Related
Hey guys just got a nook color last night been doing some research but i made a card that I believe should have been able to boot from sd upon start up. I have not been able to get it to do this. I am not sure what needs to be done im running stock 1.2 and not feeling rooting yet just booting cm7 from the SD but if i need to root I can. Please advise i have looked around and searched and not found adequate information? Thanks
Sent from my SGH-T959 using XDA Premium App
If you follow the instructions in the forum you should have no problems. My suggestion is to try verygreens SD size agnostic setup. Follow the instructions exactly and you should have no problems.
Sent from my NookColor using XDA Premium App
k that's the one i followed but do i have the card in the nook when i write the image to it? because it says after writing the image to it to place it in the computer... also do i need to hit anything specific to boot up from SD when i turn the nook on? because those are the instructions that i followed and i have had no luck
edit: also if i am writing the disc onto the SDcard while in the nook how would i go about doing so?
but do i have the card in the nook when i write the image to it? because it says after writing the image to it to place it in the computer...
Click to expand...
Click to collapse
I was also confused by this...
I'm having the exact same problem, and am having no luck on here trying to read and find the answer.
I just got my Nook Saturday night from Best Buy, and updated it to stock 1.2. It's not rooted. I haven't done anything to it yet. Spent most of the day yesterday just trying to get the loader image to burn to the sd card, kept refusing to do it. I am absolutely NOT a geek, and hubby (who is) finally figured out what I did wrong when he got home last night. Apparently the program I used to unpack it, had it bloated to 4 GB, instead of about 130 mb.
Well, he tried following verygreen's instructions to put CM7 on the card (8 GB class 4) so we could use that in the Nook. Can't get the Nook to boot with the card, it just keeps booting stock. Once booted, I can see the card in it, but it is not booting from it. Also, there is no Touch the future of reading screen on this nook, there is a screen that says Read Forever, if that matters. I'd sure appreciate any insight into why it might not be recognizing that it should be booting from the card.
I was really excited to get this, it's the only decent tablet I can afford, but I'm a bit frustrated. And hubby doesn't really have the mental energy to deal with this sort of thing during the week when he comes home from work. And I really wanted to learn how to do this myself, so I can do what's needed when he isn't here...
Thanks ahead of time if you read all that and can/want to help me!!
It seems likely that the card didn't get made into a bootdisk correctly.
1) Are you using windows, mac, or linux?
2) How was the μsd card connected to your computer when making it into the boot disk?
3) When you connect the card back to the laptop in the same way, what happens? What is the card labeled?
Oh, and it says "Read Forever" in 1.2. "Touch the future of reading" is from 1.1, and also CM7.
chinly43 said:
It seems likely that the card didn't get made into a bootdisk correctly.
1) Are you using windows, mac, or linux?
2) How was the μsd card connected to your computer when making it into the boot disk?
3) When you connect the card back to the laptop in the same way, what happens? What is the card labeled?
Oh, and it says "Read Forever" in 1.2. "Touch the future of reading" is from 1.1, and also CM7.
Click to expand...
Click to collapse
Thank you for responding! I have actually fixed it finally. Seems the Microcenter card I was using must not have liked all this. So I had another card laying around, a 4 GB, no idea what brand, and tried it all again. This time it worked! So happy now, got it all going so I can play with it now!
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Jeep_Lover said:
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Click to expand...
Click to collapse
I use Lexar Bootit ....a free utility...to format and flip the bit that says its a removeable drive, then your windows pc drive management can see and format it as full capacity fat32.
Hey thanks for the tip, unfortunately it won't work. I forgot to mention that I followed this tutorial ..... and updated my driver (saved my original Windows just in case) to a hitachi driver and now I can switch my SD memory card forth "removable" to "logical" and back when needed. Once I get it as a logical drive I was EASEUS to increase the size of partition 4 (SD Card)..but again no dice!!!
Seeing that I am a noob I can't post the link to the tutorial but I'll say it worked like a charm and when I want to go back to the original I just need to "roll back" the driver.
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Taosaur said:
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Click to expand...
Click to collapse
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Taosaur...I was able to get the CM7 mod up and running in no time flat. Now the wife wants me to see if I can get bluetooth working.
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
votinh said:
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
Click to expand...
Click to collapse
Yep, I had to do the above the first time I turned on bluetooth, but haven't had any trouble toggling it on and off since then. Just open notifications (that broken-circle-and-arrow button on the status bar) and you have toggles there for Wifi, bluetooth, and a couple other things.
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Jeep_Lover said:
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Click to expand...
Click to collapse
Damn! My wife never says "nookie".
votinh said:
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Click to expand...
