wifi wont connect always disconnects - Galaxy S II General

right so my phone basically will not connect to my wifi at all its really frustrating me iv tryed everything iv reset the phone wiped all the data re flashed the firmware even tryed the wifi fixer and nothing it just says connecting then disconnected can some one please please help me iv had enough of this phone now

The only time that happens to me is when I enter the wrong WEP key...have you checked it at all?

omg thanks iv sorted it it turned out what it was i was pasting it from my message and because there was a lil gap it would not accept it lol thanks ne ways

Related

[Q] Suggestions needed

Ok, before I begin I'd like to thank anyone who has an idea before hand..lol..now then, on to my dilemma...So I got tired of my Tp2 after I seeing the epic. So I decided to flash an epic to boost..cause thats what my Tp2 was on. Every thing went great with the flash..I got the phone connected..had my mms working..and my wifi 3g, but I couldnt connect to the internet with tthew phone having wifi turned on....So I reflashed the phone..but changed some of my ppp config numbers.. i did back up my oringinal ppp config..now, ok on to the problem..when I wrote to the phone using QPST on the 2nd flash... it reset as normal.. when it came back on my signal bars went to a blue circle with a line through it..and i get a messege saying, "com,android phone has stopped unexpectedly. Please try again"..when i put the phone in DIAG Mode it dosent pic up the drives any more..and i do have the propers drivers installed..IO need to know if there away to get into the phone for programing with the issue i have....as I said before, any body who has an idea please suggest it..if not I have an epic for parts for sale!!
You ca always odin back. Otherwise I sometimes have to reboot after a rom flash to get I to work properly. Try http://forum.xda-developers.com/showthread.php?t=773032
Sent from my SPH-D700 using XDA App
trying it now..had some issues getting the tar.file to download...the you provided seemed to work...just gotta wait 30 mins to dwn load it.
It has worked for me a couple times now with no problem. Please hit thanks if I have helped.
Sent from my SPH-D700 using XDA App
It worked..just not for what i needed..i can hear the phone connecting to the com...but its not reading as a modem or portable device....the phone even does DIAG Mode ##8878# normally,, but when i try connecting QPSTor Cdma it says the port is busy or not working properly....also when i go to ceck the staus of the phone i still get the error" The process com.android. phone has stopped unexpectedly. Please try again."...the only things i chaned in QPST where PPP Config,Um settings:tethered nai: i made blank to match my Tp2...i need away to access DIAG mode..
Did you try the development section?...there's an entire thread talking about this.
I don't.know a whole.lot.about this issue.but would.doing a hands free activation and resetting everything help. ##3282#. Just trying to help
Sent from my Evo Killer!!!
OK when I do the ##3282# the phone ask for my MSL..so I was thinking it should be the same as mt Tp2 ...since I changed the SPC when I copied the Tp2s' info to the Epic...to make sure...I read the MSL/subsidy lock code off the Tp2 by means of QPST....When i enter it into the epic, it just sits there..then this error pops up >Modem exception occurs...The problem is minnor...but if theres noway to access DIG MODE to change things, I'm going to dismantel the phone..and I hate to do that.
@ lazy I will head over to the development section to see what I can come up with...a link to what page you are referring to specficaly would have been nice...but since my classes start at 12 today, I got time to seach...lol
I would take it in to the sprin store. If you have odined the modem pit and tar file and still isn't working.
Sent from my SPH-D700 using XDA App
I dnt think they'll be able to do anything....its in the programing programing
Every time I flash something different, I have to uninstall, reboot, then reinstall the drivers for it to pick up my phone again. Give that a try, and also try another usb port if still no go.
Did you try re-installing your drivers? What happens when you connect your phone to another port on your comp?
I would re install drivers and connect to a diff port.
Another way to get connected to cdma or qpst is... plug in phone. You'll receive the prompt with three choices: charging, mass storage, and tethered modem. Select "tethered modem" then select "3g modem". then add your port in cdma or qpst.
How do add the port with the method u mentioned? Tethered/3g...I'm trying that but my QPST doesnt pick up the port; it gives an error.the port isn working properly or may be busy(-2147467259) im running win7....i have reinstalled the drivers twice, and it hasnt sloved the problem...the tethered connection seems to only be for memory acess. USB must be the only wat to acess the phones hard drive.

