Database Users

Help and advice with CID and Artemis Touch 3.01

Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,

Is it Vsita system?
Anthony2oo5 said:
Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,
Click to expand...
Click to collapse

No windows XP pro, service pack 2. With all the updates up to today and im logged in as administrator.
Sorry for not adding this and thanks for your reply.

have you deleted any sync'd devices and then plugged your phone in, then when active sync finds the device just press cancel so that it adds the device as guest. this worked for me!

No I didnt do that but I seemed to have got it to work.
I used a different machine which had just been formatted with windows XP service pack 2 and because this software is old, I downloaded activsync 4.2 onto that machine and it worked first go.
Another problem im having which is on both machines now. When I run the RUU, it gets the image version of my phone, but it says upgrade to image version 1.000000 see below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happened on version 3.0 and 3.01 from multiple download sources. If you continue it gets to 3% and stops saying file is currupt.
Any help ?
Thanks for everyone who offered help.

Put cert_SPCS and EnableRapi on storage card>zip, then install them.
Then try to flash another time.

Missing...
1. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone
2. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND
if there's a popup asking you to allow installation select YES
3. SoftReset your device

Ok finally i got it to work.
I used the other machine that managed to run the application properly. After that process had finished, i started step 2 straight away een though the screen of my phone was white. this worked with no problems. Last time I was restarting the phone to get rid of the white screen.
Never used the above method by coccobabbo, but could you explain it to me ? What are those applications ?
Will use that next time a new ROM comes out.
Thanks again everyone.

Anthony: That's basically the same as flashing USPL from the PC, but without a PC. You can also call it "Vista solution"

[HINT] Using Myriad JAVA taken from SE X2

Hello everybody,
Maybe a couple of you are like me not really satisfied with the integrated JBlend. It doesn't create shortcuts, looks bad etc. ...
For me the Java-client of the SE Xperia X2 did solve that problem. You can load it here: *KLICK* (Post 2)
Install it and if you're not using WWE-Rom then do the following changes within the registry:
ultrashot said:
[HKEY_LOCAL_MACHINE\Software\Apps\Esmertec Java]
"ProgramsGamesURL"="\\Windows\\Start Menu\\Programs\\Games" ;this
"ProgramsURL"="\\Windows\\Start Menu\\Programs"
\\Start Menu\\Programs\\Games is a language-dependent part
Click to expand...
Click to collapse
Do a softreset and install any midlets you want. Shortcuts will be created by default (see my screen). With this JAVA-client it is also possible to run midlets in Landscape mode (2nd screen) - added Opera Mini to rotation support with BsB-Tweak.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you want to open your midlets that are already installed on your device then go to Windows/java and simply click all the *.jar-files within that folder. They will now automatically install with the new JAVA-suite.
Maybe someone likes it as I do.
Cheers.

I downloaded the java from your link and installed it. however, I can't seem to find it in the list of programs. How do I access the new java engine? I am using WWE ROM.

As I said you have to reinstall your installed Midlets (can be found in Windows/java, *.jar-files). Then shortcuts will be created in your start menu. To see a list of all installed Midlets go to Settings (Wm6.5, not Sense), System and click on "Java".

Wonderful!
Thanks for sharing! Im using it now..
Great tip!!

Scrammy said:
Thanks for sharing! Im using it now..
Great tip!!
Click to expand...
Click to collapse
You're welcome!

hi what version opera mini did you get (link pls)
i cant get it to install . it get half way three times then fails
thx
marty

So then load it via PC. *KLICK*

ok story so far, removed myriad installed opera mini 5 beta 2 worked ok
reinstalled myriad this time to device reset then reinstalled opera , this time it worked but its working on jblend still how do i get it on myriad
also shortcut on start menu always reinstalls it
help appreciated otherwise i'll get bored and not bother lol
thx
marty

I have installed this on my Xperia X1, though when I try to run a file for Example: "Jbenchmark3D" it comes up with a message saying "could not start the JBenchmark3D application"
Any ideas what could be wrong? the icons for each app shows up in my programs list, they just done run (when I try they show the message above)
I hope someone can help..

Can it Run on Samsung i900/i908?
Hi, I installed Myriad Java on my Samsung Omnia i908, but whenever I run the Jar file, it just caused a certification problem. Can Myriad Java support Samsung i900/i908?
Thanks!

hey i tried to install myriad java on my omnia i8000 running winmo 6.1 official rom but it says "either it is not signed with a trusted certificate certificate error or one of the component cannot be found. try reinstalling." can u please upload the extracted jbed.exe in ur \windows dir please . . . . thank you.

I would like to know how can we change the fonts size in Myriad Java? In Esmertec Jbed, we could edit the fonts via registry tweaks, but I have not found similar tweak for Myriad Java. Anyone knows how?

