Hi, not a newbie (well almost). Had my Vega a while now, upgraded to Modaco r8 as soon as I got it and its been fine. But for the last week, when web browsing, if I don't click a link or otherwise use the connection for about 3 to 5 minutes, it won't connect through and says web page not available, even though the wifi icon at the top of the screen is there and on the wifi settings page it says I am connected. If I untick the "turn on wifi" and retick it the connection re-establishes.Have searched various things but can't anybody with the same problem. Anybody any ideas or solutions.Thanks in advance.
Hi there.
R8 is based from old firmware now (v1.08 i believe), if i remember correctly a stock firmware update did improve wifi. Not saying it should not be working, just might be time to consider upgrading your firmware to a newer base. I have not used froyo for a while now. Bar a few niggles, vegacomb is best. Honeycomb is just far better for tabs.
Sorry i could not help further.
Thanks for the reply ganjaman, if I flashed the modded stock rom, could I still use r8, as it all works (except the wireless, but as I said thats a recent thing). As from what I have read there are a few bugs with vegacomb still, so would want to wait till its virtually bug free
With a little bit of research, I've found the answer, yes I can. But if anyone knows of a different solution, please feel free to chime in!
No you cant. R8 is a full rom and will replace the modded stock files. If you want to stick with froyo, either use corvus sp1 rom or stock (from the advent website) with my add-on (link in my sig)
Last time i tried my add-on with the modded stock v1 it did not work. Not tried v2 thought.
I use vegacomb on a daily basis, and its fantastic. Your choice...
Good luck.
Cheers gangaman, I'll have a further read and see what I decide
Hi all,
yes, I dont like people who join forums just to ask one question either, but I promise, as much as I am sure this question 'must' be covered somewhere, I have searched for ages on forums and youtube install videos to gain clarification.
So.. if you are feeling charitable, all I want to know is:
For a new vegacomb install on a machine ( a viewsonic 10s to be precise) with the stock rom (2.2), my understanding is that I would
1. install the modded stock rom (v2), and then (and here is where it confuses me)
2. I think install the file "VegaComb_HC3.2_Build9n.zip"
Thbis is important, as the specific confusion is regarding 'eactly' which file to use from all the available ones.
I also believe that one could use "VegaComb HC3.2 9b Installer.exe " on its own, but with no video tutorials of this and, from my reading, several people having problems, I am assuming my steps 1 and 2 listed above would be the reccomendd route.
I would re-emphasise though if I may, that I would like to be 100% sure what actual file I should be using.
Thanks all for your kindness.
PS. I also have read that not all 10s's can be updated to vegacomb, but I only read this once. Though not a core part of my question I was wondering if anyone else had this information?
CairnsFella said:
Hi all,
yes, I dont like people who join forums just to ask one question either, but I promise, as much as I am sure this question 'must' be covered somewhere, I have searched for ages on forums and youtube install videos to gain clarification.
So.. if you are feeling charitable, all I want to know is:
For a new vegacomb install on a machine ( a viewsonic 10s to be precise) with the stock rom (2.2), my understanding is that I would
1. install the modded stock rom (v2), and then (and here is where it confuses me)
2. I think install the file "VegaComb_HC3.2_Build9n.zip"
Thbis is important, as the specific confusion is regarding 'eactly' which file to use from all the available ones.
I also believe that one could use "VegaComb HC3.2 9b Installer.exe " on its own, but with no video tutorials of this and, from my reading, several people having problems, I am assuming my steps 1 and 2 listed above would be the reccomendd route.
I would re-emphasise though if I may, that I would like to be 100% sure what actual file I should be using.
Thanks all for your kindness.
PS. I also have read that not all 10s's can be updated to vegacomb, but I only read this once. Though not a core part of my question I was wondering if anyone else had this information?
Click to expand...
