HD2 update to mango 7720 has gone wrong! Please help! - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

So I have a new problem. I have updated the v1 rom to 7712. And ran the 1OEM_8X50_NK_SD_REMOVE.cab fix, but could not find the coutulla fix.
Now I cannot update to 7720 with the low space error, I cannot sync any files with zune, I cannot flash v2 with MAGLDR (give usb init error while running as admin), and I cannot even flash to stock with HardSPL.
I have also tried a hard reset several times
Is there anything I can do?

i always get usb init error when i first run rom update or MAGLDR but i close it and try again and then works,try to run it several times until it works

does't work. tried 10 times. I cannot even flash through HardSPL

Here they are. Hope this helps you.View attachment 2OEM_8x50_NK_SD_710_COTULLA_FIX.cab
View attachment 1OEM_8x50_NK_SD_REMOVE.cab

Related

error 155 during update

after reboot and sending the new rom i got this error, the device restart and the update is not applied
any hint?
error 155 during install update HTC Hero
I got the same message 155 during the ROM update for my HTC Hero. It should be a flash issue. The space for install the Image on the flage should be too low. I don't understand this, because the space on my flash (after a hard reset) is 155Mb. The downloaded file is 103Mb. Enough I think.
I have 489 MB free on the card, if a minimum space is needed htc should write it on the read me...I don't think this is the problem (but I'll try with another card tonight)
from HTC support only say to re download and reinstall, I've done this many time on my pc (XP sp3) and a couple of time at work (on Vista)
I'm happy I'm not the only one with this issue , so keep in touch!
confirmed: with empty 8GB sd card, same results
nobody else with this error?
same problem here... but this this worked for me (got it from another thread):
-------------------------------
Install HTC-sync
Connect the phone with the cable with the pc
Select on the dropdown-screen : sync --- THIS IS THE IMPORTANT STEP
Install the firmware update
---------------------------------
Also, note that I formatted the micro sd card before starting the installation.
After I got a successful installation message on the PC, my phone didn't restart. I got out the battery, reinstalled and everything is fine.... installed with the new version.
still doesn't work for me. But i also noticed i've got a problem the syncing my phone with HTC sync. I use HTC sync 2.0.4 and before i tried to update i,ve never used HTC sync before on my android
I mailed HTC and the told me the would have a look at this problem.
i've solved too, is not a problem of htc update software
the first owner of my hero negate that the phone is rooted, but i've found installed an SPL, so I think this cause the problem
i could restore the orginal one, but meantime i'm playing with the last modaco
hope can help
I know for sure my phone isn't rooted. And i have the same problem. I even called the htc helpdesk and the also could not help me. Htc offert me to colect the phone and install the update themselve
c3k said:
i've solved too, is not a problem of htc update software
the first owner of my hero negate that the phone is rooted, but i've found installed an SPL, so I think this cause the problem
i could restore the orginal one, but meantime i'm playing with the last modaco
hope can help
Click to expand...
Click to collapse
how did you restore the hero to the original one? I've been trying to do that for months and I'm getting frustated, would you please help me...
i've never did it (modaco custom rom worked fine form me), I think you can try restoring the original recovery:
download from here and put it in the tools folder of sdk
then launch:
Code:
fastboot boot cm-hero-recovery.img
hope this solve the problem, good luck
source

Suddenly experiencing the weirdest problem.

Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
I would relock and the re-unlock your hspl and see what happens. That is indeed a weird problem (that you can't send your phone in for).
Good luck
TheWizzard2203 said:
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
Click to expand...
Click to collapse
sounds like a defective phone!!!!
Yeah, that was my idea too. I tried relocking and reunlocking it with HSPL, but that doesn't matter.
But the problem is, how do I explain this to HTC if I want to send the phone to them for repair? I can't tell them that the problem only occurs when I install a custom made rom.
Pfff okay, I found the solution. It wasn't a hardwareproblem after all. I went through a terribly long trial and error procedure but finally pinned the problem down to only one cabfile, named HD2MemTweak found in the registry tips and tricks section of the general forum of the HD2.
I'd installed the lastest official 3.14 rom and installed all the cabs I was used to. But noticed, after several reinstalls, that when I installed that specific cab and rebooted the phone, everything went wrong. So I installed it without that cabfile and allw as working fine again. Then reinstalled HSPLv3 and installed the latest NRG Cookie Classic rom, which works fine again.
So that was the problem indeed. But one thing is strange of course, is that the mentioned cabfile used to work and suddenly stopped working. Could this maybe have something to do with the fact that the latest roms were build on the new 3.14 official rom? Who knows.....

