Related
Ok so I picked up my Droid X about a month ago and haven't been able to put this thing down, I never thought about rooting it because it did everything I needed/wanted it to do, then one day I log into my car forum and all the OT guys are posting cool print screen's of their phones. I was intrigued, so I rooted my phone and have been trying to figure out a few things but I'm not really up on the terminology and/or logic behind doing certain things. I would greatly appreciate any help in regards to explaining the following:
1) Rooting - Takes off restrictions on the phone so that developer apps can be installed... Is there more to this or is that pretty much it?
2) Flashing - I see this term often but I'm not sure what it is exactly, I tried installing a theme once and the directions said to flash something somewhere and looked at it the same way my dog looks at me while I'm working out at home.. lol
3) ROM - !?
4) apk's - What are they, what do they do, and how do you install them!?
5) Installing themes - I'm thinking has to do with all of the above...
6) Locating and moving downloaded content...
7) How do all of these things tie together? I'm completely clueless as to what does what on the phone and would like to become as knowledgeable as I was when the iPhone first came out and I figured out how to jailbreak/unlock it...
As a reward for your time and effort I leave you Final Fantasy VII fan's with a cool wallpaper I found at work today.. Thanks for any/all input and again, your time is most appreciated!!
Initial GT3 said:
Ok so I picked up my Droid X about a month ago and haven't been able to put this thing down, I never thought about rooting it because it did everything I needed/wanted it to do, then one day I log into my car forum and all the OT guys are posting cool print screen's of their phones. I was intrigued, so I rooted my phone and have been trying to figure out a few things but I'm not really up on the terminology and/or logic behind doing certain things. I would greatly appreciate any help in regards to explaining the following:
1) Rooting - Takes off restrictions on the phone so that developer apps can be installed... Is there more to this or is that pretty much it?
2) Flashing - I see this term often but I'm not sure what it is exactly, I tried installing a theme once and the directions said to flash something somewhere and looked at it the same way my dog looks at me while I'm working out at home.. lol
3) ROM - !?
4) apk's - What are they, what do they do, and how do you install them!?
5) Installing themes - I'm thinking has to do with all of the above...
6) Locating and moving downloaded content...
7) How do all of these things tie together? I'm completely clueless as to what does what on the phone and would like to become as knowledgeable as I was when the iPhone first came out and I figured out how to jailbreak/unlock it...
As a reward for your time and effort I leave you Final Fantasy VII fan's with a cool wallpaper I found at work today.. Thanks for any/all input and again, your time is most appreciated!!
Click to expand...
Click to collapse
First off- that is a lot to bite off as an opener. lol. I have to get in a minute- plus I am a newb as well but here a couple of things...
1) You sound pretty on track. Root gives you access to more options with your phone. It also voids your warranty.
2) Flashing. A term used loosely. Normally it is used in conjunction with "flashing a rom". It simply means to install something (basically).
3) Rom. It is the image (not in the photo-graphical sense) that is embedded/burned on your phones hard drive with all the information of your operating system. For instance: you are on the stock 2.2 ota "rom". But you could "flash" the new "AOSP rom" that was just released. That means you would be removing the factory image that came on your phone and replacing it with a modified image. Theme's and .apk's -those are not "burned" into the phone. If you do a factory reset- those will be wiped. The rom image stays put. If you flash from 2.2 ota to AOSP and then did a factory reset- you would not return to the original state your phone came from Motorola bc that image is completely removed and replaced by the new image you flash. Instead you would return to a clean AOSP.
4) .apk's - .apk is simply the name of the file extension used for android applications. I came from Windows Mobile and they were called .cabs. So any app can be referred to as an .apk. You can download an apk from XDA, place it on your sdcard, tap the file, and i think you will be prompted with "do you want to install" (some where along those lines). There is a setting in the "Settings" that allows you to install 3rd party (non-market) .apk's.
5)Installing themes. This refers to modifying the images (and this time I do mean in the graphic sense) of certain .apk's and other whatchamajiggies. You can install a simple theme that just changes your lockscreen, or you can install a huge theme that changes almost every part of every image so the entire phone looks similar. Here is the tricky part about using themes- your phone has to be deodexed.
deodexed. When you get your phone all of the system files come with a few different parts to them. One of those parts is an odexed file. Apparently the theme building types do not like working with these files so they run this process called de-odexing in which all of the system files are somehow manipulated in a way where they no longer need their odex file. So you end up "de-odexed". There is a program called "xultimate 2.2" that enables regular folk like you and me to deodex our phones. I tried running it yesterday and it errored out on me. So I used another method that worked fine. There are some threads on here about deodexing- if you want themes you will have to do it.
