[Q] Need help - HD2 Android Q&A, Help & Troubleshooting and Genera

I have instaled the Android from following link
http://forum.xda-developers.com/showthread.php?t=893948
it was working fine from last 7 months but suddenly my touchscreen stops working.
i was using internet via WIFI and all of a sudden touchscreen stops working.
I hardboot, taken battery off and SD card off.......nothing works........any suggestions.

vikramdeepsingh said:
I have instaled the Android from following link
http://forum.xda-developers.com/showthread.php?t=893948
it was working fine from last 7 months but suddenly my touchscreen stops working.
i was using internet via WIFI and all of a sudden touchscreen stops working.
I hardboot, taken battery off and SD card off.......nothing works........any suggestions.
Click to expand...
Click to collapse
Yes Flash a different Rom..... This way you will know if its your roms fault or its hardware related
if that doesnt help theres a chance your phone overheated and fried the touchscreem module

i flash a new nand rom but still my touch screen is not working...........so any ways to fix the hardware problem.........

vikramdeepsingh said:
i flash a new nand rom but still my touch screen is not working...........so any ways to fix the hardware problem.........
Click to expand...
Click to collapse
Yeah, get it fixed.
If you have a hardware problem then you need to replace the hardware obviously.
The digitizer ribbon is right underneath your end key and its a very common fault on HD2 as it tends to break after a while on random devices.
If it is the digitizer you will need to get it replaced. Flashing different roms isnt going to solve anything unless its a software problem which I very much doubt.

sometimes working and sometimes not
hello friends,
I format my SD card, downloaded the fresh rom from this forum, DFT nand Android,
Flashed the rom once again, all of a sudden my touchscreen starts working, which is an amazing thing for me, only problem is that out of 10 times 2 times it is not working and I have to press the green button(call) and then again I have to go back to the lock screen and this time touch screen is working.
Any Help why it is behaving like this.
Moreover I want to roll back to win 6.5 and how to do that.

casemandan said:
Yes Flash a different Rom..... This way you will know if its your roms fault or its hardware related
if that doesnt help theres a chance your phone overheated and fried the touchscreem module
Click to expand...
Click to collapse
yes you are right I think...........i have now tried each and every method and even restored the phone back to WM6.5 but then also my touchscreen is not working.
what I analyzed is that when its cold it starts working and when it become hot while charging or playing around with it just stops responding even in middle of the application.
so now I have to take the phone to the HTC work centre to get it fixed.

Related

My touchscreen no longer works

Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
thehelios said:
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
Click to expand...
Click to collapse
It has been a problem for me with some builds. I suggest you to make a backup with some app like Titanium Backup and reinstall Android. Try with different kernels if you still have the problem. Don't worry for the moment!
I have had this problem a few times. I still can't quite figure out exactly what makes it happen but it seems to be something to do with sleep. My solution is to restart and go into NAND then do a backup apps and then quit. something gets woken up in the screen and it starts to work again. No idea why, it just does. Good luck.
So I guess my touchscreen is just dead. I reinstalled android, reflashed my phone for the froyo rom, and I even flashed a windows rom onto my phone but nothing. I even opened my phone to see if it was connected properly to the mobo but all seems right.
On the windows rom, when it does the screen calibration, I can mash the crap out of my screen and I guess it picks up some sort of signal every now and then because the crosshair moved.
If anyone knows anything about this, please reply. I don't really want this to be the end of my vogue. It's been a good 3 years so far!
http://cgi.ebay.com/Touch-Screen-Di...749473?pt=PDA_Accessories&hash=item439b537fa1
You may just need a new Digitizer.
Can get them pretty cheap on e-bay - just have to wait since coming international mail.
I am having similar problems. Usually when the phone goes to sleep and I wake it up the touch screen is unresponsive. Only way to get touch to respond is to reboot.
I have tried it on my vogue on both the fresh froyo and experimental fat free froyo using both the 10-9 and 9-29 kernel on nand. I have also used nbh editor to change the panel types (vogue uses auto detect so I changed it to Polaris) and still the same problem. I thought perhaps there was a problem with a program but I have no programs installed right now and the problem still persists.
Does anyone have any suggestions? My phone was working fine up to a few weeks ago and I would hate to be forced to use windows again. I have reinstalled windows and it works fine there so I don't think it is hardware related. It seems something happens when it goes to sleep.
Well there might be a driver issue. Try going back to the stock rom for your device and see if the touchscreen works, if it doesn't work, then it's probably broken. Try opening the vogue and disconnecting and reconnecting and then turning your device back on and test it again. if it still doesn't work, then yea you will have to get a new digitizer.
You can also try using other releases/roms with different kernels.
good luck!! and may your vogue live on!!
Thanks, I've installed a windows rom and the touchscreen has no issue there so it leads me to believe it is not the digitizer, especially because it seems to break when it goes to sleep.
I will try even older kernels and perhaps a donut build to see if the problem still exists.
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
n2rjt said:
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
Click to expand...
Click to collapse
Hi! I had this problem, that was the reason why I put back WM. I experienced it using .32. I think it was from 1-Oct-2010 approximately when it started to fail.
IT'S A CONSPIRACY!!!! Last week my screen broke as well. I was running "not so super froyo" and it would work for a second then just be completely unresponsive... needless to say I now have a droid x *fap**fap*

[Q] new to HD2..touch screen problems!

i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
isoDUB said:
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
Click to expand...
Click to collapse
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
T-Macgnolia said:
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
Click to expand...
Click to collapse
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
isoDUB said:
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
You can't have them all. You can have WP7 running from NAND and Android running through SD. Not too sure on the rest though.
Sent from my Nexus One using XDA App
isoDUB said:
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
T-Macgnolia said:
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
Click to expand...
Click to collapse
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
isoDUB said:
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
Click to expand...
Click to collapse
You know I can not say for sure if turning off the screen lock would solve your problem. But it sure is worth a shot so I say go for it and see. Also you can use a app like Touch Tools or BsB Tweeks to cut the lock screen off in Windows Mobile. Just do a search here on XDA or do a Google search for them and you will find them I recomend the Touch Tools this is a really great app. It adds a lot of tweeking ability to your HD2. I love it and have been using it for atleast 5 to 6 months now. Anyway if turn off the lock screen with one off these apps and it fixes your issue. Then you will know if you turn off the lock screen in Andriod it should have the same result. Heck if it fixes it you might just keep Windows Mobile ha ha just joking. I would not blame anyone for flashing a NAND Andriod ROM and getting rid of Win Mo. I personaly like Win Mo.
You're best off investing in a USB cable too lol. Your local hardware shop will have them. Its just a basic USB to micro USB cable.
I dont think any amount of tinkering with any OS is going to resolve your touchscreen problem............
The screen is cracked right?? Theres your problem.........
Could be issues with the digitiser as well because of this.
First job, new screen...........
i've been messing with the phone last night, and it seems the problem is related to the end call button. it seems whenever i try to wake up the phone with that button, it will freeze, while using the green button will wake up with no problem most of the time (>20% chance of freeze). it seems the freezing doesn't happen after a certain amount of time, since i left the phone in sleep all night and woke it up in the morning no problem. so in case anyone has the same problem as me and is too cheap to fix it, try only using the end call button when actually calling/putting the phone to sleep.
and where could i get a micro usb cable cheap besides online? i think t-mobile has them but they're like $10+...
it's dead again!
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Body said:
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Click to expand...
Click to collapse
isoDUB said:
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
Click to expand...
Click to collapse
Sorry to tell both of you but your problems are hardware related. Member isoDUB yours is most definitly a hardware issue, but it has been a little bit sense you posted that post so I hope you have got your HD2 fixed or are working on getting it fixed. Member Body yours sounds hardware related to cause if you flash another ROM and you still have the problem with your buttons then it is most definitely a hardware issue.
Best option is to send to HTC and see if you can get a new one for free if you are under warranty.
same problem
hi
im not original english speaking so please excuse my bad english.
a few days ago i got the same problem. the display doesn't work when the phone was waked up with the endcall button.
when i woke up the phone with an other button the display worked.
i sended it to htc an they just told me they will not repair it because it is not in the original contition.
i flashed it with the latest original rom from htc but they didn't tell me what is wrong in detail.
i answerd them an asked what is wrong but until now i didn't get an answer.
Hello, I have a similar problem. When you unlock the screen so we jump on the green but some spots that disappear after a while.
Disaster strikes !!! Same prob here !!!
its indeed something with the buttons ... Touch screen is dead ... but sometimes its workin!!
Three months ago ... I changed the case of the HD2 with a new one. The "old"one was full of scratches ...
I think yhat HTC is not gonna accept that ... the "void-label" on the screw is damaged...
What do you think Guys ??
Grtz
every where the htc hd2 screen problem ........... i think that every one who has the htc hd2 facing the screen problem we shopuld start the new thread where we that who has the htc hd2 without any touch screen problem
Have the same damn problem ..once the screen is locked ..its impossible to slide it to unlock ..previously it was working 50% of the time and now it doesnt work at all :-(( ..
Any suggestions ? ...I read alot on the forums and people seem to say that its digitizer related but the imp thing is to note that almost 98-99% of the people having this problem are frequent Android rom flashers ..so does Android have something to do with this and will flashing original stock rom back be the solution ??

HD2 Always freezing on any android build

Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Does the area beneath the battery shell, behind the phone, feel particularly hot? If so, it's likely overheating (HTC calls it a current leakage... something?) and if you're under warranty you may wish to send it back.
Otherwise, there are fixes (suck as devising your own extra heatsink, reflowing the solder).... but it's non-trivial.
Does it freezes while using any particular applications, and what happens when it freezes???? I mean does it get to normal by itself or you have to pull the battery out and restart your HD2.
I am asking this because I was also having the same issue with my previous HD2, and then I came across this post
http://forum.xda-developers.com/showthread.php?t=1189544
which explains a lot about bad blocks which affect the android build.
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
hstr said:
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
Click to expand...
Click to collapse
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
I'm having the same problem. My HD2 will freeze if I play games on it causing me to pull out the battery and when I boot it up, sometimes it will freeze at the MAGLDR screen, will freeze as soon as the rom boots. Right now my phone seems stable and I'm only using it for texting and making calls and nothing else for the fear of damaging the phone any further. I have a TMOUS phone btw.
DutchMaster117 said:
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
Click to expand...
Click to collapse
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
hstr said:
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
Click to expand...
Click to collapse
That's actually the same thing I do.
Alright I know this might sound ridiculous but it seemed to work ( so far ). After 6 hours of trying to get this phone to work I decided to try something I saw on another thread. I got an icepack and did a complete install while having the phone on the icepack to keep it from getting warm. To my suprise it worked... I'm using my phone now with no issues yet and its been about 12 hours and it hasn't frozen yet. Although it did do a random reboot once ( I have a few bad blocks so I'm guessing that might be the reason). But Yea this worked for me some how. I'll update on any issues I get as soon as I can.
Sent from my HD2 using XDA Premium App
Same problem for me. My hd2 always freezes with any sense ui android build. MIUI and Nexus HD rom works fine.
My simple advise is... reinstal windows. And try again.
This worked for me when i started with the HD2.
Sent from my mercury using XDA App
Hi I had the same problem, but I sent my phone for repairs and it never froze again. According to HTC they just replaced the main board. But before I did that I actually flashed the official RUU (windows 6.5), and it continued to freeze, so I was quite sure it was a hardware problem. Indeed after repairs my phone didn't freeze anymore.
Sent from my HD2 using XDA App
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
I also had 2 x HD2 which did this.
Froze when got to hot, or if using gps or mobile data.
Sold it 2 weeks ago, now own Desire HD and it's BRILLIANT!!
So now ive been running rafdroid on the phone without an sd and it runs.. but laggy since theres almost no space left in phone and it isnt getting hot. It only gets hot when it operates with the SD inside.
anyone know anything about that?
same problem
i have the exact same issues. the phone freezes every time it boots, be it magdlr nand, sd, wm 6.5 anything. however my old hd2 had no problems at allbut i broke it changing the screen digitizer and lcd.
(the white plastic on the connector that connects the lcd and digitizer to the main board broke.)
im pretty sure the reboots are mother board related but i don't know if telling tmobile or htc that will do anything because the phone is old. (i got this other hd2 from a guy on craigslist.)
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
oztorque said:
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
Click to expand...
Click to collapse
I want to ask whether this cooling trial fixed freezing problem forever? suppose if u use your set for more than for hour streaming over wifi? never it got freeze again?
The best solution that you can flash back to WinMo 6.5 and run Android from SD Card.
I have the same issue... but...
Make a complete instalation with an ice pack?? Are u joking me?? It works??
well... i have not to lose... i will report if i try it...
I flashed stock rom and run android from sdcard. but when i press Haret.exe is going to HTC green logo and after restarting. some solution?
Similar problem
I have a similar problem. But with two different phones.
I bought LG Optimus One about two years ago. After a few months, some freezes appeared... I've sent it to manufacturer three times and every time they changed some parts... but nothing have helped. I've made some experiments (another battery, SIM card, MicroSD card, custom ROMs) and than I realized, that the problem occurs only while the mobile internet is ON.
This summer, my friend offered me used HTC HD2 and I bought it. He used to have Android there with no problems. After a few weeks, the freezes occured again. And again: I can surf internet all day by wifi with no problems, but when I tunr on the mobile internet (MI), the phone freezes. The back cover of battery is a bit hot, but this appears while long using the phone too without MI (without freezes).
I've tried almost everything to solve this problem: changed SIM card, changed SD card, everytime with flash of the newest ROM... nothing helped.
I'm not sure if the problems with LG OO and HTC HD2 have the same reason, but I can't believe I can buy two phones with similar problems without transfering them.
What aboutthat crazy plan of flashing with ice cooling? Does it work afret a few months too?
PS: Sorry for my English

Weird HD2 unresponsive screen

Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?
Make sure the kernel, and Rom are up to date.
I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.
ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck
well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?
i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers
Where can i disable compatibility mode?
I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!
I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1
Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now
Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?
..
Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.

HD2 with semi-broken digitizer?!

Hey guys,
a friend has a HTC HD2 what has some strange issues.
If you start the phone, everything is fine, you can work with it like it should be.
But after you switch of the display and reactivate it after some time it seems that the digitizer is no more working.
It's just luck if you try it several times and it work again. Most of the time it doesnt.
At first for me it seems to be a software issue.. he was still on Stock ROM WM 6.5 and nothing changes anyway.
So I did all steps to unlock the phone and installed ICS 4.0.4 release. Still same issues here... :-/
After that I gave WP 7 a try, there it seems to be a bit better but still the same trouble.
After turning on the display again the digitizer is no more working. But directly after a reboot it works still fine even with multitouch.
Does anyone had ever heard a a HD2 like this? Is the digitizer just broken or can I repair it in any way? I mean it works great if you don't switch the display off
May you find something useful here http://forum.xda-developers.com/showthread.php?t=1774566

Categories

Resources