[Q] help pleeease, phone app force close

I installed MCCM GB V2.0 Gingerbread HoneyComb Sense theme [kernel tytung_r5] and for the beginning everything worked fine. But after installing some apps and rebooting, the phone app gave robotic sound and asked for force closure. I tried to reinstall, reboot several times but same problem exists. I formatted sd card with SDFormatter 2.0 completely. Still prb exists. What am I doing wrong or is this a general problem everyone having? HD2 details as follows: WM 6.5 Build 1.66, Radio 2.10.8, HSPL 2.08. I would very grateful if someone could help me out with this prb.
How did u flash your ROM ?
Did u use CWM or DFT method ?
muzap2000 said:
I installed MCCM GB V2.0 Gingerbread HoneyComb Sense theme [kernel tytung_r5] and for the beginning everything worked fine. But after installing some apps and rebooting, the phone app gave robotic sound and asked for force closure. I tried to reinstall, reboot several times but same problem exists. I formatted sd card with SDFormatter 2.0 completely. Still prb exists. What am I doing wrong or is this a general problem everyone having? HD2 details as follows: WM 6.5 Build 1.66, Radio 2.10.8, HSPL 2.08. I would very grateful if someone could help me out with this prb.
Click to expand...
Click to collapse
No, I just flashed it to sd. and another problem with my phone is I cannot flash anything radio, wm custom, etc. when i start to flash anything via active sync, RUUCustom starts bootloader on the phone, shows the progress bar (bar stays at 0% always) and it stays for approx. 2-3 minutes and gives an error "connection error" and goes to recovery stage. I remeber last time I just falshed HSPL. That's it. Since that time I can't flash anything like radio, magldr etc. That's why I flashed android to sd by just copying android folder to sd and running clrcad.exe and haret.exe. I'm a novice and don't understand much. But I have general idea. If anyone can help me to sort out above problems, I would be very grateful.
Got the same problem with that build. I heard that it's caused by some sort of memory problems, Anyway I didn't found the solution.
Could be left over data from previous build, delete data of the apps that keep crashing.(Dialer, Dialer storage), reboot, try again.

blackSideSeven v2.05.7592 installing problem

Hy everyone;
Because i am not allowed to post in the development forum i had to post my problem here...
I had the "HD2O© v1.14 WP7 BUILD 7.0.7392.0 NODO" ROM and now want to flash "blackSideSeven v2.05.7592".
I execute the "Task29" Utility. And made a HardReset.
Then i installed the Mango ROM like i did it by HD2O before in the MAGLDR.
But now the problem is that only the HTC Screen appears and nothing else.
I also installed it a second time, same problem...
What can i do?
EDIT: Now i flashed HD2O again and it works perfect.
So, only blacksideseven not works...
_______________________
i know...bad english^^
I had the same problem with the latest XBmod ROM. After installation it just stops in the HTC screen.
I also didnt get help so far...
Did you try another Mango ROM?
Maybe you take out your SDCard, format it with some proper format tool to make it clean.
then you reformat the fone with task29.
then you try again.
its also 2.06 out now. try that.
I can just say for myself that I only tried the XBmod ROM. I did Task29 etc... SDFormatter... nothing!
I dont have a SD Card in my HD2
I do find it kind of odd that I'm unable to flash mango again. It all started when I decided to flash blacksideseven 2.06 rom from elfinlazz mango, which has been working. I've always been able to flash WP7 without ever having to do task29. Well, in the process of flashing blacksideseven I had a problem as it was throwing an error everytime it reached part.004. I tried it two more times with the same result. Then I moved to a different port and successful on the second attempt. It never worked as either it was caught in a boot cycle or it was just freeze at the HTC screen. I decided to do task29 and reflash magldr and the rom again but still can not get in. I tried elfinlazz rom again and then Yuki's but still no luck. Changed SD cards and nada! So as of right now I'm currently starting everything back from scratch by doing task29 and then magldr and stock 6.5 and then back to mango to see what happens.
P.S. As I'm writing 6.5 started up with no problems! Need to charge the phone because I've been at this since last night. I hate this!
Edit: It worked. But, you know what? I think I'm staying with 6.5 now. I mean WP7 was fun for me for 6 months that it was on my phone from dft original all the way up to mango beta 1. I found myself using my android side more often than WP7 every since Mango because I needed something reliable as WP7 mango had issues due to its beta stage. Not even 20 minutes passed before my WP7 got a no sim error! I thought I needed to restart it anyways and on the subsequent boot up it rebooted 5 times before it got stuck on the htc screen for 35 minutes. Another manual reboot worked but 20 minutes later it just went to no sim error again, so I decided i'm not gonna take this headache anymore! Elfinlazz rom previous was good but there were certain things I needed like data that didn't work 100% of the time. Again, it was fun. I believe I may go back some day. Hopefully somebody will work out the SD card issue because I believe this is the main problem I have with WP7. Maybe some workaround in the future. Good luck guys!
Now i have installed http://forum.xda-developers.com/showthread.php?t=1157535 and it works without problems...
Thats the ROM I had before trying to flash Blacksideseven. It was fine for a few days and then after that the data stopped working regularly. Then about a few days ago data disappeared entirely! That is what prompted me to try a different ROM. Now I'm stuck back with 6.5. Eww! Now it reminds me of how clunky this OS is. Been on it for few hours and I'm missing my WP7 already! Thank god I still have my android.

HD2 Zune update problem

Hello,
I've experienced the following problem:
I have installed WP7 from XBmod-Yuki's thread. Everything was great, until the moment in which i decided to update my system with Zune. I connected the phone and a long process begun. After the update everything seemed to be working, but when i locked the screen and waited a couple of minutes i wasn't able to unlock the screen - pressing all the hard buttons just didn't work, also the phone restarted by itself.
Can anyone tell me why, please?
dont know whats wrong but much safer is update with CAB files.. i very suspicious to MS updates.... you never know what MS pushing....
I believe there is some kind of a bug, since it did it with the downloaded rom too.
Don't panic, it's just a known bug with update of Yuki's ROM via Zune. Best solution is just to flash with the last Pdaimatejam ROM

Categories

Resources