[KERNEL][28MAR]SuckerPunch-Voodoo #12[Sound v7, Lagfix, Color & Sharpness][UV Supprt]
I present to you...SuckerPunch-Voodoo...includes Voodoo Lagfix, Sound v7, Color and Sharpness along with UV support (no OC)
Voodoo lagfix converts /system, /cache, /dbdata and /data to Ext4 with optimized parameters for speed but also guaranteeing data integrity.
Also, it configures the write behavior of Linux to prevent lag from happening, plus apply some memory management providing a better balance than stock settings.
Special thanks to supercurio for all his Voodoo work..And Thanks to Xcal, DG, Hardcore and everyone else!
And a BIG thanks to all of you who have donated!!
As always, flash at your own risk, im not responsible for any damages!
Get Support at #suckerpunch
Download older versions HERE
Grab the sources HERE
--To install--
Always have a backup incase something goes wrong
Flash with CWM or Odin/Heimdall
Use THIS file to remove S_volt_scheduler from CWM
Kernel Features
Built from i9000 JPX 2.2.1 sources
Voodoo Lagfix
Voodoo Sound v7
Voodoo Color/Sharpness fix
UV Support (100,200,400,600,800,1000)
Kernel HZ=100hz
Neldars Backlight Notification
Simple IO Scheduler
340mb RAM (720p Working)
Properly working TinyRCU patch
Patched lowmemorykiller
Updated ext4 code in kernel
Replaced jhash2 with jhash3
Disabled printk and android logger
HPCall support
SuckerPunch-Voodoo #12
-update Voodoo Sound v7
SuckerPunch-Voodoo #11
-update Voodoo Sound v6
SuckerPunch-Voodoo #10
-fix volume increase bug
-new NOBLN version (BLN removed)
SuckerPunch-Voodoo #9
-update Voodoo Sound v5
SuckerPunch-Voodoo #8
-add 'Simple IO' scheduler (default)
-add 10 point multitouch support (fixes few multitouch bugs)
SuckerPunch-Voodoo #7
-now works with FuguTweaks
SuckerPunch-Voodoo #6
-optimize cache flush
-update BFQ scheduler to v2 MORE INFO
-set BLN enabled by default
SuckerPunch-Voodoo #5
-add sched_autogroup patch MORE INFO
SuckerPunch-Voodoo #4
-Captivate car/home dock support
--Audio uses dock when available (use this app)
--Call audio uses dock when available
SuckerPunch-Voodoo #3
-Fixed UV (now works)
-Added 600mhz step
-Few other random bug fixes
To disable BLN without using BLN Control app, place THIS file in /etc/init.d/
To check frequency time used, use Storm717's app HERE
NOTE Use an i9000 modem <--You been warned!
NOTE Delete previous Voltage Control settings, S_volt_scheduler in /etc/init.d/ BEFORE flashing!
NOTE
When flashing a new kernel/rom your battery indicator may be off.
This means that you can have zero battery drain or a huge battery drain at the beginning.
Let the phone go through 3-5 complete charge cycles for the battery to recalibrate itself.
Looks good, I don't OC anyways, the phone is fast enough with the lagfix alone.
No time to test it out tonight engineering test in the morning
Download is now live
Nice red logo.
Edit: Doesn't boot on Cog4+KP1 (SP #51 and Paragon are fine). Froze at bootanimation and then after retrying a few times it get into the bootanimation and then just turns off.
Flashing now!
Sending, sending, sent.
wow, exactly what i was hoping for. Thanks man
opcow said:
Nice red logo.
Edit: Doesn't boot on Cog4+KP1 (SP #51 and Paragon are fine). Froze at bootanimation and then after retrying a few times it get into the bootanimation and then just turns off.
Click to expand...
Click to collapse
Make sure you delete your s_volt_scheduler
If you are coming from an OC/UV kernel, make sure to delete your Voltage Control settings, S_volt_scheduler in /etc/init.d BEFORE flashing...it will cause problems if you don't
No 600 step, yet? Hoping to see it soon.
We'll see how this fares tomorrow.
Sending, sending, sent.
Minced said:
No 600 step, yet? Hoping to see it soon.
We'll see how this fares tomorrow.
Sending, sending, sent.
Click to expand...
Click to collapse
Not yet, that will be added in next
sixstringsg said:
Make sure you delete your s_volt_scheduler
Click to expand...
Click to collapse
Oops, sorry. I guess I should always read the OP completely on a new kernel. Trying again.
