i was using MAGLDR then i had troubles so i tried to use another boot loader for my t-mobile Hd2 which is " cLk " then i didnt understand anything and removed the phone from the usb and it powered off i tried to open it again to remove the bootloader clK and add MAGLDR again but it wont open not even screen light
so is it bricked or is it a battery problem ?
no lights no power clue .
Will it boot into your bootloader? If so, you can flash magldr again.
Sent from my HTC HD2 using XDA App
no booting it is like there is no battery inside the phone , when you press the power button nothing happens like it is dead .
midomido1 said:
no booting it is like there is no battery inside the phone , when you press the power button nothing happens like it is dead .
Click to expand...
Click to collapse
Can you enter the bootloader mode...pressing vol down and power button?If you can it wont be problem to get your hd2 work...
midomido1 said:
... i tried to use another boot loader for my t-mobile Hd2 which is " cLk " then i didnt understand anything and removed the phone from the usb and it powered off ...
Click to expand...
Click to collapse
Congratulations, you probably have just bricked your phone.
Im sorry, but pulling the cable while flashing is the most stupid move someone would ever do. If you don't understand something, then just read again and again until you fully understand before doing something reckless.
You MAY get lucky and have your phone revived, but I doubt it.
Sorry, truth sometimes hurt.
i didnt remove the cable while flashing ... i removed it when i was in clk , clk was stuck or something so i removed the cable after a while after this it wont open like it has no battery , NO BOOT LOADER NO BOOT NO LIGHT .
Check the battery pins & make sure they make contact with the battery !
and you might want to charge your battery with a wall charger (the one where u can charge battery without phone - if u have this) or borrow ur friends clk installed hd2 and charge ur battery...
it can be a 0 battery charge problem also.
Marvlesz said:
Check the battery pins & make sure they make contact with the battery !
Click to expand...
Click to collapse
OH MY GOD !!
I used a wall charger and it didnt work and then i read your post i went to the phone i checked it out , and i was shocked that i didnt notice this the pins were very .. not good and i fixed it and it worked
thank you
and thanks to everyone who replied .
Related
hi to all
my Hd2 is dead today for no reason . i try to put the cellphone into boot mode or hard reset or soft reset but no success. with usb cable plug nothing happened.
my battery is fully charged . the cellphone is brand new and used for only 2 weeks . i have try with power supply to power on and the result is same.
please help me to solve this problem . i am confused .
thank you in advance !
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
samsamuel said:
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
Click to expand...
Click to collapse
you sound scarier than sherlock holmes
hehe, secret service interrogation trained.
samsamuel said:
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
Click to expand...
Click to collapse
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
dezmelody said:
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
Click to expand...
Click to collapse
what were you doing when it went dead?
Trying to flash a ROM or a radio?
Take the battery out and make sure the connectors are not bent (esp. the middle one).
dezmelody said:
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
Click to expand...
Click to collapse
lol, still no hard facts,,,, by model i meant is it a tmous(green send key, red end key, says t mobile under earpiece) or a regular hd2(all keys white)?
what's the last thing you did? did you flash something? (full filename please)
it rather sounds like you have a tmous and have flashed the wrong radio and bricked it, but without any facts thats just a wild guess. that or bent battery pin.
samsamuel said:
lol, still no hard facts,,,, by model i meant is it a tmous(green send key, red end key, says t mobile under earpiece) or a regular hd2(all keys white)?
what's the last thing you did? did you flash something? (full filename please)
it rather sounds like you have a tmous and have flashed the wrong radio and bricked it, but without any facts thats just a wild guess. that or bent battery pin.
Click to expand...
Click to collapse
my phone is regular with no contract.
i have used as common , playing music and recieve a bluetooth file and suddenly phone dies.
i wanna to flash but no sucess with anything . in the other hand i cant even put the phone on boot loader mode at all.
now i want to go into boot loader to flash my phone.
dezmelody said:
my phone is regular with no contract.
i have used as common , playing music and recieve a bluetooth file and suddenly phone dies.
i wanna to flash but no sucess with anything . in the other hand i cant even put the phone on boot loader mode at all.
now i want to go into boot loader to flash my phone.
