Has anyone noticed that when they connect to a wifi network with their NS sitting on top of their laptop a unknown tag gets picked up? I have a few CR-48's and when the NS is sitting to the right of the track pad on the laptop it will pick it up. But only while connecting to a network after putting in the password. Is this normal?
Related
sorry for the newb questions but couldn't find an answer searching and figured someone who knows would be able to give an answer easily
the question is, when in the office, sitting near my laptop (dell lat 620 w wifi) I connect my phone to the wifi network 'wfield1' and the display on the laptop turns green, and the phone shows the little antenna signifying wifi connectivity. ok- now does this mean
a) that all data sent/rec'd will not appear on cingulars bill?
b) will my works firewall (vpn) infringe upon my browsing (ie if I hit a blocked site will it say blocked on my phone?)
I originally thought it would but I turned wifi on and walked away from my laptop and realized that the wifi connection stayed on throughout the building so therefore it has nothing to do with my laptops connection to our vpn server then right?
if so, c) would I be able to use the phones wifi connection and then usb tether the phone to the laptop to browse on the laptop off the firewall and off cingulars rate charges? I have unlim anyway but keeping usage down seems worth the small step it takes to tether
hopefully I am at least a little accurate in my guesses and not way off wack. if anyone could drop some knowledge on me id appreciate it
Your phone's connection to WIFI has nothing to do with your laptop. It should connect to your WIFI router in your office. Your phone should display a different symbol on the top line of the LCD, rather than your regular "antenna" symbol.
You need to check the above before you can confirm if you are actually connected to your WIFI router.
When you are on WIFI, it is subjected to the same firewall regulations as your laptop
yes it changes from the normal "phone" antenna to the wifi icon, i do know that much.
however i'm still unsure of whether or not it is using routered data vs cingular data. i think it is using the wifi data because as i said it is showing the wifi symbol and not the E or G that shows up when connected to cingulars service
and i think i mispoke, i dont actually use the wifi on the laptop to connect to the internet. i need to dial up with a verizon card, and it connects that way, and also launches a VPN which i think is what regulates the internet usage.
i am less worried about the routers firewall than i am my (proxy?) servers abilty to record sights that i visit, ie the forums/ebay. if i visit those on wifi and my server could see that (not worried about the wifi router seeing it since i am in different offices a lot), i will just stick with using GPRS/EDGE. confusing? sorry
If it was using Cingular data, you would get a message that your phone is 'Connecting to Cingular GPRS' ..in which case you would be billed, you don't get billed for using wifi because you are NOT using cingulars network to connect to the internet, you are using your own.
after checking it again, it seems that i cannot get to the iinternet with the wifi alone. i turned off the phone and had wifi enabled and could not connet to the internet.
so normally, if it wasn't a work firewalled network, wifi will let you get to the internet without being charged via cingular. got it, thanks all
hey i was going to do wifi connection to my work laptop too till i decided its pointless cause im sitting right in front of the thing and if i actually walked away from it its going to be a decent distance and the wifi wouldnt connect anyway.
besides theres not a whole lot you can do with the connection other than read a web page or browse a network folder.
Hello.
My rooted G1 with Cyanogen 4 something (the latest from 4 series) started to act weird recently. When I turn on wifi, it shows various networks in my apartment but not mine, even though I am sitting 2 meters from router and with my laptop connected to it next to me.
It says network remembered, but not in range. I tried to reboot the phone, remove the network, but phone just does not see it.
Any ideas?
Thank you.