Edit: yes, that was the problem. Also, didn't expect it but just for fun I tried to make the camera freeze. 100+ mode cycles and no freeze.
Won't go past the red logo, deleted the voltage file before flashing. Pulled the battery and tried to start, still the same.
Hondo209 said:
Won't go past the red logo, deleted the voltage file before flashing. Pulled the battery and tried to start, still the same.
Click to expand...
Click to collapse
Try flashing back to your previous kernel, if you deleted VC settings from the app, check /etc/init.d manually with a file manager to see if its still there..or use adb shell (rm /etc/init.d/S_volt_scheduler)...ive had it not delete it before.. or did you delete it manually to begin with?
existz said:
Try flashing back to your previous kernel, if you deleted VC settings from the app, check /etc/init.d manually with a file manager to see if its still there..or use adb shell (rm /etc/init.d/S_volt_scheduler)...ive had it not delete it before.. or did you delete it manually to begin with?
Click to expand...
Click to collapse
I deleted manually. I couldn't get back to the "desktop" or recovery mode, reflashing right now.
what kind of battery life do we expect on this? better than SP #51 and speedmod K13C? I've been looking for a kernel that allows me at least 12hrs on moderate usage and so far the only one that has done that is speedmods k13a. All the others including previous SPs have got me around 7-8hr life with proper UVs and no OCs. I'm going to flash this now and report back to you in a couple days.
P.S. will this work on Darky's 9.3B3?
Just flashed and works flawlessly for me. Battery GPS ans camera trials tomorrow. Goodnight.
opcow said:
Nice red logo.
Edit: Doesn't boot on Cog4+KP1 (SP #51 and Paragon are fine). Froze at bootanimation and then after retrying a few times it get into the bootanimation and then just turns off.
Click to expand...
Click to collapse
It does a complete VooDoo conversion which can take A LONG time if you already have everything installed. Make sure you wait.
I would have preferred we had the option to enable VooDoo.
Do I want to keep the cfq setting or use noop?
Flashed - it went to the red boot logo, the Voodoo voice said converting, then said system data cannot be accessed. Went to the bootanimation and then just kept repeating the bootanimation for at least 10 minutes. Pulled the battery, went back into recovery and flashed my old kernel. I am assuming that since I converted system to ext4 that was where my problem was. I'll convert the system back to rfs and try again once everything boots back up to make sure my phone is usable.
Edit - looks like I'll have to flash back to stock and reinstall everything. Can't get the phone to boot past the bootanimation. No worries though, it was about time start fresh again anyway after all the kernels I have flashed over the last 2 weeks. And yes, I deleted the OC/UV settings. I've forgot to do that enough times that I don't forget anymore.
s2h2golf said:
Flashed - it went to the red boot logo, the Voodoo voice said converting, then said system data cannot be accessed. Went to the bootanimation and then just kept repeating the bootanimation for at least 10 minutes. Pulled the battery, went back into recovery and flashed my old kernel. I am assuming that since I converted system to ext4 that was where my problem was. I'll convert the system back to rfs and try again once everything boots back up to make sure my phone is usable.
Edit - looks like I'll have to flash back to stock and reinstall everything. No worries though, it was about time start fresh again anyway after all the kernels I have flashed over the last 2 weeks. And yes, I deleted the OC/UV settings. I've forgot to do that enough times that I don't forget anymore.
Click to expand...
Click to collapse
I was on ext4 and voodoo converted within minutes
A.VOID said:
I was on ext4 and voodoo converted within minutes
Click to expand...
Click to collapse
Had you converted your /system files to ext4? I had everything converted to ext4 and then manually went into to CWM and converted /system to ext4. That is the only thing I can see that went wrong, especially when Voodoo said that system was not accessible. I've flashed no less than 15 different kernels in the last month and, except when I forget to delete the OC/UV settings, I never run into problems.
Please do not reply in this thread.
Code:
[QUOTE][B][COLOR="Blue"]Changelog for 20110916 Nightly_Build_v1.0 version:[/COLOR]
1.change baseband to UK/DE 2.2.2 to solve signal problem on some areas/phones
2.tweak conservative governor for battery saving
3.add powerful milestone2toolbox from Mogu-[URL="http://forum.xda-developers.com/member.php?u=2984200"]sw_acer[/URL] !
4.turn down vibration level
5.update Gallery3D to 2.0
6.remove IMEtutorial.apk
7.update CMParts.apk and battery files to MS1-0914
8.add AZERTY and QWERTZ in /system/usr/[email protected]/. Switch to any of them by renaming if you need.