Click to expand...
Click to collapse
Are you putting the phone on charge when you attempt to load it into the bootloader?
How are you attempting to get it to the bootloader?
nrfitchett4 said:
what were you doing when it went dead?
Trying to flash a ROM or a radio?
Take the battery out and make sure the connectors are not bent (esp. the middle one).
Click to expand...
Click to collapse
not at all. just did common work .
im sure about battery oin and connection because i have tested with power supply either.
rp-x1 said:
Are you putting the phone on charge when you attempt to load it into the bootloader?
How are you attempting to get it to the bootloader?
Click to expand...
Click to collapse
battery is fully cahrged and yes , try to connect charger .
volume down + power
volume down + volume up + power
is it correct ?
dezmelody said:
battery is fully cahrged and yes , try to connect charger .
volume down + power
volume down + volume up + power
is it correct ?
Click to expand...
Click to collapse
HOLD volume down + TAP AND RELEASE power = bootloader (do it with battery cover off)
HOLD volume down + HOLD volume up + TAP AND RELEASE power = Hard Reset
samsamuel said:
HOLD volume down + TAP AND RELEASE power = bootloader (do it with battery cover off)
HOLD volume down + HOLD volume up + TAP AND RELEASE power = Hard Reset
Click to expand...
Click to collapse
nothing happened with none of this methods.
phone still dead and lcd remain black .
can i use another method for flash phone . i mean direct flash or something ?
dezmelody said:
my phone is regular with no contract.
Click to expand...
Click to collapse
Still no model/last rom flashed info....
Please answer yes or no, , , is the 'send' key green?
samsamuel said:
Still no model/last rom flashed info....
Please answer yes or no, , , is the 'send' key green?
Click to expand...
Click to collapse
YES , it is
Thank you.
That means then that you have a tmous phone, and it sounds like you have flashed an incompatible radio, which has killed (no fix) your phone. However, we cant be 100% sure of that till you give us teh full name of teh last rom/radio you flashed.
(had you answered that in post 8, you would have had 4 hours to cry by now, and would be feeling slightly better, sadly i fear the despair is yet to hit )
Non-compatible Radio on TMOUS phone. Killed it for sure. My condolences. Not even the warranty can save your phone...
otacon said:
Not even the warranty can save your phone...
Click to expand...
Click to collapse
actually several people have sent them back no problem. The phone wont start, so they cant prove hspl.
Just shows how dead it is, hehe
samsamuel said:
Thank you.
That means then that you have a tmous phone, and it sounds like you have flashed an incompatible radio, which has killed (no fix) your phone. However, we cant be 100% sure of that till you give us teh full name of teh last rom/radio you flashed.
(had you answered that in post 8, you would have had 4 hours to cry by now, and would be feeling slightly better, sadly i fear the despair is yet to hit )
Click to expand...
Click to collapse
otacon said:
Non-compatible Radio on TMOUS phone. Killed it for sure. My condolences. Not even the warranty can save your phone...
Click to expand...
Click to collapse
samsamuel said:
actually several people have sent them back no problem. The phone wont start, so they cant prove hspl.
Just shows how dead it is, hehe
Click to expand...
Click to collapse
hey guys as i told you before this phone is brand new and i used as common.
did not flash , nor hard reset. just after a while suddenly phone dead.
now i want to flash it with proper rom file and back it live. can i ?
The problem is you can't even get the phone to start... Send it back for warranty. That's your best (and only) option for this moment...
