Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from installing this ROM.
Features:
Completely Stock
Deodexed, Zipaligned
Rooted
APN config from Apex
Home haptic feedback added with proper key mapping for captivate
Ad blocking using hosts file
DC 4.0 JVS kernel
XXJVS modem
Init.d scripts from Apex
SQLite3
Download Link: http://www.mediafire.com/?174rtk07thn9eni
You need to be on GB bootloaders before flashing this.
Credits:
Faryaab for stock base - Awesome --> He deserves the credit for this, so thank him before thanking me
MikeyMike01 for home haptic fix for I9000 ROMs - The best
Samsung for leaking build after build after build -
I may have to leave Pinnacle for a little test.
Is it to early to ask about the battery (joking)
Will it get me to leave miui? Please, not another kh 3 bomb?
Sent from the frozen tundra known as Canada.
tkjeeper said:
Will it get me to leave miui? Please, not another kh 3 bomb?
Sent from the frozen tundra known as Canada.
Click to expand...
Click to collapse
Kh3? Its stock XXJVS.
Too Fast Too SERIOUS 6: Watsa's Legend
watsa said:
Disclaimer: I am not responsible for loss, damages or any other kind of issue that can arise from installing this ROM.
Features:
Completely Stock
Deodexed, Zipaligned
Rooted
APN config from Apex
Home haptic feedback added with proper key mapping for captivate
Ad blocking using hosts file
DC 4.0 JVS kernel
XXJVS modem
Init.d scripts from Apex
SQLite3
Download Link: Uploading....
You need to be on GB bootloaders before flashing this.
Credits:
Faryaab for stock base - Awesome
MikeyMike01 for home haptic fix for I9000 ROMs - The best
Samsung for leaking build after build after build -
Click to expand...
Click to collapse
Watsa, you're a beast!
Sent from my SAMSUNG-SGH-I897 using XDA App
What are the major differences between JVR and JVS?
I can just flash this over JVQ Continuum 6.2.1 correct? Nothing special as long as I'm on GB bootloaders right. Also.... is the reverse true for going back to a 2.3.4 ROM if soemthing should arise with instability? Just covering my ass in case of a bad flash or something.
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
watsa said:
Samsung for leaking build after build after build -
Click to expand...
Click to collapse
They should leak before build just once is enough
baghera1979 said:
I can just flash this over JVQ Continuum 6.2.1 correct? Nothing special as long as I'm on GB bootloaders right. Also.... is the reverse true for going back to a 2.3.4 ROM if soemthing should arise with instability? Just covering my ass in case of a bad flash or something.
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes thats why this is CWM flashable, and since it has DC kernel u dont lose CWM to go back to you rom of choice
watsa said:
Yes thats why this is CWM flashable, and since it has DC kernel u dont lose CWM to go back to you rom of choice
Click to expand...
Click to collapse
Thank you much. Gonna give it a try
Sent from my SAMSUNG-SGH-I897 using XDA App
thank you! Downloading and give a try!
Am I understanding correctly? J is i9000 and K is i897?
getinlost said:
Am I understanding correctly? J is i9000 and K is i897?
Click to expand...
Click to collapse
Correct. As usual captivate builds are a version behind I9000. When we get KH3 2.3.4 I9000 gets JVS 2.3.5
Hopefully this means were gonna see Apex with a JVS base.
Also is there any changelog that mentions changes between JVR and JVS.
Also I've heard the JVS modem has 850 enabled out of the box is this true?
watsa said:
Correct. As usual captivate builds are a version behind I9000. When we get KH3 2.3.4 I9000 gets JVS 2.3.5
Click to expand...
Click to collapse
If that is the case why the need for GB loaders vs. i9000?
I am only curious. have a i897.
getinlost said:
If that is the case why the need for GB loaders vs. i9000?
I am only curious. have a i897.
Click to expand...
