Flashing MIUI ROM - myTouch 4G Q&A, Help & Troubleshooting

hey guys, quick question....i was about to flash MIUI on my phone (currently running Virtuos)
I just downloaded the ROM and Demonspeed
and i noticed that both together are like 117mb, isnt that too small compared to the other ROMs??? just asking before i flash
also i dont understand really good the flashing two folders and whats the NAND back up??

Verify both file's MD5s and you can check for yourself that both files are good. That size is correct. CM7, MIUI, etc are much smaller than Sense ROMs like VU.

a nand back up is backing up your current rom in clockworkmod revovery before anything goes wrong. if something does happen you can easily restore it

Related

Advice on Magic 32B

Hello All,
I have been pointed to the dream forum in search of a new ROM for my 32B Magic. At the moment I am using cyanogen 4.2.13 with the 10MB RAM hack.
Are there any other ROMS out there that are on par with this ROM?
I find the cyanogen one 100 times better than the original ROM that came with the phone but I always like to experiment.
Any suggestions?
Thanks in advance
WG-Build, Super D, and TheOfficial
All three are plenty fast, if not faster than CM's latest. And they all have available ram hacks, not sure about Enom's though. Oh well.
Thanks for that - would you say there are any benefits from switching to any of the above?
Speed is the benefit. Try them out!
Since you have AmonRA's latest, perform a Nand + ext backup of the CM build you have right now to make it easier for you to revert back if you don't like those builds
Then after that, simply wipe data, dalvik, and sd ext. Go to partition sd section and repair ext. Enable USB toggle, copy rom to sd, then flash it.
If you don't like the rom, wipe data and do a Nand restore of the CM build you previously backed up.
I have tried the latest of these ROMs. The Official, WG, and Super-D. I think the smoothest and fastest is Super-D 1.6. Haven't tried his beta 1.6.6.
Tried the Super-D 1.6.6 and it was definitely faster than the cyanogen ROM.
A few glitches though so I did a nandroid restore for the first time and was very impressed!
Is there a known bugs page for the above ROMS? I could read through the whole posts but there over 50 pages!
I also noticed that my SD card had not formated when I put the Super-D ROM on even though I did the wipe exactly as BoomBoomPOW suggested.
It also didn't recognise my partition - any ideas?
Going to go ROM crazy now I know how simple the nandroid restore is
jazz8146 said:
Tried the Super-D 1.6.6 and it was definitely faster than the cyanogen ROM.
A few glitches though so I did a nandroid restore for the first time and was very impressed!
Is there a known bugs page for the above ROMS? I could read through the whole posts but there over 50 pages!
I also noticed that my SD card had not formated when I put the Super-D ROM on even though I did the wipe exactly as BoomBoomPOW suggested.
It also didn't recognise my partition - any ideas?
Going to go ROM crazy now I know how simple the nandroid restore is
Click to expand...
Click to collapse
You have to do the format yourself in recovery.
Ok - i'll give it a go
Thanks!

A good rom suggestion?