And no more...
[COLOR="Blue"]Download link[COLOR="Red"]>>>[URL="http://www.mirrorcreator.com/files/RF0TPGZC/EndlessCM7-20110916-Nightly_Build_v1.0.zip_links"][I]Click me[/I][/URL]<<<[/COLOR][/B][/COLOR]
[B][COLOR="blue"]MegaUpload>>>[URL="http://www.megaupload.com/?d=JMAD7SO9"]Click here[/URL]<<<[/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Changelog for 20110914 Nightly_Build_v1.0 version:[/COLOR]
1.minor tweaks on WIFI config
Download link:>>>[I][URL="http://www.mirrorcreator.com/files/QI5PAZXX/EndlessCM7-20110914-Nightly_Build_v1.zip_links"]Click me[/URL][/I]<<<
[MegaUpload]>>>[I][URL="http://www.megaupload.com/?d=9VMX81Y9"]Click here[/URL][/I]<<<[/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110913 Nightly_Build_v2.1 version:[/COLOR]
1.fix glowing edges breaking issue
2.fix camera crash (related to glowing edges fix)
3.fix installation script
And no more......
[COLOR="Blue"]20110913 v2.1 Download link: [COLOR="Red"]>>>[URL="http://www.mirrorcreator.com/files/AGU3IC7J/EndlessCM7-20110913-Nightly_Build_v2.1.zip_links"]Click Here[/URL]<<<[/COLOR][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110913 Nightly_Build_v1 version:[/COLOR]
1.fix long stuck on 2nd-M
2.[port from MS1][QUOTE]added options to limit max CPU frequency when screen is off and when phone is in car dock
(When the phone is in car dock it can easily overheat as there is usually: heavy navigation app running, gps in use, battery charging, 3g in use, sun shining directly at phone behind front car window. All this together can lead to battery temperature rising above 50C at which point the charging is automatically stopped to prevent battery damage and you can end up with phone battery empty after some time despite phone being connected to charger. So the CPU freq limit for car dock is there to help with this temperature issue.)[/QUOTE]
3.improve UI smoothness
4.enable WIFI tethering
5.mod/fix on optimization scripts to fit MS2 better
6.update battery files to MS1-0912
7.minor tweaks on build.prop
8.update flash player and voice360 thanks to jorgebaruchi
9.downgrade CWM to stock version due to critical BUG :(
10.change boot order.
And more secret changes......
[COLOR="Blue"]20110913 v1 Download link [COLOR="Red"]>>>[/COLOR][URL="http://www.mirrorcreator.com/files/65Q1WFBY/EndlessCM7-20110913-Nightly_Build_v1.zip_links"]Click me[/URL][COLOR="red"]<<<[/COLOR][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110909 v3+ version:[/COLOR]
1.increase boot speed
2.fix secure lock of go sms and some other apps
3.update clockworkmod recovery to 5.0.2.X [COLOR="Blue"](Big thanks to [URL="http://forum.xda-developers.com/member.php?u=2045006"]WeeDv2[/URL] !)[/COLOR]
4.merge and clean and mod on optimization scripts
5.some adjustment on auto brightness
6.improve 3G
7.improve battery life
8.update battery files to MS1-0910 build
9.turn down vibration level
10.Should fix system logcat
11.update google docs to 1.0.16 and new fully functional calculator from [URL="http://forum.xda-developers.com/showthread.php?t=1161110"]Wajk[/URL]
12.arrange build.prop with some tweaks
13.Should fix some random FC or freeze issue
And more Secret changes......[/B]
[COLOR="Gray"][B]20110909 v3+ Download Link: [I]Removed[/I]...[/B][/COLOR][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 110909-nightly build v2 version:[/COLOR]
1. add Swype v3.25 Global version(no stock KB,but still keep MOTO KB)
2. improve WIFI and enable 802.n support
3. improve GPS speed
4. fix low-battery warning LED
5. improve signal(3G) and Network
6. fix sensors in new 2nd-init version
7. many tweaks to build.prop and script
8. add tweaks script from icendfire
9. change voice360 to english version (thanks to jorgebaruchi !)
10.add adobe flash player v10.3 and Titanium Backup v4.2.1
11.improve scrolling smoothness
12.fix a strange incompatible with chinese characters issue in some apps(RE/voice360/...)