Disable ActiveSync Autorun (cab)

Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"

so, when i need plug my cel into my pc i just need run the program and i will sync?i will dl asap xD that i was searhing for a while thanks i will reply as soon as i test xD

zxlch said:
Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"
Click to expand...
Click to collapse
From where you get that CAB or you created it?
And can you tell us what is the diference with this eLiAs_ASyncKiller.cab ? http://forum.xda-developers.com/showthread.php?t=386948
Witch one is better Now im using eLiAs_ASyncKiller and the Elias Killer is always on the processes to be able to kill the AS when is idle
WIth the Cab you provde what is the diferent, i mean what exactly the file do? Only write a reg keys or some procces are always runing to be able to kill it? just explain and we can see witch one is better.
Thanks in advance

i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks

I tried it installed and active sync didn't run but when clicked to reactivate got a message "can't mem what said as was just after you posted trying to help another user" and never got a sync till removed the program.

zen kun said:
i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks
Click to expand...
Click to collapse
True! You first need to install sdkcerts!
SDK Cert is a certificate used by the developers or programmers to sign the file/s you're using to make it/them eligible to be installed on the device. It's just like a consent from the developers for their OEM softwares to their users. To make the device accepts the file/s, the SDKCert have to be installed on the device for key matching purposes.
Hope this helps,
Senax

yea i have installed and i reinstall reset and again try install this cab no luck :S
its weird , in my Windows Emulator, works im not sure why not in my LG INCITE :S
i got wm 6.5

Guys i already told you this is the app im using http://forum.xda-developers.com/showthread.php?t=386948
Its awesome and really kill your Seync also you dont need to enable anything when you wana Sync your phone just plug the USB cable and all is done when the USB cable is unpluget the Sync is killed is simple like its must to be, also this person have alot more good litle tools for example i can recomend
ProcessKiller alias HTCDlg_killer
Im using this too on my device and all work perfect and save alot of my battery
Im using Blackstone with the ROM from my signature

i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S

Enable/disable ActiveSync alternatives
zen kun said:
i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S
Click to expand...
Click to collapse
First alternative;
ActiveSync Toggler;
http://www.pocketpcfreeware.mobi/download-activesync-toggle-v1-0-4-0.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second alternative;
Disable ActiveSync via "do nothing" ;
http://forum.xda-developers.com/showthread.php?t=646708
Maybe one of these ActiveSync workaround's will work for you,
Senax

OH THANK YOU
=)
i will try thabks a lot ;D

Try killing the activesync process before installing using task manager. its replog or something...

Harah! Another Solution to the dreaded lock of wp7!

I think I have found another solution. Follow these steps.
1) MAKE SURE YOU HAVE 100% BATTERY!!
2) Airplane mode on in wp7.
3) Make sure you have zune installed and have a msn acc signed in before doing step 4
****some people have said that you wouldn't need wp7 sdk tools installed so this is an option you can do IN my case i have the sdk tools installed
4) Disconect all connections on your computer.
***MAKE SURE PORT 443 ISNT BEING USED
*** also in my case i didnt turn off my antivirus (you can if you want to).
5) connect phone to computer and sync it.
6) make sure zune starts up and your phone is showing in zune pc application
7) make sure that your phone isnt locked or the screen isnt off
8) start chevron running with admin priv. *(doesnt have to be in root of c)(i left mine in a folder in desktop)
9) load any app of any choice from other guides
*(i recommend doing the unlock reg hack install FIRST!!! B4 DISCONECTING THE PHONE FROM THE COMPUTER[to keep the phone from relocking its self] and the hd7 reg hack install [if you want to download apps from the market].)

http://forum.xda-developers.com/showthread.php?t=913748
REG hack
AFTER THIS HACK I CAN RESTART MY PHONE AND SYNC WITH ZUNE AND IT WILL NOT RELOCK THE PHONE BEFORE I HAD TO UNLOCK AT ALMOST EVERY RESTART...
YOU CAN MOVE TO FIRST POST IF YOU LIKE
~mOe~

i have done all that.
Phone is unlocked without any problem.
But when i try to deploy a xap file with tom xap installer it says make sure you're phone is unlockend.
Usb cable is connected and zune is running.
All ready did a master reset, turning off wifi and on airplane mode.
Date and time auto is off.
Can any one help me with this?

hate to say it - dont think its as simple as a master reset - think youll need to reformat sd and reflash wp7.
if sd is buggerd, use 'panasonic sd formatter' with 'format size adjustment' on.
then i guess ud need to follow the tried n tested guides on forum to finish off the install

flashed back to 6.5, format the sd.
Then step by step by the book to 7.
Still same error, unlock without a problem but can't deploy a xap to the phone

