I have an dell xcd 35 (gen2)i downloaded the 2.3 rom of cynogenmod7 and i installed by entering into the clockworkmod recovery V3.0.2.4 and i wondered that it says update complete within 1 min.and when i reboot the phone it displays a logo and it again restarts it doesnt enter and keeps restarting and the same process going on..i backup my old rom (2.2) factory rom.and i again restored by clockworkmod by using back and restore ..it says restore complete but doest boot..it keep restarted and automatically enters into the clockworkmod recovery.?please help me with that..i think i bricked my phone??
have you tryed to download "blade fastboot recovery.zip" Search for:
"How to recover a ZTE Blade/Libra/v880 after a bad flash" hope it helps .
Related
Basically i desided i would give the Rom manger and Clock Work Recovery a try, So i downloaded the App from the market and installed it then used it to flash the recovery. However now when i try to boot into recovery it just hangs at the Vodafone Screen at boot up.
I tried to reflash RA Recovery however if i do it within the Rom Manager it does the same and hangs when trying to boot to recovery mode. I tried flashing it by the terminal but that did work either.
So does anyone know what i should do!
try flashing via fastboot
how do i use fastboot? when i boot to fast boot the only options i have are
HBoot Mode
Reset device
Restart to HBoot
Power down
OK i tried flashing using fastboot but i got an error 'FAILED (remote: signature verify fail)'
same problem
i got the saame problem as youu!
Damn rom manager killd my recovery , not even the clockwork recovery will boot up! which sucks because now im stuck on superbad 1.3, i want to go back to cynagoen !!!
can you go back to cupcake using the guide below then come back up from scratch
hxxp://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
I have been able to fix my problem hope this helps for you to!
i downloaded Amon_RA's recovery and trying installing using the terminal method. I got memory errors saying i was out of memory etc. so i turned SWAP on with 128mb and then swappyness to 60 an tried again, and this time it worked!
Couldnt be complete luck but i would give it a try if i was you
What worked for me.
I had this same problem. I spent hours and hours trying everything under the sun. This happened to me on Cyanogen 5.0.7 DStest7. I notice a lot of people on the cyanogen forum claiming that's what they use. I purchased the pro version and installed clockwork recovery through the app. I tried a lot of things and they all failed. I tried droid explorer exe to flash the recovery, fastboot method, I tried reflashing clockwork, terminal with and with out memory managers running. Finally, I tried flashing the Amon 1.6.2 recovery 3 times in a row with the clockwork app. I did a reboot every time. The last one took and I uninstalled clockwork. I'll probably never change it.
it has only killed your recovery because you selected the wrong option, you must flash the first option (Ion/MyTouch 3G) this is the version for the vodafone 32B handset
I was also frustrated when i chose the HTC Magic option and it hanging on the red voda splash screen
Hope i helped
please somebody helps me with the recovery as well..
im using motorola milestone..
i rooted my phone using UNIVERSAL ANDROOT.. the rooting went fine... plus flashing the clockwork recovery via rom manager went fine.. but everytime i reboot into recovery the recovery triangle logo just blinks for a second and my phone reboots and comes back normally to the homescreen.. how to ablolish this problem?
Best Regards.
I too am experiencing this problem. Flashed CWM Recovery today, then later flashed amon ra. Got into amon ra and successfully did a nand backup, then left it for a few hours. Just now tried to boot into recovery and got the oem android recovery 2e. Wtf is that about??
yesterday i reflash the rom
form official 1.6~2.2(318)
(before that i had flash the DJ.steve 1.5.2 and official 2.2 )
before i flash 1.6 all is fine , then i flash the 2.2..
i get into the recovery mod(recovery.stock.new.img) and flash
done... and auto reboot....then stuck on dell logo over 20 mins
and i took off the battery , restart hmmm and stuck forever on dell logo
i try to reflash other roms but i just can get into the the mode which choice the
1~4(factory reset.....poweroff) but everytime i choice the recovery mode it just
turn to black screen and stuck
i also try use fastboot to flash other recovery img (Clockwork recovery , Streak
recovery) all is the same...XD
does anyone had solution or method?
I had issues getting into Clockworkmod so I flashed Mistadman's recovery http://forum.xda-developers.com/showthread.php?t=840326 and then had no problems. Just remember that when it boots recovery, you'll get a Dell logo with an exclamation mark inside a triangle. You need to press the power button for the recovery menu to appear.
Failing that, QDL tool could take care of it.
