser. e.g.: Opera Mobile.
I increased the RAM with Swap-Partition and increased the Internal Memory with Link2SD and Partition-Problems 2 & 3 were gone-Believe me, my phone didn't at all reboot for 5 days
Another thing, you can try is keep the phone using all the time, i.e. you have to play or browse the phone all the time, press menu and back again..Keep doing it...Or better keep it connected to computer or charger..Before doing the partition procedure I tried these and it worked..The Phone doesn't reboot when it is kept connected to something..Above all, avoid keeping the phone in Deep Sleep
And another, keep the min. Frequency at 832 MHz and max. at 1.248 GHz..Thanks to Sir anmolsharma1293 for helping me!
Included with help from Sir Anmol Sharma(Thank you Sir ) : FOR THE RANDOM REBOOT ISSUE, KEEP THE GOVERNOR AS 'lionheart' AND i/o AS 'sio'......
Try these and reply if it works...
Ritayan Roy said:
The users of JellyBlast have faced some problems with Merruk Kernel..I personally have faced these--
1. The Boot-Sound comes first at the Galaxy Y boot-logo..After playing it, comes the Boot-Animation.
2. Random-Reboot issue-Phone reboots 2-3 times a day!
3. Auto-Close and freeze on some browser. e.g.: Opera Mobile.
I increased the RAM with Swap-Partition and increased the Internal Memory with Link2SD and Partition-Problems 2 & 3 were gone-Believe me, my phone didn't at all reboot for 5 days
Another thing, you can try is keep the phone using all the time, i.e. you have to play or browse the phone all the time, press menu and back again..Keep doing it...Or better keep it connected to computer or charger..Before doing the partition procedure I tried these and it worked..The Phone doesn't reboot when it is kept connected to something..Above all, avoid keeping the phone in Deep Sleep
And another, keep the min. Frequency at 832 MHz and max. at 1.248 GHz..Thanks to Sir anmolsharma1293 for helping me!
Try these and reply if it works...
Click to expand...
Click to collapse
Bro the 1st & 2nd problems r kernel related and random reboot issue has already been solved....
We hv found a temporary solution for it already.....
And the boot animation thing is not a big issue.....
And my personal preference is
Min-312 max-1248 gov-lionheart
I/o-sio or cfq....and no random reboots....
Wait for the upcoming stable final version.....
Sent from my GT-S5360 using xda app-developers app
@Sir Anmol Sharma, where is the solution posted, which section??
And, will there be a Stable Version following? I'm waiting for it eagerly
Okay, shall I edit and post it in my post then? A recent post would help the newbies like me and there hasn't been any post about the sloution yet..
And, could you please name the devs who figured out the solution..I will thank them in my post too
Ritayan Roy said:
The users of JellyBlast have faced some problems with Merruk Kernel..I personally have faced these--
1. The Boot-Sound comes first at the Galaxy Y boot-logo..After playing it, comes the Boot-Animation.
2. Random-Reboot issue-Phone reboots 2-3 times a day!
3. Auto-Close and freeze on some browser. e.g.: Opera Mobile.
I increased the RAM with Swap-Partition and increased the Internal Memory with Link2SD and Partition-Problems 2 & 3 were gone-Believe me, my phone didn't at all reboot for 5 days
Another thing, you can try is keep the phone using all the time, i.e. you have to play or browse the phone all the time, press menu and back again..Keep doing it...Or better keep it connected to computer or charger..Before doing the partition procedure I tried these and it worked..The Phone doesn't reboot when it is kept connected to something..Above all, avoid keeping the phone in Deep Sleep
And another, keep the min. Frequency at 832 MHz and max. at 1.248 GHz..Thanks to Sir anmolsharma1293 for helping me!
Try these and reply if it works...
Click to expand...
Click to collapse
how bout battery life ?
@Sir rmhoh, didn't get you, could you please explain Sir?
Ritayan Roy said:
@Sir Anmol Sharma, where is the solution posted, which section??
And, will there be a Stable Version following? I'm waiting for it eagerly
Okay, shall I edit and post it in my post then? A recent post would help the newbies like me and there hasn't been any post about the sloution yet..
And, could you please name the devs who figured out the solution..I will thank them in my post too
Click to expand...