13.remove HWdebounce.apk ( if you need this, come [URL="http://forum.xda-developers.com/showthread.php?t=1058544"]here[/URL] )
14.add FULL Gapps again and update Google+ to 1.0.6
15.mod imoseyon script,now you are free to wipe data
16.APN is restored to CM7 stock one
17.improve UI speed
18.fix format/restore data issue in new boot version
19.disable wifi tethering, in case of bug
20.add detail info in build.prop
And more...
[COLOR="Blue"]Patch to get STOCK phone/contact/sms back: see attachment
0909 download link: [url]http://www.mirrorcreator.com/files/HYMOVJIP/EndlessCM7-110909-Nightly_Build_signed_v2.zip_links[/url][/COLOR].[/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 110906-boot_wifi_test2 version:[/COLOR]
1. A more native fix to USB connection ( moto portal&tool is available now )
2. add imoseyon tweak script
3. improve GPS(add UK/brazil/CH+HK+TW/USA services info)
4. some adjustment on auto brightness
5. fix losing (gapps) icon issue (area related issue, redirect google services in hosts)
6. enable WIFI tethering
7. try to improve battery charging(replacing charge_only_mode)
8. try to improve touch sensitivity (build.prop)
9. clean some system apps/junks ( common/necessary gapps are reserved )
10.update moto IME from GB leak
11.improve network and voice (not sure)
12.fix sensor/GPS crash in 0906 version(replace 2nd-init with RC1.5)
13.disable 720p option in camcamera,which is buggy.
And more.
[COLOR="Blue"]Download Link: [url]http://www.mirrorcreator.com/files/MBCMQZLY/EndlessCM7-2.3.5-110906-Stable.zip_links[/url][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="blue"]Change log for 0903 RC-1.5 version:[/COLOR]
1.fix Share sd card and Share data in bootmenu
2.enhance sms
3.optimize conservative
4.compromise fix to 300mhZ setting
5.fix stock recovery
6.fix 3D gallery
7.optimize battery configuration
8.tweaks on build.prop and framework-res.apk
9.fix adbd in CWM
10.remove anti-AD hosts
11.add some optimization script（steal it from Wajk...）
12.change phone fingerprint to UK 2.2.2
13.update location info for ch ( IF you are NOT in china, please disable this function)
14.add moto IME
15.try to fix battery jumping again(replace libbattd.so from MS1)
And more......[/B]
[B][COLOR="Blue"]Download:[url]http://www.mirrorcreator.com/files/VAGTDYIT/EndlessCM7-0903-ver.MIX.zip_links[/url][/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Change log for 110901 version[Uploading] :[/B][/COLOR]
[B]0.mod auto brightness level(11 levels with each 20~25 up) and turn down brightness, make it more smooth and battery saving
1.fix compass chaos problem thanks to aceoyame in RootzWiki
2.fix random SD mounting issue in CWM4.x
3.expand touch points to 6
4.remove ninetals and speed up UI, but make it optional via patch (attachment below)
5.fix CPU governor, all available governors are:
conservative[default]
smartass
interactive
powersaver
ondemand
userspace
performance
6.CPU downvolted
1000-50
800-39
600-30
300-17
6.Enhance dialer + crystal talk + location info for ch
7.Enhance bootmenu CPU tool
8.fix white USB charger light, working now
9.fix APN issue in 0901 version
10.improve GPS/WIFI
11.Should fix battery juming and improve battery charging
12.fix keyboard half size in horizontal mode
13.add Battery Calibration/MS2 baseband switcher/rootexplorer(EN)
14.remove DEFY basebandswticher/FM/IO
15.baseband changed to GB leak
16.some more tweaks in framework-res.apk and build.prop.
17.fingerprint restored to CM7 default.
18.disable camera button turning on screen[/B]
[B]For QWERTZ keyboard, see attachment.