hey!
Anyone have any good suggestions for a rom for HTC - Mytouch 4g? I am pretty much a n00b even though I manage to pull a complete ultimate true root and s=off lol.
i have the original tmobile stock rom though, is there a just Android 2.2 or Android 2.3 Vanilla rom for HTC mytouch 4g?!
I've seen EvilZ and Ice galicier , but I am not sure which one to go about .
Any (good) suggestions would really help!
thanks a bunch.
LimitsX said:
hey!
Anyone have any good suggestions for a rom for HTC - Mytouch 4g? I am pretty much a n00b even though I manage to pull a complete ultimate true root and s=off lol.
i have the original tmobile stock rom though, is there a just Android 2.2 or Android 2.3 Vanilla rom for HTC mytouch 4g?!
I've seen EvilZ and Ice galicier , but I am not sure which one to go about .
Any (good) suggestions would really help!
thanks a bunch.
Click to expand...
Click to collapse
Search the dev section for nightly CM7, Its very vanilla-ish gingerbread and very stable btw, some pros?...improved battery life, open to customization, overall a better looking ui, runs silky smooth, and the kernel supports oc up to 1.5
Sent from my rooted glacier running CM7 and grankin's oc kernel
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
LimitsX said:
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
Click to expand...
Click to collapse
1. Regarding how stable it is..its super stablr considering its still an alpha and i trust it enough to use it as my daily driver (i need 100% reliability and the phone has never let me down). Only known bugs are qik not working (and its a 2.3 compatibility issue rather than a rom issue) and you can use tango instead, ffc has a reverted x-axis effect xD..., mms might be blurry (which is fixed by changin the ua undr mms settings) and some may have other bugs i have not yet noticed
2. Your current 2.5 cwm will not work with gb, you will need to flash any 3.xxx version to install cm7. Cwm is designed to do backups of ur current working system and can be restored in the events of ur phone acting up (i.e bootloops or major issues...) although its also used to easily install .zip files (cm7 is a rom contained in .zip file and will need to be installes via recovery), its used also to wipe the system cache, dalvik cache and/or full wipes in the events of issues.
3. Here:
http://forum.xda-developers.com/showthread.php?t=916930#
Thats the nightly thread, you will have a "nightly" update you can flash thru recovery
4. If u go to cm7 you will have to (must) do a full wipe. Download titanium backup and back up ur existing apps and data (dont wanna lose ur angry birds progress), once cm7 is up just download tit bcup again and you'll have ur data back.
Hope this helped
Sent from my rooted glacier running CM7 and grankin's oc kernel
LimitsX said:
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
Click to expand...
Click to collapse
one question at a time, bro.
1)the CM7 Nightlies are "Fairly" stable, though they do have bugs, as they are not fully complete (then again, no rom really is devoid of bugs and things to improve).
2)as for flashing CWM a second time, sometimes the recovery doesnt stick and when you boot into recovery, you will still go to the stock recovery. The second flash of CWM should fix this, and you should go to the CWM screen.
3) The purpose of CWM is to flash the various ROMs you'll find in the Development Section of this area. It also allows you to create nandroid backups, which will allow you to restore your phone to a specific state in time if something goes wrong or something (also helps to flash back to a rom without having to reinstall everything, which takes forever)
4)to flash a gingerbread (either CM7 or otherwise) you'll need to flash the CWM 3 to your phone manually, using the methods laid out in several threads in the Dev section. then you'll need to flash the rom, plus the Gapps for that rom (google apps like gmail, market, etc)