6) locating and moving downloaded content. When you have root you can get Root Explorer from the market. I am sure there are other good file exploreres- but I can't speak to them- I use Root Explorer. As far as locating downloaded content- whenever I download something from my phone, it always (normally) goes to /sdcard/downloads. If it is not there, I guess you just do a search for it. If you want to move it- long press the item, copy, move.
And you will need to google "ADB" (android device bridge). Many of these activities will require the use of ADB. You plug in your phone through USB (make sure phone settings are set to "USB debugging") and... well there is just way to much on this one. Google this one and you will find a lot of stuff- or search it here on XDA
have a great weekend. got to go.
Regarding this page:
http://forum.xda-developers.com/showthread.php?t=991072
(Guide) Flash SBF to Motorola Atrix 4G
I was hoping to get some help.
I have an unrooted Atrix. It's my first Android phone. I already installed the latest update, 1.5.7, when it came out.
I'd like to roo the phone, but according to the above link I have to flash back to 1.2.6. I think I can handle the rooting process, but the flashing to the prior build is what I'm confused on how to do.
Am I understanding this correctly?:
1. I download the 1.2.6 file. Question: (What is the 1.5.2 file?)
2. Download the RSDLite 5 and install it.
3. I have a Windows Vista 32 bit system, so install the
32 bit file since I'm not rooted.
4. Then follow the instructions...turn off phone, ect..
5. On Step 7... Load up the SBF file, that would be the 1.2.6 file correct? I'm asking because I don't know what that 1.5.2 file mentioned earlier is. Does it matter where this file is extracted to on my computer?
After this is all done then do I I go to this page
[SCRIPT] GladRoot v4.2 (Bell 0.37.4, AT&T 1.26/1.52/1.57 Supported - Now w/ UnRoot) and do the first set of instructions?
Sorry for all the questions. I'm new to this and don't want to brick the phone. I really want that Titanium Backup program so I can backup and freeze some things.
Thank you
Don
I had the 1.5.7 update without root and a few days ago I did the same thing.
1. I download the 1.2.6 file. Question: (What is the 1.5.2 file?).
just get the 1.2.6 file
2. Download the RSDLite 5 and install it.
yes
3. I have a Windows Vista 32 bit system, so install the
32 bit file since I'm not rooted.
yes
4. Then follow the instructions...turn off phone, ect..
yes
5. On Step 7... Load up the SBF file, that would be the 1.2.6 file correct?
yes
I'm asking because I don't know what that 1.5.2 file mentioned earlier is. Does it matter where this file is extracted to on my computer?
no
After this is all done then do I I go to this page
[SCRIPT] GladRoot v4.2 (Bell 0.37.4, AT&T 1.26/1.52/1.57 Supported - Now w/ UnRoot) and do the first set of instructions?
if you have AT&T yes. Extract it so that it's C:\GladRootv4.2. When you run gladroot.bat be sure to answer yes to the question "Are you updating an AT&T Atrix on 1.26 to 1.57? [y/n]"
I got the adb "Unable to detect device" error whenever I ran the scripts. Just run the command adb services in a command prompt (You should see a device name as output) while in the C:\GladRootv4.2 directory for your computer to detect your phone properly and then run the script.
It's fairly painless, the SBF flash can take a while, 15-20 minutes or so. You will lose nearly everything that's on the phone, so save what you want to keep. I did notice the ringtones that I saved onto the phone (not on the sd card) were still there.
Root explorer is more interesting IMO.
Cheaper than TB.
Just need to rename apk bay adding a .bak to freeze them.
Thanks for the quick replies. These forums are great!!
One last question. Once rooted, if Motorola comes out with future updates, will this process need to be repeated for each update?
Thanks again.
Don
Shaydar said:
Root explorer is more interesting IMO.
Cheaper than TB.
Just need to rename apk bay adding a .bak to freeze them.
Click to expand...