Click to collapse
I haven't done much but read and browse a little since I flashed it, but I haven't noticed any difference from 7.1 RC1, which wasn't really any different from Nightly 102 I had before that. I mostly just flashed this time for the integrated OC/Tweaks kernel, without the video/lag problems that were reported in 132-134.
Thanks for an update, m8
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Dr. Light said:
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Click to expand...
Click to collapse
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
I used the size agnostic install method with a 16gb PNY calss 4 SD and after all the steps were completed I was showing 13.8gb free for my SD card when I looked at in on the NC. Not believing my eyes I pulled it out and looked at it with EASUS and it showed partition 4 as 13.8gb (utilizing all the cards remaining space). I then downloaded a few things and added a few books for my wife and the space shrank to 13.4gb. As stated above your computer wont show it.
In short have you looked on the NC under "Storage" (I think that is were I found it) and verified you don't have the full capacity already?
Also there is another method I needed to use when I was messing with an earlier version (Nookie) that allowed me to see an SD card as a "Local Device" so windows would let me see all partitions on the hard drive. I can't post a link until I have more posts but email me and I can send you the link if interested.
Taosaur said:
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
Click to expand...
Click to collapse
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
The only way I got Windows to see all the partitions and do anything with them was to change my driver via the "Hitachi fix" If you google Hitachi driver SD card you will find it. I used this site and even though it is long it did exactly as advertised and now I install this driver when I need to format just the partition of an SD card and then "roll back" the driver when I'm done. It tricks windows into thinking it is a local device instead of removable. www/1src/com\forums\showthread.php?t=133718
change / to .
\ = /
I can't post a link as I'm still a noob...
Jeep_Lover said:
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
Click to expand...
Click to collapse
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
Dr. Light said:
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
Click to expand...
Click to collapse
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Taosaur said:
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Click to expand...
Click to collapse
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
again thanks for your help.
Dr. Light said:
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
Click to expand...
Click to collapse
Yep, verygreen is the author of that thread and image.
Dr. Light said:
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
Click to expand...
Click to collapse
No, in fact you might be able to write the image without messing around in EASEUS at all--I'm just not sure if WinImage (or whatever) would write to the whole card or just one partition. I know if you tried to format it, Windows would only format the boot partition.
UPDATE well it looks as though I have found a solution to my woes. I made several attempts of formatting the 2gb card in my laptop to no avail. I tried my old captivate that it originally came out of and the cappy had troubles reading it. I then stuck it in my evo and it registered instant, so I did asdcard format on my evo and then finally the tablet registers the card. In case this helps anyone else
First off someone please enlighten me on the tabs use and the way it mounts the external SD, I read somewhere that it only uses it for media files such as music books and pics. I have an 8GB that belongs in my EVO, and a 2gb that I had for my captivate I was hoping to use in my Tab for now.
Here's my story, maybe someone can shed a little light here: My tab was purchased with Stock 3.1, I was getting annoyed by the constant update request so I went ahead and rooted and installed CWM without incident, then I decided to install the Stock rooted update from here, however when I insert my SD cards they say they are unavailable. So I stick my 2gb in my laptop format to fat32 (should this be different?, typically it works in every other device I own) It still won't read, I did exactly as others point out in other threads but still I am stumped as to how the card is made available to the OS ? Now in a fit of frustration I pulled my 8gb out of my evo put the 2gb in and wham there it is, I put the 3.2 download on the 8gb popped it in tab entered CWM and flashed the update, I don't know if the 2gb is mountable in CWM I will try tonight but the 8gb was mountable through CWM however my 8gb also was not available to Android even after the update.
So what the heck is the use of the external SD and how is it used?
I think you might have an issue with your ROM,
I use my external SD for my titanium backups and other files I want to keep portable. I have used the SD card through my PC via USB and directly by putting into the PC's card reader.
Have you tried using a file manager? I use File Manager HD and the external card shows up as Storage on the left bar.
As for the filesystem, I think I may have originally formatted as FAT but I have also pulled my SD out of my Blackberry and used it to install Honeylicious through CWM,
All in all I dont think you should be having the issues that you are having...
Good luck
If it won't mount in CWM you need to format it in your android phone, that fixed it for me. Once it is formatted correctly you'll see a notification that an SD card is installed. Also my PC wouldn't see it until I put a custom rom on. Also to store items on it you can use a file manager to move things to and from it.
~Sent from my Droid SuperCharge~
>DARKMAN< said:
If it won't mount in CWM you need to format it in your android phone, that fixed it for me. Once it is formatted correctly you'll see a notification that an SD card is installed. Also my PC wouldn't see it until I put a custom rom on. Also to store items on it you can use a file manager to move things to and from it.
~Sent from my Droid SuperCharge~
Click to expand...
Click to collapse
The 8gb card did mount in CWM but would not mount in the OS, or when it would I would get it was unavailable or sometimes even empy when I know there is only about 1 gb free space, I did not test the 2gb in CWM mainly because it was late and I needed to go to bed, but I will try tonight. The 8gb is the one I updated to rooted 3.2 with, I still need to go to 3.2.1 ? Is there a rooted Stock 3.2.1 floating around I really havent looked much into it yet
I have noticed that getting the iconia to read some sd cards is like tossing dice..Most people who have this issue says one card works perfect in every device but not in the iconia.. Some say the card will work sometimes and not others .. Some say the card works in cwm and not with file manager..
The issue here i think is that you have two CARDS THAT ARE FUSSY ABOUT mating with the iconia. OR Your rom .i would read the threads in the rom you are using.. IF still nothing that sounds like your issue ask the DEV about this.. If STILL No luck you can either try to buy a new diffrent card or flash a new rom to try and Diag. this issue..
Good luck..
Silly question
Is your microSD formatted FAT32?
If it is anything else, your unit may have trouble reading it depending on what ROM you are using - Not all ROM's are capable of reading NTFS or other file systems.
Sometimes, microSD's freak out as well, and the only way to get it back to normal is to format it in a Symbian phone (Nokia)
Also, make sure you are using the correct mount point for the card - /mnt/external_sd - Root Explorer and other apps like it can get there.
Other than that, you may just have a bad microSD, I have had many of them die for seemingly no reason.
New here, yes I did look around. Found lots of other good info, but not this. If I missed it, feel free to remove my man card. I just got a nook color for x-mas yay me. I have followed two guides:
Well I tried to post two links but that wont work. I understand. Anyway, one guide is called How to Install CyanogenMod 7 on the Nook Color (PC Version), found it on Youtube. Other is called How to: Root a Nook Color, install CyanogenMod 7, and overclock it off of icrontic.com Hope that helps.
I am using at 8gb version to write to SD card. I copy both files over without un-ziping them. Follow all directions. However nook will not boot into Cyanogen. I just get the normal nook boot up. I have tried several times. I am new to the whole rooting thing and have seen people post different versions of the same file. Not sure if that has anything to do with it.
Lastly,
Nook firmware: 1.3
Not using a Scan Disk SD card.
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
Well I didn't know there were other options other than CM7. I have also been told that is one is the best all around one out there. You will have to excuse my ignorance but what is eMMC and uSD?
Don't worry, we all learn something day to day.
CM7 is a custom ROM (or OS if you want to call it), which replaced the stock OS by many of us. It is one of the most used ROM out there for NC (short cut for NOOKcolor)
In order to run/use CM7 on the NC, there are 2 choices:
1. Installing and running it (CM7) from the internal memory (a.k.a. eMMC) or
2. Booting and running it (CM7) from the external uSD card
You can spend the whole day searching for the difference in details, here, I just give you some quick thinking of the 2.
Running from eMMC = more complicate installation process, smooth performance, a lot less FC's (Force Close = applications hung), easy to backup, more storage. But you will void the B&N warranty since you delete their original stock OS.
Booting off uSD is a quick way to explore the beauty of CM7 or any custom ROM WITHOUT effecting the stock OS, meaning still under warranty. Down side is you need to have a 8GB or 16GB Sandisk class 4, which probably costs about $20 (onsale for 16GB).
Ok does it have to be a Scandisk sd card? I thought loading CM7 via SD card removed the warranty also. A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
K9Shep said:
Ok does it have to be a Scandisk sd card?
Click to expand...
Click to collapse
No, it does not have to be a Sandisk but Sandisk (class 4) is the best (have been tested) on the market. You can use any other brands, it might work and might not. Therefore, if you intend to run CM7 off uSD, Sandisk is strongly RECOMMENDED. If you use the uSD as an additional storage, any brand is OK.
I thought loading CM7 via SD card removed the warranty also.
Click to expand...
Click to collapse
No, it does not. Running off uSD has zero effect on stock OS.
A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
Click to expand...
Click to collapse
A lot of people mistype or mis-use the term "dual-boot"
AFAIK, there is 2 kinds of "dual-boot" (one of them is incorrectedly used)
a. Leaving stock OS on eMMC and booting CM7 off uSD.
b. Installing 2 different ROMs on eMMC.
I personally choose to say b. should be called "dual-boot", not a. but a lot of people calling a. as "dual-boot". I don't mind.
What your question is for item a.
All you have to do is during powering up, press and hold the "N" button then select booting Normal, it will boot into whatever on the eMMC (i.e. stock OS) even having CM7 uSD plugged in.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Click to expand...
Click to collapse
A very good choice. Go for it.
Note: recommend getting the Sandisk class 4.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
Click to expand...
Click to collapse
I don't know what you're doing so can't say.
What have you done?
Ok sorry it took me a little bit to get back to you guys. I work the night shift so it can be a pain and make you seem like a ghost.
So I downloaded a file called 8gb_clockwork-0.7. Used a program called Win32 Diskmanager to write that file to the SD card. I have an 8gb SD card. Not Scandisk.
I then copied over two file that are .zip files. I did not un-zip them. Files are gapps-gb-20110307-signed and update-cm-7.0.3-encore-signed.
I am using my phone as a micro SD card reader. Could that be causing issues?
Everything I read said to do what I just said/did. I then pop in the SD card into the nook. My nook then boots up normally, I.E. standard nook OS.
Any help would be greatly appreciated, thank you.
Again, it goes back to my question in post #2.
Before getting an answer from you, I cannot provide any more help.
In fact, I don't want to guide you through the wrong direction.
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
K9Shep said:
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
Click to expand...
Click to collapse
I assume you meant to run CM7 off uSD (you said USB drive???)
Anyway, if that's the case, what you have done was incorrect.
Forget about it, start over again.
With your not Sandisk uSD card, I wouldn't recommend but if you have to use it, then go with it for now.
1. download "win32diskimager" (I hope you already it)
2. download the "Size-agnostic SD" v1.3 imager from this link: http://forum.xda-developers.com/showthread.php?t=1000957
3. try this ROM (build 12122011) as many others like it from this link: http://forum.xda-developers.com/showthread.php?t=1344873
4. download this GApp (20110828) for CM7 from this link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
5. try to follow verygreen's instructions from the link that I posted in step 2.
If you not able to or hitting issue, get back here for more help
Will do. Thanks again for all the help. Also yes I did mean uSD :/ I will try this Wednesday during the day and get back to you as I am about to start another shift.
Ok, here's my case laid out. I've searched the forum to death, so I'm pretty sure what I have here is a head scratcher so I'm hoping someone can help me out.
I bought a used HD2 off craigslist. It came with WP7.5. When I plugged in the data cable (i.e. USB cable), I didn't get a prompt for mounting to SD card. I installed Zune and got all the drivers (going through the MS troubleshooting list), and the phone was able to mount to Zune with only 200 mb. No problem, right? This error is common. I find out that if I use an SD Formatter, I can clear the card, which is 16gb, back to it's original state by mounting the card through MAGDLR.
After restarting the phone, I still couldn't get more storage than the allotted 200 mb, except it had decreased to ~150 mb. My phone was filling up quickly. I researched that, under WP7+, there should be a "connections" option under settings for mounting the SD card through the cable, so I thought "Hey, maybe it's because this flash of WP is missing something." so I reflashed my HD2 to stock rom using a guide.
While as a stock HD2 (T-mobile), I had now 600 mb of space on the phone to use, but I noticed that the HD2 still wasn't sensing my card. Bad card, maybe? So I tried an 8 gb I had, a 2 gb I had, and a 32 gb I KNOW works from my tablet (and still works on my tablet). I decided maybe it was the ROM's fault, so I decided to flash android on it, since I'm used to android from my other phones.
So I follow Jayce's guide and put on the proper HSPL, MAGDLR, the right Radio, and CWM to flash a new android ROM and banish my problems once and for all.
PROBLEM, I'm stuck here because (dope!) even MAGDLR and CWM DO NOT SENSE MY CARD(S). Now I'm stuck and I don't know what to do. Is there a way to get it running at the very least? I know the microSD slot is pretty much the most reliable piece on the phone, so I don't think it's broken.... but maybe it is?
So either a) somebody help me get the phone running with any ROM or b) somebody help me figure out how to get the SD cards working.
Sh*t out of ideas here.
[edit] OK! I FLASHED IT USING THE OL' HOLD DOWN THE "DOWN VOLUME BUTTON AND FLASH THE STOCK" Could still really use help with the SD card sensing thing though....
it wouldn't be the first bad sd card slot reported here, so, reliable it may be, break proof it isn't.
samsamuel said:
it wouldn't be the first bad sd card slot reported here, so, reliable it may be, break proof it isn't.
Click to expand...
Click to collapse
Okay, following what has to be my 5th reformat of the same card, it worked!!!!! I quickly installed android on it. I'm not taking that card out anymore. It'll stay inside
xubii said:
Okay, following what has to be my 5th reformat of the same card, it worked!!!!! I quickly installed android on it. I'm not taking that card out anymore. It'll stay inside
Click to expand...
Click to collapse
I had a bad SDCard too, it doesn't work in recovery but does in the ROM... I think you should really think about replacing your card. Flash memory has a limited amount of writes, so I wouldn't be surprised if you lose your data or find it unusable one day.