Click to collapse
I said GB bootloaders. you can have either of I9000 GB or captivate GB bootloaders
I think i have to buy a couple of capy´s to follow Watsa dev´s that way i can keep all the rom´s
Nice work !!!
watsa said:
I said GB bootloaders. you can have either of I9000 GB or captivate GB bootloaders
Click to expand...
Click to collapse
Ouch. I will come back to this when sober. ;-)
Thanks for educating a noob.
Watsa,
you now im noob on this things
What´s the diferencen between this rom and Apex ?
Related
Hi
You know maybe already some of my work even if this is my first post in the captivate forums.
Let me introduce you the stock+Voodoo stable kernels.
Those are built injecting Voodoo lagfix inside an original Samsung kernel built specifically for Captivate.
It comes with extensions like "su" and also ClockWorkMod recovery as default recovery.
Voodoo lagfix converts /system, /cache, /dbdata and /data to Ext4 with optimized parameters for speed but also guaranteeing data integrity.
Also, it configures the write behavior of Linux to prevent lag from happening, plus apply some memory management providing a better balance than stock settings.
Designgears help a lot during the development of this new stable release, testing endlessly new experimental code I was writing Thanks!
What it's not: voodoo sound, voodoo sharpness. Those improvements needs kernels built from sources.
Froyo only versions for now, I'll build Eclair version later.
update.zip you can flash with ClockWorkMod recovery (not 2e or 3e)
UCJJ4+Voodoo http://dl.project-voodoo.org/stock+...k+Voodoo-Froyo-I897-UCJJ4-unsigned-update.zip
UCKB1+Voodoo http://dl.project-voodoo.org/stock+...k+Voodoo-Froyo-I897-UCKB1-unsigned-update.zip
.tar you can flash with Odin
UCJJ4+Voodoo http://dl.project-voodoo.org/stock+Voodoo/tarballs/stock+Voodoo-Froyo-I897-UCJJ4.tar
UCKB1+Voodoo http://dl.project-voodoo.org/stock+Voodoo/tarballs/stock+Voodoo-Froyo-I897-UCKB1.tar
Thanks to slm4996 who was the first to test this kernels
Nice work! Testing now. Does this include the sound and color fixes?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Working great. Flashed over perception build 8 with ljl3 modem
slm4996 said:
Working great. Flashed over perception build 8 with ljl3 modem
Click to expand...
Click to collapse
Hehe thanks for the report - I updated the first post.
slm4996 said:
Working great. Flashed over perception build 8 with ljl3 modem
Click to expand...
Click to collapse
Do voice calls work? This is Captivate kernel, thats a telus modem for Vibrant...
Sent from my GT-I9000 using Tapatalk
Great to see CWM integrated
Sent from my GT-I9000 using Tapatalk
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
slm4996 said:
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
Click to expand...
Click to collapse
Ah, OK
Sent from my GT-I9000 using Tapatalk
slm4996 said:
Voice calls do not, I was reporting on the kernel functionality.
I'm switching back the radio now.
Click to expand...
Click to collapse
Voice calls absolutely do work. You clearly had some other issues.
Sent from my brain using Thumbs 2.0.
icezar1 said:
Do voice calls work? This is Captivate kernel, thats a telus modem for Vibrant...
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Well, this is a Captivate modem, designed to work with Captivate more than Frankenstein phones
I did the same for Vibrant kernels if you prefer: http://forum.xda-developers.com/showthread.php?t=870480
The main target for these kernel are users using "standard" ROM, as most user do, with a kernel they can trust.
Guys, decide
Sent from my GT-I9000 using Tapatalk
let me se if i get it this is to be used with stock ROMS only? or i can be used with custom roms like perception, cognition & axura??
Cog and Auxura would probably be ok. I haven't tried it yet though. The "stock" he is referring to, I think, is Captivate based Froyo Roms (ji6, jj4).
do it work with JPU roms like Darky 5.2?
Does not work in axura
is not working with axura 2.2 i have no audio in phone call i can't heard nothing
just in case it matters i have JL3 modem with axura 2.2 any suggestions?
i used the odin version and flash it in pda section of odin is that the correct way to do it?
