Database Users

Sound cut off if call not picked up with call waiting

There seems to be a very annoying bug on my new XDAII that is running the 1.6O O2 ROM.
If I am on the phone and i receive a call that alerts me that there is a call is waiting, and I decline to answer it, the sound is cut off and I can't hear the caller anymore. Cancelling the current call and re-dialling is the only way of getting 'sound back'.
Furthtermore, another irritating bug is that if the phone rings and I answer after only 1-2 rings, I can't hear anything for a few seconds and have to wait those couple of seconds before i can speak to the other person. This doesn't seem to happen if the call is answered after 3-4 rings.
Any help would be appreciated.

Me too - only answer I found was to turn off call waiting.
Poor solution.

Same for me, i too had to turn off call waiting, however i found that if you are using a bluetooth headset when the second call comes in and you decline to answer it, it just transfers the current call the the phone and you can continue it there

Same problem here.
I find that if you put the call on hold and then resume - the voice will come back.
VERY irritating.

Same for me too, I have T-Mobile 1.60 and using BTHTools 1.1.0.0...
Do you use BTHTools?

yes l am using BT tools.
regards,
hasnain

I performed a hard reset...
Did NOT install BT Tools - and had the same problem.

Mine did this long before using BT tools also.

I also have the same problem....
Is it an incompatibility between the phone and Bt Tools?
Is there any solution other than turning off call waiting?

Does anyone face the 2nd problem that I mentioned:
Sometimes when I pick up the phone after it rings, it takes a couple of seconds before i can hear the caller. This happens more often when picking the phone up within 1 or 2 rings.

This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.

ketinson said:
This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.
Click to expand...
Click to collapse
i DON'T THINK THIS IS FIXED IN 1.72. i STILL HAVE THESE SAME PROBLEMS TOO, RUNNING t-MOBILE 1.72.
While running 1.60 I replaced the Radio Stack only with the O2 original release version - sorry don't remember version number - and it worked without these two very annoying bugs in the phone. i think it is a problem with the readio stack version only.
After losing the voice with an incoming call I can get the voice back without redialing by placing the call on hold and then resuming.
I have the same problems with or without bluetooth tools and with or without a BT headset.
Now, I have T-Mobile's 1.72 installed and am afraid to reload the working radio stack becasue of the "downgrade disaster" with 1.72. I am anxiously waiting for either a stable 1.72 or XDA Developers to help us out of this mess with this ****ty ROM.
This forum is fantastic. Thanks to everyone.
Steve

I had the problem in the 1.66 ROM, and no longer have it with 1.72!

I've just installed the new O2 1.72 ROM and am still having the same problem.
I am also suffering from a problem I was having on the old ROM. Many times when I receive a call and press the green answer button, it takes between 2-5 seconds for me to hear the person calling. The person calling also hears a similar period of slience before he/she can hear me.
The same thing also happens sometimes when I call out, where only once 2-3 rings into the call or if the other party has already picked up thephone can I hear or say something.
I'm not sure if caller ID or Photo ID has anything to do with it as I have around 1380 contacts on my xda.
This problem is extremely annoying and was wondering if there is anyone out there who has faced the problem and may have an answer for it.

Us too
We have two xda2 with 1.72, and same thing, there is a 5 second delay upon recieving any call, and sometimes there is a hangup duriong call waiting???

I never had that problem until I installed Bluetooth Tools...now it always happens. Though as someone's suggested, holding and resuming seems to do the trick.

HTC Touch ELF incoming call no sound

Wonder anyone got this problem, make outgoing call or incoming call, no voice from
speaker. But if I press "Speaker On" during call I can hear the party voice. Playing
music song playback sound ok, only during call conversation can't hear any sound.
Any advice? Thanks.

I've exactly the same problem, but havn't found a solution jet!
has somebody found a solution jet. it's really anoying..

gijsje89 said:
I've exactly the same problem, but havn't found a solution jet!
has somebody found a solution jet. it's really anoying..
Click to expand...
Click to collapse
How long is your HTC Touch ? Mine is one year+ and if yours also a year+ phone, then
I probably can confirm the Touch got this problem and phone do not last long.

Same thing started happening to my Rogers elfin. On incoming calls, my microphone won't work unless I'm on speaker phone. I can't even make outgoing calls anymore. I keep getting the message "Call Ended".
I've tried flashing my original backup ROM and several different ROMS all with no success.
Anybody have any idea how to fix this please?

please a solution ....same problem

Try this:
During incoming call press volume button up. This isn't a tweak, it's just the normal settings. If it doesn't work you might have a hardware issue.

[Solved] Handsfree and waiting through Loud Speaker!

Ok XDA, i have one big/huge/enormous problem,
Scenario:
Talking on the phone, using the Wired Handsfree (which came with the phone), when i get another call (call waiting) the notification of the other call is going through the loud speaker! not only that, the ongoing is immediately routed the loud speaker, anyone near me can hear the conversation clearly!!!!!!
does anyone face this?
i checked it on 2 X1s, 1 black & 1 silver and it's there.
anyway to solve this

same problem for me

I have a similar problem with a Parrok CK3100. The phone can't ever seem to decide for sure what speakers it's supposed to be using.
Sometimes I'll press the Voice Command button on the bluetooth device and the phone speaks out, sometimes the car speakers speak out.
I just don't know.
Annoying that the much, much cheaper E71-2 handles all of this with great aplomb, as did my Q9h.

any one else facing this problem people?
i started searching in order to get a clue,
the main thing i'm thinking is that it's caused the same way VOIP (including skype) used to behave using speaker phone!
what do you think?

I have the same problem with a german x1. ROM R2A.
Is there any solution for this problem
thx
walk

Fixed
Bugs Fixes (Registry):
Sound is routed to the Loud Speaker when having a phone call and get a waiting call while using Handsfree
change the key HKCU\ControlPanel\SoundCategories\Ring\Speaker to 0 (default value = 1).
added to the wiki of X1

Thanks. I've changed that setting to see if it solves my problem, too.

Voice command stopping ringtone without announcing

I'm new to the phone, had it about a week. I did a search for my issue and found a few threads, but none that were the same problem as mine. I'm new to the terminology, so maybe I was asking the wrong question. Here it goes anyways.
I have my phone Tmobile HTC HD2 (stock rom 2.13.531.1 (90963)) setup with Voice command on.
Under VC settings I have phone checked with announce incoming calls checked as well. Checked to play through phone speaker or wired headset. When I receive a call, it will "ring" with whatever ringtone i have selected for about 1 second before it stops "ringing". The call is still incoming, but no other sound is heard. As soon as I uncheck announce incoming calls, my phone "rings" normally again. I know it's bugged and doesn't work with the bluetooth currently, but I've seen posts where people say it should work for the phones speaker. Just trying to figure out what I've done wrong.
Thanks in advanced! Any help would be great.

Hrm no one ?

Caller ID voice announcement not working.

Hi.
All options to get the voice working when someone calling are enabled. I got something like that: ring then silent, ring then silent, ring, silent - no voice are heard. All voices are installed and working ok. I got stock rom G900FXXU1BOE5. I`d try other roms, also kitkat, and did full wipe -nothing has change.
There is no metter if calling person exist in my phonebook or not -no voice heard at all.
I guess, there is problem in voice settings in hidden engenering mode or something like that (i have no idea) - i never seen that options and did not touch anything. It`s like mute enabled or something.
I know that a lot of people has problem to turn off Caller ID voice announcement, i got problem to turn it on -get that works.
Any help?
Thank You!