[Q] vegacomb upgrading sd card - Vega General

Hey,
I'm sure there is a way to do this but I'm not sure!
I have just upgraded to vegacomb and are still learning! I have the stock 4gb SD card at the moment and want to upgrade. Do I have to start from scrafch again or can I copy every thing from one to the other..... the from and all apps etc?
Thanks

First thing is to make sure you make a backup of your data in your 4GB card if it has enough space ( From the recovery bootloader ).
Then you copy all the folders on mem card into a folder on your computer. Make sure you select any hidden or file system files on the mem card and copy them too.
Depending on how you want to use your new card, you can either format it for FAT32 or mixture of fat32 and ext3 . If you are planing to move you apps to SD using link2SD, i recommend have dual format which allows copying "most" of the apps to the mem card without effecting how they work. Best way to do it is to create FAT32 first and as the first-to-read partition then create ext3. make sure both partitions are primary.
I use Easeus Partion Master ( on windows ) to format the card with dual file systems.
After you did it, you can copy back the files which you saved on your computer at first stage back to the new mem card.
Hope it helps

Hi, yeah ttah does help thank you mate. So the actual ROM (vegacomb) is stored on the tablet and not the card then... thats what I wanted to doubler check.
Thanks mate.

Related

SD Card problem?

Probably this topic should be in a different place, but In some way is connected to my BA.(Im using xplode's WM6). Ok back to problem. So I have 4gb SD card and I can only copy files on it after format. If I want to add sth on a card files became damaged.(I have only one chance to write files if i want to add sth I need to copy all files back on my pc then foramt card and then copy files back on Card). Problem is connected to my BA because when i copy files on a device and from device on my card(by resco explorer) files are ok(i dont need to format card). So where is the problem??
I wish you understand what I'm talking about
Are you sure you have 4GB SD card and not SDHC? SDHC cards are not supported on BA.
I'm sure. Its weird cause when i copy file from phone memory to storage card files are ok. But whem I'm copying directly from PC to card throug card reader(or wm5torage) files are damaged,unless I make a format but format halps only for one time.
May I know the file system of your SD card?
file system of windows NTFS. System of card FAT32
i had this prob. on my previous card its due to the file format. Beyond 2 gb fat do not works so it goes to fat32 and but these non sdhc card keeps running on fat so this happens. in ideal form the 4gb sd should be 4gb sdhc to work properly.
this causes me to switch to 2 2gb sd card instead of 1 4gb. I also advice u to take backup regularly because u never know when they stop working properly.
so if its file system problem why my 1gb card i working(fat32 as well as 4gb). That could mean that 4gb card is damaged sp why its workin after format and why I can copy from phone without mistakes? Is there any way to change file system on a card? By windows formating i can only format fat32

[Q] Backing up or Imaging SD card partitions

Has anybody succeeded in doing a backup/restore of the WP7 partition from a 2 partition (1 WP7 and 1 android) microSD card? What tools have you tried?
Would DD work? Trueimage? Ghost? Mac Disk Utility?
I want to setup my fresh WP7 partition the way I like it and then image it so I can restore to it if the current microSD starts having problems.
Greatly appreciate any help!
I did this in windows.
- Free up some space in your comp hard drive
- Go to Disk Management and shrink drive. (Free space should be equal to or greater than the SD card size)
- Install easeus partition manager
- Mount the SD card
- Right click on the partition on the SD card and choose copy.
- Choose the free space in the Comp's HDD.
- Repeat for all partitions that has to be copied.
Do the reverse when you want to copy back.
Does the reverse way also work with resizing the partition? On a larger SD card?
Thanks for the response! So the only way to copy would be to another partition? Is there a way to copy to an image file instead? And, have you successfully imaged it back onto the SD card?
I was able to successfully do this using DiskImage - a free download that I found here. I was able to save the entire SDCARD (not a single partition but the entire card) to an image file and then write to back onto another sdcard of the same size. It worked! I haven't tested this thoroughly so don't blame me if it doesn't work for you. If it does - please post here so others can benefit from your experience.
Yes its working...i have doen this 3-4 times...
I did that and i transfered my wp7 partition from a 8gb sd to another 16gb sd card...
Copy the partition to usb hd and then copy back to the new sd...
It works fine....And i have a backup of the partition in my USB sd.
My recomendation is not to mess with your computers hard drive...
Do this with an external usb hd..
Another free tool to use is the MiniTool Partition wizard from here
http://www.minitool-partitionrecovery.com/
colossus

Partioning 8gb SD card, and running GDX v010

Sorry, but another basic question which I've searched for the answer but can't find an answer that makes sense to me.
I have an x8 running on Gingerdx v010. Runs great.
I have just been given a 8gb Micro SD Card, Class 10.
What's the best way to go about swapping the stock sd card with this new one - do i just copy and paste all off the old sd card onto my desktop, and then copy all that back to the new sd card?
Or do I need to partition the card in any special way?
I'm a beginner at this, so please don't get too technical!
I'd like to put some music on the new card, and I reckon i've got a few GB of albums etc to put on it. also, will probably try to put as much as possible on it to make sure there's plenty of available RAM in the internal memory.
Thanks in anticipation of your help.
This is a really useful site - glad I found it.
Impster
bump... anyone?
Backup copy/move all the files in old sdcard to PC. Insert your new sdcard and boot, enter CWM>advanced option>partition sdcard>select 512mb>then zero swap. reboot. Then copy/move ur files to new sdcard You can also partition using windows You just need partition if you are installing many apps like me
Partitioning is not required, just copy data over from old card to new card.