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
When you turn on your phone what happens? What screen dow it take you to? What does it say when trying to run android? .......and for future notice this is the comnplete wrong section for this....and some more info regarding device, hspl, radio would be helpful too.
oh word? ... try this
1..first download the official wm 6.5 rom from tmobile or http://www.htchd2forum.com/general-...SID=799c9ce6abe4e3ddc05368f8432db509#msg22469
2...second remove the SD card and connect the phone to ur computer
3...hold the down volume + power buttom till u see 4 colurs and them run the tmobile official rom... let me know what happens
it doesn't boot up anymore, I will post again when I have it booting again.
All have to do is to download an htc official rom and connect ur Htc hd2 to
computer and flash it
Good luck
Sent from my HTC HD2 using XDA App
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
connect the phone to ur computer
hold the down volume + power button till u see 4 colors and them run the tmobile official rom... let me know what happens
In the name of the wee man.
Post this in the right bloomin' topic.
The Mods have just spent an age reorganising this whole corner of XDA and what do you do?
Bugger it all up.
Well done.
At least you are consistent, you buggered your phone and the forum. Bravo.
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
Can you seriously follow anyone's instructions given man? Quit trying to boot the phone. Connect the phone with your PC via the USB cable. Hold down the "volume down" key and the "power" key at the same time. Tell us if you see the tri colored screen.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
Have you checked the battery contacts? They bend very easy, and the symptoms you describe are exactly those of that. If they are bent, VERY, OH SO VERY CAREFULLY straighten them up. If one or more are broken, I hate to tell you this, but you need to buy a new phone.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
I think you have wrongly done the Clock Work Mod which shows the 123Fatal Hit error and ur hd2 remains stuck there. Your HD2 is not crashed at all just charge it with an external charger then go to bootloader by pressing n holding Volume Down key and Power button until you the triple coloured screen, then connect your data cable to HD2 and flash it with a stock windows mobile rom so it will restore ur hd2 and after that u can install nand rom on it by following each and every step mentioned in tutorials here. Whenever I select boot AD SD after flashing partition layout I always get 123Fatal error now I don't understand what the problem is....If someone has a solution for this problem please reply in this thread as I don't want flashing through DFT method.
how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...
donkeanu said:
how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...
Click to expand...
Click to collapse
What did you do right before it was dead?
Did you change the Radio?
Might be battery related too.
Try to find someone else with an HD2 and swap the battery to try.
help
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
You cant, you've bricked it. Only way is to JTAG or replace board as far as I know.
sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
If you have flashed a EU/Asian Radio/stock ROM on a T-Mous device, than it's broken.
kurt-willems said:
What did you do right before it was dead?
Did you change the Radio?
Click to expand...
Click to collapse
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing
Don-Maco said:
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing
Click to expand...
Click to collapse
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.
T-Macgnolia said:
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.
Click to expand...
Click to collapse
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
note i cant flash the rom cuz it hangs at 29% then nothing happens for like 10 minutes! then the phone turns itself off! and it just wouldn't budge! i never flashed through sd card so i really would like the exact steps to avoid errors! i dont wanna screw 500u$d
Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions. If they are then you might have an internal hardware problem. But don't just take my word for thag cause I am no expert when it
comes to the hardware side of the HD2.
Edit: I just read your other post here is a link to the thread on flashing via SD card. Read the first post for detailed instructions on flashing via SD card
heey thanks man i'll try that as soon as i get from work and see if that helps!
T-Macgnolia said:
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions.
Click to expand...
Click to collapse
Thanks for that tip, it solved my problem: the middle pin wasn't in proper position.
So I kinda new here and searched for similar threads with the same problems as i got , so far no success .
