Database Users

Problem with AT&T and MMS

hehe so... got my happy self onto CM6 and fiddled around with some MMS threads here and there and everywhere to find out the APN settings... No dice on MMS

Then I plugged this in and it works for me
Name: wap.cingular
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
username: [email protected]
Pasword: CINGULAR1
Server: wireless.cingular.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS: Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN Type: <not set>
Then after saving it, I power cycled it and once I came back It's all good
hehe don't mean to be all repeatitive with the threads on the board kinda had to rip the settings from my t-mo wing.

Official (direct from TMOUS) MMS Settings

I flashed to the NAND rom, and of course, needed the correct APN settings. I've seen a number of requests for assistance, so here's what I got direct from the TMOUS tech support.
1. You need TWO APN's in there. One will be called T-Mobile Data and the other will be T-Mobile MMS
2. go to settings, wireless networks, Mobile networks, Access Point Names
3. click on the menu button and reset to default so that you can start from scratch.
4. once cleared, click on menu and then new APN
5. Name the new APN T-Mobile Data
6. Once created, click on it, and go into it. Fill in as follows... if it says <not set> below, this means skip it and do not touch it or change it in anyway
Name: T-Mobile Data
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: <not set>
MMS Port: <not set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <not set>
APN type: <not set>
Once done with the above, back out, and hit the menu and add a new APN. This new APN will be called T-Mobile MMS. Once created, go into as you did above, and the settings will be virtually identical with the APN type: mms See below:
Name: T-Mobile MMS
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: <not set>
MMS Port: <not set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <not set>
APN type: mms
Now back out of that, and you will see the two APNS listed. Only ONE will have the radio button available for you to select to activate. When you click the button, it will activate and light up green. When you do this, the 3G/H symbol may disappear for a second. Back out of there twice, and check to make sure that Mobile Network has a check mark next to it, and "Connected" Appears under that. If you see "connection failed" then it's a good idea to reboot your phone. Once you reboot, you can test MMS capability by simply sending yourself a picture message.
Have fun and say thanks.

Are you implying that it auto-switches between the two? If so then this is a fantastic discovery. Otherwise I truely see no real need for 2 APN's..

This actually makes sense. We were discussing mms on prepaid without data and it works, so we're pretty sure it goes through t-zones to send mms. The winmo roms probably do have code in them that automatically switches to send, not sure if android roms can figure it out, maybe the nexus one builds can.

Nothing to do with figuring anything out. Look at the last line of each settings, apn type.
The mms one should have "apn type mms ", whilst the data one ends " apn type default,supl "
So a default data type app like browser uses the default apn,mms uses the mms apn, and Supl I think is to do with quick GPS.

mms
I tried these settings..can send text..but cant send a picture.....any thoughts?

[Q] Can someone please help with gps

The problem is that my gps doesn't work, nor does my data. I'm really new at this and i was wondering if anyone knows an easy fix to the gps/data problem that I am having?
Any suggestions are welcome, but be advised that im still new to this.
Thanks in advance to any help.

Is there anyone that can help?

Oh btw I am running a dual boot of WP7 and Android. The WP7 is the first dft release and the Android is from this thread: http://forum.xda-developers.com/showthread.php?t=944288
So is anyone out there that can help me?

The question is: what have you tried?
apn settings etc etc.... more info needed

The apn settings are as follows:
Name- t-Mobile US
APN- epc.tmobile.com
Proxy- 216.1551.165.050
Port- 8080
Username- none
Password- ****
Server- Wap.voicestream.com
MMSC- http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy- 216.155.165.50
MMS port- 8080
MCC- 310
MNC- 260
Aunthentication type- not set
APN type- default,supl,mms
I really don't know what else there is to know, but these are the settings that came with the build. I haven't tinkered with them at all.

UPDATE:
I just figured out that the gps does work but the data connection will just turn off. Now i dont know what would cause all of this. If some one can shed some insight on the fix for this i would be grateful. Some one please help?

Do you have data enabled over network?
Sent from my Nexus One

Save you original APN. Try these to see which one work better for you. Good luck.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
<>MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
<PPP**>MMSC: not set
MMS Proxy: <not set>
MMS Port: <not set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Auth Type: <not set>
APN type: default,supl,mms
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username: None
Password: **** (These are just stars, you can put it in there manually)
Server: * (Same)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication type: none
APN Type: Not set

thnx ill try them now, i already tried the first one and for some reason the data just turns off on its own when using the WP7 it wouldnt. I dont know if its something with the roaming or what. But thanks for your input

Ok, from what i have been trying it seems to me like this has something to do with the rom. I have searched the thread on how to dual boot and i havent fpund this issue brought to light.
Recently i've been pretty much copying other t-mobile phones' apn settings but with no avail. So if there is anybody out there that has had the same issue or found a fix, please contact me asap. This is getting on my nerves....