Okay, so this might be like beating a dead horse, but yet I haven't gotten any responses for this issue. I use WiFi alot, and at work I really need it since my phone keeps switching between ATT & T-Mobile towers. Damn cell phone companies, 2011 and coverage still sucks! Anyhow I have to use WiFi alot at work and my phone keeps doing something stupid! It will connect to the wireless just fine, but keeping it connected is the issue! Stupid thing keeps dropping connection and then reconnecting. I don't know if it is because of the carrier switch or if my router is a piece of junk. My laptop seems fine on the wireless so I think that is fine. I am running [ROM][07/04/11] Virtuous Unity Sense 3.0 based on Pyramid [1.27.0] and everything seems fine on it! So maybe a setting in the phone, or I just have crap WiFi at work? I am literally sitting beside the dang router while this issue persists. I can even go into the Settings portion of the phone and watch the WiFi constantly say "Connected to NETGEAR_2" then "Scanning" then "Obtaining IP Address" over and over, WTF? Please someone, anyone, have issues with this on their MyTouch 4g before? My setup at work has two WNR2000v3 NetGear routers that are wireless bridge so the front computers can connect to the internet. I was connecting to the back router but the signal sucked so I switched and setup the front router to give me another signal. So my phone has full strenth on signal, but yet again it drops and picks up again and makes that notification sound when it does so. That sound maybe the phone roaming, I do have that feature on. But anyhow, any info would be great, just someone please give me an idea here!
Well, came to work this morning and tried to connect to the 2nd router with my laptop and lord behold, it messed up. So maybe its not my phone after all.
Ok this may be kind of a long post but I'll first address what I think is the issue.
My note 2 doesn't appear to be automatically switching to stronger available wifi signals unless I manually toggle the wifi off then back on again. It will then connect to the stronger signal.
The reason why this has become an issue is because I bought a Diamond WR300n wifi range extender. I'm using it as a reapter. I want to have better wifi signal in my garage where I spend a lot of time. My current wifi signal drops off pretty much near the garage when using my phone. My laptop still gets decent wifi reception when I'm in the garage though.
I went through the fairly basic setup for the extender and got it working. I confirmed this by plugging in the ethernet port from the extender directly to my laptop and its receiving a signal just fine, browsing the internet etc.
So i put this extender in my garage, it connected normally and I confirmed it was working using my laptop again. Everything appeared to be working fine. The extender has the same SSID as my main wireless router (uverse 78wireblahblah).
The issue is when I'm inside my house I'm connected to the main wireless router because this is obviously the strongest signal. When I walk out of my house the signal diminishes as I approach my garage. I can walk into my garage and my wifi signal is pretty much gone even though there is this repeater putting out a working wifi signal with the same SSID as my main router.
Weird right, one would think it would automatically switch and connect to the repeater in the garage, but it doesn't.
Now if I manually turn off wifi and turn it back on while in the garage, bam, very strong signal and I'm connected. There really is two issues though, 1. my note 2 is not automatically switching over to the stronger signal (both the repeater and main wireless router have the same SSID) in the garage and 2. sometimes it connects to that stronger signal in the garage from the repeater (only after i manually toggle wifi off and on) but the internet doesn't work. I'm actually connected to my network because I can access my "Yamaha receiver app" that lets me turn up volume etc on my receiver but I don't have internet access etc. This is usually the case but after awhile it just seems to start working and I have full internet access.
I know this is only semi phone related but I figured since alot of guys on here are very savvy with this tech stuff, maybe someone could help.
Again
1. why won't my note 2 automatically switch over to that stronger wifi signal which should be the same in the garage.
2. why does it sometimes only connect to the network but doesn't allow outside internet access.
Should I try the "wifi jumper" app that supposedly auto switches to best wifi signal (i thought our phones do this anyways)?
Not sure if this is the right place to post this so please move if need be =)
Thoughts?
Stay on what Samsung preset.
Basically I owned a nexus s, it does have automatically jump to higher signal router or access point in android 4.1+.
So basically the WiFi just jumping from my router to access point and from access point to router and I ended up getting no WiFi signal. I have to switch off my access point (extender) to get my WiFi working again...
And note 2 won't give me this problem.
Accidentally sent from my Samsung Galaxy Note 2
If you'd ask me, just buy wifi jumper, you won't regret it!
It works perfectly fine with my 4 routers, all with different SSID. It's nice to have the best signal available wherever you are in the house. Wifi jumper gives me the best results I have had since trying a few different apps like it. The owner just finished rewriting the code for connecting to different routers with same SSID, so it should be the perfect solution in your situation!
And no, I'm not affiliated with it in any way, just a happy user :thumbup:
Edit: oops, old thread
thegipper said:
Ok this may be kind of a long post but I'll first address what I think is the issue.