[Q] How to fix Wifi "Turning on" stuck when restoring hasn't helped

Hello xda,
Just two days ago out of the blue while transitioning from home to the train with the Tegra on off (I remember turning it off during charging before I left) as I sat down on the train I found it turned on (unusual) I didn't think much of it but since then I later noticed that my Wifi was stuck on the "Turning Wifi on" message and that the app wouldnt allow me to click the cog in the top left to return to the settings page (moreover when I click the open programs buttons it just disappears..strange) the only reason my attention was brought to this was because my Bluetooth gave me an error saying it couldnt share bluetooth anymore.
At the time I thought a simple restart would fix it but nope it didn't. My tegra is rooted but I have had no problems until now!
Since then I have done
Factory data reset
Cleared memory cache
Factory restored using the advent factory 4.3 image http www adventcomputers co uk / product-download-select/296 (sorry first posts and I don't seem to be allowed to post links).
Right now I find myself stuck at the "Welcome" screen as after I select a language and press next the wifi tries to turn on and I cannot skip this.
Any suggestions on what I should/could try please? Is it a hardware problem like it happened with the Samsung Galaxy?
Thank you
Does anyone have a suggestion?
I am trying to compress the latest stock rom (Roms Stock 4.4.2 from rootjunkysdl) into a system.img in ext4 format so as to then place it in the automatic Vega-tegra recovery tool found at: www adventcomputers co uk / product-download-select/296
At the moment I am stuck at the fompressing a folder directory into an ext4 file .img format.
Anyone have any ideas?
The reason I am trying the above is because upon resetting it with the above mentioned recovery tool, the WiFi is still on "turning on" however with it resetting it to version 4.3 means I cannot find a way to bypass the welcome screens as it won't allow me past until I manage to connect it to the internet.
Please, any help at this point would be very much appreciated
Fiztban said:
Does anyone have a suggestion?
I am trying to compress the latest stock rom (Roms Stock 4.4.2 from rootjunkysdl) into a system.img in ext4 format so as to then place it in the automatic Vega-tegra recovery tool found at: www adventcomputers co uk / product-download-select/296
At the moment I am stuck at the fompressing a folder directory into an ext4 file .img format.
Anyone have any ideas?
The reason I am trying the above is because upon resetting it with the above mentioned recovery tool, the WiFi is still on "turning on" however with it resetting it to version 4.3 means I cannot find a way to bypass the welcome screens as it won't allow me past until I manage to connect it to the internet.
Please, any help at this point would be very much appreciated
Click to expand...
Click to collapse
Try some USB 3g/4g Dongle and insert it into micro USB , then you can connect to internet via 3g/4g and see if you can get past welcome screen.
...
I had similar problem "wifi just showing turning on forever" with a phone. But that had happened because I had accidently deleted the "insmod" binary from "/system/bin/" folder ( actually replaced it with the one that came with "precompiled busybox-1.21.1-armv7" from busybox.net.) So at that time my phone was not able to load the "Wifi module some .ko extension file") See if you are also having this problem.
asratxda said:
Try some USB 3g/4g Dongle and insert it into micro USB , then you can connect to internet via 3g/4g and see if you can get past welcome screen.
...
I had similar problem "wifi just showing turning on forever" with a phone. But that had happened because I had accidently deleted the "insmod" binary from "/system/bin/" folder ( actually replaced it with the one that came with "precompiled busybox-1.21.1-armv7" from busybox.net.) So at that time my phone was not able to load the "Wifi module some .ko extension file") See if you are also having this problem.
Click to expand...
Click to collapse
Thank you for your reply, my tegra is not set up for 3/4G as far as I know, wouldnt connecting a dongle require some app installation?
wifi stuck at "turning on" for months
Hi
My tablet turned off and on then would not connect to wifi it gets stuck at turning on amd i cannot press any buttons to turn it on.
I have reset. Put in airplane mode and finally factory reset so now it asks to connect at Welcome page but still shows turning on.
I have not rooted or am not technically savvy i just know the basics but i do not know what to do and cannot use my tablet at all!!
Please help!!
aimeymarie said:
Hi
My tablet turned off and on then would not connect to wifi it gets stuck at turning on amd i cannot press any buttons to turn it on.
I have reset. Put in airplane mode and finally factory reset so now it asks to connect at Welcome page but still shows turning on.
I have not rooted or am not technically savvy i just know the basics but i do not know what to do and cannot use my tablet at all!!
Please help!!
Click to expand...
Click to collapse
You are having one of the symptoms of a bad OTA update/Flash/etc.
I described my problem in detail here: http://forum.xda-developers.com/nvidia-tegra-note-7/help/help-tablet-stuck-fastboot-t2967999
Today I plan to work on it, I'll let you know if I get it going again with Wireless and what I had to do.