Click to collapse
i'd rather pay for few bucks for TB to have a quick and easy "freeze"/"unfreeze" button than to keep going in and manually renaming apks.
plus you can do all the root exploring and file managing that you want for FREE with super manager (in market).
dwaded said:
Thanks for the quick replies. These forums are great!!
One last question. Once rooted, if Motorola comes out with future updates, will this process need to be repeated for each update?
Thanks again.
Don
Click to expand...
Click to collapse
Not sure, it depends how devs here on xda manage to root a future build. If the approach is the same as what is available now (preserve root in current build, update, restore root) you will not need to do the flash, lose everything etc. only if you run gladroot.bat prior to the official update. If you install the official update without running gladroot.bat then you'll have to go through the fun that is SBF flash.
I have a question about this as well, so I thought I'd ask here instead of a new thread...but at the drivers section of the instructions, it says just download them but if I've rooted my phone I should already have them. But if I've connected my phone to my computer by USB before just to transfer files, even if I haven't rooted, should I already have the right drivers?
thebeardedchild said:
I have a question about this as well, so I thought I'd ask here instead of a new thread...but at the drivers section of the instructions, it says just download them but if I've rooted my phone I should already have them. But if I've connected my phone to my computer by USB before just to transfer files, even if I haven't rooted, should I already have the right drivers?
Click to expand...
Click to collapse
Maybe. I would just install the specified drivers listed just to be safe. It's not a very large install file.
gnahc79 said:
Maybe. I would just install the specified drivers listed just to be safe. It's not a very large install file.
Click to expand...
Click to collapse
Alright, fair enough! Thanks for the help!
EDIT: Actually one more question. Does flashing the original SBF clear my phone? If it does, how can I backup everything on there if I'm currently unrooted? (I'm flashing this so that I CAN root later on). I'm not too worried about this I guess but I should be prepared anyway...
I just managed to root my SCH i400 (first ever rooting of any Android device for me).
I am very surprised by how smoothly it went, despite reports & warnings everywhere about complications (like this one - which should be totally ignored if you're using SuperOneClick v2.1.1 or higher).
For the benefit of n00bs like me who may be confused by multiple sources, resources, versions and problem reports, I am posting a step by step procedure that is confirmed (by me, on Windows XP SP3) to be working smoothly, without a single hitch of complications:
Phone: Make sure setting > applications > unknown sources is checked.
Phone: Make sure phone is in debugging mode.
Phone: Make sure SD card is unmounted!
PC: Make sure Windows USB driver for this phone installed and works
PC: Make sure .NET 3.51 SP1 is installed.
PC: Unzip SuperOneClickv2.1.1-ShortFuse.zip ==> C:\Program Files\SuperOneClickv2.1.1-ShortFuse
PC: Double-click SuperOneClick.exe
PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
PC (in SuperOneClick): Now click the root button and wait for the process to complete.
PC (in SuperOneClick): "BusyBox not found. Would you like to install it?" Yes!
PC (in SuperOneClick): "Root install has completed! Would you like to run a test?" Yes!
PC (in SuperOneClick): "Your device has been rooted! Would you like to donate now?"
Exit SuperOneClick, unplug phone from USB, power down phone, power on phone. -- this step might not be mandatory, I just did it to be on the safe side.
Enjoy!
Great job on this tut.
Sent from my SCH-I400 using xda premium
Nice...
I may have to sneak my wife away from her for a bit....
Sent from my DROID using XDA App
Froyo is so nice... Here's how...
Hey guys... new poster here.
Just got a (Gently used) Samsung Continuum for free from Verizon after the power button on my G Droid 1 broke.
Anyways, after rcving it and realizing that it would only support Android 2.1 - I was slightly upset.
My D1 was rooted and modded to the max many times over with just about every ROM you can get.
So after reading up about IMNUTS leaking the Froyo download for the Continuum, my hopes were raised.
It is now debinged, debloated, lightening quick and amazing!
There may not be ROMS out there yet - but I truly hope some of you geniuses decide to make a few.
Just wanted to say thanks and encourage you to do some research before rooting it.
Here's what worked for me.
