I was trying to get clockwork mod working on my blade (G2 with the ZTE Recovery Manager) when I tried to do a factory wipe. I selected the option in the recovery manager and now the phone is stuck in the boot up screen. Please help. The clockwork recovery did not install onto the phone successfully
Try modaco.com
I have an dell xcd 35 (gen2)i downloaded the 2.3 rom of cynogenmod7 and i installed by entering into the clockworkmod recovery V3.0.2.4 and i wondered that it says update complete within 1 min.and when i reboot the phone it displays a logo and it again restarts it doesnt enter and keeps restarting and the same process going on..i backup my old rom (2.2) factory rom.and i again restored by clockworkmod by using back and restore ..it says restore complete but doest boot..it keep restarted and automatically enters into the clockworkmod recovery.?please help me with that..i think i bricked my phone??
have you tryed to download "blade fastboot recovery.zip" Search for:
"How to recover a ZTE Blade/Libra/v880 after a bad flash" hope it helps .
Hi
I installed CM7.1 in my defy and worked good but no market applications.
To install those ui did something in boot loader mode and i think i deleted something and gave reboot dats all but after that my mobile shows only google.
I can able to go in boot mode.But in recovery mode Follwing options availiable;
Latest recovery
Stable recovery
stock recovery
reboot
i tried all
result: no such file found
When entered into stock mode
result:
the recovery gets stuck with the android man and an exclamation mark.
While i put charge it showing questionmark inside the battery logo.
But i can able to enter into boot mode.
But without put charge i cant able to power on:
Please help me out i cant use my phone.
please guys help me.[/B]
closed bootloader s*ck
I would recommend that you read this thread http://forum.xda-developers.com/showthread.php?t=966537 and flash it with a moto stock rom and later root and flash customrom again good luck
Dear All,
I have Idea ZTE Blade (256 MB RAM)
I have rooted it and installed ClockWorkMode Recovery through ROM Manager. Have flashed latest clockworkMod 5.0.2.0 available from ROM Manager for ZTE Blade. It is not showing ClockWorkMod 6.x version for ZTE Blade in ROM Manager. My problem is that when I choose to reboot into recovery for taking backup of current ROM, its gets restarted and gets stuck on green android logo forever.
In short I can't boot Idea ZTE Blade into clockworkmod recovery mode. I want to install 2.3 Ginderbread so that it can run bit smooth faster than current 2.2 version. The phone is properly rooted and CWM has been given access by superuser too.
I also removed battery of blade and reinserted after a while. Then while restarting I hold down power on key+volume down key together. But still its gets stuck on green android logo forever.
I even tried the method of Recovery Manager (2. Through Recovery Manager) posted at --> http://forum.xda-developers.com/showthread.php?t=1713419>
But still same result. its gets stuck on green android logo forever. I cannot go into CWM.
Kindly help me getting out of this stuck position so that I can install custom rom.
http://forum.xda-developers.com/showthread.php?t=1713419
take a look at that mate
matt4321 said:
http://forum.xda-developers.com/showthread.php?t=1713419
take a look at that mate
Click to expand...
Click to collapse
Hi Matt,
I have checked that and from there only I have applied the procedure mentioned in "2. Through Recovery Manager:". But still I am stuck at green Android logo when I press power + volume down key during startup.
I have not yet tried "1 . Through ADB " procedure, as it is more technical, though I understand Linux commands. But I am not very clear about which command prompt mentioned in that procedure. --> "(make sure you're in the command prompt and have changed directory to where the adb file is)". Could you please clarify.
Whether following ADB procedure instead of Recovery Manager procedure would help? If somehow Recovery Manager procedure works, then nothing like it.
Any help is greatly appreciated and thanks in advance.
anantk1965 said:
Hi Matt,
I have checked that and from there only I have applied the procedure mentioned in "2. Through Recovery Manager:". But still I am stuck at green Android logo when I press power + volume down key during startup.
I have not yet tried "1 . Through ADB " procedure, as it is more technical, though I understand Linux commands. But I am not very clear about which command prompt mentioned in that procedure. --> "(make sure you're in the command prompt and have changed directory to where the adb file is)". Could you please clarify.