[/B]
[B][COLOR="Blue"]Download: [URL="http://www.mirrorcreator.com/files/1V61C8YZ/EndlessCM7-110901-nightly_build.zip_links"]EndlessCM7-110901-nightly_build.zip[/URL][/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Changelog for initial release:[/B][/COLOR]
[COLOR="Red"][B][Features][/B][/COLOR]
[B]1.New cool [I]"ninetales"/"九尾"[/I] windows animation
2.Moded spareparts.apk, you can set windows animation speed by yourself
3.Dual-Way call recording with Voice 360 [/B]
[COLOR="Red"][B][Fixed][/B][/COLOR]
[B]1.Usb connection
2.formatting and restore /data via CWM
3.now overclock setting in Bootmenu works
4.fix CPU governors
5.keyboard mapping and backlight (Both QWERTY and QWERTZ)
6.gravity/light sensor
7.GSM signal
8.camera upside down
9.re-enable dual-way call recording
10.stock keyboard half size[/B]
[COLOR="red"][B][MOD][/B][/COLOR]
[B]1.Undervolt and default CPU governor set to [I]conservative[/I]
1000---49
800---39
600---30
300---17
2.Add [I]"ninetales"/"九尾"[/I] windows animation
3.update superuser and su to 3.0 beta 4
4.add full latest gapps inside
5.bootanimation changed
6.vm heap set to 48m
7.touch point set to 4
8.sd card cache set to 2048
9.wifi scan internal set to 180
10.enable hw accelerate
11.And some other tweaks in buid.prop
12.Disable LED chager light by replacing file
13.Disable camera and video recording sound. And low-battery beep
14.freeze fmradio.apk+fmradioservices.apk(no hardware support) and filemanager.apk
15.add:
debouncea.apk
rootexplorer.apk
voice360.apk
ADWlauncher.apk(latest version, the stock version is laggy)
to system/app/
16.you can use camera button to turn on screen
17.add anti-ad hosts
18.phone version change to A953[/B]
[COLOR="Blue"][B]Direct link by chibani: [URL="http://android.loicg.net/roms/CM7-0828-nightly-build-all_in_1.zip"]Download all-in-one.zip[/URL] [/B][/COLOR][/QUOTE]
Reserved......
Reserved......
Endless7 said:
Reserved......
Click to expand...
Click to collapse
hello friend I want to thank him for the first rom (use forum cyanogem 7 ice Crean theme in android development) she is wonderful but what I could tell her and that led in the device options options is not working and my battery falls a lot when I'm using network data or playing some game ... any idea about it? I apologize for my horrible english because I'm using google translator
Sent from my MotoA953 using xda premium
I think this topic is no longer needed most.
Please a moderator to review it.
Thank you.
What?? How can you say it? Endless7 created it yesterday and you say it's no more needed... What rights do you have to make that decisions? *facepalm*
Hi ,
I've just moved from cm7 to MIUI
Everything seems to be ok , apart from the fact the whole phone freezes for 2-5 seconds often. During this time the display doesn't change anything on the screen and the hardware buttons do not work.
So for example, if your moving left/right between the home screens - when the freeze happens it will show half of one home screen and half of the other.
It doesn't matter what your doing - there is no pattern to it. Its so annoying.
I've looked in the main thread for MIUI but found anything. Any ideas?
1) are you using latest build?
2) did you wipe cache AND data AND dalvik?
3) if nothing of above helps, then try to change vsel and/or default cpu clock
... I'm using MIUI for a while and I don't experience that problems
thanks for reply:
1) I think so - 1.12.16
2) Yep , wiped factory and cache x2 just to make sure.
3) this could be what Im after.
I've installed Milestone2 Toolbox and the overclock tool is showing
Clock 1 - 300 Vsel 17
Clock 2 - 600 Vsel 32
Clock 3 - 900 Vsel 44
Clock 4 - 1200 Vsel 60
I've tried flashing the Stock cpu/vsel values zip on the first page on the main thread: ( [ROM] [12/18] MIUI 1.12.16 GB 2.3.7 + ICS Multilanguage for Milestone 2!)
It seems that it hasnt worked - but I will try again.
NOTE - My MS2 has not rebooted itself like a lot of people who are having problems.
I tried again flashing the stock values zip from Clockwork - it looked like it worked.
Going into milestone2 toolbox however the values listed above are correct.
As such , I've changed the values manually using the milestone2 toolbox to endless cm7 values as specfied on page 35 of the main thread:
http://forum.xda-developers.com/showthread.php?t=1258073&page=35
After a few mins of use - it hasn't frozen yet.
Will give it a few hours and see how it behaves.
just to let you all know the changes above seemed to have worked
Here a Tweaks to FIX Slow Download on MIUI7 Rusian Build (maybe on Global Version too)
#1 Copy this path to your built.prop, located on system/built.prop
Scrolling down until see the same path at the bottom, select all same path and replace with the path below:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
Click to expand...
Click to collapse
Save, set permissions rw-r-r and reboot.. I used solid explorer btw
#2 If still didnt work. Try install Lspeed.
On LNET Optimizer, set net buffer to 'big', ril tweaks on, google dns and faster streaming on. Reboot
#3 Change the tcp algorithm in kernel auditor to LP or reno or cubic, if Hard to Change go to folder root proc/sys/net/ipv4 open 'tcp_congestion_control'. . Otherwise the westwood is the best..