Odin 1.3
Continuum PIT.pit file
froyo_modem.tar.md5
cwm_recovery_test4_adryn.tar
cyan Clockwork Mod Recovery (BLUE, not yellow) (update.zip file, which is placed on the root of your SD card - renamed to update.zip)
stock_deodexed_ec03.zip (ROM)
(Place all of these files on your Desktop for easy access)
How to do it...
1. Connect your phone to your computer and Mount it.
2. Place the cyan CWM Recovery zip file to your SD card. (rename it to update.zip & do not put it in any folders. Just drag the file to your SD card - whatever drive it is listed as. Mine is my Removeable F
3. Make a new folder on your SD card. Name it whatever you want. (Mine is named "Froyo") Place the stock_deodexed_ec03.zip file in the folder on your SD card.
4. Open Odin 1.3 on your PC.
5. While your phone is off... hold the down volume button and connect it to your computer via USB. The yellow triangle will appear and it will say "Downloading". (Some people say to take the battery out, but my Odin program would not recognize my phone without the battery. Whichever works for you is fine.)
6. In Odin - Click the PIT file button. Load the Continuum.Pit.pit file into the file field. (Just double click it once you find the file from your Desktop.)
7. In Odin - Click the PDA button. Load the froyo_modem.tar.md5 file into the file field. (same as #6. Just double click it once you find the file from your Desktop.)
8. Click Start in Odin.
It should think for a minute, then say resetting, then say PASS
Then your phone will probably turn back on - turn it off again and reconnect it to your PC in download mode as stated in #5 above.
9. In Odin - Click the PDA button again. Load the cwm_recovery_test4_adryn.tar file as you did in #'s 6 and 7 above.
10. Click Start again in Odin... same as before. (thinking, resetting and PASS)
Your phone will turn on again.
11. Disconnect your phone from the computer & turn it off.
12. Hold both Volume buttons and turn it on. It will boot into the Samsung Recovery mode.
13. Use your Volume buttons to go down to highlight "apply update.zip" Then find the place where your normal Menu softkey would be and push it. The phone should then reboot into Clockwork Mod Recovery. It will be orangish.
14. In CWM, use the Volume buttons to highlight Backup/ Restore. Use the Power Button to choose it. Then at the next field, highlight Backup and make a backup.
15. After is makes the backup, press where the softkey Back button should be to go back to the original screen. From there, do a Wipe Data/ Factory reset. Do not forget to do this part.
16. Once it does the Data Wipe - go back to the main menu and and highlight & select the "zip from SD card" choice. Find your "Froyo" folder (of whatever you named it) and apply the stock_deodexed_ec03.zip file.
17. After that, go back to the main menu again and reboot your phone.
It may take a while, but your phone should restart in Froyo.
Of course, you have to re-sign in to your Google network...
Thanks so much guys for all the posts. Without them, is nowhere near as cool.
Hanging at Step #5, Now what?
Thank you for sharing. Wish I could say it went as smoothly for me with my SCH-I400 Continuum... I'm still working on it! I followed recommendations of several different developers/rooters. I've installed .Net Framework 4.0 and the SDK developers kit (who knows, maybe I'll start a new hobby...), and now when I run Superoneclick it hangs at step #5 with this message:
link_image[1728]: 3252 could not load needed library 'libdiskconfig.so' for './zergRush' (load_library[1058]: Library 'libdiskconfig.so' not found)CANNOT LINK EXECUTABLE
I have rebooted the computer and the phone, unmounted the SD card, settings to allow unknown sources, and turned on USB debugging. I'm not sure why the config file can't be found, and I don't know where to get it...
Do I need to reinstall the SDK? Or install the additional Java developers software? Or am I over-complicating this whole thing?
Any ideas will be greatly appreciated...
-James
Perhaps the easiest way is to flash a rooted ROM through Odin (or Heimdall)... Especially if you don't use Windows. This is how I did it:
http://forum.xda-developers.com/showthread.php?t=1203597
Two topics in one thread?
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
bighigmt said:
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
Click to expand...
Click to collapse
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Txwolf1980 said:
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Click to expand...
Click to collapse
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
bighigmt said:
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
Click to expand...
Click to collapse
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Come on now...
ciscogee said:
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
I spent 6 hours last night troubleshooting, researching, digging deep, and "using that little search box." Seems to me You guys need to "just read the thread." It's about rooting your phone, period. If a forum is out there, I've probably read it. I'm using superoneclick to do it. SDK is installed. Net framework is installed. My error message frome SOC is above. When I am finally rooted, THEN I will install several programs - starting with a wifi tether.