5)and yes, flashing a new rom will wipe all the data f(apps, accounts, call and text logs, etc) from the previous rom the previous (or youll need to do so before flashing). Now you see why you make nandroid backups also, using a backup application like titanium or MyBackup can make that process much simpler.
Arighty. I've been reading that CM-7 nightly thread for now!
I am excited now to flash it! Plus your suggestion and said it is the most vanillaish rom avaliable .
Okay, so I have Rom Manager Preimum that is 3.0.0.7 and since I flashed it currently, so CWM is 2.5.1.2 .
and I need CWM 3.x?
Regarding CWM 3.x? theres ClockworkMod 3.0.0.5 and clockwork-3-20110116-MT4G.img .
Which one of the above CWM 3.x, is better to use? Also, they are in .img format, so how would I go about flashing it?
this thread: http://forum.xda-developers.com/showpost.php?p=10670110&postcount=531
its using CWM 3.0.0.5 , is that a good method ?
And what happens to my current CWM 2.5.1.2? I already flashed it with that, do i need to "unflash" it ?
After that CWM, I use Titanium backup (i have pro version) to backup my apps + phone contacts right? I don't want to backup tmobile bloatware . I only the apps i paid for through android market.
And then, I download CM-7 and transfer it to my phone via usb cable to the sd card. Then use ROM Manager to flash it?!
thanks again!
jmwils3 said:
one question at a time, bro.
1)the CM7 Nightlies are "Fairly" stable, though they do have bugs, as they are not fully complete (then again, no rom really is devoid of bugs and things to improve).
2)as for flashing CWM a second time, sometimes the recovery doesnt stick and when you boot into recovery, you will still go to the stock recovery. The second flash of CWM should fix this, and you should go to the CWM screen.
3) The purpose of CWM is to flash the various ROMs you'll find in the Development Section of this area. It also allows you to create nandroid backups, which will allow you to restore your phone to a specific state in time if something goes wrong or something (also helps to flash back to a rom without having to reinstall everything, which takes forever)
4)to flash a gingerbread (either CM7 or otherwise) you'll need to flash the CWM 3 to your phone manually, using the methods laid out in several threads in the Dev section. then you'll need to flash the rom, plus the Gapps for that rom (google apps like gmail, market, etc)
5)and yes, flashing a new rom will wipe all the data f(apps, accounts, call and text logs, etc) from the previous rom the previous (or youll need to do so before flashing). Now you see why you make nandroid backups also, using a backup application like titanium or MyBackup can make that process much simpler.
Click to expand...
Click to collapse
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
LimitsX said:
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
Click to expand...
Click to collapse
well, Im running a Desire HD port (gorillaSense), so my rom has that feature, but I havent used CM7 in a little while. However, if you sync your contacts to google instead of t-mobile, youll have all of them no matter what rom you use, no matter if it has t-mobile contacts or sim card contacts or anything.
and yeah, the t-mobile rom is annoying, thats why I got off it as soon as I could and never looked back. Personally I prefer the Sense ROMs, but I can see the merits of the CM and AOSP ROMs too, its personal preference.
LimitsX said:
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
Click to expand...
Click to collapse
K, so i checked the settings on the contact application and you can only export your stored contacts to the SD card, you are able to import from SIM but not to export to SIM. Like the post above stated though, as long as you are on an android phone you will have your contacts synced

CWM 3.0 Now available from Rom Manager... :-)

Hi Guys, New CWM 3.0 is available now from the ROM manager.
Im on sense rom.. will it bckup n restore sense rom or it is for 2.3 roms only?
Sent from my Desire HD using XDA App
override182 said:
Im on sense rom.. will it bckup n restore sense rom or it is for 2.3 roms only?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You can find All Versions of Clockwork Mod Recoveries in ROM Manager. So if you having any problems with old Roms you can use CWM 2.5.
CWM 3 doesn't support update-script, it requires update-binary and updater-script. So there are many mods and themes available which will not work with CWM 3.0. If you know how to convert them into flashable Zips then you will be able to use it. But anyway you can always revert back to CWM 2.5.
Does nandroid backups made with CWM 2.5 work with this new version?
Restoring backups of 2.2 roms doesn't work for me. Only way I can get a 2.2 rom to boot is if I flash a fresh zip
jontelfer said:
Restoring backups of 2.2 roms doesn't work for me. Only way I can get a 2.2 rom to boot is if I flash a fresh zip
Click to expand...
Click to collapse
Just use CWM 2.5 to restore backup of 2.2 Roms. It should be working fine, I tried on my DHD and I don't have any issues.
Awesome! Makes things easier when I want to flash CM7.
I was so glad to see this. I had the non-final version installed and it meant if I wanted to go back to Sense I had flash the 2.5.1.3 recovery first. Now with this being on the ROM manager I flashed the 2.5.1.3 then recovered Sense, flashed v3 recovery and backed up Sense. With that done I can go between it and CM7 or any other ROMs that allow far more easily.
Dyonas said:
I was so glad to see this. I had the non-final version installed and it meant if I wanted to go back to Sense I had flash the 2.5.1.3 recovery first. Now with this being on the ROM manager I flashed the 2.5.1.3 then recovered Sense, flashed v3 recovery and backed up Sense. With that done I can go between it and CM7 or any other ROMs that allow far more easily.
Click to expand...
Click to collapse
True.. Makes my life more easier...
It would have beign nice if I knew this stuff about v3 yesterday...when I couldn't get back any recovery, and I was beginning to believe that is something wrong.with my SD card. But I don,t understand ,why, if is a NEW (and supposedly a better version) doesn't, support the back up made with v2.5 (I read about the .bin, and .zip file in a.upper post, but It's a little to technically for me and I dont understand how this will help me if I use CM7 and ruu 2.3).
And the question is, will v3 recover the backup made with v3 of my sense Rom,because I don,t wanna try again and if it.doesn't,t work ,I will wake up my self again in the orange menu of v3 and then I have to flash again a Rom, downgrade from Rom manager to v2.5 and restore an older backup
Neat!
CM7 official release is probably not to far away then!
Thanks...!
Argh, really, is it so hard to check for the fs during backup, and then restore it using the noted fs? Why the stupid split for ext3 on 2.5 and ext4 on 3 ? Especially since 3 has no problem reading ext3.
movikun said:
Argh, really, is it so hard to check for the fs during backup, and then restore it using the noted fs? Why the stupid split for ext3 on 2.5 and ext4 on 3 ? Especially since 3 has no problem reading ext3.
Click to expand...
Click to collapse
Obviously Koush feels it is, don't forget CWM is open source, if you feel the check of file system and appropriate restore / backup is a minor issue submit a patch implementing it for review and I am sure Koush will accept it with pleasure.
re flashed today everything is nice. Except one backup from older CWM is not recognized.
Thanks for the heads-up
Anyone knows if it'll get the right google apps as well?
gapps-gb-20110120-signed.zip
thats the latest for DHD if i am not mistaken. Will checking
the google apps box get that?
TheLawyer said:
Anyone knows if it'll get the right google apps as well?
gapps-gb-20110120-signed.zip
thats the latest for DHD if i am not mistaken. Will checking
the google apps box get that?
Click to expand...
Click to collapse
You can check available google apps on here http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
I was using MIUI rom on my DHD and I wanted to restore a nandroid backup to return to Revolution HD, when I started Rom Manager, it told me there's an update to 3.0.x (Not 100% if it was 3.0.5 or something else), so I updated it.
Then when I tried to do a nandroid restore to my RevolutionHD backup, it went through the process properly, but it won't boot into the rom.
Can anyone help me out, please. I'm phoneless?
KDR1245 said:
I was using MIUI rom on my DHD and I wanted to restore a nandroid backup to return to Revolution HD, when I started Rom Manager, it told me there's an update to 3.0.x (Not 100% if it was 3.0.5 or something else), so I updated it.
Then when I tried to do a nandroid restore to my RevolutionHD backup, it went through the process properly, but it won't boot into the rom.
Can anyone help me out, please. I'm phoneless?
Click to expand...
Click to collapse
flash cwm 2.5.x from fastboot and reflash revolution

[Q] What to do after rooting?

