Related
TGA_Gunnman created a one click root that new users will want to use, said thread is a sticky in Captivate Development. If you still want to use the old method (and install ADB) please use this one.
I followed my own guide! This works perfectly if you read everything and follow the instructions.
Also: once you are rooted, be EXTREMELY careful! Half of the new threads are people who have screwed up their phones by deleting this or corrupting that. Please, for the sanity of all of the devs and Android veterans, make backups and just be all around careful. Almost all problems that anyone has had are repareable AND PREVENTABLE with a little reading and care. Just to clarify, rooting does not automatically enable sideloading. Please follow http://forum.xda-developers.com/showthread.php?t=738376 to enable sideloading.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way. Your warranty is also void, but you could have figured that out for yourself.
Now that that's over with, lets get to the fun bit. If you are on Windows, you can follow this procedure, or for TGA_Gunnman's one click root program (only on Windows), you can go ahead and skip to the bottom.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/s...iver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. (If you are on a Mac, DO NOT USE SAFARI to download the file, it automatically unzips any zip file. Use Google Chrome or firefox instead.) Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) EDIT--There is an easier way to get to recovery, but do this step anyway. Turn the phone off, then hold power, volume up and volume down. If you still want the android SDK (which will be very useful throughout your rooted experiences) follow the old procedure:
This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
Click to expand...
Click to collapse
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43
Can we please have more detailed instructions? I don't understand the part where it says "type in the terminal"
I am very new to android as this will be my first Android phone.
Also, after rooting will we be able to install 3rd party applications? Or do we have to do anything else to bypass ATT's restrictions?
adb terminal is software you need to install on your PC , will probably need samsung drivers also , guide is indeed not noob friendly. This will help you get needed bits including ADB
Probably None of us have captivate , so writing a guide is a bit troublesome
Ditto, a guide to the adb terminal please! I will acquire this phone, this Sunday.
Actually, you'd have to install a custom ROM for that. MoDaCo should be coming out with them pretty soon, and so will XDA. It won't be too long. BTW, once you have ADB installed on your computer, you can sideload apps all you want. The command is
Code:
adb install /directory/of/app/on/computer
point me to some functioning samsung drivers and I can do this!
If you cant get it to work on windows, try a ubuntu live cd. All you need to do is go to ubuntu and burn a disc and reboot.
Are there no Windows 64 bit drivers?
Edit- I found some that work. I think. Haven't tried it (yet).
http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Edit 2- Just did the root. Seems to have worked (no errors) but how do I know if it did? How do I delete say, ATT Maps?
Thanks for this. I am new to smartphones and plan on purchasing the Samsung Galaxy-S, but don't want to mess it up. I am new to editing the OS of any smartphone, but I think if I have a tutorial I will be fine
For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)
NOSintake said:
For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)
Click to expand...
Click to collapse
if you are in the directory above yes. the ./ just saves you from writing out the full path
lets say adb is in "/home/user/Downloads/sdk/tools"
you could type out "/home/user/Downloads/sdk/tools/adb command" regardless of where your terminal window was focused
or if you were currently in the directory "/home/user/Downloads/sdk/tools"
you could use the shortcut "./adb command"
OP I'd change your post based on my experiences... Here's a little more detail and I've rearranged it (you need the drivers before running these commands, for example).
blackjackboy said:
Please let me know if this rooting method works as I have no Captivate to test on. I'm not taking any credit for any of these files, LeshaK made the original file to root the European Galaxy S, Justadude modified it for the T-Mobile Vibrant and chaoscentral edited the file for use on the Captivate.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way.
Now that that's over with, lets get to the fun bit.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
Thank you to LeshaK, Justadude, and chaoscentral. Once again, I didn't discover how to root, that credit goes to LeshaK, bringing it over to the USA was Justadude's doing, and chaoscentral edited the file for use on our Captivates.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43
Click to expand...
Click to collapse
Ubuntu 10.04 - adb
Any step by step instructions just to get adb running enough on 10.04 to root and side load software? I'm getting command not found when I try to run adb, even after downloading packages.
Hi,
Did this thread worked well to Root the Captivate or anyother suggested link? I'll appreciate any help.
Thanks
rerooting captivate
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!