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
bighigmt said:
...Seems to me You guys need to "just read the thread."...
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
Click to expand...
Click to collapse
well i did read the thread...
ive been out of town for a week and finally back on my pc... i would love to help you yet more info is needed.
you are running dl17 stock 2.1 correct?
what OS is your pc running?
and yes i have same phone as you. i have used superone click on ec03 build once.
just for root. but then flashed a deodexed rom to use custom mods and apps.
and since have been flashing rooted kernels, imnuts and adrynalynne have released most all of them.
there are a few ways to root the device, best bet is, as always is go to IRC.
clarity and patience are key, we all got to practice both
I rooted EC09 with soc no problem. If I send someone the EC09 could they extract the apks and send them to me? I deleted some sys apps for the ticker and rss feeds and need them back now to use it.
Sent from my SCH-I400 using xda premium
Unzip factory.rfs of ec09 to grab missing apks and put them on sdcard and install from there.
Sent from my SPH-M580BST using Tapatalk 2
verizonless said:
[*]PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
Click to expand...
Click to collapse
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
verizonless said:
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
Click to expand...
Click to collapse
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
trailblazer101 said:
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
Click to expand...
Click to collapse
Im assuming by now everyone is on EG04 Gingerbread?
Hello, ladies and lads!
Here's a short version of where I'm at: after installing Wondershare' s dr.phone Recovery on my mom's PC and using it on her phone:
its screen won't respond to touch (can't enter SIM card's PIN nor open screen lock)
the On/Off button won't turn off the phone on long press (maybe due to screen lock)
on restart there's a yellow text that reads "Set Warranty Bit : kernel"
the physical buttons still work
I can see the phone's files and folders only through PC's command prompt, using ADB ('This PC\Galaxy Grand Prime' folder in Win Explorer says it's empty).
Ideally I want to keep her data (FB Messenger, Skype, Chrome, WiFi passwords, etc), and her phone to function again. What do you think I should do?
I think I need an advice and suggestions from someone more experienced than me - I don't even know trusted sites where to download the firmware roms from.
The phone's details are (I'm afraid you'll have to walk me through to get more details to this list, as I'm new to the forum):
Phone: Samsung Grand Prime
Model name: SM-G530FZ
Firmware version: G530FZXXS1BQC2 (Android 5.0.2 with Baltic bloatware, I guess)
Now in detail:
My knowledge and experience regarding the smartphone software & restoration is very basic (I've only restored the firmware to a LG-L70 once some years ago, and that's it).
Before the problem I lost some over 600 media files from that phone by Cutting and Pasting a folder from phone's internal SD to PC's disc. Now I learned never to Cut-Paste important or irreplaceable files. The files ended up on the phone, because a folder with over 800 files couldn't be uploaded to the Google Drive (the camera's folder had over 1k files in it, so I moved some of them to another folder, which the phone created on the internal partition rather than the SD Card, where the original folder was from).
Instead of using a trusted software, I foolishly Googled a photo recovery program for phones, using my mom's PC. A list of bogus recovery program sites appeared (had to look them up on her PC, as I found only legit, widely trusted programs now, using my laptop. Those darn Google's personalized search result algorithms!).
Before using the dr.fone Recovery software I synced most of the data to her account.
Used the "free" dr.fone Recovery software as per its site's instructions, the phone did a restart and the touchscreen went unresponsive to touch. Later the software showed the lost files it found, and offered to restore them for a sum. Naturally I declined.
The software said that to return the phone to normal I need to disconnect the USB cable. I did so, but the phone's screen remained unresponsive to touch, even after restart (long-press [Pow] + [Vol-]).
I tried connecting an USB mouse via the dongle, but the mouse cursor didn't appear (maybe this phone doesn't have this functionality).
Now, after using that FAIL-covery program, I was overly cautious not to make things even worse.
I wanted to make a copy of the phone's internal SD state (or is it called a phone's hard drive?), to get the media files from the clone and to have a backup of mom's files.