[Q] WIFI issues after rooting in sm-N900!

There is a strange problem now that my mobile loses wifi passwords, everytime after rebooting it asks for password also takes much time to connect, and when i tried connecting at my friends place its not detecting the wifi router its get stuck in scanning, kindly help!! I tried factory reset, flashing different csc stock rom but still problem exists, also auto network switch is not checked. Kindly help!
techcraze said:
there is a strange problem now that my mobile loses wifi passwords, everytime after rebooting it asks for password also takes much time to connect, and when i tried connecting at my friends place its not detecting the wifi router its get stuck in scanning, kindly help!! I tried factory reset, flashing different csc stock rom but still problem exists, also auto network switch is not checked. Kindly help!
Click to expand...
Click to collapse
can anyone help to fix this wifi issue!!1

Problem after wipe/factory reset..

I have a problem: I have rooted S5 Neo (didnt found s5 neo from forum) and i just wiped/factory reseted my phone and now im trying to start phone using again and it needs to check connection when starting using this phone from factory settings.. I have 4G connection (not WiFi) and before checking connection it asks ''Do you want to use Google Location Services?'' and i dont even have Google Location Services or Maps anymore because i just removed these bloatware apps.. Thats why i clicked ''dont use Googles location services'' and next step is that it is ''Checking Connection'' and this step keeps going for 12 hours and nothing happens.. Its still loading the ''Checking Connection''.. So it doesnt find my 4G connection or it tries to enable Google location services that means its no possible to go to next step.. I think that would be possible too.. But the problem is: It stuck to load ''Checking Connection''-step after wipe and starting use phone. So i cannot start to use this phone again. Please help.
:laugh:
Have u tried to connect to a wifi?
Or try to turn on airplane mode before ''Checking Connection'' step ..

Galaxy S5 Neo Unauthorised Reset

Hi I have my friends Galaxy S5 Neo and he done a factory reset and its ended up now showing Unauthorised Reset I have reflashed the latest software 6.0.1 with odin3 v3.13 with success but after this its still showing the Unauthorised Reset then I reflashed it with 5.1.1 with success and is still the same showing the Unauthorised Reset when it reboots and looks for the internet to get the gmail or Samsung info but says no internet connection, even though I have added my wireless key into the wifi network setting which showed connected
Do I need the PDA or the CSC firmware version for this phone
really grateful for any advise to get this back up and running for him
many thanks in advance
Once you flashed the firmware via odin did you go to recovery mode and perform a data wipe/factory reset?
guys , I'm at i don't know what the @%#%$ to do. I just bought this phone online and it is for locked . I am having the same issue, I factory reset and everything , but when it goes to connect to wifi or data. It never does it just keeps spinning and spinning never connects. Plz help. The old owner has given me his email and password to get past the FRP but I can not due to the fact I can't get past the connection part
I had this as well. I bought an S5 (not Neo) from eBay with that reported message (which the seller acknowledged up front)
Several fixes were available on YouTube, Google, and the rest. They all supposedly work on the principle of spoofing the phone to get past the lack of a browser, from which you can correct things.
None of those worked for me.
In the end, I had to prepare a USB stick with some recovery sofware on and boot the phone from that, which runs a custom APK to get you back to normal.
I know this is an old thread, but if you want, I'll try and find the information on the custom App on a stick.
PS. You will need a USBOTG cable, to be able to plug in the usb stick (or one with dual ports).
RMW

Categories

Resources