Thanks for the answer & More Queston
cellgeek said:
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!
Click to expand...
Click to collapse
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again
Muhamadabdelaall said:
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again
Click to expand...
Click to collapse
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.
Thanks Drachen
Drachen said:
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.
Click to expand...
Click to collapse
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks
Muhamadabdelaall said:
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks
Click to expand...
Click to collapse
The ATT stuff doesn't actually run so they aren't a big deal at this point. I also don't see Amazon MP3 background stuff like some Android devices have, so... There's really not a huge case for rooting yet.
That said, when Custom ROMs for this come out I'll still be getting one.
For those of you having a hard time installing ADB Shell, try this video. It worked for me.
http://www.youtube.com/watch?v=YeWH6Bj1DYw&feature=related
Hi, i have been looking through some of the rooting, flash threads on here and there is a bit too much information,lol.
Can anyone detail the basic steps, software required to roll my X10 back to the 1.6 OS?
I am still having connectivity issues when trying to use the handset in the car.
The vehicle manufactures website shows that the Xperia X10i is compatible with their factory fitted handsfree systems, but only on OS 1.6.
1. Download this and extract in any folder of your computer:megaupload.com/?d=HCWX4KO3 (The credits of this goes for its creators)
2. Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close. (This is the same as the one used on the flashtools of Bin4ry)
This is how you can get your DeviceID on Windows: (Again thanks tojimbo77)
2.1: Connect your phone to the computer on the USB port you are going to use to flash it.
2.2: Press start (or windows icon) and in the run box type regedit
2.3: Click edit>find, and type in Vid_0fce&Pid_adde. You should find "DeviceInstance". If that fails, make sure Match whole stringis un-ticked, and click find next or press f3, if that fails, tryUSB\VID_0FCE&PID_ADDE. Copy the last section of that, it should look something like "5&2888d0ff&0&1".
Note: It changes with every diffrent USB port you use....3. Download your Firmware, extract it and copy all the files on it to the 1_firmware folder. You don't have to erase anything from this folder, unless you got the message to replace a file.
4. Now run the RootX10a_v2.cmd and select step 1 and follow the instructions. If done correctly you will see a window that starts to write and write and write a lot of things. This process will take around 5 minutes, so be patient. (It is like if you were flashing your phone)
5. Turn your phone on and wait until you get the configuration screen.
6. Now connect the phone to the PC and run PC Companion or SEUS. If it shows that there is a new software for your phone, follow the instructions and update if you want.
7. Enjoy your phone on Android OS 1.6 or 2.1 with your operator
Thank you on anticipation to any help offered.
I have had a look here, but am not 100% if this is all that i need to do?
Sorry, not able to post the link, being a new user.
The one part that is not clear to me is where they say, "Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close"
What is it that im supposed to copy?
No.. no...
You need the flashtool and the 1.6 files..
I cant seem to find the 1.6 files...
Why do you need 1.6?
SE seem to have done something with the update 2.1 where the phones Bluetooth will connect to my vehicle, but only for about 40 seconds, then removes its self and then re attaches, then removes its self again and this goes on for the duration the handset is in the car with me.
The handset i have just now was a replacement for my original and came with the 2.1 OS already updated.
The original 1.6 OS that was on the phone connected to my vehicle and gave me phonebook access.
I have neither now hence why i wish to roll back to the software that is compatible with my vehicles system. 1.6 buildR1FA016 Kernel 2.6
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
OmegaRED^ said:
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
Click to expand...
Click to collapse
Thanks for the above, but can you break this into more simple instructions, links etc as this is way above me. I'm not totally useless, but i have never done anything like this, so it is all double dutch to me at this point in time,lol.
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Had a read at the flash tool thread and even more confused now, too much information and no understanding of what it all means.
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Bonzo67 said:
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Click to expand...
Click to collapse
Dude.. all the threads have the answers.
Read abit it won't kill you.
OmegaRED^ said:
Dude.. all the threads have the answers.
Read abit it won't kill you.
Click to expand...
Click to collapse
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Bonzo67 said:
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060703
Make sure you are updated to NoDo...
