Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.
I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S
I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?
in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!
the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio
And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !
Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?
Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?
It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL
Ok guys so I could use some help here. I bought a new (used) HD2 yesterday. It is the TMOUS version and I am having every problem I could possibly imagine with it. When I bought it the phone would only boot to the pink T-Mobile screen. It wouldn't go any further than that. I have been able to succesfully able to boot it into the 3 color bootloader screen and am able to flash HSPL using the HSPL4 program. I have successfully flashed both 2.08 and 3.03 HSPL. One time I was even able to flash MAGLDR 1.13 but when it booted into MAGLDR it only showed a black screen with MAGLDR at the top. It didn't give me any options to do anything. I believe that it is because MAGLDR only works with radio 2.15 from what I have read, but I can't seem to get that radio or any other for that matter to flash to the phone. It gets stuck at 96% then I get a connection error. I have no idea what radio it currently has or had as I have done a task 29 a couple of times and it flashes correctly but doesn't change anything. I have tried it on two different computers using 2 different operating systems (XP, WIN7). I have searched until my eyes bleed and done everything I can think of I have been working on this for a little over 12 hours now and I am ready to throw this phone against the wall, so could someone please help me save my sanity and get this thing working or at least tell me that I am SOL and nothing I can do will fix it.
Edit well now I think it is officially bricked. I tried flashing Radio Leo 2.15.50.14 that I got from DFT_LEO70_RELEASE and it stopped at 16%. The recovery wizard came up and I did exactly what it said and now the phone won' reboot into the bootloader or do anything for that matter.
if you get the 3 colour screen then it likely the phone will work, you need to start from scratch
use this thread http://forum.xda-developers.com/showthread.php?t=611433
I would task 29 then instal a stock rom, if that works and it should providing you have not installed an incorrect radio, then consider a custom rom
Have you tried pressing and holdingthe up and down Volume buttons and then press the power button?
The 2.15.50.14 would not normaly brick the phone iirc
time patience and following the instructions is what you need, Good luck
for me something is very strange:
got a phone with broken display; i changed the display and start the phone. noticed that it has spl 1.42.0000, but if i start normally, not in bootloader, got a white screen
installed hspl 2.08.hspl without problems
after that upgraded radio via usb, no errors, radio 2.15
after that installed magldr, no problems
after that task 29 and with hd2 toolkit installed clk
finally installed cwm and now the strange thing happens: tried to put the battery cover and the phone freeze... when restarted got a white screen!....
what happens?
bmilyze lxiv
klinutzu said:
for me something is very strange:
got a phone with broken display; i changed the display and start the phone. noticed that it has spl 1.42.0000, but if i start normally, not in bootloader, got a white screen
installed hspl 2.08.hspl without problems
after that upgraded radio via usb, no errors, radio 2.15
after that installed magldr, no problems
after that task 29 and with hd2 toolkit installed clk
finally installed cwm and now the strange thing happens: tried to put the battery cover and the phone freeze... when restarted got a white screen!....
what happens?
Click to expand...
Click to collapse
sounds like a hardware failure to me . Better, wipe everything and start doin that from all over again, if you could. update hspl, then magloader then install rom. Or better to go stcok windows just to make sure things are working normal.....
tried already, but stock rom don't flash, gives me an error
klinutzu said:
tried already, but stock rom don't flash, gives me an error
Click to expand...
Click to collapse
did you flash from bootloader screen (threecolor screen)?
which error shows?
also try change USB cable and try on different computer.
HI,
I tried to install Android on this phone. I fallowed step-by-step tutorial, installed HSPL 2.08, installed Radio_Leo_2.15.50.14 ROM,installed MAGLDR 1.13 and after that I should get MAGLDR menu, but phone restarted and only shows white screen with green HTC logo. I tried to turn off phone and hold power button to enter MAGLDR, but nothing. A tried with Wipe and then repeat all steps above but still the same. Before on the phone was Windows mobile, but also not working. Can someone guide me how to fix this?
Thanks
You have to wipe the phone with Task29 from bootloader and at 99% of the process hold volume down, boot in bootloader again (4 colors) and then install MAGLDR v1.13. After that the only way to boot in MAGLDR is holding power button when you see Go,Go,Go and should boot into it. Repeat the steps, there is no other way and if not working you do something wrong. Remember to have full battery. Try mine, maybe you are lucky.
eclyptos said:
You have to wipe the phone with Task29 from bootloader and at 99% of the process hold volume down, boot in bootloader again (4 colors) and then install MAGLDR v1.13. After that the only way to boot in MAGLDR is holding power button when you see Go,Go,Go and should boot into it. Repeat the steps, there is no other way and if not working you do something wrong. Remember to have full battery. Try mine, maybe you are lucky.
Click to expand...
Click to collapse
I tried, everything done with "succesfully". After installation of MAGLDR it's not showing GO, GO, GO and not showing RADIO and other stuff written with red color in lower left color, just white screen with green HTC.