My note 2 doesn't appear to be automatically switching to stronger available wifi signals unless I manually toggle the wifi off then back on again. It will then connect to the stronger signal.
The reason why this has become an issue is because I bought a Diamond WR300n wifi range extender. I'm using it as a reapter. I want to have better wifi signal in my garage where I spend a lot of time. My current wifi signal drops off pretty much near the garage when using my phone. My laptop still gets decent wifi reception when I'm in the garage though.
I went through the fairly basic setup for the extender and got it working. I confirmed this by plugging in the ethernet port from the extender directly to my laptop and its receiving a signal just fine, browsing the internet etc.
So i put this extender in my garage, it connected normally and I confirmed it was working using my laptop again. Everything appeared to be working fine. The extender has the same SSID as my main wireless router (uverse 78wireblahblah).
The issue is when I'm inside my house I'm connected to the main wireless router because this is obviously the strongest signal. When I walk out of my house the signal diminishes as I approach my garage. I can walk into my garage and my wifi signal is pretty much gone even though there is this repeater putting out a working wifi signal with the same SSID as my main router.
Weird right, one would think it would automatically switch and connect to the repeater in the garage, but it doesn't.
Now if I manually turn off wifi and turn it back on while in the garage, bam, very strong signal and I'm connected. There really is two issues though, 1. my note 2 is not automatically switching over to the stronger signal (both the repeater and main wireless router have the same SSID) in the garage and 2. sometimes it connects to that stronger signal in the garage from the repeater (only after i manually toggle wifi off and on) but the internet doesn't work. I'm actually connected to my network because I can access my "Yamaha receiver app" that lets me turn up volume etc on my receiver but I don't have internet access etc. This is usually the case but after awhile it just seems to start working and I have full internet access.
I know this is only semi phone related but I figured since alot of guys on here are very savvy with this tech stuff, maybe someone could help.
Again
1. why won't my note 2 automatically switch over to that stronger wifi signal which should be the same in the garage.
2. why does it sometimes only connect to the network but doesn't allow outside internet access.
Should I try the "wifi jumper" app that supposedly auto switches to best wifi signal (i thought our phones do this anyways)?
Not sure if this is the right place to post this so please move if need be =)
Thoughts?
Click to expand...
Click to collapse
wifi jumper is a good idea
luega said:
wifi jumper is a good idea
Click to expand...
Click to collapse
Yeah, Wifi Jumper is probably the way to go. In an ideal world, the WiFi stack would roam properly in all cases, but sometimes you're just not quite far enough for it to roam. This is even an issue with the PC also, but most manufacturers allow you to configure the roaming behavior of the driver to your tastes (max range or max speed).
I am having problems with my Nexus 4 not automatically connecting to Wi-Fi. This is particularly annoying as I only live a few minutes from Uni so I spend the day cycling between my home network, uni network and 3G and set tasker to do things based on where I am. However, I look at my phone it tells me I have plenty of wifi signal yet it hasn't connected. This means I either have to switch the wi-fi off and on (which seems to take longer than it should to switch back on) or reboot the phone. After this it will connect fine. Is this a software issue? Or something that is just wrong with my phone?
Cheers
I too have wifi connection problems with my Nexus 4. I can get it to connect, but it won't reconnect. Not only does it not reconnect, it doesn't even detect that the network it was just configured to connect to is sitting right in front of it.
I've tried using Wifi Analyser, and it will show all the wifi signals in my area including those of my neighbours across the street, but it simply doesn't even show my wifi signal. Oddly in Settings, sometimes my wifi signal is not listed at all (reflecting Wifi Analyser's view), and sometimes it is listed but shown as 'Not in range'. It is very frustrating, and the only reason I have not yet RMA back to Google is I have a slight hope that the next update (4.2.2) will fix it.
Needless to say, I have a number of other devices at home (Lenovo and HP laptops, iOS tablets and phone, Windows RT tablet, Windows Phone, and Nexus 7) all of which connect to my home network OK. It is clearly a bug in the Nexus 4.
I had the same problem as you guys, i flashed Franco Kernal and it works a treat now.
Not forgetting the extra battery life the kernel provides.
I suggest trying it out.