Edit :
My opinion its because of the Custom Kernel that make Unstable Connection, when use StockKernel it doesnt!
This tweaks still not fixed the Unstable Internet Connection Problem on MIUI7 7.2 Gobal Version a Ported one!
Hit Thanks Button if I Help U:angel:
Reserved
nangdha said:
Here a tweaks to fix slow download on MIUI7 Global
Copy this path to your built.prop
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
Search the same path at the bottom, select all same path and replace with my path above. Save, set permissions rw-r-r and reboot.. I used solid explorer btw
Edit :
If still didnt work. Try install lspeed.
On LNET Optimizer, set net buffer to 'big', ril tweaks on, google dns and faster streaming on. Reboot
Hit thanks if i helped
Click to expand...
Click to collapse
Great :good:
GuestStar said:
Here a tweaks to fix slow download on MIUI7 Global Version 6.4.21 and Latest version
Copy this path to your built.prop, located on system/built.prop
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
Scrolling down until see the same path at the bottom, select all same path and replace with the path above. Save, set permissions rw-r-r and reboot.. I used solid explorer btw
If still didnt work. Try install Lspeed.
On LNET Optimizer, set net buffer to 'big', ril tweaks on, google dns and faster streaming on. Reboot
Reboot the phone when slow internet connection come again..
Edit :
Change the tcp algorithm in kernel auditor to LP or reno or cubic, if hard to Change go to folder root proc/sys/net/ipv4 open 'tcp_congestion_control'. . Otherwise the westwood is the best..
Hit thanks if i helped :angel:
Click to expand...
Click to collapse
try this for miui 7.2.1 global but it still slow internet connection help me please
backgamons said:
try this for miui 7.2.1 global but it still slow internet connection help me please
Click to expand...
Click to collapse
Only that i can.. If still slow.. Its maybe from the rom or from custom kernel that you flashed?
GuestStar said:
Only that i can.. If still slow.. Its maybe from the rom or from custom kernel that you flashed?
Click to expand...
Click to collapse
I use a stock kernel miui 7.2 global ?
Sent from my Lenovo A6000s using XDA-Developers mobile app
Deleted
backgamons said:
I use a stock kernel miui 7.2 global
Sent from my Lenovo A6000s using XDA-Developers mobile app
Click to expand...
Click to collapse
From where you got it? On xda or?
Why not choosen miui7 rusian build? Its stable, update weekly, stock kernel already modified (if you flash another kernel it will make unstable connection)
I get from xda miui 7.2 stabil hlobal for a6000
Sent from my Lenovo A6000s using XDA-Developers mobile app
GuestStar said:
Here a Tweaks to FIX Slow Download on MIUI7 Rusian Build (maybe on Global Version too)
#1 Copy this path to your built.prop, located on system/built.prop
Scrolling down until see the same path at the bottom, select all same path and replace with the path below:
Save, set permissions rw-r-r and reboot.. I used solid explorer btw
#2 If still didnt work. Try install Lspeed.
On LNET Optimizer, set net buffer to 'big', ril tweaks on, google dns and faster streaming on. Reboot
#3 Change the tcp algorithm in kernel auditor to LP or reno or cubic, if Hard to Change go to folder root proc/sys/net/ipv4 open 'tcp_congestion_control'. . Otherwise the westwood is the best..
Edit :
My opinion its because of the Custom Kernel that make Unstable Connection, when use StockKernel it doesnt!
This trick still not fixed the Unstable Internet Connection Problem on MIUI7 7.2 Gobal Version a Ported one!
Hit Thanks Button if I Help U:angel:
Click to expand...
Click to collapse
1) The buffer size for edge, hspa, umts were same even earlier, still I replaced the other values.
2) I've used connection stabilizer booster earlier. Worked in the beginning but after some time stopped working.
3) I don't think that the problem is with the custom kernels, because I tried stock too, but still the same. When, I first flashed MIUI there wasn't any such problem. Then, I went back to CM11 for a week and later when flashed again MIUI this problem started. And, when I first flashed Phantom Kernel, I saw a substantial change with increased speeds. But later after some time the problem arised again. In Phantom the default tcp congestion protocol was Reno. So, I tried Reno on stock MIUi and GoD's but in vain. Also, 'highspeed' tcp protocol shows good speeds in status bar, but MC4 still doesn't work
Edit: I've got noticable changes after adding those lines in the build.prop
Hope its permanent :silly: