Related
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
ps. my english is not good-,-thx for read
pls help~~~~~~~/_\
Tether not works on x8 because of hw limitations
Sent from my X8 using XDA App
It works on my X8, do not use WEP key
se_gila said:
It works on my X8, do not use WEP key
Click to expand...
Click to collapse
i haven't use wep key...
wt is yr x8 version?
when i updated, it cannot run..../_\
my version is E51i ( 2.1 update1 ) (M76XX-TSNCJOLYM-53404015 ) ( 2.6.29 [email protected]#1 ) ( 2.1.1.A.0.6)
it works on my x8 im using minicm(http://forum.xda-developers.com/showthread.php?t=964223) , i would use access control making you need to tick a box on your device on the clients tab before that device gets internet. WEP does work but as i find you can't use letters in the password only numbers.
Oups !
Sorry
I have barnacle wifi tether work on miniCM nobodyatall but it does not work on CM7-65 racht... Using the same setting and method but so far no luck...
mamafuck1 said:
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
Click to expand...
Click to collapse
Mine is work. Anyway, sometimes it takes time to connect with my macbook, but it works fine. I'm using SROM V2 based on minicm (froyo).
can u tell me yr phone's detail?
version etc.
my phone's detail is ...
E51i
2.1 update1
M76XX-TSNCJOLYM-53404015
2.6.29 [email protected]#1
2.1.1.A.0.6
i really really want to share my wifi to my ipod...>_<"
hope be help........
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
deani77 said:
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
Click to expand...
Click to collapse
i've only used it on stock 2.1, miniCM and froyobread haven't tried a 2.3 ROM so can't comment but 2.1 and 2.2 work.
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
For the phone:
1. Install Barnacle
2. Make sure wifi is off then open the app, push the menu button and select "settings"
3. Scroll to the bottom, click the DHCP
4. Click "DNS 1 (optional)" and set it to 8.8.8.8 (as stated on page 1 of this post)
5. Push the back button
6. Click on the "WAN" and set it to "rmnet0" (without quotes)
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
DO NOT PUSH THE "START" BUTTON
Thats it for the phone side but if you want to do some extras, you can change the "port" in the NAT section and "gateway" in the DHCP section.
For the PC:
If you know how to view your connections, skip to step 3.
Windows XP Users:
(I'm on my Win7 netbook at work using the x10 wifi as we speak, not XP, so ill try to get this correct)
1. Click the "Start" button (or press the windows key), click on Control Panel
2. Click on "Network Connections"
For Vista/7 Users:
1. Click the "Start" button (or press the windows key)
2. Type "view network connectons" (no quotes) and press enter when it stops loading
For All Users:
3. Right click on your wireless connection and click "Properties"
4. In the box towards the middle of the Properties you should see "Internet Protocol Version 4 (TCP/IPv4)", double click it to open its properties
5. At the bottom, click the "Use the following DNS server addresses:" and set it to 8.8.8.8 (to match the phone)
6. Click "Ok" on both Property windows
Thats it. You should now be able to click the "Start" in the Barnacle app and connect. If your still not getting internet but are connected to the phone with your pc's wifi, run thru the steps again for the PC but while being connected.
Click to expand...
Click to collapse
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Sparks1337 said:
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Click to expand...
Click to collapse
ths, i am trying yr method,,,hope can help!_!
um....do you have set yr pc???
i want to connect to my ipod touch....and i don't know how to set with my ipod....
God! look at those neons at topic "WITH THAT UGLY CAPS LOCK", and I can't say it's better than your name...
As a user said before, tether doesn't work natively due to kernel limitations, with problems as yours I would advice to test another rom, or Full wipe / Fix permissions in xrec.
Sparks1337 said:
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
Click to expand...
Click to collapse
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
in this step....i have some problems
when i click Start, it show:
Data network is ready
.int file prepared
WIFI: driver loaded
WIFI: Could not set address of athwlan0 No such device
DHCP: Could not get address of athwlan0: No such device
WIFI: Could not get flags of athwlan0: No such device
NAT: waiting for local Interface
Stopped unexpectedly!
AFAIK tether is only working with android 2.2 or above
I have used Barnacle on 2.1 droid and with 13 char WEP only letters.
I have problems with it on 2.2 ROMs tho... problems with connecting to the ad-hoc its creating.
works for me in CM 1.0.0/1.0.1, and FB... have set a 10-char WEP key. not sure if this helps but make sure your WiFi is OFF when u launch barnacle
Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much
atlasbr said:
Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much
Click to expand...
Click to collapse
did you change tiwlan file for faster wifi for x8? with 802.11N ? cause I have similar problem and I think I solved
No, I haven't done anything like this... was just hoping it would work out of the box.
Can you please point me to the referred file?
Very much appreciated.
http://www.fileserve.com/file/7jqvBPU here is the link for original "tiwlan.ini" file.
move it on your sd card, then with root explorer copy it and paste it in system/etc/wifi (if there is no such folder "wifi" paste in it system/etc) then go to settings and from there delete all remembered wifi network,then reboot phone and it should help. if not change rom and then try the same.hope helped
p.s you should turn on RW or root explorer and anyway save your own tiwlan.ini file which you'll find in system/etc or system/etc/wifi.(move that on sd card and rename tiwlan1.ini or smth)
Thanks a ton! Will do this right now and will be able to report back on Mon.
atlasbr said:
Thanks a ton! Will do this right now and will be able to report back on Mon.
Click to expand...
Click to collapse
Can you connect now?? how??
From my experience i can say that 802.1x EAP (eduroam connection with cert.)for me is working only on gingerxperia v7. On diferent version(DX 12-18, GX 8-12) i cant connect. I try change files from v7 (system/etc/wifi) to another roms but it was not working (files from v7 are little diferent than in other roms). So i must say that only option for me to have eduroam connection is rom gingerxperia v7 which isnt the best nowadays...
Does anyone have a solution for this??
I have the same issue on my X10 Mini running MiniCm7 2.1.4 (Android 2.3)
Is there a way to copy files needed for wifi from a previous ROM? Android 2.1 was working OK on wifi 801.2 enterprise. So I would like to copy files from an Android 2.1 Rom (e.g. Stock rom) to my current ROM. Is this possible? Which files do I need to copy?
I tried already
system/bin/wpa_supplicant
system/bin/tiwlan_cu
system/bin/tiwlan_loader
But then I get "Wifi error" after enabling Wifi ...
hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks
This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.
Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.
what is this ?
It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.
SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]
it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4
hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok
OH YES! will test and report; long awaited!
I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T
Hello everyone,
I finally managed to solve the problem of connections
thanks
hi to everybody,
thank you for your work!!!!!!! is perfect!!!!
hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network
guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?
Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings
Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App
I use LogMeIn.apk
any solution for GB 2.3.5 ???
I've tried ad hoc on 4 different laptops and it only worked on the newer ones
I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.
yes
finally i am connected to my home adhoc wifi
I have seen many forums where android wont support adhoc wifi
there are some ways to connect in froyo,eeclair
but i am in gingerbread and made it
but i donno how i am connected did it yesterday night failed ,but today mrng i got it...
dont remember how i done it ??
Lol, VERY useful post...
Wow, this is amazing! Can you reconnect it second time? Maybe it's just coincidence...I would be happy if you could give more detail on this because I find it hard to connect to AdHoc, and fyi, i also used 2.3.6
Solution
You can use "Connectify" software which creates a Wi-Fi hotspot using your laptop (not ad-hoc). This software has a free version, just google it.
corrupt1234 said:
Wow, this is amazing! Can you reconnect it second time? Maybe it's just coincidence...I would be happy if you could give more detail on this because I find it hard to connect to AdHoc, and fyi, i also used 2.3.6
Click to expand...
Click to collapse
first of all ur device is to be rooted,then instal busybox
goto market and find WifiAdHocEnabler,instal and open it
allow superuser request verify prerequisites(settings->disable compatibility check ✓)
restart wifi
u will see a * symbol before adhoc wifihotspot connect to it
am using I9001ZSKP5 2.3.6 firmware
tried it in some custom roms's too but it didnt work out