I perma-rooted my T-Mobile G2, but now I'm lost.
Since I can't flash official ROMs, what can I do to update OS? Are there any options besides CM7? If I switch to CM7, does it mean I lose all my previous installations? And does it mean I'm stuck with CM forever? When do you expect official version of CM7 to be released?
Thank you in advance.
You can flash any ROM you want. There are many good solid ones in the Development forum here and other android forums of course.
If you're looking to back up your apps before you install a ROM (because you must wipe all data when installing new ROMs) I'd advise you download an app called Titanium Backup. I use it regularly when switching ROMs and it really is necessary. This can back up all apps, app data, and even system data if you want. You can then restore after flashing your new ROM.
CM7 is at RC-1 (Release Candidate) which means that it has been declared stable enough with few enough bugs for the general public. I've personally been running nightlies for a few weeks now with no issues, and the RC-1 seems to be similar. There really is no date for when it will become an official release, but if you're up for waiting that's totally understandable.
If you don't wanna go with the CM7 RC route, you can always go to one of the other Sense-based ROMs, or even CM6 which has been extremely stable for a long time now. You can always just check out one of the stock 2.2 roms as well, they're often optimized with no bloatware and often run quicker than the stock ROM with perm root you have now.
Changing ROMs is easy, and just because you decide one doesn't mean you can't switch to another. Just use the app "ROM manager" to backup, wipe, and install different ROMs as you see fit.
Basically which ROM you choose is up to you. Just look through the dev forum and check out the offerings, read then ask questions and try them out. I definitely recommend reading some of the stickies about backing up/flashing/etc. before you get going.
Kinda hard for me to give more info because it seems like you're pretty new. I'd just advise that you read up on everything and always do backups before you flash any ROM or update in order to restore if you run into issues.
tulgaa said:
I perma-rooted my T-Mobile G2, but now I'm lost.
Since I can't flash official ROMs, what can I do to update OS? Are there any options besides CM7? If I switch to CM7, does it mean I lose all my previous installations? And does it mean I'm stuck with CM forever? When do you expect official version of CM7 to be released?
Thank you in advance.
Click to expand...
Click to collapse
1. Download and install ROM Manager and within ROM Manager flash ClockworkMod Recovery. This will allow you to create and restore complete backups of your phone. This should be the first thing you do. Second, create a backup (a Nandroid). It will be almost impossible to screw things up permanently with ClockworkMod Recovery installed and a backup on your sd card.
2. After you have a backup created, you can start trying different ROMs and if you don't like it, just try another one or restore your backup. You can even have multiple backups of different ROMs and switch back and forth if you want.
3. You are going to see a lot of references to gapps, which is short for Google Apps. Many ROMs come pre-loaded with gapps - Cyanogen was stopped by Google from incorporating them into his ROM's so the package is made available to flash immediately after you flash a CM ROM. Once you log in to Google with your account (use the same one every time) all your market apps will start downloading from the market automatically - that is all the apps that you had actively installed before you switched ROMs. Your phone will be sluggish at first while it updates all your market apps. To backup apps that you've installed from your sd card, download Titanium backup.
4. Now that you're rooted you aren't stuck with anything. Your options are wide open. Just look over the XDA site. It'll be obvious how much you can do with your phone now.
I'm on CM7 now and its very stable. Download build #41 - 42 should be out by the morning. If you decide to go with that, you won't believe how much more your phone has to offer than the stock ROM. I don't believe you'll ever want to go back to stock again, but if you do there's information here in the forums to do that including unrooting your phone.
I agree with this, read about the different roms in the G2 Development Section especially.
It's a bit confusing with all the roms, but as long as you backup your rooted setup now, you should be free and fine to try several different ones. (See step 1 about by EdKeys).
I recommend purchasing Titanium Backup...it will allow you to reinstall all your apps relatively quickly and keep all saves/settings.
Try out a sense rom (for example Virtuous) as well as CM7. I tried out sense before, but it makes the phone feel slow despite being very cool. When I first rooted my G2 I went straight for Cyanogenmod 6.1.1, as it was the stable version. Cyanogenmod 7 RC1 is way better.
Good luck and I hope you find something you like!
I highly recommend Virtuous.
Also, this isn't stated anywhere normally, so I'll share with you: I absolutely suggest using ROM Manager for most everything - it's a GUI for Clockworkmod, basically, and makes things a bit easier.
HOWEVER
The only ROMs you'll find in ROM Manager are ones that the developer has submitted. Not all devs care that much, so you'll find a TON more ROMs to try in the Development subforum. To flash one of those, simply download the .zip file of the ROM to your memory card (it doesn't matter where, you could put it on the root or you could create a 'romstotry' folder if you wanted).
Once you have the zip file on your memory card, open ROM Manager, choose 'Install Zip from SDcard' and show ROM Manager which zip file you want to use. IT'll then pop up and ask if you want to wipe, and if you want to backup your current ROM.
If you're switching between two different ROMs, you *always* want to wipe. Always. If you're simply installing a new version of the ROM you currently have installed, you don't *need* to wipe (unless the dev specifically says that you need to, so read the changelogs), but it's a good idea to do so anyways. You'll have a bit more setup to do, but wiping will prevent most problems that people seem to have.
hope that helps.
Thank you very much all. I installed CM 7 RC1 and it works great. I will try other ROMs when I get familiar with CM.
tulgaa said:
I perma-rooted my T-Mobile G2, but now I'm lost.
Since I can't flash official ROMs, what can I do to update OS? Are there any options besides CM7? If I switch to CM7, does it mean I lose all my previous installations? And does it mean I'm stuck with CM forever? When do you expect official version of CM7 to be released?
Thank you in advance.
Click to expand...
Click to collapse
Hi - the first thing I did after perma-root was change the boot animation for my G2 - you can do it by hand, or you can use an application located in market - just search for 'boot animation.'
After that's it's straight to the custom ROMs - I'm using Sense Virtuous 1.0.0 and loving it.