JEANRIVERA said:
is not working with axura 2.2 i have no audio in phone call i can't heard nothing
just in case it matters i have JL3 modem with axura 2.2 any suggestions?
i used the odin version and flash it in pda section of odin is that the correct way to do it?
Click to expand...
Click to collapse
That is the correct way to flash the kernel. Have you tried reflashing the modem?
majinzen said:
That is the correct way to flash the kernel. Have you tried reflashing the modem?
Click to expand...
Click to collapse
just tried that waiting for boot i will let you know!!!
not working going back to sentirons 1.4.5 sorry!!!!!!!!!!
isn't axura based on vibrant jk2.. -___-;..
this kernel is FOR STOCK FROYO FOR CAPTIVATE.
darkamikaze said:
isn't axura based on vibrant jk2.. -___-;..
this kernel is FOR STOCK FROYO FOR CAPTIVATE.
Click to expand...
Click to collapse
im just trying same kernel but for vibrant in my cappy with axura i let you kn ow if it worked!
it worked BUT the volume buttons at least in CWM are inverted up=down down=up power button working fine for ok
no i only need where to change the soft buttons to match the cappy ones i have them inverted back=home home=back vol up=down down=up and had to turn off the autorotation any suggestions?
We are not responsible for what happens to your phone. Always make a nandroid before using.
This is Adrynalyne's first kernel for the HTC Thunderbolt
This should work with any rooted sense rom currently available, but as stated above always make a nandroid to be sure
Latest Version 2.0
-smartass is default, tweaked, etc
OldLatest Version is 1.9
-ext4 support --nfs support removed for now to cut down kernel size (wasn't loading as modules) --on demand default governor until tweaking of smartass is perfected. This will make the benchmark folks happy --tweaked smartass --other little tweaks
OldLatest Version is 1.8
-Fixed 2D rendering, improved quadrant
-1.8--removed gps+ patch because it sucked ass
OldLatest Version is 1.7
-Changed up higher end voltages
OldLatest Version is 1.6 (This does not mean overclocked to 1.6 people )
Includes:
-perflock disabled
-undervolt
-swap
-neon and cortex opt
-rndin-gpu+ patch
-conservative, interactive and smartass govenors.
-standard slots no OC
-Changed up higher end voltages
-Powersave govenor added
-Fixed 2D rendering, improved quadrant
-ext4 support --nfs support removed for now to cut down kernel size (wasn't loading as modules)
-smartass is default, tweaked, etc
Find it in RM under MrBobrowitz or download the file below
Download Adrynalyne's 2.0
Download Adrynalyne's 1.9
Download Adrynalyne's 1.8
Download Adrynalyne's ver 1.7
Download Adrynalyne's ver 1.6 Kernel
INSTALL VIA CLOCKWORK!
sweeeeeeeeeeeeeeeeeeet
very nice work here fellas very nice
and the Rom Manager was a nice touch too
I guess this means CWR doesn't have a problem with flashing kernels anymore?
Bxsteez said:
I guess this means CWR doesn't have a problem with flashing kernels anymore?
Click to expand...
Click to collapse
Was it even updated?
Been running this kernel since I grabbed it from irc. Thank you, adrynalyne. This is fantastic. And thank you, Mrbobrowitz.
Sent from my ADR6400L using XDA App
Nope. . Flash away! But don't forget your backup!
i thought clockwork was having issues flashing kernels ?
psufan5 said:
Was it even updated?
Click to expand...
Click to collapse
There is no update to my knowledge. I could be wrong.
Is there any fix to CWM breaking the ability to charge the phone while its off?
JustinD2473 said:
i thought clockwork was having issues flashing kernels ?
Click to expand...
Click to collapse
clockwork didnt really have an issue
the problem was putting together the correct zipable package
psufan5 said:
Is there any fix to CWM breaking the ability to charge the phone while its off?
Click to expand...
