Database Users

HTC HD2 hangs when too warm.

Hello Guys,
I'm very disappointed with my HTC HD2. It has been already 3 times for fixing various issues in the service but now another one has occured.
When is hot and I keep my device in packet or too much use downloading/uploading then it hanges but in the interesting way. Everything starts working very,very slowy and half of the touchpad screen is not responding. When I remove battery and start the phone again it still works very slowly and I cannot type even PIN becouse left side of screen is unresponsive :/ After some time 5-10minutes it starts working properly.
What I have tried is:
1) hard reset
2) different rom - I have uploaded Chucky ROM
The issues are still the same. When is too hot then the phone hanges and even removing battery does not fix it which clearly shows that it must be some hardware issue. I have read some posts on different forums and it seems that not only me having these kind of problems. Some people reported to exchange 2-3 devices to have at last some working properly one.
Do you have any clues or similar problems like me?
Thank you for all your answers.

pug124 said:
Hello Guys,
I'm very disappointed with my HTC HD2. It has been already 3 times for fixing various issues in the service but now another one has occured.
When is hot and I keep my device in packet or too much use downloading/uploading then it hanges but in the interesting way. Everything starts working very,very slowy and half of the touchpad screen is not responding. When I remove battery and start the phone again it still works very slowly and I cannot type even PIN becouse left side of screen is unresponsive :/ After some time 5-10minutes it starts working properly.
What I have tried is:
1) hard reset
2) different rom - I have uploaded Chucky ROM
The issues are still the same. When is too hot then the phone hanges and even removing battery does not fix it which clearly shows that it must be some hardware issue. I have read some posts on different forums and it seems that not only me having these kind of problems. Some people reported to exchange 2-3 devices to have at last some working properly one.
Do you have any clues or similar problems like me?
Thank you for all your answers.
Click to expand...
Click to collapse
sounds like you device may be defected, i'd take it back to where you got it from.
I mean i have had freezing issue before but its never been just due to it being warm

My touchscreen no longer works

Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?

thehelios said:
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
Click to expand...
Click to collapse
It has been a problem for me with some builds. I suggest you to make a backup with some app like Titanium Backup and reinstall Android. Try with different kernels if you still have the problem. Don't worry for the moment!

I have had this problem a few times. I still can't quite figure out exactly what makes it happen but it seems to be something to do with sleep. My solution is to restart and go into NAND then do a backup apps and then quit. something gets woken up in the screen and it starts to work again. No idea why, it just does. Good luck.

So I guess my touchscreen is just dead. I reinstalled android, reflashed my phone for the froyo rom, and I even flashed a windows rom onto my phone but nothing. I even opened my phone to see if it was connected properly to the mobo but all seems right.
On the windows rom, when it does the screen calibration, I can mash the crap out of my screen and I guess it picks up some sort of signal every now and then because the crosshair moved.
If anyone knows anything about this, please reply. I don't really want this to be the end of my vogue. It's been a good 3 years so far!

http://cgi.ebay.com/Touch-Screen-Di...749473?pt=PDA_Accessories&hash=item439b537fa1
You may just need a new Digitizer.
Can get them pretty cheap on e-bay - just have to wait since coming international mail.

I am having similar problems. Usually when the phone goes to sleep and I wake it up the touch screen is unresponsive. Only way to get touch to respond is to reboot.
I have tried it on my vogue on both the fresh froyo and experimental fat free froyo using both the 10-9 and 9-29 kernel on nand. I have also used nbh editor to change the panel types (vogue uses auto detect so I changed it to Polaris) and still the same problem. I thought perhaps there was a problem with a program but I have no programs installed right now and the problem still persists.
Does anyone have any suggestions? My phone was working fine up to a few weeks ago and I would hate to be forced to use windows again. I have reinstalled windows and it works fine there so I don't think it is hardware related. It seems something happens when it goes to sleep.

Well there might be a driver issue. Try going back to the stock rom for your device and see if the touchscreen works, if it doesn't work, then it's probably broken. Try opening the vogue and disconnecting and reconnecting and then turning your device back on and test it again. if it still doesn't work, then yea you will have to get a new digitizer.
You can also try using other releases/roms with different kernels.
good luck!! and may your vogue live on!!

Thanks, I've installed a windows rom and the touchscreen has no issue there so it leads me to believe it is not the digitizer, especially because it seems to break when it goes to sleep.
I will try even older kernels and perhaps a donut build to see if the problem still exists.

Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.

n2rjt said:
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
Click to expand...
Click to collapse
Hi! I had this problem, that was the reason why I put back WM. I experienced it using .32. I think it was from 1-Oct-2010 approximately when it started to fail.