help

folks, my a500 is overheating .. is getting too hot near the Dock Connector ...
is without overclocking, began in the ROM v10 ... already installed a four roms and the error still continues,
currently with honeyvillian, I leave with the original stock which is 3.0.1
I try the same way as was done to use mod 3.2, and does not work
... only shows the current version
well ..
current version: 1.0.1 Honey Villian ...
New Verson: N / A
I want to install the original version to send assistance to repair the high temperature
Verdeee said:
folks, my a500 is overheating .. is getting too hot near the Dock Connector ...
is without overclocking, began in the ROM v10 ... already installed a four roms and the error still continues,
currently with honeyvillian, I leave with the original stock which is 3.0.1
I try the same way as was done to use mod 3.2, and does not work
... only shows the current version
well ..
current version: 1.0.1 Honey Villian ...
New Verson: N / A
I want to install the original version to send assistance to repair the high temperature
Click to expand...
Click to collapse
You're not flashing your Rom correctly. I told you this in Thor's forum (at least the exact post was there also, so I suspect it's you, if it's not you, then accept my apologies ).
The reason it keeps telling you that a certain Rom/kernel is installed, is because it seems like you're just flashing one over the top of another without cleaning anything out. This is why your cpu overheats. You've got a corrupted OS.
Also, a Kernel image is not a Rom. And there are 2 types of kernels. 1 for a stock rom, and 1 for a cooked rom. You shouldn't mix the 2 or you may get problems depending on the rom. Another reason why your cpu overheats.
Do this. Put your SD in your PC's card reader, and format it to Fat32. Reason, is that I have absolutely no idea what you have on your sd. Update.zips, Kernels, Roms, etc.
Copy your VillainRom or Revolver Rom or Taboonay Rom (or whatever rom you want to use) to your SD, then put it back in your 500.
When you flash a new rom, you boot to CWM.
Wipe User Data
Wipe Cache Partition
Goto Advanced and Wipe Delvik
I like to do each a couple of times, just to be sure.
Then go back to the previous menu, and select "Install zip from sd"
Choose your rom and install it.
All three of the above roms come with a cooked kernel so you shouldn't have to mess with kernels.
Also, if you wish to install a different cooked kernel, you only need to wipe Delvik before installing.
Also, Install the rom first and let it run for awhile before installing a kernel. Never do both at the same time.
And the final rule, if you used a backup program like Titanium Backup or any of the others, Never Ever backup and restore system files to a different rom.
But, if you want to put it back to stock, the I suppose you can use the acer recovery tool to flash a stock acer rom and flash the stock recovery image. For more info, see this thread;
http://forum.xda-developers.com/showthread.php?t=1155664

Categories

Resources