Click to collapse
i wish but give it time im sure kush will update and fix that while the TB is still pretty new
so if I flash this what benefits does it have? Sorry for the noob question I never flashed a kernal except for when I had a fascinate.
ckochinsky125 said:
so if I flash this what benefits does it have? Sorry for the noob question I never flashed a kernal except for when I had a fascinate.
Click to expand...
Click to collapse
the benefits are listed in the first post
and flashing good kernels are a must
DS36 said:
the benefits are listed in the first post
and flashing good kernels are a must
Click to expand...
Click to collapse
Not really, all it says is what is included and I don't know what he is talking about in what is included except undervolt.
Awesome! Just got done flashing, went smooth as silk.
Sent from my ADR6400L using XDA App
Thanks fellows.....very nice.
NO way to flash this without CWM is there lol... I dont wanna put it on because i like charging my phone when its off.
psufan5 said:
NO way to flash this without CWM is there lol... I dont wanna put it on because i like charging my phone when its off.
Click to expand...
Click to collapse
Correct me if I'm wrong, but if you're really opposed to CWM, couldn't you just unzip the package, flash the kernel with fastboot and push the file in system/lib using adb?
Anyway, Smartass governor? Wow, having had a Droid X before I feel like I've really been out of the loop. Read up on it, I like it. It's good to have a kernel that I feel I can relate to.
Still charges in cwm when off just displays cwm recovery screen if fastboot is not enabled.
Sent from my ADR6400L using XDA Premium App
Ok, going to start a new thread, the old one is soooo messy, and with all the leaks it might just be cleaner this way.
It appears that this kernel will also run on KJ2. If you get stuck on boot or a bootloop try clearing dalvik.
+ Juwe11's LMK settings
+ Tweaked Kernel Scheduler Settings
+ Tweaked IO Scheduler Settings
+ Tweaked Ondemand Governor/Sampling Rate
+ Tweaked Readahead to 512 on internal/external SDs (mmcblk blocks)
+ init.d support thanks to mtcarey
+ Custom Boot Animation
Odin flashable with clockwork, init.d, boot animation support and tweaks
Download KJ1 kernel 3
Download KJ2 kernel 3
Download KJ3 kernel 3
To get init.d support, you must first flash the odin version above. Then the init.d version from recovery. No longer need to do the double flash for init.d support, and S99complete is no longer needed!
CWM flashable with clockwork, init.d, boot animation support and tweaks
Download KJ1 kernel 3
Download KJ2 kernel 3
Download KJ3 kernel 3
You can flash the normal boot animations, they all seem to work as advertised. If you remove /system/media/bootanimation.zip it will revert back to the stock boot animation.
init.d support: you may need to create /etc/init.d then make the permissions executable on the scripts in init.d.
reserved 10char
Running for ....?
Rom: Apex, Fasty, Epic, Pinna, ... or Based: JVS, JVT, KI1/2?
Awesome, great work again !!
Downloading... I haven't even had time to flash the kj1 leak yet, lol.
What would I do with my weekends without these leaked firmwares...
Init.d support?
Sent from my I897 using xda premium
boog said:
Ok, going to start a new thread, the old one is soooo messy, and with all the leaks it might just be cleaner this way.
This should tie you guys over for a bit!
Odin flashable with clockwork and tweaks. More to come
Download KJ1 kernel 1
Click to expand...
Click to collapse
That was fast!!!!
Where is the ext4 lagfix
Sent from my SAMSUNG-SGH-I897 using xda premium
Damn dude. It dropped like three hours ago! Be patient! ... thank you boog!
Sent from my SAMSUNG-SGH-I897 using XDA App
JKenvin said:
Running for ....?
Rom: Apex, Fasty, Epic, Pinna, ... or Based: JVS, JVT, KI1/2?
Click to expand...
Click to collapse
for the kj1 leak, just like the topic states
b-eock said:
Init.d support?
Sent from my I897 using xda premium
Click to expand...
