I've tried a few methods of getting recovery back but so far have failed. I always end up with that droid and a red warning triangle, which if left long enough it will boot into android on its own.. Any help would be greatly appreciated.
what "few methods"?
I got it cleared up. Admins feel free to delete this thread. Thank you.
I'm actually having this issue as well, I'm curious what you did to solve it?
I flash twrp with fastboot and get the red triangle when I attempt to boot into recovery. However from fastboot if I do the boot recovery.img command, twrp will boot up and run fine, but I cannot boot back into recovery straight from the bootloader, without booting from fastboot.
When you get the Triangle press power then volume up.
Am I holding down the buttons until it reboots? Or just pressing the combo once?
I'm not sure what the true issue was in my case. I downloaded another copy of twrp, flashed it and everything worked out. Bad cable or corrupt file maybe. I'm not sure.
Related
Alright guys this is pretty frustrating and scaring me completely.
I unlocked the bootloader no problem. Then I wanted to flash TWRP recovery by typing in this command "fastboot flash recovery openrecovery-twrp-2.3.2.3-mako.img" so I could root.
Then when I rebooted into bootloader mode and selected recovery I got the Android laying down with the red triangle exclamation mark.
So I downloaded the Nexus 4's factory image and re-flashed the stock recovery by typing fastboot flash recovery recovery.img and the same thing happens.
I even tried booting into stock recovery by typing fastboot boot recovery recovery.img and the same thing.
Any help will be appreciated and its urgent lol.
EDIT: FIXED! Forgot to type in fastboot erase cache after flashing TWRP. Not sure if it was required but I did and all is well now.
Thanks again guys
Thanks
Edit: Another issue - I installed CWM SuperSu v0.98 via TWRP and I hit reboot. Now I see the Google logo for a while. Then the Nexus logo. It doesn't boot into the actual phone. Still stuck on the Nexus logo. Any takes folks?
The android laying down with the red triangle is the stock recovery. You usually press volume up when on that screen to get stock recovery options.
Sent from my EndeavorU using xda app-developers app
bagofcrap24 said:
The android laying down with the red triangle is the stock recovery. You usually press volume up when on that screen to get stock recovery options.
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
Ya but even before when I flashed TWRP, I couldn't even get to TWRP. I went to the bootloader mode. Pressed the vol keys till I got to Recovery.Then I pressed the power button to select it and that's when I got the red triangle with the Android laying down both on stock and TWRP recoveries even when booting into the recovery vs flashing.
evaradar said:
Ya but even before when I flashed TWRP, I couldn't even get to TWRP. I went to the bootloader mode. Pressed the vol keys till I got to Recovery.Then I pressed the power button to select it and that's when I got the red triangle with the Android laying down both on stock and TWRP recoveries even when booting into the recovery vs flashing.
Click to expand...
Click to collapse
Hmm sounds like the same boot loader problem I had with the nexus 7 and it was fixed with the 4.1.2 update
Try flashing cwm recovery I normally don't use TWRP because I never really liked it too much but see if that works.
Okay so I was able to boot temporarily into TWRP by typing fastboot boot openrecovery-twrp-2.3.2.3-mako.img. Now I'll see if I can flash it... and try booting into recovery mode.People on the Nexus 4 Dev threads and on the Paranoid Android threads recommended TWRP since it works properly with Android 4.2 vs CWM and they said TWRP is a step better.
Mods please lock thread. Thanks
evaradar said:
Alright guys this is pretty frustrating and scaring me completely.
I unlocked the bootloader no problem. Then I wanted to flash TWRP recovery by typing in this command "fastboot flash recovery openrecovery-twrp-2.3.2.3-mako.img" so I could root.
Then when I rebooted into bootloader mode and selected recovery I got the Android laying down with the red triangle exclamation mark.
So I downloaded the Nexus 4's factory image and re-flashed the stock recovery by typing fastboot flash recovery recovery.img and the same thing happens.
I even tried booting into stock recovery by typing fastboot boot recovery recovery.img and the same thing.
Any help will be appreciated and its urgent lol.
EDIT: FIXED! Forgot to type in fastboot erase cache after flashing TWRP. Not sure if it was required but I did and all is well now.
Thanks again guys
Thanks
Edit: Another issue - I installed CWM SuperSu v0.98 via TWRP and I hit reboot. Now I see the Google logo for a while. Then the Nexus logo. It doesn't boot into the actual phone. Still stuck on the Nexus logo. Any takes folks?
Click to expand...
Click to collapse
Could you please be more specific on how did you fix it?
I've got my N4 maybe a month ago, I installed the 4.2.2 OTA as soon as I got it, the I proceeded to unlock it and root it, one day someone recommended to clear the cache of the phone using the stock recovery (which I thought I had / to fix another problem that I was having) I went to fastboot and tried to access recovery, BOOM, just an android laying down with a red exclamation mark, no "no command" error at all. I downloaded CWM touch and flashed it using Nexus Root Toolkit, that worked fine, but I didn't want a custom recovery and also I needed to fix a 3G latency problem that I was having, after some reading I saw that someone recommended a full flash using the stock google image.
A couple of days I proceeded to flash the factory image, I installed it, after that I did a factory reset from android itself. After doing all that I wanted to clear the cache with the stock recovery just in case, BOOM, an an android laying down with a red exclamation mark and this time with a "no command" error. Tried the trick of holding the power and pressing the volume up, NOTHING HAPPENS!
Right now I am using CWM Touch.
Any suggestion?
Thank you.
The android with the ! Is the splash screen for stock recovery press and hold power the press volume up then release both buttons it will bring up menu
Sent from my Nexus 4
spaceman860 said:
The android with the ! Is the splash screen for stock recovery press and hold power the press volume up then release both buttons it will bring up menu
Sent from my Nexus 4
Click to expand...
Click to collapse
Already did that bro and nothing happens, options do not show up.
lsv-1 said:
Already did that bro and nothing happens, options do not show up.
Click to expand...
Click to collapse
Same thing with my phone. I flashed a custom recovery but cannot get into it. By pressing recovery mode from the bootloader, it just displays an android laying down with „!”.
petrea_86 said:
Same thing with my phone. I flashed a custom recovery but cannot get into it. By pressing recovery mode from the bootloader, it just displays an android laying down with „!”.
Click to expand...
Click to collapse
The Android laying down with the ! Is the stock recovery. You don't have a custom recovery installed
Sent from my Nexus 4
I have the same problem with the stock recovery "no command". Is there a solution to the problem ....
Hey guys and gals, I decided to take my new PH-1 and root it after getting the latest OTA (this is an unlocked Sprint variant). I flashed the twrp for my build and there was an error, tried it again and the same error so I rebooted back into fastboot and it flashed but I didn't reboot into recovery. Flashed it again and booted into recovery but it was just a black screen as if the phone wasn't turned on. The closest I've gotten to recovery was the android laying down and it said "no command" but I forced a reboot at that point (I think I could have pressed up on the volume and pressed the power button to get to it from there but I haven't been able to get back to it).
I ended up flashing a modded boot image for root with Magisk 14.3 and that worked but I can't reboot my phone, it just goes to the blank screen like it isn't on and I can start it up again by holding the power button down for 15 sec. and it seems to function fine but I can't flash the OTA file to go back to complete stock or to go to the Oreo beta.
If anyone could give me some insight into this problem or a way of fixing it I would grateful, thank you.
When I go to put the official twrp on it doesn't stick after reboot. before reboot I can't flash anything either like magisk. Nothing shows inside the folders and after I reboot and go back to twrp it shows no command
Me too. I've flashed twrp-sanders and also twrp-potter. The phone will never boot into twrp recovery on its own. Also, when I fastboot boot recovery from PC, either version of TWRP loads splash screen but is frozen and requires a hard reset.
The phone is unlocked as it indicates this on boot up.
Only once after the first attempt of flashing twrp-sanders recovery did the phone boot into twrp recovery and I flashed Magisk from there. Since then, no dice
Any ideas or direction would be greatly appreciated. Thank you
Got it to finally work. I started over by flashing "twrp-sanders-r2.img".
Make sure the first thing you do after flashing the recovery is to push volume button until you see the recovery option. Then press power button to select it. It will take several seconds before you can interact with the program.
I made sure I had the magisk.zip ready to flash first thing I did.
If you don't go to recovery immediately after flashing the twrp, you'll have to start over.
I hope this helps
Hi,
I did a TWRP wipe (everything checked) to prepare for a restore to stock, but my device is now stuck at the very first "Google" screen with the pad lock icon at the bottom. How do I get it to boot?
goister said:
Hi,
I did a TWRP wipe (everything checked) to prepare for a restore to stock, but my device is now stuck at the very first "Google" screen with the pad lock icon at the bottom. How do I get it to boot?
Click to expand...
Click to collapse
So since everything was checked, that means you wiped the system partition. The device will not boot if you do that unless you flash a factory image via fastboot or new ROM via TWRP
OK, I thought wiping /system would just bring it back to factory state. 2 questions now
1. How do I get to recovery when it's always stuck at the Google screen with no adb access? Would I have to wait for the battery to run out (hence turn off), charge it for a while, then use the buttons to boot to recovery, or is there a faster way?
2. I am actually trying to revert to stock ROM (downloaded at https://developers.google.com/android/images#angler) by following step 10 of the Heisenburg guide (https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928) which advises me to use fastboot to flash the individual images. In my case, how do I boot to fastboot?
OK, so I managed to boot to the bootloader and run the following commands as per the Heisenberg guide (using the stock MTC20L firmware)
Code:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
(above command is unnecessary on Android 7.1.2 and above)
fastboot flash cache C:\angler\images\cache.img
(above command is unnecessary on Android 7.1.2 and above)
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
Everything was successful, and I did a fastboot reboot after that.
However, my device still doesn't boot up. This time. It's boot loops for a few times before turning off.
I tried booting up to bootloader with power/vol-. Curiously, I can now only do this when cable is connected. If cable is disconnected, the orange LED just blinks once when power button is pressed, and nothing happens. Once cable is connected, then I'm able to boot up to bootloader with the button combination. I then retried the flash process again, but still no go. I noticed after fastboot reboot that the orange LED blinked a few times before rebooting and boot looping.
Kinda stuck now, any ideas?
Try booting into recovery and doing a factory reset. I've had that happen to me a few times after flashing factory images and a wipe in recovery always fixed it.
Just for future information: if at any time the device is stuck in a bootloop you can get it to robot into recovery by holding the power and volume down buttons for 10 seconds, or get it to boot into bootloader by holding power and volume up buttons for 10 seconds.
Face_Plant said:
Try booting into recovery and doing a factory reset. I've had that happen to me a few times after flashing factory images and a wipe in recovery always fixed it.
Just for future information: if at any time the device is stuck in a bootloop you can get it to robot into recovery by holding the power and volume down buttons for 10 seconds, or get it to boot into bootloader by holding power and volume up buttons for 10 seconds.
Click to expand...
Click to collapse
Thanks. Booting into stock recovery shows an exclamation sign with "no command", since I don't have TWRP anymore. Would I need to first flash TWRP before I can do a factory reset?
I just tried flashing to the same sock firmware as before the problem happened (7.1.2 N2G47W) but still same problem. I notice that after the Google logo disappears and the screen goes blank, the orange LED blinks 10 times before rebooting.
Edit: Tried factory resetting in stock recovery (by holding down power button and pressing vol+), the rebooting after factory reset. Still getting a boot loop.
OK I solved the problem. Apparently if you reboot after the flash, you need to disconnect the USB cable, else it will boot loop.
OK I solved the problem. Apparently if you reboot after the flash, you need to disconnect the USB cable, else it will boot loop.
goister said:
OK I solved the problem. Apparently if you reboot after the flash, you need to disconnect the USB cable, else it will boot loop.
Click to expand...
Click to collapse
brother help me! i am facing same issue
first little info abt my device.
my device was running on android nougat with twrp recovery installed but the device was not rooted.
so get back to stock and install oreo I followed every step given on http://www.androidexplained.com/nexus-6p-revert-stock/ but somehow my phone is stuck at bootloop with no recovery installed.
Please help me here.
As per the Heisenberg guide, if you don't install root (SuperSU or Magisk), TWRP won't stick, so you'll go back to stock recovery.
For me, simply unplugging the USB cable after rebooting after a flash solved my problem. For some reason, if the cable is connected during reboot, it would boot loop.
brother, somehow I managed to install twrp. but everytime I touch it 2-3 times the phone gets switched off.
then it keeps rebooting to 'Google' logo.
can you tell me what should I do now?
@goister Hi how you manage to get to recovery when it's always stuck at the Google screen with no adb access. Please I am stuck there
tommast said:
@goister Hi how you manage to get to recovery when it's always stuck at the Google screen with no adb access. Please I am stuck there
Click to expand...
Click to collapse
hi, did youmanage to solve this problem? I am aving the exct same problem. Disconnecting the ucb isnt working for me
OK, so I did something stupid.
I have backups for my device I made by using dd. I decided to try to flash a recovery.img I put together. After flashing it, I erased the cache partition and rebooted it. The issue is, I can't get into fastboot because of it. If I try to access either recovery (holding volume up on boot) or factory mode (holding volume down on boot) it just tries to boot into android. However, android won't boot so it's just stuck on the nook loading logo. As well as that, whenever I hold the power button for a while to power it off, it just reboots. So I need a bit of advice. What should I do from this point? Should I let it die, or should I keep trying to get it to boot into either recovery or factory mode? Maybe I'm not hitting the buttons at the right timing.
Just have to say quickly, I did figure it out. The issue was that I had at some point in that process formatted the cache partition improperly, so Android couldn't boot. The solution was to leave it until it died and plug it in until it was charged up again, and then I was able to get into recovery first try after that (dunno the reasoning behind that, maybe it was continuously trying to reboot because of the fastboot reboot command). In recovery, I tried to reformat cache (which failed) and I turned it off, and then put it back in recovery. That time cache formatted properly and android was able to boot.
Thread closed as user figured it out on their own