Here is a quick and easy guide:
UPDATING TO MANGO
1) Install the Windows Phone Support Tools 32 bit 64 bit
2) Connect your phone
3) Run Update.bat
4) The batch file will backup your phone, install the updates, and copy your backup to C:\PreMangoState
5) Zune should open and prompt for an update. Follow instructions from there.
6) After installing the first update, Zune will update again to 7661.
RESTORING NODO
Automatic:
You can use the Restore.bat file to automate the restore.
Manual:
1) Copy your backup in C:\PreMangoState to %userprofile%\AppData\Local\Microsoft\Windows Phone Update
2) Run Zune, navigate to settings, click Update, and press Restore
Dude, is this safe or aare there chances of BRICKING my phone?
[email protected] said:
Dude, is this safe or aare there chances of BRICKING my phone?
Click to expand...
Click to collapse
There is always a chance, but in this situation it is minimal....Just make sure you are on NoDo, and follow the steps properly.
I updated to Zune a few weeks ago, my issue is that I cant seem to revert back, I have backups in my premangostate folder, each one is about 4GB, but when I put a backup folder in the windows phone update folder and run the restore.bat it says there's no restore point found.. any ideas what im doing wrong?
Edit: I mean updated to mango..
I actually just got over this problem, took me a bit to figure out.
What you need to do is what I did (not sure if it will work):
Delete the PreMangoState folder
Empty recycle bin
Downgrade to zune 4.7
have the WP support tools (Beta 2) installed
restart computer
do the Update.bat program
It should work as normal. When your phone is up to Mango status, then upgrade to Zune 4.8.
My theory is that the update.bat files know that the PreMangoState folder is there if you haven't emptied the recycle bin (since all that is doing is marking the space on your drive as free). However, emptying the recycle bin and restarting clears the space for good, and the update file will work as if it was run the first time.
How to confirm NoDo again?
is this will work on Tmo-US carrier DVP phones.
Appreciate it! But we need to point out this is update to Mango beta, right?
I used the other technique posted for my Tmo DVP and works great. Basically manual without the BAT files and W/o Phone support tools installed. Can't find the link though.
can you pls tell me the steps
cdgoin said:
I used the other technique posted for my Tmo DVP and works great. Basically manual without the BAT files and W/o Phone support tools installed. Can't find the link though.
Click to expand...
Click to collapse
can you pls tell me the steps to follow
Does this work for all DVPs or just T-Mobile? Does it have to be a Developer unlocked device?
All5horizons said:
Does this work for all DVPs or just T-Mobile? Does it have to be a Developer unlocked device?
Click to expand...
Click to collapse
It works for AT&T as well. Does not need to be developer unlocked.
NoDo
What the hell is this NoDO...Please explain
jrkatc said:
What the hell is this NoDO...Please explain
Click to expand...
Click to collapse
NoDo inshort for No-Donut. Its basically a codename (by MS) given to the Windows Phone Feb 2011 update that brought copy& paste functionality and serveral other improvements in the OS.
I failed to upgrade to the next version of Zune after running this. Now when I connect the phone I get the Zune Software update required box. When I click ok, it tries download then gives me the message, "Can't find the media for installation package for 'Zune WMDU Component'. It might be incomplete or corrupt."
Any thoughts or am I screwed?
in the links that the OP provided, there is a download for Zune 4.8. Just uninstall your normal zune and install that one from the downloaded files. Your library will be the same, it will star up normally.
Thunder_47 said:
in the links that the OP provided, there is a download for Zune 4.8. Just uninstall your normal zune and install that one from the downloaded files. Your library will be the same, it will star up normally.
Click to expand...
Click to collapse
Remember to BACKUP YOUR BACKUP, as uninstalling Zune will likely delete it.
I don't see the download for Zune 4.8 in my downloaded files. When I drill down all I get is the Prov, read me text file, restore bat and update bat. is it in the prov?
Ah - my mistake I must of forgotten that this download package did not include the Zune update
I followed this thread here when I originally updated. Its very thorough and helpful.
That did the trick. Up & running. thanks.
I just managed to root my SCH i400 (first ever rooting of any Android device for me).
I am very surprised by how smoothly it went, despite reports & warnings everywhere about complications (like this one - which should be totally ignored if you're using SuperOneClick v2.1.1 or higher).