Whether following ADB procedure instead of Recovery Manager procedure would help? If somehow Recovery Manager procedure works, then nothing like it.
Any help is greatly appreciated and thanks in advance.
Click to expand...
Click to collapse
I got a solution. With home+volume up+power button combination, I am in CWM Recovery screen of Idea Blade!!
Will now install Cutom ROMs and see.
This happened with me too. cwm 5.0.2.0 is a little buggy for blade. so what you can do is:
1. Go to Rom Manager.
2 go down a little bit till u find "All ClockworkMod Recoveries ". click it and flash an older recovery preferably 5.0.1.0.
3.Done!
This happened to me also. Just installed (flashed) older version of CWM and it worked. Then once I got backup then I upgraded CWM.
It was fine.
Sent from my Idea Blade using xda app
udaytalwaronline said:
This happened with me too. cwm 5.0.2.0 is a little buggy for blade. so what you can do is:
1. Go to Rom Manager.
2 go down a little bit till u find "All ClockworkMod Recoveries ". click it and flash an older recovery preferably 5.0.1.0.
3.Done!
Click to expand...
Click to collapse
You can use my 6.0.1.1 it's compatible with gen 1/2/3 and idea blade. It's stable and it is a touch recovery.
Skickat från min Blade via Tapatalk 2
Jinxxed said:
You can use my 6.0.1.1 it's compatible with gen 1/2/3 and idea blade. It's stable and it is a touch recovery.
Skickat från min Blade via Tapatalk 2
Click to expand...
Click to collapse
I tried to root and backup my ROM today using the method given in http:**ideabladesupport.blogspot.in/2012/03/upgrading-idea-blade-to-android-235.html. After pressing 'backup my current ROM' through ROM manager, my phone is not booting and stuck and green screen.
I tried 'power + vol down' or other options given here, but none worked. Its not even opening anything just the green screen.
Please help me if there is some way to save my phone. Any help is appreciated.
anantk1965 said:
I got a solution. With home+volume up+power button combination, I am in CWM Recovery screen of Idea Blade!!
Will now install Cutom ROMs and see.
Click to expand...
Click to collapse
This worked for me too...Thanks much guys :good::good::good:
I already snagged another phone so this isn't a dire emergency "HELP!", but I would like to learn all I can from this mistake, and maybe resurrect the phone.
My VZW G2 is badly bricked. It turns on, shows the LG logo, sits for 20 seconds, then reboots and repeats. I can't get into download mode, recovery, and definitely not normal boot. It doesn't say anything about security boot error or fast boot on the screen before rebooting. So far, I haven't been able to get to a point where the pc will recognize it... not showing up in device manager at all (no Unknown devices)
Here are the newb steps I took to get here:
tot flashed back to vs98010b
Rooted,
Backed up stock recovery
Flashed custom recovery (twrp2.6.3.2 > philzcwm6.19.3 > philzcwm6.19.7)
Took vs98011a ota update (yes, intentionally)
Now I'm in a recovery bootloop, no biggie - I wanted to see what the ota puts where.
Pulled what I wanted
- Now the newb mistakes -
Decided I wanted to do the ota, so I flashed the the stock recovery back... while in recovery
Rebooted - LG logo bootloop
I know flashing stock recovery was my big mistake, but I'd like to know why -
1. does something else need fixed to go back to stock recovery?
2. we can't dd the stock recovery while booted in recovery? (didn't even think about this when doing it since you can flash a recovery zip from recovery, but I guess thats different)
3. the stock recovery img must have been corrupted?
4. something else...
I'm counting this as an expensive lesson, so I would like to learn as much as I can from it.
Try this thread http://forum.xda-developers.com/showthread.php?t=2582142
shaungregg said:
Try this thread http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
I did look at that thread but didn't read thru all 38 pages. I'll go ahead and start reading thru it to see if someone in my spot was helped. Key difference between my scenario and that thread is that I have nothing showing up in device manager - I'm not getting the qhsusb_bulk device in device manager which is crucial for that to work.
I'm hoping someone knows how to force it to some other mode besides download mode and recovery since those don't work.