But I failed: I downloaded APK, ncat, KingoRoot and BusyBox. Tried to follow the steps in this video: youtu[dot]be/KKkvkCgMeMA. Got stuck at "busybox not found" at about 10:27 mark in that video ("dd if=/dev/block/mmcblk0" "busybox nc -l -p 8888"). Turns out you need to run some of the apps from that phone prior to that step, and I don't know any workarounds.
Then I remembered that the files were on the external SD in the first place. Well duh! I then connected the Micro SD card to PC's reader via a Micro SD adapter. To make a copy of the SD card's 1s & 0s, and to restore the media files from said copy I used ZAR (Zero Assumption Recovery) z-a-recovery[dot]com/. The backup creation (an .ISO file or some such) and media recovery are free of charge.
Now I only need to remove duplicates and blurry pics (I think I had a Moleskinsoft's Clone Remover from an old PC magazine's CD lying around somewhere for the latter). Oh, and I better not forget to run a malware scanner on her PC and remove the mr.fone installed services and folders from it. Went a bit off-topic here, sorry!
Last I pulled a wifi passwords file with "adb pull /data/misc/wifi/wpa_supplicant.conf" command as per instructions on this page: mashtips[dot]com/see-wifi-password-android/. I don't know whether putting the file back on that phone will do the trick or not.
That's pretty much all.
I hope the situation can be resolved and I appreciate your input! :fingers-crossed: Maybe someone has come across a similar post, has constructive commentary or knows something obvious that I haven't come up with? Thank you in advance!
Edit 30 Jan '19: Got the phone working. Accessed the phone with a Chrome browser extension (name here). All accounts except some mail account were gone. WiFi didn't work.
Found a stock ROM here: (address here).
Found the Odin3 tool here: (address here). It came with a different locale ROM.
Flashed the 1st ROM with Odin. The screen started to work.
Flashed the 1st ROM with Odin again. The WiFi started working.
I'll update this with links soon.
I've got the exact same problem after using Dr Fone app!
Hi there.
I've got the same problem with my Samsung Galaxy Grand Prime after using Dr Fone, like you. I contacted Wondershare website from which I downloaded the app but they haven't bothered replying. Not happy at all!!
I contacted Samsung's support team and after trying different things (the usual stuff: reboot; remove the battery and SIM card; restart in Safe Mode; etc) which didn't solve the problem, they ended up telling me to reset the phone to the factory settings but that didn't work either.
Now my phone is stuck on the Samsung Galaxy Welcome screen which asks me to choose the language I want on my phone. The touchscreen is still unresponsive.
How did you manage to fix the problem if the touchscreen was unresponsive?
Thanks in advance for your help!
Your-Mum said:
Hello, ladies and lads!
Here's a short version of where I'm at: after installing Wondershare' s dr.phone Recovery on my mom's PC and using it on her phone:
its screen won't respond to touch (can't enter SIM card's PIN nor open screen lock)
the On/Off button won't turn off the phone on long press (maybe due to screen lock)
on restart there's a yellow text that reads "Set Warranty Bit : kernel"
the physical buttons still work
I can see the phone's files and folders only through PC's command prompt, using ADB ('This PC\Galaxy Grand Prime' folder in Win Explorer says it's empty).
Ideally I want to keep her data (FB Messenger, Skype, Chrome, WiFi passwords, etc), and her phone to function again. What do you think I should do?
I think I need an advice and suggestions from someone more experienced than me - I don't even know trusted sites where to download the firmware roms from.
The phone's details are (I'm afraid you'll have to walk me through to get more details to this list, as I'm new to the forum):
Phone: Samsung Grand Prime
Model name: SM-G530FZ
Firmware version: G530FZXXS1BQC2 (Android 5.0.2 with Baltic bloatware, I guess)
Now in detail:
My knowledge and experience regarding the smartphone software & restoration is very basic (I've only restored the firmware to a LG-L70 once some years ago, and that's it).
Before the problem I lost some over 600 media files from that phone by Cutting and Pasting a folder from phone's internal SD to PC's disc. Now I learned never to Cut-Paste important or irreplaceable files. The files ended up on the phone, because a folder with over 800 files couldn't be uploaded to the Google Drive (the camera's folder had over 1k files in it, so I moved some of them to another folder, which the phone created on the internal partition rather than the SD Card, where the original folder was from).