For the benefit of n00bs like me who may be confused by multiple sources, resources, versions and problem reports, I am posting a step by step procedure that is confirmed (by me, on Windows XP SP3) to be working smoothly, without a single hitch of complications:
Phone: Make sure setting > applications > unknown sources is checked.
Phone: Make sure phone is in debugging mode.
Phone: Make sure SD card is unmounted!
PC: Make sure Windows USB driver for this phone installed and works
PC: Make sure .NET 3.51 SP1 is installed.
PC: Unzip SuperOneClickv2.1.1-ShortFuse.zip ==> C:\Program Files\SuperOneClickv2.1.1-ShortFuse
PC: Double-click SuperOneClick.exe
PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
PC (in SuperOneClick): Now click the root button and wait for the process to complete.
PC (in SuperOneClick): "BusyBox not found. Would you like to install it?" Yes!
PC (in SuperOneClick): "Root install has completed! Would you like to run a test?" Yes!
PC (in SuperOneClick): "Your device has been rooted! Would you like to donate now?"
Exit SuperOneClick, unplug phone from USB, power down phone, power on phone. -- this step might not be mandatory, I just did it to be on the safe side.
Enjoy!
Great job on this tut.
Sent from my SCH-I400 using xda premium
Nice...
I may have to sneak my wife away from her for a bit....
Sent from my DROID using XDA App
Froyo is so nice... Here's how...
Hey guys... new poster here.
Just got a (Gently used) Samsung Continuum for free from Verizon after the power button on my G Droid 1 broke.
Anyways, after rcving it and realizing that it would only support Android 2.1 - I was slightly upset.
My D1 was rooted and modded to the max many times over with just about every ROM you can get.
So after reading up about IMNUTS leaking the Froyo download for the Continuum, my hopes were raised.
It is now debinged, debloated, lightening quick and amazing!
There may not be ROMS out there yet - but I truly hope some of you geniuses decide to make a few.
Just wanted to say thanks and encourage you to do some research before rooting it.
Here's what worked for me.
Odin 1.3
Continuum PIT.pit file
froyo_modem.tar.md5
cwm_recovery_test4_adryn.tar
cyan Clockwork Mod Recovery (BLUE, not yellow) (update.zip file, which is placed on the root of your SD card - renamed to update.zip)
stock_deodexed_ec03.zip (ROM)
(Place all of these files on your Desktop for easy access)
How to do it...
1. Connect your phone to your computer and Mount it.
2. Place the cyan CWM Recovery zip file to your SD card. (rename it to update.zip & do not put it in any folders. Just drag the file to your SD card - whatever drive it is listed as. Mine is my Removeable F
3. Make a new folder on your SD card. Name it whatever you want. (Mine is named "Froyo") Place the stock_deodexed_ec03.zip file in the folder on your SD card.
4. Open Odin 1.3 on your PC.
5. While your phone is off... hold the down volume button and connect it to your computer via USB. The yellow triangle will appear and it will say "Downloading". (Some people say to take the battery out, but my Odin program would not recognize my phone without the battery. Whichever works for you is fine.)
6. In Odin - Click the PIT file button. Load the Continuum.Pit.pit file into the file field. (Just double click it once you find the file from your Desktop.)
7. In Odin - Click the PDA button. Load the froyo_modem.tar.md5 file into the file field. (same as #6. Just double click it once you find the file from your Desktop.)
8. Click Start in Odin.
It should think for a minute, then say resetting, then say PASS
Then your phone will probably turn back on - turn it off again and reconnect it to your PC in download mode as stated in #5 above.
9. In Odin - Click the PDA button again. Load the cwm_recovery_test4_adryn.tar file as you did in #'s 6 and 7 above.
10. Click Start again in Odin... same as before. (thinking, resetting and PASS)
Your phone will turn on again.
11. Disconnect your phone from the computer & turn it off.
12. Hold both Volume buttons and turn it on. It will boot into the Samsung Recovery mode.
13. Use your Volume buttons to go down to highlight "apply update.zip" Then find the place where your normal Menu softkey would be and push it. The phone should then reboot into Clockwork Mod Recovery. It will be orangish.
14. In CWM, use the Volume buttons to highlight Backup/ Restore. Use the Power Button to choose it. Then at the next field, highlight Backup and make a backup.