Atrix AT&T APN settings [CWM]

I know I had to hunt forever to find these so I thought I would post them to make it easier for anyone flashing custom firmware. Every time I reflash or do a factory reset it deletes my APN settings and apparently AT&T's technical support doesn't know how to set them up. They actually referred me to Motorola. Anyways, here they are.
You can also use the attached zip along with APN Manager from the market. I don't recall who posted the original zip so thanks anonymous internet savior.
[EDIT: Now attached is a flashable CWM. Haven't tried it yet so I'm not responsible for anything.]
Oh and from what I understand you need all 4.
Name: AT&T US
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US Tether
APN: broadband
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: tether
Name: AT&T US MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: mms
Hope this helps.

Thanks, lost my APNs after flashing Alien #3 and this information was very useful!

thanks! I also flashed from alien #3 and it only gave me AT&T 310 410 as the APN.

Thankss youuu
THANK YOU so much for this listing! Someone sticky this if it hasn't been, APN listings FTW. Huge help.

here is a flashable cwm of the at&t apn's

No problem guys. Was hoping someone would find this useful. Just glad I could finally contribute something.
Sent from my MB860 using XDA Premium App

thanks for this very helpful

Just what I was looking for. Thanks!

I'm on 2.3.4, unlocked and rooted - but the APNs are all locked for me. How do you unlock them?

WOW
rrktt said:
thanks! I also flashed from alien #3 and it only gave me AT&T 310 410 as the APN.
Click to expand...
Click to collapse
Thanks a ton !! This saved me bigtime !! Alien V4 only gave me 1 apn (AT&T 310 410), and this restored all of the stock ones.
Only question is, should I select 'att us' or 'att us hsdpa' ?
Thanks !

I default to hsdpa, but both should work fine in theory

Tune it to the HSDPA I have seen better results with this setting but yes either one can be ok.. I just prefer knowing that I do have HSDPA so assume you have the same thing Cheers..

has anyone run speed tests to confirm better speeds? I have att and att tethering apns, does the hsdpa have better download or is it already intergrated into the one I have?

It should be the same. You can got to speedtest.net to confirm. When you enter the URL from your phone it will redirect you to the Android market. At that point you will be able to download the speedtest app. You may also be able to just search for it in the market.
Sent from my MB860 using XDA Premium App

I run the speed test on mine I was getting about 1.5mbps down and 1.0 up with wap.Cingular,and with hsdpa I got 3.2 down and up. That fairly comparable to what others are seeing? Havent tried it while connected to wifi yet...

Does this mean I will not use HSDPA when I tether?
What is the purpose of the tether APN?

reactivating data
since yesterday when i was trying to refresh my contacts, i managed to mess up my wireless data connection. i am unable to reconnect. i have reflashed and reinstalled all apns...rebooted phone etc, but cant get wireless data back. any thoughts on why?

jconfus said:
Does this mean I will not use HSDPA when I tether?
What is the purpose of the tether APN?
Click to expand...
Click to collapse
The ATT-Tether APN wil flag the traffic as requiring a tethering plan. If the phone is un-hacked this is how ATT blocks the tethering for those who have not bought it.
The key is
APN Boadband.
which can only be used if you bought the tethering plan.
While the generally available option
APN PHONE
Is what everybody can use.

exwannabe said:
The ATT-Tether APN wil flag the traffic as requiring a tethering plan. If the phone is un-hacked this is how ATT blocks the tethering for those who have not bought it.
The key is
APN Boadband.
which can only be used if you bought the tethering plan.
While the generally available option
APN PHONE
Is what everybody can use.
Click to expand...
Click to collapse
Exactly, the tether is specifically for tethering. From what I saw when I had the tethering plan was that it still had the same speed but it connects to a different system that is designed for tethering. I think the main difference is so that it doesn't route your computer to WAP sites. It uses isp.cingular instead of wap.cingular.
Sent from my MB860 using xda premium

Why aren't people just using sql editor to disable the entitlement check? I do with every rom and have never gotten any kind of letter or problem.
Sent from my MB860 using Tapatalk

[Q] Getting MMS to work with a R800a on AT&T.

I can't send or receive MMS. Usually hasn't been all that bad because most people send me dumb **** anyway, and I pretty much only send MMS if I'm requested to send a picture of something. Either way though, I spent the whole half a stack to avoid dealing with Verizon/losing a carrier that's been good to me, so I'd like to have everything working.
If it has any relevance, here's my APN settings
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR
Server: <Not Set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: <Not Set>
APN type: <Not Set>
My 3G always works flawlessly... but I feel like I've done something wrong... some tell me to set the APN type to default,supl, some say leave it blank... seems that regardless of the change it doesn't allow my MMS to work right.