StreakMod Recovery i had tried but is the same..XD
I might not be following your problem clearly...
But if u can boot up... try loading ROM Manager (market)... it looks like that app puts the latest Clockwork on your device with one click.
(I did not load mine this way... but looking at the app that's what it can do).
Sent from my Dell Streak using XDA App
hmm
but i cannot boot up into andriod so....
If you can't boot or get into recovery then QDL is your only option. Follow the steps here:
http://streakdroid.com/?page_id=92
hmm
but before crash i already installed the QDLtool and sucessfully flash steve rom 1.5.2
new system crash i get redo all the step on the page? or i have to flash other data by
fastboot?
i didnt get that XD!
sry
still stuck... cry..
yesterday i reflash the rom
form official 1.6~2.2(318)
(before that i had flash the DJ.steve 1.5.2 and official 2.2 )
before i flash 1.6 all is fine , then i flash the 2.2..
i get into the recovery mod(recovery.stock.new.img) and flash
done... and auto reboot....then stuck on dell logo over 20 mins
and i took off the battery , restart hmmm and stuck forever on dell logo
i try to reflash other roms but i just can get into the the mode which choice the
1~4(factory reset.....poweroff) but everytime i choice the recovery mode it just
turn to black screen and stuck
i also try use fastboot to flash other recovery img (Clockwork recovery , Streak
recovery) all is the same...XD
does anyone had solution or method?
try qdl tool..
you mean qdltool to flash recovery.img or flash other?
i had tried "Clockwork recovery" , "Streak recovery" and "recovery.stock.new.img"
all cannot get into [2]recovery mod ,just black screen ,but i have to said thoes recovery
was work on streak
Not Android Development
Please Post in the correct Forums
Moving to General
Hi,
I have a problem with my i9301i Galaxy S3 Neo...
After buying it (second hand) it has always slow boot up (3-4 min only on this screen: http://imgur.com/P6GYIWm )
I tried to go to Recovery Mode and do Factory Reset and Wipe Cache, but not helped.
In Recovery Mode ,I got this errors: http://imgur.com/e6Jpx6Z
Is this ok?
Any solutions?
Thank you.
TheNerko.
try to reflash stock rom
Sent from my GT-I9301I using xda premium
TheNerko said:
Hi,
I have a problem with my i9301i Galaxy S3 Neo...
After buying it (second hand) it has always slow boot up (3-4 min only on this screen: http://imgur.com/P6GYIWm )
I tried to go to Recovery Mode and do Factory Reset and Wipe Cache, but not helped.
In Recovery Mode ,I got this errors: http://imgur.com/e6Jpx6Z
Is this ok?
Any solutions?
Thank you.
TheNerko.
Click to expand...
Click to collapse
Try Emergency firmware recovery via kies or flash the stock rom via Odin
Flashed Stock Firmware ,downloaded from http://www.sammobile.com/firmwares .
Now, a little bit better situation ,maybe 2 minutes need to start from first screen....
When we look at this video, it need to be 5-7 secs https://youtu.be/bMZPJopaeZY?t=1m
My micromax mobile hangs on the boot logo...how to know whether it is hard brick or soft brick??
vineetxd said:
My micromax mobile hangs on the boot logo...how to know whether it is hard brick or soft brick??
Click to expand...
Click to collapse
Since ur getting the the boot logo it is soft bricked only try to restore the nandroid backup via CWM or TWRP recovery if you have or flash the stock ROM if possible
Press Thanks button if i helped you
Anyway flash a custom recovery and make a backup of everything in case of something goes wrong. I recommend TWRP because you can use it while phone is connected to pc.
Ok..I will flash TWRP, but today I after sucessful boot, on screen appeared red message: "Factory Mode Is ON....", I haven't see whole message, because phone hide message.
I flashed it and phone is dead = Bricked....
EDIT: Not Bricked, it need 15 minutes to start booting!!
How to fix it?
LG L3 e400
was on stock gingerbread rooted ROM...my cousin used it for a while and when he got an update notification he did it..
phone had clockwork recovery then..
now whenever the phone boot , it straight goes to recovery..it won't pass recovery even if I select reboot.. again recovery will come on screen...
tried wiping everything and flash stock and cm9 zips..cm9 fails ..stock install successfully but again it won't pass recovery..tried to get into download mod to use KDZ..but no download mode.. recovery appears..
today I tried to flash twrp..it was successful..but when I flash ROM same happens...
any idea..sorry for my English