15. After is makes the backup, press where the softkey Back button should be to go back to the original screen. From there, do a Wipe Data/ Factory reset. Do not forget to do this part.
16. Once it does the Data Wipe - go back to the main menu and and highlight & select the "zip from SD card" choice. Find your "Froyo" folder (of whatever you named it) and apply the stock_deodexed_ec03.zip file.
17. After that, go back to the main menu again and reboot your phone.
It may take a while, but your phone should restart in Froyo.
Of course, you have to re-sign in to your Google network...
Thanks so much guys for all the posts. Without them, is nowhere near as cool.
Hanging at Step #5, Now what?
Thank you for sharing. Wish I could say it went as smoothly for me with my SCH-I400 Continuum... I'm still working on it! I followed recommendations of several different developers/rooters. I've installed .Net Framework 4.0 and the SDK developers kit (who knows, maybe I'll start a new hobby...), and now when I run Superoneclick it hangs at step #5 with this message:
link_image[1728]: 3252 could not load needed library 'libdiskconfig.so' for './zergRush' (load_library[1058]: Library 'libdiskconfig.so' not found)CANNOT LINK EXECUTABLE
I have rebooted the computer and the phone, unmounted the SD card, settings to allow unknown sources, and turned on USB debugging. I'm not sure why the config file can't be found, and I don't know where to get it...
Do I need to reinstall the SDK? Or install the additional Java developers software? Or am I over-complicating this whole thing?
Any ideas will be greatly appreciated...
-James
Perhaps the easiest way is to flash a rooted ROM through Odin (or Heimdall)... Especially if you don't use Windows. This is how I did it:
http://forum.xda-developers.com/showthread.php?t=1203597
Two topics in one thread?
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
bighigmt said:
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
Click to expand...
Click to collapse
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Txwolf1980 said:
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Click to expand...
Click to collapse
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
bighigmt said:
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
Click to expand...
Click to collapse
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Come on now...
ciscogee said:
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
I spent 6 hours last night troubleshooting, researching, digging deep, and "using that little search box." Seems to me You guys need to "just read the thread." It's about rooting your phone, period. If a forum is out there, I've probably read it. I'm using superoneclick to do it. SDK is installed. Net framework is installed. My error message frome SOC is above. When I am finally rooted, THEN I will install several programs - starting with a wifi tether.
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
bighigmt said:
...Seems to me You guys need to "just read the thread."...
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
Click to expand...
Click to collapse
well i did read the thread...
ive been out of town for a week and finally back on my pc... i would love to help you yet more info is needed.
you are running dl17 stock 2.1 correct?
what OS is your pc running?
and yes i have same phone as you. i have used superone click on ec03 build once.
just for root. but then flashed a deodexed rom to use custom mods and apps.
and since have been flashing rooted kernels, imnuts and adrynalynne have released most all of them.
there are a few ways to root the device, best bet is, as always is go to IRC.
clarity and patience are key, we all got to practice both
I rooted EC09 with soc no problem. If I send someone the EC09 could they extract the apks and send them to me? I deleted some sys apps for the ticker and rss feeds and need them back now to use it.
Sent from my SCH-I400 using xda premium
Unzip factory.rfs of ec09 to grab missing apks and put them on sdcard and install from there.
Sent from my SPH-M580BST using Tapatalk 2
verizonless said:
[*]PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
Click to expand...
Click to collapse
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
verizonless said:
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
Click to expand...
Click to collapse
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
trailblazer101 said:
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
Click to expand...
Click to collapse
Im assuming by now everyone is on EG04 Gingerbread?
The Xperia X10 Rooting Toolkit also works flawlessy with the Samsung Galaxy Note and gives you full root access (tested by myself)
Just follow the instructions to root/unroot the device here
http://forum.xda-developers.com/showthread.php?t=1319653
Confirmed working!
Since the ice cream sandwich is not out yet, what is the advantage of rooting it now?
clubtech said:
Confirmed working!
Click to expand...
Click to collapse
You are using AT&T and have the note,from wish retailer you buy yours?
please excuse my trivial question, but rooting the Note with the instructions you provided is it possible to install any kind of apk file?
finanziere said:
please excuse my trivial question, but rooting the Note with the instructions you provided is it possible to install any kind of apk file?