Heres all my story :
I have got HTC HD2 not long and I have installed NAND ROM Andriod on it ( it was installed from the SD card )
Phone worked great and evrything was nice till yesterday when my phone touch screen had stopped working so i decided to install the same OS ( Windows Mobile 6.5 ) that i recived it with , to exchange for new HD2
So i have tired to install WM6.5 , here what i have done :
I have downloaded this rom : World Wide English (WWE) 1.66.405.2
from here : http://forum.xda-developers.com/showthread.php?t=623283
I turend the phone off and opened the Bootloader screen , connected the USB cable and run the .exe rom file
It have finished installing and and phone turned off after that i pluged off the cable and tried to turn the phone on but it dont turn on at all even bootloader screen dont turn on , cant do anything with it
as i understood its briked now ? or its not?
looks like i forgot to ActiveSync before I started instaling the ROM
and now phone dont do anyhing at all
Here's what i had before i tried to install MW6.5 back :
In bootloader screen : PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
R 2.15.50.14
and also installed DFT MAGLDR Bootloader at the end
and then loaded some NAND ROM from the forum
So now my phone birked? if no is there any way to fix it?
Do i still got Garenty on it and i can exchange it ( as my touch screen is not working and now phone dont even start )
What should i do pelase help me
Is it a tmous hd2? (Red end key green send key) if yes then yes its bricked, the radio in that non-tmous stock rom killed it. JTAG or new mainboard needed.
If no, check the battery pins.
samsamuel said:
Is it a tmous hd2? (Red end key green send key) if yes then yes its bricked, the radio in that non-tmous stock rom killed it. JTAG or new mainboard needed.
If no, check the battery pins.
Click to expand...
Click to collapse
no its the normal HTC HD2 , buttons White designs T8585 HD2
forgot to tell somthing :
When i connected the phone to the pc i didn't ActiveSync ,
i just turend phone off then turn on bootloader and conencted via cable and turned on the exe file
and it started installing got to 100%
then said it completed succesfuly(in the computer) and phone turned off and since then it dont turn off or recat for cable connection or charging
also i conected the phone via USB cable to the PC then i pluged the battery and my Win7 tried to install some drivers ( it also treid to install them after it finished installing the rom )
A day have past
Please friends help me !!! :[
also i have noticed when i put the battery in and try to turn on bootloader
by presing Turn off button and Volume down
the phone makes some sound
but very small/minor vibtare or sortof
(only if i put my ear on the phone xD i can hear it)
please help me
HTC T8585
alb3553 said:
Please friends help me !!! :[
also i have noticed when i put the battery in and try to turn on bootloader
by presing Turn off button and Volume down
the phone makes some sound
but very small/minor vibtare or sortof
(only if i put my ear on the phone xD i can hear it)
please help me
HTC T8585
Click to expand...
Click to collapse
Is it able to do off-mode charging? if so, leave it to charge and then take battery out, put it back in and try going into bootloader mode again.
Moon2 said:
Is it able to do off-mode charging? if so, leave it to charge and then take battery out, put it back in and try going into bootloader mode again.
Click to expand...
Click to collapse
I dont see the red light as it need to be when it charging
but let me try im 99% sure bootloader wont satart
Hmmm, so its gotta be either a power issue, a random death,(hd2s are starting to age, and they've never been totally robust hardware wise) or a flash that went so wrong it fried the firmware totally.(I'm guessing without rereading your previous posts that the drivers the PC tries to find are "Qualcomm cdma blahblah" or something similar? Often seen when a phone needs a jtag)
Only suggestions I can offer are
Battery out, USB in and on wall charger, and then put battery in,
take a really good look at the battery pins,
perhaps take a voltmeter to the battery
try another battery, try your battery in another hd2,
alb3553 said:
I dont see the red light as it need to be when it charging
but let me try im 99% sure bootloader wont satart
Click to expand...
Click to collapse
Sorry to tell you that your phone is bricked :/ what I did is I just called T-Mobile and told them something weird happened to my phone and they sent a replacement to me lol
Sent from my GT-I8150 using XDA App
Hello guys.On polish sites about android nobody can help me.
Yesterday I received the repaired phone. repaired the touch screen.now i dont have on nand or nativesd the android system.when I turn on bootloader theres no SERIAL.i I have another thing when I unplug the phone from the cable, the phone turns off.
now i have magldr v1.13 and no ideas what next.
please help me.
