So I am going to return my tab to staples and I need to return it to stock
What steps do I need to take to make it returnable?
Sent from my MIUI Fascinate
so i followed the instructions here http://forum.ppcgeeks.com/acer-icon...conia-tablet-restore-1-141-07-ota-update.html
and i am stuck at step 5 when i press pwr and vol rockers it boots into recovery and hangs with a android and a exclaimation mark. I have the update.zip on my external sdcard and internal storage. If i let the tab boot in the upper right corner it says "Secure Boot: image LNX checksum fail!" and will hang
Please will anybody please help? Any help will be greatly apprieciated
Related
Hello,
I have a TF300T stuck on the asus logo saying "The Device is unlocked", when I tried to boot it in recovery mode (Vol Down+Power) it say:
"Android cardhu-user bootloader (2.10 e) released by "US_epad-9.4.3.29-20120511" A03"
"Checking for android ota recovery"
"Botting recovery kernel image"
and is stuck right there, I'm not even be able to start to fastboot, also I tried to boot it up with (Vol Up+Power), Windows recognize the Tablet as APX device, but don't know what else to do
Please ANY help is appreciate.
osiris5180 said:
Hello,
I have a TF300T stuck on the asus logo saying "The Device is unlocked", when I tried to boot it in recovery mode (Vol Down+Power) it say:
"Android cardhu-user bootloader (2.10 e) released by "US_epad-9.4.3.29-20120511" A03"
"Checking for android ota recovery"
"Botting recovery kernel image"
and is stuck right there, I'm not even be able to start to fastboot, also I tried to boot it up with (Vol Up+Power), Windows recognize the Tablet as APX device, but don't know what else to do
Please ANY help is appreciate.
Click to expand...
Click to collapse
I had an issue similar to this actually. My advice probably won't be helpful as it was the weekend and I got drunk and passed out while it was stuck on booting recovery kernal image and when I came to the next morning it was in recovery...don't know what happened...maybe just wait a while?
did you do any flash procedure on it, I was trying to go back to stock rom, but i ended up not flashing the CWM recovery Image, after that I went to Fastboot, and I did a wipe data, and that was it, not even going back to the fastboot option
So after flashing the kit kat factory images from here: https://developers.google.com/android/nexus/images#occam I noticed my Nexus 4 was showing 5.67 gb free space instead of the 13+gb my 16 gb model should have. I tried following the guide mentioned here: http://forum.xda-developers.com/showthread.php?t=2033692 but failed to even reboot into stock recovery.
I tried flashing stock recovery through fastboot and it showed no errors yet when I try booting into stock recovery, a screen with the android laying down and a red exclamation mark pops up.
Tried flashing all images again and still no success into booting into stock recovery OR fixing my free space. Any ideas what I can do?
Help is appreciated!
and to clarify, I am able to flash a custom recovery and boot into it but completely unable to boot into stock recovery. Only an Android with a red exclamation mark pops up but no menu. Any ideas? :-\
Are you pressing the power button then vol+ when yoy see the dead Android?
When you see the android laying down, use the volume button to scroll and the power button to select.
Sent from my Nexus 4 using Tapatalk
I've tried a few methods of getting recovery back but so far have failed. I always end up with that droid and a red warning triangle, which if left long enough it will boot into android on its own.. Any help would be greatly appreciated.
what "few methods"?
I got it cleared up. Admins feel free to delete this thread. Thank you.
I'm actually having this issue as well, I'm curious what you did to solve it?
I flash twrp with fastboot and get the red triangle when I attempt to boot into recovery. However from fastboot if I do the boot recovery.img command, twrp will boot up and run fine, but I cannot boot back into recovery straight from the bootloader, without booting from fastboot.
When you get the Triangle press power then volume up.
Am I holding down the buttons until it reboots? Or just pressing the combo once?
I'm not sure what the true issue was in my case. I downloaded another copy of twrp, flashed it and everything worked out. Bad cable or corrupt file maybe. I'm not sure.
The issue I am having is that I wanted to set my phone back to factory, after I relocked the bootloader my phone when booting(with or without the volume keys) would shut off right after showing the ZTE boot screen. Now when I connect it, it shows up as HS-USB QDLoader 9008 (COM5)..
Ive been looking at these two forums similar to my problem:
https://forum.xda-developers.com/axon-7/help/bricked-a2017u-t3573798
https://forum.xda-developers.com/axon-7/help/a2017g-totally-bricked-t3537990
I understand I should use the axon7tool(When I try "axon7tool -r boot" i get failed to connect) , but I dont know exactly what I am doing.. I apologize for me being so dumb about this but if someone could please spell out exactly what I would have to do, to get my phone back to factory settings. Any help would be greatly appreciated.
RECAP: Bootloader locked, shows up as HS-USB QDLoader 9008 (COM5), It did have TWRP.