IT'S A CONSPIRACY!!!! Last week my screen broke as well. I was running "not so super froyo" and it would work for a second then just be completely unresponsive... needless to say I now have a droid x *fap**fap*

Sprint Hero screen issues had CM6 installed

Hello all and thanks in advance for the help.
I just got a refurb Hero from Sprint a couple weeks ago. I Rooted with Z4Root and started trying out Roms. I had just went from CM 6.2 to 6.1. Had everything working fine until my screen would stop coming out of hibernate mode. I would have to reset the phone to get the screen back on. It has gradually gotten worse (over the course of one day). Now when I reset the phone I might get the screen to turn on 1 out of 40 times, but the screen is now all messed up even when it does turn on now. I cant figure anything out other than to answer a call because I know where the slider is supposed to be on the screen for answering calls, so if someone calls I cant see anything I just swipe the screen and it answers fine.
Any ideas what might be causing this issue? Would it be a harware issue?
Thanks again

Yea I would try a different download you might have gotton a bad one. Also you should try a different rom after a full wipe. If that didn't work then I would say its a hardware issue.
Something.About.Me.U.Don’t
Like.Its.Cool.I.Understand.
.AWAH.

Thanks for the reply. I did nandroid back to every previous backup I had. Now I cant get the screen to turn on at all so, Im guessing its hardware. taking it to Sprint Today, we'll see what they say.
Thanks again

Yup, They replaced the screen and I'm back in business!

Swwet, glad to hear it man now enjoy more xda
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.

I was just wondering if there was something to do with installing different roms that could have cause the screen to go out? I am thinking not, but I am new to the whole rooting and rom-ing thing. Is it possible that something I did caused the screen to go out?

Na I doubt it. Hardware usually is the manufacturers fault or user error. Unless you droped it, banged it up real bad or flashed a gsm radio your good. And a screen issue such as yours is most def not a rom issue.The rom dev's on here are solid. And XDA is a well known and respected site. If you need any help with anything just let me know.
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.

cool thanks for the response. I was just worried that maybe I messed it up somehow. Glad that was likely not the case

Weird HD2 unresponsive screen

Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?

Make sure the kernel, and Rom are up to date.

I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.

ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck

well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?

i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers

Where can i disable compatibility mode?

I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!

I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1

Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!

I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer

cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.

well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now

Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App

Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?

..

Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.

Touchscreen not working

Installed IceCreamTosti HD2 ROM 0.9 worked well for a day or two then all of a sudden my screen would stop working when it went to sleep. I researched and found that there is an undervoltage script that could be causing this problem. So i deleted the script. Then it started happening again. Task29'ed, installed HyperDroid Gingerbread Xtreme to see if that would fix my problem, nope still happening. It works when it wants but the funny thing that if I get it to work, I can use it until I have to go back to the previous screen, then I would have to hit the power button to put it to sleep, unlock it for the screen to become responsive. I know it sound like a Digitizer problem but I was wondering if anyone has any other suggestions before I buy it.
Thanks!

read here http://forum.xda-developers.com/showthread.php?t=993787

I've already read that. Thanks
Im just seeing if it could be a Kernel problem or something of that sort.

I've had this problem on one of the ROMs i used, not sure which one since i didn't stay on it for to long.
After i flashed a different ROM it fixed it. This might seem like a lot of work but why not reinstall MAGLDR,
CWM & a new ROM. Maybe try RAFDROID HD. Yes i know its a really old ROM but its a goodie and this
would be for test purposes anyway. You can always switch back.
I read the mentioned thread before too and im sure it does sound like it happens but since it happened so
soon after you installed a new ROM it makes me think its the ROM, eventhough you tried to reinstall a
different one. Maybe you can make a backup of your SD card and repartition both your phone and SD.

PC10DaTruth said:
Installed IceCreamTosti HD2 ROM 0.9 worked well for a day or two then all of a sudden my screen would stop working when it went to sleep. I researched and found that there is an undervoltage script that could be causing this problem. So i deleted the script. Then it started happening again. Task29'ed, installed HyperDroid Gingerbread Xtreme to see if that would fix my problem, nope still happening. It works when it wants but the funny thing that if I get it to work, I can use it until I have to go back to the previous screen, then I would have to hit the power button to put it to sleep, unlock it for the screen to become responsive. I know it sound like a Digitizer problem but I was wondering if anyone has any other suggestions before I buy it.
Thanks!
Click to expand...
Click to collapse
After reading the other guys thread about the end key it does seem like a bad digitizer . i read other threads explaining your exact same issue . the only way to figure out if its ROM related is to flash the stock winmo 6.5 ROM . yes , i said it , winmo but thats the last resort before deeming something hardware related . if you tried the end key option , pressing really hard on the key , then i guess i would change tto winmo and try to see if it still happens then

I do have to admit it could just be coincidence and the digitizer went up but considering this happened
only a few short days after he installed a new ROM makes me feel that there is a possibility its the ROM,
or maybe even the partition he changed (if it applies) when flashing that ROM over. I still suggest to start
over from MAGLDR on, including repartitioning your phone to the proper needs of the new ROM to see
if it helps before doing something drastic like reverting back to winmo.

Thanks for the help everyone, opened the phone up. Was hard as hell! But I cleaned the dust on the contacts under the end button, still no luck. I bought a new phone. Going to get a digitizer down the road and fix this one, If anyone want to buy it just let me know.

You will get a lot more people to see your interested in selling the phone if you post it in the xda marketplace found here.
Just open a new thread there and post how much you would want for the phone. I'm sure people would be interested
especially when you can get a new digitizer off ebay for so cheap.

change an other rom,if the problem still exist,i am sorry to tell u that u should send it to fix the touch screen..