Can I use something else then MAGLDR?
drazenmd said:
I tried, everything done with "succesfully". After installation of MAGLDR it's not showing GO, GO, GO and not showing RADIO and other stuff written with red color in lower left color, just white screen with green HTC.
Can I use something else then MAGLDR?
Click to expand...
Click to collapse
No, something wrong there and I telling you, this is the only way. Flash again HSPL4 and Radio, different one like 2.12.50.02_2 even if have nothing to do with the problem. Do you use ToolKit? Don't use that, flash separately all the steps. Take off SD and Sim card from the phone. If you stuck in logo because you do something wrong or the phone it's faulty but I never saw that before.
eclyptos said:
No, something wrong there and I telling you, this is the only way. Flash again HSPL4 and Radio, different one like 2.12.50.02_2 even if have nothing to do with the problem. Do you use ToolKit? Don't use that, flash separately all the steps. Take off SD and Sim card from the phone. If you stuck in logo because you do something wrong or the phone it's faulty but I never saw that before.
Click to expand...
Click to collapse
Is there any problem that in three colors screen on top is written "Security unlocked"? I don't use ToolKit, although I have it. I am doing all separately.
drazenmd said:
Is there any problem that in three colors screen on top is written "Security unlocked"? I don't use ToolKit, although I have it. I am doing all separately.
Click to expand...
Click to collapse
Security Unlocked? Never heard about that and no way this happen on HD2. When you are on bootloader on top should be written the type of the Chip, Cotulla HSPL 2.08 only. Anything else is just weird. It's your HD2 branded?
eclyptos said:
Security Unlocked? Never heard about that and no way this happen on HD2. When you are on bootloader on top should be written the type of the Chip, Cotulla HSPL 2.08 only. Anything else is just weird. It's your HD2 branded?
Click to expand...
Click to collapse
Yes, it' branded. I attached my screen
I tried with different radio rom and then I installed MAGLDR again, but same thing, just white screen with htc logo
drazenmd said:
Yes, it' branded. It's same like in this picture on this topic http://forum.xda-developers.com/showthread.php?t=667798
I tried with different radio rom and then I installed MAGLDR again, but same thing, just white screen with htc logo
Click to expand...
Click to collapse
There is no difference then. On bootloader did you installed and is written CotullaHSPL? How do you installed MAGLDR? In MAGLDR you execute ROMUpdateUtiliy.exe? If you did then you should boot into it. To me the problem is you don't know ow to boot into it. Try keep pushing call button instead of power button but for me MAGLDR is not installed on your phone. I remember well when I installed MAGLDR I don't have to even push power button because it boot automatically. Did you performed Task29? Between this options you making some mistake.
BTW, I worry if your phone is not locked permanently. This kind of job doing the carriers of your phone but on HD2 to me is impossible.
eclyptos said:
There is no difference then. On bootloader did you installed and is written CotullaHSPL? How do you installed MAGLDR? In MAGLDR you execute ROMUpdateUtiliy.exe? If you did then you should boot into it. To me the problem is you don't know ow to boot into it. Try keep pushing call button instead of power button but for me MAGLDR is not installed on your phone. I remember well when I installed MAGLDR I don't have to even push power button because it boot automatically. Did you performed Task29? Between this options you making some mistake.
BTW, I worry if your phone is not locked permanently. This kind of job doing the carriers of your phone but on HD2 to me is impossible.
Click to expand...
Click to collapse
I uploaded image of my screen in above post. It's written CotullaHSPL. I started ROMUpdateUtiliy.exe, and I turned of antivirus and firewall. Every time is "successfully". I done this already on my old HTC HD2, it should boot automaticaly or should show GO, GO, GO screen. It tried with holding power, holding call button, but nothing
drazenmd said:
I uploaded image of my screen in above post. It's written CotullaHSPL. I started ROMUpdateUtiliy.exe, and I turned of antivirus and firewall. Every time is "successfully". I done this already on my old HTC HD2, it should boot automaticaly or should show GO, GO, GO screen. It tried with holding power, holding call button, but nothing
Click to expand...
Click to collapse
This is firs time I see a problem like that on HD2. Try then instal MAGLRD from Toolkit, it's a last chance, should be no difference but maybe toolkit do something magic. If I know something I will let you know.
eclyptos said:
This is firs time I see a problem like that on HD2. Try then instal MAGLRD from Toolkit, it's a last chance, should be no difference but maybe toolkit do something magic. If I know something I will let you know.
Click to expand...
Click to collapse
I tried, nothing
Do have other version of radio that you can upload or links for them? Seems that MAGLDR isn't going to start because of version of radio. I have Radio_2_12_50_02_2 and Radio_Leo_2.15.50.14
drazenmd said:
I tried, nothing
Do have other version of radio that you can upload or links for them? Seems that MAGLDR isn't going to start because of version of radio. I have Radio_2_12_50_02_2 and Radio_Leo_2.15.50.14
Click to expand...
Click to collapse
Hard to believe it won't start because of radio but you can try, here you have all of them http://forum.xda-developers.com/showthread.php?t=611787