Click to collapse
You have it correct!! But First, BACKUP!! original rom, just in case you have issues
1. Install modded stock rom
2. Install Vegacomb HC3.2_Build9n.zip
3. Install HC3.2_Build9n Update3.zip (install immediately after installing Build9n.zip no need to reboot)
If your new to rooting, make sure you read up on wiping data and cache, making backups etc.. before trying anything.
Then your good to go!!
I say back up your original because I have a viewpad 10s, and it would not work with any of the newer roms (Vegacomb 3.2, HoneyIce etc..) because of touchscreen issues. I found Corvus5 rom is the only one that behaves with my Viewpad, and only after I ran his calibration tool in the app drawer.
Good Luck Rooting!!
CairnsFella said:
PS. I also have read that not all 10s's can be updated to vegacomb, but I only read this once. Though not a core part of my question I was wondering if anyone else had this information?
Click to expand...
Click to collapse
All ViewSonic ViewPad 10S (Tegra2 based) can be upgraded to VegaComb ROM!
But not ViewSonic ViewPad 10 (no "S" here). Because that is a completely different tablet that is based on Intel Atom and can run in dual-boot (Android+Win7).
And to understand the difference between 9n and 9b read the first post of VegaComb ROM thread again.
9n - "N" as in Normal system partition (UK/US residents, people with system corruption issues,..).
9b - "B" as in Big system partition (lots of languages, newer gapps,...).
Read it again and all will be clear.
Thank you
Appreciatte your kind responses.
Hadnt heard of the Corvus rom.. but then being new to this and not having received my 10s yet, I guess that isnt too suprising. Ill have a look at it.
Will certainly back up as suggested given the various levels of success reported (although I imagine more people comment when things dont work, than when they do).
I will reread re: 9n and 9b as I hadnt realised the difference you highlight. I hope I can work out what is most suitable for my Australian sources tablet.
Thanks again.
CairnsFella said:
Appreciatte your kind responses.
Hadnt heard of the Corvus rom.. but then being new to this and not having received my 10s yet, I guess that isnt too suprising. Ill have a look at it.
Will certainly back up as suggested given the various levels of success reported (although I imagine more people comment when things dont work, than when they do).
I will reread re: 9n and 9b as I hadnt realised the difference you highlight. I hope I can work out what is most suitable for my Australian sources tablet.
Thanks again.
Click to expand...
Click to collapse
No Problem!!
Just take your time, read the tutorials, and know you can always recover it back to stock, if things get screwed up. Probably the hardest part, is finding a male to male usb cable to plug computer to tab to get started.
And while there is not a lot of postings in the Vega forums, there are some great people, Yani2000, Vujke025, Beegee1962, and others that are very knowledgeable, and kind, answering everyone's questions, and fixing problems.
Best thing you can do is hit the "Thanks Button" next to there post if they helped you.
Now go turn your tab into the monster even your ipad friends will envy!!
I updated with the following post in AndroidTablets.net, the post ROM Viewcomb Honeycomb 3.2.
it's very very easy
Ah, cool, you're the dev that makes the Honey Ice ROM, right?
Try posting in the welcome thread and get attention of the willverduzco moderator.
Good luck!
thanxxxxxxxxxxxxxxx
Hello people,
The fisrt question:
I wanna know if there's a way to connect the A500 to the internet, using a 3G USB Modem (Custom ROM or 3G module or any other mode) and HOW to do it...
The second question:
What's the best ROM in your opnion (if it has 3G, would it be better)?
Well, That's all...
Thanks people... ^^
Up...
Not sure if this is what you want...
http://forum.xda-developers.com/showthread.php?t=1118639&highlight=3g
I don't even know if it is supported on the newer roms and bootloaders.
As far as the roms? I'd check out civato's flexreaper roms, they are awesome. He also has a guide to put on the ICS bootloaders as well.
If all else fails just keep reading and snooping around the threads, your bound to find what your looking for
Hi,
First off, apologies if this question has been asked before! I've been searching the forum/web for days trying to find a full guide to help me upgrade so that I don't brick my tablet as I'm a bit nervous about it (I've only done this once before).