Click to expand...
Click to collapse
You don't need to root to install apks.
wonsanim said:
You are using AT&T and have the note,from wish retailer you buy yours?
Click to expand...
Click to collapse
eBay...
10chars
clubtech said:
eBay...
10chars
Click to expand...
Click to collapse
Thanks
is a little expencive on ebay
schölli said:
The Xperia X10 Rooting Toolkit also works flawlessy with the Samsung Galaxy Note and gives you full root access (tested by myself)
Just follow the instructions to root/unroot the device here
http://forum.xda-developers.com/showthread.php?t=1319653
Click to expand...
Click to collapse
could somebody tell me if this root method increase the binary counter??
thanks..
kersh said:
You don't need to root to install apks.
Click to expand...
Click to collapse
thanks, but I mean the non official apps or those that are cracked.
is it possible to install these without rooting the device?
m_adnan said:
could somebody tell me if this root method increase the binary counter??
thanks..
Click to expand...
Click to collapse
It won't
Sent from my GT-N7000 using xda premium
Worked for me! It was even easier than rooting an HTC Evo 4G. This thread, or at least the thread referenced in the first post, should be stickied in the Development sub-forum.
I am a Noob and I can Root my Note!
I had experience rooting a Milestone 2 with SuperOneClick and an unbranded Android Tablet with Z4Root. (Thanks to developers of these!)
Unfortunately, both these methods did not work on the Galaxy Note so I came here and found this thread.
Unfortunately, ADB drivers was an issue with the zergRush Exploit on first run. The easiest way to get around this is to install PDANet on Windows and have it install the drivers for you. No need to complete the whole installation, just watch when it's finished installing USB drivers and then when prompted to continue, just cancel. Then re-run the zergRush Exploit and it should do its magic (Again thanks to the developers who work on these!)
While I'm able to freeze some apps with ROM Toolbox, I'm unable to change boot animation or the battery icon. Would appreciate if anyone could help with this!
Rooting hav no relation to install official/crckd version of apk.
Rooting needed for those application which are needed to access your system data e.g backup etc
when you need to install these kinds of application (weather off/unoff) you needs Root.
The optional unrooting package works also perfectly (just for info)...
i have sent back my Galaxy Note to amazon just to wait for the white version of the Note.
This method won't increase your binary counter, so root and unroot it as often as you like
Never either had any problem at all after rooting it, so this method is also stable and won't crash your device in any way or crash any applications...
Root confirmed working here, superuser.apk doesn't have permissions set properly but still works, easy to fix, updates fine from market.
Awesome - confirmed working. This needs to be stickied... other websites are promoting netchips CWN kernel method instead of this MUCH simplier way.
For you noobs with a clean system (that means me!), get the following files:
Note I run a 64 bit windows box, get the 32 bit variants if necessary.
You need:
1) Latest version of Kies
www.samsung.com/ca/kies/index.html
download file for me was: Kies_2.0.3.11082_152_4.exe
2) Java:
www.oracle.com/technetwork/java/javase/downloads/index.html
Click on jdk and download. File for me: jdk-7u1-windows-x64.exe
3) android sdk:
developer.android.com/sdk/index.html
My file was: installer_r15-windows.exe
4) zergrush root script
http://forum.xda-developers.com/showthread.php?t=1312859
grab the zip file in that page i.e.
DooMLoRD_v1_UNROOTING.zip
and unzip it to your windows box.
Install 1, 2, 3 in that order.
Find the SDK Manager program in your sdk install directory, double click it, and download/update 'Android SDK Platform Tools'.
Note you can't run the sdk manager program from the command prompt, or it'll complain that directories are being locked.
Now follow the instructions on the zergrush page, i.e. do the 'before you begin' stuff.
Go to the directory where you unzipped the doomlord zip file, run the runme script from a command prompt,and that's it.
To test, download terminal monitor, run it, and do a 'su' then 'id' and see if it says you are root or not.
Good luck!
- Frank
sir can i ask a question?
after i install the cwm and i will make a nandroid back up before rooting the phone.
if i restore the unrooted back up. Will i go back to became un root again and go back to out of the box state?
will this work with the Korean version of the Note? thanks in advance.