If your phone is unlocked and you can't deploy with XAP....try Aplication Deployment from Windows Phone Developer Tools (you'll find it in start-all programs-....). XAP gives me errors so I use this tool...and it works like a charm

mccoyman said:
i have done all that.
Phone is unlocked without any problem.
But when i try to deploy a xap file with tom xap installer it says make sure you're phone is unlockend.
Usb cable is connected and zune is running.
All ready did a master reset, turning off wifi and on airplane mode.
Date and time auto is off.
Can any one help me with this?
Click to expand...
Click to collapse
oh make sure you screen isnt turned off on the actual phone... make sure its on the home screen happened to me too

when i treid this, phone was on home screen and on.
I entert the reg hack on the laptop again to be sure.
But with app deployment i get this error message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mccoyman said:
when i treid this, phone was on home screen and on.
I entert the reg hack on the laptop again to be sure.
But with app deployment i get this error message
Click to expand...
Click to collapse
I also tried that yesterday.. But i think in order for it to work you need to activate the program from Microsoft!

is there a way to work around that?
I read that more people use the MS program to sideload the apps.
Did the sign in?

arkatis said:
I also tried that yesterday.. But i think in order for it to work you need to activate the program from Microsoft!
Click to expand...
Click to collapse
mccoyman said:
is there a way to work around that?
I read that more people use the MS program to sideload the apps.
Did the sign in?
Click to expand...
Click to collapse
actually i installed the wp7 sdk from the microsoft website and didnt activate anything. For me i use the M$ program because it doesnt open with an error like the other sideloading app that i used.

Problem with 'WP7 Update Cab Sender'

Hi all,
I have a problem with updating my phone via the update cab sender.
My HD2 is on WP7 7392 now, so I need the wp7 update cab sender and the deviceprovicioning cab. Like this, right?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then if I run the update cab sender.bat as administrator, and choose 'S', I get this error:
And if I don't run it as administrator but as normal, I get this error (and the same when I drag 'deviceprovisioning.cab' in 'WP7 Update Cab Sender'.
(Sorry it's in Dutch)
It's without typing or clicking on something, just opening 'WP7 Update Cab Sender'.
I also reflashed WP7 because I thought that that may help but after reflashing and updating through zune to 7392, I still have the same problems.
So can please someone help me or give me a tip or something. I need the mango update because in the Nehterlands WP7 is only supported since mango, so I can't use the marketplace with NoDo.
Thanks in advance.

i'm also having same problem...
please some one help us to solve this problem.....
and thanks to "jellenl" for creating this thread with details.

I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.

I don't know why the folder "If needed install this tool" is there. Get rid of it.

whistler-nl said:
I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.
Click to expand...
Click to collapse
i try to do as your instruction....
and im little bit successful but than i got this error: (see the attach)
and another attach after rebooting both device PC and phone:

Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.

jellenl said:
Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.
Click to expand...
Click to collapse
@jellenl
I to am experiencing a similar problem as listed in my post [Q] Update Error C00D070A There's a communication error with your phone.
I have received the same error on two machines, both W7P SP1 (64bit&32bit), can you tell me what operating systems and their basic configurations were? I can make a third attempt if needed.
Thanks -Airstream

for sending CAB to phone you can also use this app:
http://forum.xda-developers.com/showthread.php?t=1315179

your phone should have the date and time as the computer has.and also,have you installed your x64 or x86 tool?
let us know if it helped at all.
also,screen always on,and zune not working

Thanks for the posts.
@dxdy
How would I use this utility to upload standard cabs (my phone has a standard rom and I have no interest in changing that), do I have to update the cabdata.xml file?
@florin_stann
My date and time is sync'd with the computer, x64 tool is insalled on 64bit machine, x86 tool installed on 32bit machine. Screen is set for 15 minutes and Zune process is terminated.
Thanks -Airstream

Problem Solved!
Taken from my thread at http://forum.xda-developers.com/showthread.php?p=22853654#post22853654
After manually backing up my data (there are automated tools you can use) I factory reset my phone and attempted an update to 7740 using the following tool http://forum.xda-developers.com/showthread.php?t=1315179 with a custom CabData.xml that I created for my phone (VZW Trophy). I updated my OS (7720) and Languages (English - United States (0409) and Spanish (0C0A), the two languages installed by the default) to 7740 successfully, and then updated OS and Languages to 8107 succesfully. After the update process I reseated my battery and factory reset the phone once again, and as expected the latest OS 7.10.8107.79 (8107) is still present on my phone.
It's important to note that I have a factory ROM and my phone already had it's firmware updated automatically (via Zune) to the levels noted in my original post. I believe the WP7 Update Cab Sender would have worked as well but preferred the slick interface wCabSender provided, thanks guys!
No thanks Verizon and HTC, a BIG Thanks to all at xda-developers!