Click to collapse
Yaa final version will b there and it will b very stable....for daily use...
And the solution is to set the freq i.e governer and i/o to lionheart & sio...
We hv not found any patch....its result of experimenting...
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 12:00 PM ---------- Previous post was at 11:59 AM ----------
rmhoh said:
how bout battery life ?
Click to expand...
Click to collapse
Battery life is good....consumes more battery at 1248 mhz....but overall average performance is good....
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
Yaa final version will b there and it will b very stable....for daily use...
And the solution is to set the freq i.e governer and i/o to lionheart & sio...
We hv not found any patch....its result of experimenting...
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 12:00 PM ---------- Previous post was at 11:59 AM ----------
Battery life is good....consumes more battery at 1248 mhz....but overall average performance is good....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
sir please help
i already flash hyperion 7 pre gm
merruk 2.5
the problem is the boot sounds comes first before the boot logo
and busybox bug. i already installed 1.19.3
but in script manager when i ran v6 supercharger
it says busybox 1.17.2 found!
ianice said:
sir please help
i already flash hyperion 7 pre gm
merruk 2.5
the problem is the boot sounds comes first before the boot logo
and busybox bug. i already installed 1.19.3
but in script manager when i ran v6 supercharger
it says busybox 1.17.2 found!
Click to expand...
Click to collapse
thats a bug in MT2.5...
FYI.
do not empty your battery if u have this kernel,, off mode does not charging the battery,,
kimerika said:
thats a bug in MT2.5...
FYI.
do not empty your battery if u have this kernel,, off mode does not charging the battery,,
Click to expand...
Click to collapse
my ram turned 249mb and internal 187mb
and i scored 1467 in antutu
and is it okay to run v6 and kak using 1.17.2 busybox bug
eventhough my busybox installed is 1.19.3?
ianice said:
my ram turned 249mb and internal 187mb
and i scored 1467 in antutu
and is it okay to run v6 and kak using 1.17.2 busybox bug
eventhough my busybox installed is 1.19.3?
Click to expand...
Click to collapse
no need to run v6,,hyper is pre installed in AE4.4 which is much better n my opinion,,
ram&mem=well i do not maybe maroc has the great answer.
kimerika said:
no need to run v6,,hyper is pre installed in AE4.4 which is much better n my opinion,,
ram&mem=well i do not maybe maroc has the great answer.
Click to expand...
Click to collapse
it means we cant fix that boot sounds bug?
my cpu freq is
max 1248
min 312
gov. lionheart
i/o sio
and my score in antutu is 1467 . very low
People your phone still charges when it comes off the charge animation just doesn't show but rest assured your phone is still charging
Phone Slow? go HERE
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 like a freaking BAWS--
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
ianice said:
it means we cant fix that boot sounds bug?
my cpu freq is
max 1248
min 312
gov. lionheart
i/o sio
and my score in antutu is 1467 . very low
Click to expand...
Click to collapse
Benchmarks don't mean anything they never give a accurate representation of what a phone will perform like in real world terms so don't worry about that
Phone Slow? go HERE
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 like a freaking BAWS--
Deleted.
How can i update my busybox
using this
Hyperion 7 pre gem
Merruk 2.5
i install busy box in playstore
my busybox is 1.93.3
but whenever i run the script manager
it says 1.17.2 found!
I just keep my music player running at 0 volume....never let your phone sleep
luciferabby said:
I just keep my music player running at 0 volume....never let your phone sleep
Click to expand...
Click to collapse
LOL
SENT FROM NeMES|S PHO€NiX with MT 2-5 #206©®
Confusing Kernel !!! solution please
I flashed this kernel in my sgy rooted Rom:Jelly Blast V3
the reboot bug was solved by setting scaling and ferq
but Ram (i think 289mb) became 249 mb and internal storage 190 mb became 187mb (doent matter)
dont know what to da ??
Samuel IP said:
I flashed this kernel in my sgy rooted Rom:Nemesis One
the reboot bug was solved by setting scaling and ferq
but Ram (i think 289mb) became 249 mb and internal storage 190 mb became 187mb (doent matter)
dont know what to da ??
Click to expand...