Click to collapse
Working on it now
msprag13 said:
Where is the ext4 lagfix
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
I don't think I am going to do lagfix. It is much harder, leaves no/little room to tinker, and rfs feels plenty fast with the ondemand tweaks included in the kernel.
You BOOG are the greatest!
Sent from my I897 using xda premium
op updated
Can anyone keep up with the updates, yup, Boog can
Sent from my SAMSUNG-SGH-I897 using xda premium
I got the extended power menu ready, but I was going to let somebody else do the copying and pasting this time.
crt60 said:
I got the extended power menu ready, but I was going to let somebody else do the copying and pasting this time.
Click to expand...
Click to collapse
The rom has to be deodexed in order for it to work, correct?
I seem to just stick to the odexed stock rom while tinkering with the kernel.
boog said:
The rom has to be deodexed in order for it to work, correct?
I seem to just stick to the odexed stock rom while tinkering with the kernel.
Click to expand...
Click to collapse
Yep, it needs to be deodexed
My ROM is odexed too. Nice job getting this out already boog.
boog said:
I seem to just stick to the odexed stock rom while tinkering with the kernel.
Click to expand...
Click to collapse
Do you run into problems while testing on a deodexed ROM? Probably a good idea anyway.
crt60 said:
Do you run into problems while testing on a deodexed ROM? Probably a good idea anyway.
Click to expand...
Click to collapse
Just really trying to make sure I leave out any chance of something in the rom giving me a problem that could make me chase my tail. And I am boring, stock suits me well, I just tweak everything to my own liking.
crt60 said:
Do you run into problems while testing on a deodexed ROM? Probably a good idea anyway.
Click to expand...
Click to collapse
From what I've read the only reason to deodex a ROM is to easily theme it. Odexed ROMs run smoother and load quicker, but require a LOT more to theme then deodexed roms. At least according to what I've read. Haven't been really using odexed ROMs to notice a difference yet.
JKenvin said:
Running for ....?
Rom: Apex, Fasty, Epic, Pinna, ... or Based: JVS, JVT, KI1/2?
Click to expand...
Click to collapse
Cho bản Leak UCKJ1 mới nhất đó Kevin ơi, chả chịu khó update gì cả
http://www.androidauthority.com/and...d-value-pack-samsung-galaxy-s-gt-i9000-44229/
this is the new value pack i jest found it can someone mod or port (i think thats the word we use) it so the vibrant will work for it i have not even tryed it i want a updated rom that is not ics i want something else for now i am bored of ics lol
XXJVU？
i foud a XXJVU, but with JW1 Kernel
SpeedyROM[VER4].XXJVU:
http://bbs.lidroid.com/t-85664-1-1.html
---------- Post added at 03:24 AM ---------- Previous post was at 03:23 AM ----------
i have be waiting for XXJVU Kernel for T959.
if somone can change the codeing to t959 then it would be perfect
Guys, not to ruin your parade, but theres a few tutorials already out on how to port I9000 roms to T959(us)
and We have a stable working versions of ICS (onecosmic and ICS Passion to be specific)
I'm sure this could help, but It won't let me go to the link you posted, it isn't loading. I'll try later.
edit:
This isn't even ICS... It's just features for GB, this can improve GB roms with new features though.
Features:
Face Unlock from Galaxy Nexus
Galaxy Note Lockscreen
Galaxy S2 Photo Editor
Improved Camera App
Ability to take picture while taking videos
Fast auto-rotation response
New Lockscreen sounds
Enhanced stock browser
Smoother and faster Gallery 3D
Higher FPS rate in 3D
Minor changes in the UI
yes i know it is not ics it is gbread i like gbread bc it is allot more collorfull. if ics had allot fore collars then i would love it more then i alredy do
UPDATE: 17/01/12:
VIB.JVU_VNBuild2.zip
Link: (163mb)
http://www.mediafire.com/?j2mghfowqhjuyew
- GB: JVU - 2.3.6
- kernel: talon
- modem: UVKB5
- other app
Sent from my SGH using XDA App
huuhiep175 said:
UPDATE: 17/01/12:
VIB.JVU_VNBuild2.zip
Link: (163mb)
http://www.mediafire.com/?j2mghfowqhjuyew
- GB: JVU - 2.3.6
- kernel: talon
- modem: UVKB5
- other app
Sent from my SGH using XDA App
Click to expand...
