I just got my nook touch and it seems to be bricked, stuck at the rooted forever screen. I booted from the noogie.img and took at the partitions and got the error no media found. I think I've got a serious problem here. Is there anything that can be done?
1. Turn off Nook holding power button for 30 seconds (screen still "rooted forever").
2. Remove SD.
3. Turn on.
Related
I originally was trying to flash CM7 using a SD bootable version of CWM 3.0.2.8 and it wouldn't boot at all. So, after a bit of searching, came to find out my refurbished Nook was one of the "new" ones with the partition change and was told that custom ROMs won't work on it yet.
I then got a CWM flashable 1.2 stock ROM and flashed it back to stock. Now, it won't boot past the N screen. I tried holding the power and N button to get into recovery to restore it, but that process freezes up half way through.
Next, I tried the 8 times boot interrupt (which is only 4 on my Nook btw) and it too freezes up part way through while "Clearing Data".
Any ideas on where to go next?
Nevermind, problem fixed. Whew, I went from having a Nook that wouldn't even power on this morning to a fully restored one.
Turns out I needed to have the power adapter plugged in while doing the 8 boot interrupt process.
HI, I believe it was the .14 update it asked me to update, but after downloading and unzipping, its been stuck on the Acer screen with Booting Recovery Kernal Image on the top left corner for over 4 hours. Can I try to turn off the tablet? Not sure what to do here. Thanks for your help.
This most recent update bricked my Iconia Tab as well. The recovery splash screen loaded, then after a few minutes that hung (the animation froze), and now any attempts to restart the machine go as follows:
Acer logo splash
Android splash
The main interface opens on "Android System", and the Tab immediately goes to shut down.
I'm completely locked out at this point. The shutdown does not turn the Tab off, it's just hung. I can force a shutdown, but restarting puts me back at square one. The reset button will shut down the machine and restart it but that's it.
The power gauge shows that battery to be completely drained, despite the Tab being plugged in long enough to be more than fully charged, and I had no battery issues as of yesterday before the update.
Plugging the TAB in to my desktop I can see the internal drive, I can copy from the internal drive, but I cannot write to or erase from the Tab.
At this point I'm at a loss as to how to interact with it to reset the settings.
My tablet screen froze when I was using it. I pushed the reset button after the screen was unresponsive for a few minutes and it wouldn't go past the boot screen. I went into recovery but was unable to mount anything. Doing a little research I went and wiped the data but it still wont boot. I used APXflash tool, entered by SBK, and now the tablet turns on but no boot screen, no recovery, nothing.
Does this sound like the memory died, or am I making it worse by trying to fix it. I was running cwm recovery and omni rom light when this all went down.
Any help?
Where to begin, well I'll start with the most pressing issue. While flashing the oldbootloader it was disconnected from the USB (USB cable needs to be held a certain way for it to conect to the tablet) and froze on the bootloader screen so I held both the power and volume down buttons to reset it. The problem is that now I'm stuck with a black screen however when I plug the tablet into my PC it makes the noise to notify my that there is a device plugged into it but it doesn't recognize the nexus. I was restoring the tablet because it switched of yesterday for no reason then began to bootloop when I turned it back on so I went into cwm recovery and got the "E:Can't mount" error. That is what led me to restore the tablet and how I got here, with a black screen nexus that connects to PC but isn't recognized an can not be booted into recovery mode. Can anyone help or is this hopeless?
Also the device was running 4.4.4 kitkay and was rooted before all of this.
Hi guys,
My nexus 10 suffers from a weird power issue. Because when i turn it on it shows the google splash screen, but after few seconds it flickers and will turn off. I turn it on again, then the same problem occurs for the Nth time. Then if I try to boot into custom recovery (TWRP) the same flickering and shut down happens. Both I tried with and without the charger connected to the tablet..
But when I try to boot into bootloader, bootloader mode is normal, the screen does not flicket and stays on (maybe until the battery depletes its juice).
Does anyone also experienced this? My Nexus 10 is running on Android 5.0.1. Can someone help me to revive my tablet. So many precious pictures of my baby is saved on the internal memory of my Nexus 10.
How can i back-up those precious photos and other files from the tablet to the pc via bootloader mode? I supposed, It might make my tablet back to normal function again if i reformat it.
Help me please.
Thank you guys!