[Q] Change SD Card on a NAND Android HD2

Hey guys!
I'm finally upgrading from a 1GB sd card to a 32GB
My Leo has a NAND android installed and the sd card has a A2SD partition with tons of apps and a fat partition with some stuff in it.
Is is possible to change the card and still keep it working without having to reflash the whole thing? The remaining ~31GB will be used to - if possible - expand the fat partition for music and such.
Thanks for the help!
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
fmmsf said:
Hey guys!
I'm finally upgrading from a 1GB sd card to a 32GB
My Leo has a NAND android installed and the sd card has a A2SD partition with tons of apps and a fat partition with some stuff in it.
Is is possible to change the card and still keep it working without having to reflash the whole thing? The remaining ~31GB will be used to - if possible - expand the fat partition for music and such.
Thanks for the help!
Click to expand...
Click to collapse
Im about to face same issue, and here is what i plan to do:backup all apps and their data with Mybackup app from Market, copy all files on my pc(the best would be sending all apps on phone storage and only backup data- this will wor for SURE), turn off phone, put new sd, set partitions as they were with CWM(i mean same ext size) and copy all files on just created partition. I hope this will work, i'll have chance to check by myself in a few weeks.
EDIT: Seems like solution was posted while i was writing, but that assured me that i my idea was good
Cheers
Sent from my HTC HD 2 using XDA
samsamuels suggestion seems the best way to go as long as your ext partition is mounted as(/at) "/sd-ext" there are other places where the ext can be mounted; link2sd for example mounts at /data/sd-ext2. But you'll know when you backup in CWM. A full backup will find the ext if its at /sd-ext and will back it up and you'll see it doing so.
Another option would be to backup the full card; FAT and ext partitions, either within a linux distribution; Ubuntu for example where ext partition is read as normal, or using an application within windows to read it link Linux Reader or Ext2explore, although I don't recall it being too easy to write back to ext while in windows.
Third option being to use something like Partition wizard which should allow you to simply copy the ext partition from one sdcard to the other. Haven't done this myself (yet) and not sure how the HD2 handles partitions that are not made by CWM but you should be able to wipe the new sdcard to unallocated memory then copy the ext and FAT partitions across then resize the FAT to the rest of the sdcard.
samsamuel said:
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
Click to expand...
Click to collapse
Doesn't creating an EXT partition in CWM format the card? So won't the copying of the FAT32 files have to be done afterwards?
yea, hence
step 2 - via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
and
step 6 - via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
samsamuel said:
yea, hence
step 2 - via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
and
step 6 - via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
Click to expand...
Click to collapse
Oh sorry, need to improve my reading skills
samsamuel said:
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
Click to expand...
Click to collapse
Awesome post, thanks
BTW back in cwm when I repartition the sdcard, can I change the sd-part size before restoring the sd-ext part?
yea, that shouldn't be a problem.

[Q] Running CM7 off NAND - anything to consider changing SD Card?

Hi all.
I was given an HD2 running CM7 off NAND. It has a 2gb SD card in there, with around 400mb as ext3/ext4 partition.
I want to swap the 2gb for an 8gb card. Having not installed the ROM myself (and am not too familar with the process on the HD2), I'm unsure how to proceed.
Are there any files on the SD card that are likely to be needed for booting?
Can I just stick the new card in, use recovery to partition it and then remove the card - copy the old ext3/ext4 partition data over and it'll be happy?
Do I need to use recovery, can I just a Linux box to do that instead?
mr_arc said:
Can I just stick the new card in, use recovery to partition it and then remove the card - copy the old ext3/ext4 partition data over and it'll be happy?
Do I need to use recovery, can I just a Linux box to do that instead?
Click to expand...
Click to collapse
assuming you don't have a linux pc that can read ext partitions, id do it this way..
into cwm - full backup.
2gb card into card reader (or mount usb storage in android - or 'mounts and storage - mount sd card' in cwm) - copy off your whole fat32 partition - make sure you have hidden files set to show in windows explorer.
8gb card into phone, back into cwm, create the new ext partition.
8gb card back into card reader (or mounts and storage - mount sd card in cwm) and copy the fat 32 stuff back to the card.
into cwm - restore - advanced restore - restore the sd-ext partition only.
Thanks for the reply.
I do have a Linux PC to hand, and the HD2 doesn't have CWM on it.
So in the end, I used GParted to create a partition table that looked like the existing card and then copied the contents of the old card over. Phone booted up fine

Categories

Resources