Click to collapse
what is this
samwest39 said:
what is this
Click to expand...
Click to collapse
Rom JVU port for vibrant
http://www.tinhte.vn/f280/galaxy-vibrant-rom-tieng-viet-update-17-01-12-vib-jvu_vnbuild2-598665/
Sent from my SGH using XDA App
huuhiep175 said:
Rom JVU port for vibrant
http://www.tinhte.vn/f280/galaxy-vibrant-rom-tieng-viet-update-17-01-12-vib-jvu_vnbuild2-598665/
Sent from my SGH using XDA App
Click to expand...
Click to collapse
Where can I find more info on this rom??
EDIT:Went to that link but I can't understand $h!t!!!!!!!!
is this the value pack
ejamin73 said:
Where can I find more info on this rom??
EDIT:Went to that link but I can't understand $h!t!!!!!!!!
Click to expand...
Click to collapse
- JVU stock
- mod theme
- add power menu, lockscreen, toggle
- add more app
My english too bad ! Sorry
Sent from my SGH using XDA App
i flash this rom and it dose not work what are the steps i odin lin 3 and flash wipe what am i missing\
samwest39 said:
i flash this rom and it dose not work what are the steps i odin lin 3 and flash wipe what am i missing\
Click to expand...
Click to collapse
Try Flash lidroid kernel 1.7
Sent from my SGH using XDA App
i flash this and it should work
the main file dose not falsh all the waay through there is a problem wit hthe download i thinkj
this is not a port for the vibrant. it is a captivate port .it have kb5 modem you just have edit the build.prop and fix the APN.other than that it is a good rom.
Richcar said:
this is not a port for the vibrant. it is a captivate port .it have kb5 modem you just have edit the build.prop and fix the APN.other than that it is a good rom.
Click to expand...
Click to collapse
so how do i change the modum it says .bin how do i change it
Richcar said:
this is not a port for the vibrant. it is a captivate port .it have kb5 modem you just have edit the build.prop and fix the APN.other than that it is a good rom.
Click to expand...
Click to collapse
This rom: port from Captivate
About phone is T897 but this rom good on T959
Sent from my SGH using XDA App
Look for -ROM VN06a.vibrant- a few lines below the screen shots
here you go
http://www.google.com/url?sa=t&rct=...r8nhCw&usg=AFQjCNGMM-qTfMWTZsaKn-L6STv56bf_rw
Sent from my SGH using XDA App[/QUOTE]
samwest39 said:
so how do i change the modum it says .bin how do i change it. ........................................................ if you have gingerbread bootloader use the buttons combos to get into recovery and flash the modem u pick.
Click to expand...
Click to collapse
For any of you guys out there awaiting the ICS update, don't bother. Have a look for the Paranoid Android ROM thread, truly amazing and shows you what this device is really cape able of!!!
Sent from my GT-N7000 using XDA
Redundant post is redundant. Congrats on your first post/thread here...
Technically that's ICS.
Sent from my GT-N7000 using xda premium
basically that rom is from ICS base source
parisayo said:
For any of you guys out there awaiting the ICS update, don't bother. Have a look for the Paranoid Android ROM thread, truly amazing and shows you what this device is really cape able of!!!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
LOL noobs you gotta love them
overwhelmed with the hybrid ROM.
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Do a poll and kingdroid will win xD
Sent from my GT-N7000 using xda premium
Arrancamos said:
Do a poll and kingdroid will win xD
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
does the kINGdROID rom effected by brick bug?
TMT also awesome
_A.T.Omix_ said:
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Click to expand...