Instead of using a trusted software, I foolishly Googled a photo recovery program for phones, using my mom's PC. A list of bogus recovery program sites appeared (had to look them up on her PC, as I found only legit, widely trusted programs now, using my laptop. Those darn Google's personalized search result algorithms!).
Before using the dr.fone Recovery software I synced most of the data to her account.
Used the "free" dr.fone Recovery software as per its site's instructions, the phone did a restart and the touchscreen went unresponsive to touch. Later the software showed the lost files it found, and offered to restore them for a sum. Naturally I declined.
The software said that to return the phone to normal I need to disconnect the USB cable. I did so, but the phone's screen remained unresponsive to touch, even after restart (long-press [Pow] + [Vol-]).
I tried connecting an USB mouse via the dongle, but the mouse cursor didn't appear (maybe this phone doesn't have this functionality).
Now, after using that FAIL-covery program, I was overly cautious not to make things even worse.
I wanted to make a copy of the phone's internal SD state (or is it called a phone's hard drive?), to get the media files from the clone and to have a backup of mom's files.
But I failed: I downloaded APK, ncat, KingoRoot and BusyBox. Tried to follow the steps in this video: youtu[dot]be/KKkvkCgMeMA. Got stuck at "busybox not found" at about 10:27 mark in that video ("dd if=/dev/block/mmcblk0" "busybox nc -l -p 8888"). Turns out you need to run some of the apps from that phone prior to that step, and I don't know any workarounds.
Then I remembered that the files were on the external SD in the first place. Well duh! I then connected the Micro SD card to PC's reader via a Micro SD adapter. To make a copy of the SD card's 1s & 0s, and to restore the media files from said copy I used ZAR (Zero Assumption Recovery) z-a-recovery[dot]com/. The backup creation (an .ISO file or some such) and media recovery are free of charge.
Now I only need to remove duplicates and blurry pics (I think I had a Moleskinsoft's Clone Remover from an old PC magazine's CD lying around somewhere for the latter). Oh, and I better not forget to run a malware scanner on her PC and remove the mr.fone installed services and folders from it. Went a bit off-topic here, sorry!
Last I pulled a wifi passwords file with "adb pull /data/misc/wifi/wpa_supplicant.conf" command as per instructions on this page: mashtips[dot]com/see-wifi-password-android/. I don't know whether putting the file back on that phone will do the trick or not.
That's pretty much all.
I hope the situation can be resolved and I appreciate your input! :fingers-crossed: Maybe someone has come across a similar post, has constructive commentary or knows something obvious that I haven't come up with? Thank you in advance!
Edit 30 Jan '19: Got the phone working. Accessed the phone with a Chrome browser extension (name here). All accounts except some mail account were gone. WiFi didn't work.
Found a stock ROM here: (address here).
Found the Odin3 tool here: (address here). It came with a different locale ROM.
Flashed the 1st ROM with Odin. The screen started to work.
Flashed the 1st ROM with Odin again. The WiFi started working.
I'll update this with links soon.
Click to expand...
Click to collapse
Like the subject says I am having a few problems.
I have a Lumia 950 XL, which I have just acquired.
My first problem is that I have no problem sideloading apps, but if I try to install too many I get this message "unable to install application. the maximum number of deveiloper applications on this phone has been reached. please uninstall a developer application or try again". I think it is letting me install about 10, but won't let me install anymore.
Ok My second problem is that I followed this tutorial on youtube, which I thought might fix my first problem
Seemed like a good tutorial but I had a couple of problems.
I installed Windows Universtal Toll (WUT). CMD Injector and Interop Tools (RC)
The problem was that the CMD Injector just shuts down when I click 'Inject'
Also in the Interop tools I can't turn on Inerop/Cap unlock or New Capability Engine Unlock. It just turns on again.
I hope someone can help me with these problems.
The first problem is the most annoying as I have tons of XAP files I would like to install
regards
Asimov
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Asimov500 said:
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Click to expand...
Click to collapse
Ok I did a complete reset, so the phone is back to square one. Gonna redo the above tutorial before copying everything back to the phone.
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Asimov500 said:
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Click to expand...
Click to collapse
Perhaps that's because along with the WUT you get a valid certificate (e.g. WUT_1.4.11.0_x64.cer) , which is missing from the phone.