Hi there!
I have noticed a strange thing on my omnia 7 lately.
When I'm listening to the radio over the headset and there is an incoming call, the ringing sound does not play over the earphones. Instead its playing on the normal loudspeaker on the back of the phone.
When receiving sms or messages, the sound plays over the earphones.
My question is:
Feature or Bug?
Did anybody else notice this strange behaviour?
Thanks in advance,
aur0n
same here, olso with my bluetooth headset
(i've got mango)
daddyrazzy said:
same here, olso with my bluetooth headset
(i've got mango)
Click to expand...
Click to collapse
YEs...this is bloody annoying, and it feels like a remnant from the Windows Mobile(dis)functionality.
ok good to hear im not the only one with this problem
bad thing about it: apparently it doesnt change with mango =(
maybe contact samsung
Related
Been having a problem on my XDA II in that when I receive a call and answer it, it takes a few seconds before I can hear the other person. Sometime it woks fine and others the person can hear me but I can't hear them ?
It has been back for repair 3 times and it still does the same thing. The speaker is fine as it works loud and clear, it's only on incoming calls not on outgoing.
The place where I have bought it will now swap it out for a XDA IIi as you cant get the II anymore around here. That's great but I would still like to know why it went wrong ? Anyone got any clues ?
plz explain what is delayed.
Could it be just too much s/w running?
I found that when I am running activesync, calendar & contacts sometimes there is an awful delay in the response of the MDAII. Especially the BT headset has delays then of more then 20seconds (so I answer call on MDAII and then transfer it to headset when this occurs).
delay on phone
:shock: Me too!
Not sure if I should answer on screen,accept or reject,or green button.Both seem to delay,often with caller ringing again.
When the phone rings and you answer it. You hear nothing. It's a case of hello ? hello ? etc. They can hear you but I can't hear them then all of a sudden their sound will just kick in.
Actually sometimes when I dial out, I never hear a ringing tone and all of a sudden the person cuts in.
There is a delay. I have no software running at all. It does this from a hard reset as well.
What bugs me is that it has gone back 3 times and they claim it has been tested and fixed. It clearly hasn't.
Hope the XDA IIi is better, cos this was very annoying.
Hi Ekko,
Would you happen to be running Pocket Bluetooth Tools?
Cheers,
Pete
Hi, the phone was fine until about 6 mths old when it started doing this. I had Pocket Bluetooth on it and it used to be totally fine. This never affected it at all.
Obviously once this problem arose, I have hard reset the machine on a number of occasions and have used it as a clean machine. Same problem ? So not down to Bluetooth Tools.
Hands Free mode
In order to use an Himalaya with a BT headset you need to run 2.20 translated. The Hands Free profile works better and it will even support caller ID and there is no delay when answering calls.
Ok XDA, i have one big/huge/enormous problem,
Scenario:
Talking on the phone, using the Wired Handsfree (which came with the phone), when i get another call (call waiting) the notification of the other call is going through the loud speaker! not only that, the ongoing is immediately routed the loud speaker, anyone near me can hear the conversation clearly!!!!!!
does anyone face this?
i checked it on 2 X1s, 1 black & 1 silver and it's there.
anyway to solve this
same problem for me
I have a similar problem with a Parrok CK3100. The phone can't ever seem to decide for sure what speakers it's supposed to be using.
Sometimes I'll press the Voice Command button on the bluetooth device and the phone speaks out, sometimes the car speakers speak out.
I just don't know.
Annoying that the much, much cheaper E71-2 handles all of this with great aplomb, as did my Q9h.
any one else facing this problem people?
i started searching in order to get a clue,
the main thing i'm thinking is that it's caused the same way VOIP (including skype) used to behave using speaker phone!
what do you think?
I have the same problem with a german x1. ROM R2A.
Is there any solution for this problem
thx
walk
Fixed
Bugs Fixes (Registry):
Sound is routed to the Loud Speaker when having a phone call and get a waiting call while using Handsfree
change the key HKCU\ControlPanel\SoundCategories\Ring\Speaker to 0 (default value = 1).
added to the wiki of X1
Thanks. I've changed that setting to see if it solves my problem, too.
anyone else experienced this? what happens is that during a call while using hands free, when an incoming call comes in, it automatically shifts the current call to loudspeaker, and switches itself back one the phone stops ringing :/
funny you should say that, it happend to me for the first time today, just as you described
same for me - got a text while listening to music and found out the sound came out from the speaker :S
I had a similar but slightly different problem yesterday. I was trying to listen to music with bt headphones - the music cam out of the speaker, but system sounds were coming through BT headset.
soft reset did not help, turning off bt headset and powering it again fixed it.
I had a same problem. It was really annoying. I searched a bit and found that setting the key "\\\registry\HKCU\Control Panel\SoundCategories\Ring\Speaker" to 0 solves the problem.
shakeandbake said:
I had a same problem. It was really annoying. I searched a bit and found that setting the key "\\\registry\HKCU\Control Panel\SoundCategories\Ring\Speaker" to 0 solves the problem.
Click to expand...
Click to collapse
does that stop it ringing from the speaker altogether or just with headphones?
Just with headphones.
Cheers
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry
Hello,
I have an issue that i'm having when i call people with Viber on my Google Nexus 4. While using the phone speaker or the earpiece i hear the voice of the person i'm speaking with clearly without any audio buzzing but when i use the earphones, i'm hearing a background buzzing even before the connection is established with the person while it's still ringing. I also have a Bluetooth headset and it's working perfectly , this issue only appears when using the earphones . I've also tried different earphones without any success.
Does anybody have the same issue ?
Thank's
Can anyone try to reproduce this issue on his phone please, so i can know if it is a hardware problem and eventually send my Nexus 4 back to google for repairing.
Thank you.
mamoun1991 said:
Hello,
I have an issue that i'm having when i call people with Viber on my Google Nexus 4. While using the phone speaker or the earpiece i hear the voice of the person i'm speaking with clearly without any audio buzzing but when i use the earphones, i'm hearing a background buzzing even before the connection is established with the person while it's still ringing. I also have a Bluetooth headset and it's working perfectly , this issue only appears when using the earphones . I've also tried different earphones without any success.
Does anybody have the same issue ?
Thank's
Click to expand...
Click to collapse
mamoun1991 said:
Hello,
I have an issue that i'm having when i call people with Viber on my Google Nexus 4. While using the phone speaker or the earpiece i hear the voice of the person i'm speaking with clearly without any audio buzzing but when i use the earphones, i'm hearing a background buzzing even before the connection is established with the person while it's still ringing. I also have a Bluetooth headset and it's working perfectly , this issue only appears when using the earphones . I've also tried different earphones without any success.
Does anybody have the same issue ?
Thank's
Click to expand...
Click to collapse
Known issue. You probably buzz all the time. Search earpiece buzzing/crackling.
ace7196 said:
Known issue. You probably buzz all the time. Search earpiece buzzing/crackling.
Click to expand...
Click to collapse
No it seems finally to be a proximity sensor problem because i was able to reproduce it with an application which turns off the screen even when not incall and the buzzing appeared while listening to music !!! It was this topic which made me "smell a rat" : http://forum.xda-developers.com/showthread.php?t=2129140&highlight=proximity
Then i decided to disable the proximity sensor since it will solve my problem and still i can use lock unlock during a call, so i tried the build.prop solution : http://forum.xda-developers.com/showthread.php?t=1626611 without success
and then i tried this http://forum.xda-developers.com/showthread.php?t=1658474 without success too.
Any idea please to help me solve my problem ?