Does anyone have/Can anyone point me towards a guide that will help me go from Taboonay 2.2 to Taboonay 3.2 (or to any other ICS ROM)?
I have the media (A500-b6.zip and 3G-9.img which I believe is the Kernel), but I have no idea where to start. I've seen Civs guide, but I'm not sure if that applies to me.
Also happy to take recomendations on ROMS (I've chosen Taboonay because I had 2.2 with the my last and only previous manual flash but I know Vache has now unfortunately stopped developing)
Any help is much appreciated, I really want to get a new ICS ROM on there but want to make sure I dont end up with a really expensive and shiny door stopn as a result!
Thanks in advance.
Gary
Hi all,i was a member of XDA (rejoined now + tegra owners) and MIUI forums a few years back but forgot how to do everything with android (bloody drink):silly:
Anyroad, got an old Iconia A500 (ICS 4.0.3)
I've downloaded mighty Thors : (tegra owners)
CM12.1-Tegraowners_ROM_v7t1
gapps-5.0.2_a50x_TO
update-recovery-TWRP-rev2.0-beta4
trouble is i haven't the foggiest what to do next?
I know i need to root it (how?) i think i used kingroot on my Xiaomi note 2...would this work here?
I've tried Blackthund3rs root program and it infected me with chinese malware which took nearly a day to get shot from my computer (i wasnt happy)
I've also tried the 'easy method' on here..and it came up unsuccessful
I could do with laymans terms the procedure to root and everything else..
A step by step guide would be fantastic for divvies like me :cyclops:
(from tegra owners forum)
"If you have problems, start a new thread on your own, we will help you. It would be nice if you could take notes of all the steps you did and PM me those, I would like to write a tutorial since lot of people are asking."
User avatar
mrsvt
Senior Owner
Was this done? has anybody else done a nice simple one? I've tried reading through the forum but because of the back and forth i can't make head nor tail :think:
A link to a sticky on how to do everything would be fantastic! or simply please post here...
Many thanks and i look forward to any replies...cheers
Seedaripper1973
Another A500 user
I'm another A500 user in the same spot. Wireless stopped working properly and don't have an update to fix it since they stopped supporting after 4.0.3. That's what I have on mine currently. So I'd also like to know how to root it if possible and move past these problems! I've rooted another tablet before, and I know it's a very specific process of copying files and rebooting etc. But never done it on this Acer A500 and would like to keep it. Still runs great except no internet now. Some sort of common glitch, but I can't find any patches to fix it!
seedaripper said:
Hi all,i was a member of XDA (rejoined now + tegra owners) and MIUI forums a few years back but forgot how to do everything with android (bloody drink):silly:
Anyroad, got an old Iconia A500 (ICS 4.0.3)
I've downloaded mighty Thors : (tegra owners)
CM12.1-Tegraowners_ROM_v7t1
gapps-5.0.2_a50x_TO
update-recovery-TWRP-rev2.0-beta4
trouble is i haven't the foggiest what to do next?
I know i need to root it (how?) i think i used kingroot on my Xiaomi note 2...would this work here?
I've tried Blackthund3rs root program and it infected me with chinese malware which took nearly a day to get shot from my computer (i wasnt happy)
I've also tried the 'easy method' on here..and it came up unsuccessful
I could do with laymans terms the procedure to root and everything else..
A step by step guide would be fantastic for divvies like me :cyclops:
(from tegra owners forum)
"If you have problems, start a new thread on your own, we will help you. It would be nice if you could take notes of all the steps you did and PM me those, I would like to write a tutorial since lot of people are asking."
User avatar
mrsvt
Senior Owner
Was this done? has anybody else done a nice simple one? I've tried reading through the forum but because of the back and forth i can't make head nor tail :think:
A link to a sticky on how to do everything would be fantastic! or simply please post here...
Many thanks and i look forward to any replies...cheers
Seedaripper1973
Click to expand...
Click to collapse