Click to collapse
This is a banned rom,
No further discussions allowed
Sent un Samsung Galaxia S Quatro LTE
Changed my Rom to jbv3
deathnotice01 said:
This is a banned rom,
No further discussions allowed
Sent un Samsung Galaxia S Quatro LTE
Click to expand...
Click to collapse
Sir i flashed jbv3 but the problem still exists.
When u flash merruk's mt2.5 , ur ram and phone memory decreased. Its not the fault of ur rom. Its because of the change from rfs to ext4
Sent from my GT-S5360 using xda premium
i flashed franco kernel r86 and i have camera issue with flash light, i take several shot and my phone happens lag and auto reboot. anyone have same issue?
P/s: sorry about my bad english
Just tried taking a few photos with Flash and there is no Lag nor reboot. Its working properly; could you let us know which ROM you are on?
dhruvmalik said:
Just tried taking a few photos with Flash and there is no Lag nor reboot. Its working properly; could you let us know which ROM you are on?
Click to expand...
Click to collapse
Thank you, i'm on stock rom. I just restore my phone to stock kernel and everything is ok. maybe i undervolt it too much?
Sent from my Nexus 4 using Tapatalk 2
unname333 said:
Thank you, i'm on stock rom. I just restore my phone to stock kernel and everything is ok. maybe i undervolt it too much?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Care with UV, dependind on your CPU binning, I advise to add 25 on each, 1026 is already UV'd by franco, watch out!
unname333 said:
Thank you, i'm on stock rom. I just restore my phone to stock kernel and everything is ok. maybe i undervolt it too much?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Most likely it's the undervolt. Go back to stock voltages and see if you still reboot.
4.2.2 is not as undervolt friendly as 4.2.1.
halluci293 said:
Most likely it's the undervolt. Go back to stock voltages and see if you still reboot.
4.2.2 is not as undervolt friendly as 4.2.1.
Click to expand...
Click to collapse
Stock voltages here: http://forum.xda-developers.com/showthread.php?p=38097229&highlight=stock+voltage#post38097229
You can return to stock voltage by unchecking "Set on boot" on whatever app you use to undervolt and then rebooting. Franco kernel does not UV by default.
Sent by carrier pigeon
can you help me set the values in color control?
I have issues too. Every time i flash a new nightly and reboot my nexus reboots a second time on its own. Its Every time i reboot.
After that the Language is set to English (im german). Also my security pin ist disabeled, and i have to set my apps which are system Administrators.
Can anybody help me?
Sorry for my bad English!!!!!
Gesendet von meinem Nexus 4
hotned said:
I have issues too. Every time i flash a new nightly and reboot my nexus reboots a second time on its own. Its Every time i reboot.
After that the Language is set to English (im german). Also my security pin ist disabeled, and i have to set my apps which are system Administrators.
Can anybody help me?
Sorry for my bad English!!!!!
Gesendet von meinem Nexus 4
Click to expand...
Click to collapse
If you are using an app that controls the kernel I suggest you uncheck your saved settings or uninstall the app and flash the kernel via recovery. The cause of the problem is the voltages been undervolted too much. Bump up the voltage level by +25 or +50 depending on how much you undervolted.
Sent from my Nexus 7 using Tapatalk 2
I have flashed yayakuya jellybread 2.1 ROM but i cant find anywhere in system settings options for kernel to set cpu freq and smartassv2. Where can i find this options ? How can install apk on my SD with this rom ? Can i use Link2sd or some similar software for this ?
mladenlibe said:
I have flashed yayakuya jellybread 2.1 ROM but i cant find anywhere in system settings options for kernel to set cpu freq and smartassv2. Where can i find this options ? How can install apk on my SD with this rom ? Can i use Link2sd or some similar software for this ?
Click to expand...
Click to collapse
settings - performance - cpu
Sabyn said:
settings - performance - cpu
Click to expand...
Click to collapse
But thats what im talking about. there is no performance cpu settings option.
mladenlibe said:
But thats what im talking about. there is no performance cpu settings option.
Click to expand...
Click to collapse
you have developer options? if not, go about phone, and press build number like 10 -13 times
Download an application named : setCPU
and using LINK2SD works ok on this ROM
FOR THIS install app then select the app u want to move then, select to move 2 sd
Sent From ... Lg e400 <-- {[Brasilian Here]}