EDIT: When trying MiFlash, I get a ERROR_BAD_FORMAT 0
I just did the exact same thing you did and had the same issue. What worked for me was downloading the factory image from ZTE, putting it on an SD card, going into stock recovery (vol up + power) and select apply update from sd card. The file you download from ZTE is double zipped, so make sure to extract the update.zip file from the parent zip before you put it on the SD card. It will be in a folder with the same parent zip name. I no longer can boot into bootloader from stock recovery (not sure if that's normal), but at least my phone works again. Here's the link.
https://www.zteusa.com/axon-7#support
Hope this helps.
EDIT: I also had TWRP when I locked my bootloader, so I'm assuming you're able to get to stock recovery with volume up + power.
Doesnt let me boot into anything.. Not sure how I screwed it up this badly. Im trying a MiFlash method right now to see if it helps
what happens when you hold down volume up and power button at the same time? you should feel a vibrate and when you let go, you should see the stock recovery.
No, Just shuts off after the ZTE logo pops up
The phone might still be on at that point. When the ZTE logo would pop up for a split second for me, MiFlash was able to see the phone. What happens when you just hold the power button for about 10 seconds right after the screen goes off? Does it stay off?
I believe you are right, when the logo isnt up(after it disappears) that is when it connects as the COM5 otherwise when the logo pops up it disconnects the resumes the cycle.
so if I hold it, it just keeps showing the ZTE logo then shutting off
Just to clarify, holding down both the volume up and power button simultaneously at the same time for at least 3-5 seconds after the phone is off (not after the screen goes blank after the ZTE logo) still gives the same result as if you just pressed the power button?
Yes.
If MiFlash can see the phone, maybe you can unlock the bootloader again?
exact same problem as you, except MiFlash successfully flashes B19 but it still doesn't boot
What you need is FLASH stock recovery in EDL Mode.
That will fix your problem..
P.S. as soon you boot your device after Flashing stock recovery ,will perform a factory reset.
DrakenFX said:
What you need is FLASH stock recovery in EDL Mode.
That will fix your problem..
P.S. as soon you boot your device after Flashing stock recovery ,will perform a factory reset.
Click to expand...
Click to collapse
I'm on stock recovery but I still get stuck on ZTE logo
Fazedyrus said:
I'm on stock recovery but I still get stuck on ZTE logo
Click to expand...
Click to collapse
You should download YOUR variant SDCARD UPDATE zip and flash using stock recovery.
DrakenFX said:
You should download YOUR variant SDCARD UPDATE zip and flash using stock recovery.
Click to expand...
Click to collapse
"E:failed to map file, Installation Aborted"
I have not tried to flash a redownloaded version of B15 because I cannot move the file onto my sd card. I was able to flash a signed twrp on locked bootloader before to enable MTP, but whenever I flash a signed twrp now, I just get stuck on zte screen. Why is this phone so inconsistent?
Hi all, so after trying to get rid of the FRP on my Galaxy S7 with Odin, I essentially bricked my phone and now it is stuck on a boot loop at first it was with the Samsung Logo screen, but I decided to screw up even more and now it is stuck on a boot loop that only displays "RECOVERY BOOTING" unable to get into the recovery it just sits there with the blue letters popping up. The files that I ended up flashing that bricked my phone were within this following thread just for reference. I was confused on what images to flash so I ended up flashing two of them a custom BOOT image and a RECOVERY image. Unable to succeed as the phone ended up on a boot loop. Any help is welcome. Thanks.
Thread with FRP removal: https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
FreakishNoob said:
Hi all, so after trying to get rid of the FRP on my Galaxy S7 with Odin, I essentially bricked my phone and now it is stuck on a boot loop at first it was with the Samsung Logo screen, but I decided to screw up even more and now it is stuck on a boot loop that only displays "RECOVERY BOOTING" unable to get into the recovery it just sits there with the blue letters popping up. The files that I ended up flashing that bricked my phone were within this following thread just for reference. I was confused on what images to flash so I ended up flashing two of them a custom BOOT image and a RECOVERY image. Unable to succeed as the phone ended up on a boot loop. Any help is welcome. Thanks.
Thread with FRP removal: https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
Click to expand...
Click to collapse
Try to reach odin download mode
Restart your phone using power home vol down and keep holding it until you reach the bootloader.
Hit OK to reach odin and flash Twrp version 3.2.2.0 hero2lte version.
Using odin 3.13 tick the ap box and flash the twrp recovery version 3.2.2.0 by pressing start.
Reach recovery by force starting power home vol down then immediately holding power home vol up to reach twrp.
even if you can't reach twrp you should be able to flash an official stock android os using the ap box in odin.
If your having bootloops it helps to flash only 1 check box at a time.
In short flash stock firmware then enable the oem unlock in developers options to disable the frp lock.