Click to collapse
Paranoid uses CM9 kernel, therefore it is safe.
Couldn't agree more
Couldn't agree more. Keep up the good work...
_A.T.Omix_ said:
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Click to expand...
Click to collapse
Looks like Paranoid is CM9 based so nearly no bricking risk there
Kingdriod is based on an official Kernel, so big risk of bricking .
I could be quite wrong here though.. do your own research.
senectus said:
Looks like Paranoid is CM9 based so nearly no bricking risk there
Kingdriod is based on an official Kernel, so big risk of bricking .
I could be quite wrong here though.. do your own research.
Click to expand...
Click to collapse
Paranoid is totally safe and the best thing I ever did to my Note. It is CM9 based.
Try it out, you will never go back!
Sent from my GT-N7000 using xda app-developers app
parisayo said:
Paranoid is totally safe and the best thing I ever did to my Note. It is CM9 based.
Try it out, you will never go back!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Reading the first few post in the paranoidandroid thread...
The install looks very intimidating for new flashers.
And to complicate things, there is a list of prerequisites and DONT'S. IF.......
So Im freaked out by it all, but do want to install it..
My experience so far is to.. D/L the German XXLPY and install via PC Odin.
Then root, then Speedmod Kernel..
NOW.. the PA ICS hybrid instructions warns against flashing with ICS already installed with certain kernels.....
I got lost and confused...
{Q} Can I just flash PA ICS Hybrid over what I have got already??
or {Q} do I have to go back to GB and a GB kernel first??
thanks for helping out a new flasher.
And dont forget to lecture me to read..read..read.. research....
I know that & but I will need reminders (without links as wel)l...
thanks again,,,
jimmbomb said:
Reading the first few post in the paranoidandroid thread...
The install looks very intimidating for new flashers.
And to complicate things, there is a list of prerequisites and DONT'S. IF.......
So Im freaked out by it all, but do want to install it..
My experience so far is to.. D/L the German XXLPY and install via PC Odin.
Then root, then Speedmod Kernel..
NOW.. the PA ICS hybrid instructions warns against flashing with ICS already installed with certain kernels.....
I got lost and confused...
{Q} Can I just flash PA ICS Hybrid over what I have got already??
or {Q} do I have to go back to GB and a GB kernel first??
thanks for helping out a new flasher.
And dont forget to lecture me to read..read..read.. research....
I know that & but I will need reminders (without links as wel)l...
thanks again,,,
Click to expand...
Click to collapse
My situation is exactly the same .. i want PA badly but im confused like you .. so pls guys can we flash PA rom over our stock German XXLPY with speedmod kernel ?? THANK YOU
Why do you find it difficult to return to gb? This is the most secure way
thehackersz said:
basically that rom is from ICS base source
Click to expand...
Click to collapse
Then it's never been better than my ICS he he.
It's great as far as i can see on the video. But no S-Memo for me is a big no. I know there are alternatives but I can't live without the stock S-Memo
thehackersz said:
does the kINGdROID rom effected by brick bug?
TMT also awesome
Click to expand...
Click to collapse
Kingdroid it's pretty bad, it has very very dirty stuff and useless tweaks, its buggy and drive you crazy after 1 day of use.
The idea of that rom is good but "more" not means better so that guys need to do a clean rom instead a rom full of useless crap.
gam3r20 said:
My situation is exactly the same .. i want PA badly but im confused like you .. so pls guys can we flash PA rom over our stock German XXLPY with speedmod kernel ?? THANK YOU
Click to expand...
Click to collapse
It's not confusing as long as you get the concept right. Just remember one thing.
All stock Samsung ROM are dangerous and you do not want to flash anything over them.
All AOSP ROM are safe and you can flash over them.
So what happens if you are on Samsung official like LPx, LBx, etc ? First, flash a gingerbread ROM with no wipe and then proceed with the usual flash procedure. This applies for ANY ROM that you wanted to flash not only Paranoid ROM.
Sent from my GT-N7000 using xda premium