Sine you are able to view MAGLDR menu means your phone is ready to flash custom ROM's. Select your OS Android or Windows Phone and follow the Instructions mentioned in the ROM thread.
Keep the cable connected to PC until you flash the ROM or flash the CMW/TWRP recovery after you can charge phone with checking the charging status.
Sent from my NexusHD2 using xda premium
can you help me with this ?
im outta ideas.
i have all this programs : hdd2toolkit and hspl is right 2.08
[/COLOR]
Matiaveli said:
when I unplug the phone from the cable, the phone turns off.
Click to expand...
Click to collapse
usually means bent battery pin, or occasionally a bad battery.
someone told me thats happening when my battery is overloaded ? (not fully charged sorry for enhlish)
Matiaveli said:
can you help me with this ?
im outta ideas.
i have all this programs : hdd2toolkit and hspl is right 2.08
Click to expand...
Click to collapse
Matiaveli said:
someone told me thats happening when my battery is overloaded ? (not fully charged sorry for enhlish)
Click to expand...
Click to collapse
samsamuel said:
[/COLOR]
usually means bent battery pin, or occasionally a bad battery.
Click to expand...
Click to collapse
How was the battery condition before you gave for screen replacement. If it was good before you need to check you got existed battery from the phone repairer.
You can easly come to know whether the battery is charging or not from CMW Recovery menu,
So flash some recovery using HD2 toolkit.
Use MAGLDR Repartition menu to flash some (250 with 5 cache) recovery after done go to AD recovery from MAGLDR menu and check the battery status.
maybe i dont have drivers cause when i choose usb flasher in magldr nothing happen.
wait usb...
i know it must be
wait usb...usb
can you show me drivers to HD2 for windows 7 ?
HD2 Toolkit
Matiaveli said:
maybe i dont have drivers cause when i choose usb flasher in magldr nothing happen.
wait usb...
i know it must be
wait usb...usb
can you show me drivers to HD2 for windows 7 ?
Click to expand...
Click to collapse
Look into this thread...http://forum.xda-developers.com/showthread.php?t=1601664
HD2 Toolkit itself have an option to download all the Required drivers from Internet based on you PC Requirement. (Click Download Drivers button at bottom right)
I dont know why but I unistall everything with HTC in my computer,and when i plugg usb to hd2 pc find my phone !
I use hd2toolkit,hspl,clk,and finally install android to NAND by aroma.
but know is the next problem.
my phone starts to bootscreen and restert.
one time hes installing aplications.I think everything will be ok now.
but restart..next bootscreen and android works !
i chose language and click next and.. restart !
whats going on ?
now hes restarting when is HTC on screen.
Which ROM you used it looks you have selected low nand partition while flashing the ROM.
Give me ROM details and recovery you used.
Sent from my NexusHD2 using xda premium
im used this rom
http://forum.xda-developers.com/showthread.php?t=1434860
but version 2.8 not 2.9
i think problem is with battery or charge jack.
now phone is normal running but when i unplugg him from contact he will turn off
Good to hear you complete flashing ROM and you are in to your phones android Os.
if you see the charging indication when you connect to power outlet ot PC then it is battery issue.
Sent from my NexusHD2 using xda premium
OK. tomorrow i will go to service where i repair touch screen and i will see what happen when i use new battery.
for now i THANK YOU SO MUCH
if I have still problem i will contact you PM if you mind.
Never mind Sharing knowledge is always help full. You welcome always.
Sent from my NexusHD2 using xda premium
Matiaveli said:
my phone starts to bootscreen and restert.
Click to expand...
Click to collapse
typical symptom of a bent battery pin,,,,
i was today to check my phone on other battery.
the same thing as on my battery.
bent charge pin ? he said he'll call tomorrow. we'll see if there is a problem with charge pin .
i'll post tomorrow. thank guys for help.
youre the best.
greet from Poland.