Database Users

Strange error with my HD display!

Hi friends,
Please give me advices on this situation.
I bought a HD since 05/2009. I installed many cooked ROMs and it still fine until now.
When i've turned off the screen with power button and then turned it on, the screen still black, but i still can touch on it and it vibrate each time i touch. I tried to soft reset by push reset button at the back, pull out the battery .... The screen is always black, but the phone can start up and vibrates when i touch on the screen.
I thought the screen consist of 2 parts, one for displaying and one for touching. And the displaying part is died.
Then i connected it to PC in order to re-install with the ship ROM, and so strange, the screen work again right after i plugged the cable. But i still re-installed it with the ship ROM. But the error came back many times in few days later. And sometimes the method "connect to PC with cable" didn't work.
When feeling hopeless, i left the phone alone in some days and the screen suddenly works.
And now it has just turned back again and i dont know if it will be back or i must have it repair. (There is no warranty service for HTC in my country.)
Thanks for reading, i know that my English is terrible.

Check the backlight adjustment. As ridiculous as it may sound, with a rom I had it sometimes went to zero light on its own. Plug it and make sure that all settings are to maximum light, with the automatic function disabled, and see if it happens again.

Rizlo said:
Check the backlight adjustment. As ridiculous as it may sound, with a rom I had it sometimes went to zero light on its own. Plug it and make sure that all settings are to maximum light, with the automatic function disabled, and see if it happens again.
Click to expand...
Click to collapse
Thanks for your advice. I will do as you said and do pray

snowinjune said:
Thanks for your advice. I will do as you said and do pray
Click to expand...
Click to collapse
It's not work, ;(

snowinjune said:
It's not work, ;(
Click to expand...
Click to collapse
This happened to me once and I removed battery and left phone overnight. In the morning I insertedbattery again and problem hasn't materialised since.
However, if your issue keeps returning it looks like you would need to get phone fixed under warranty as it sounds like a loose connection between motherboard & LCD screen

Fallen Spartan said:
This happened to me once and I removed battery and left phone overnight. In the morning I insertedbattery again and problem hasn't materialised since.
However, if your issue keeps returning it looks like you would need to get phone fixed under warranty as it sounds like a loose connection between motherboard & LCD screen
Click to expand...
Click to collapse
I'll try with your advice . Thanks

Yeah but the fact that sometimes plugging the device to USB brings it back sounds like software to me. Anyway, I hope you find a way to fix it!

Fallen Spartan said:
This happened to me once and I removed battery and left phone overnight. In the morning I insertedbattery again and problem hasn't materialised since.
However, if your issue keeps returning it looks like you would need to get phone fixed under warranty as it sounds like a loose connection between motherboard & LCD screen
Click to expand...
Click to collapse
So sad, the issue occurs again when i need to make an important call. It drives me crazy because i were on the street and i must went to a post office. Then i realized that i do not remember the phone number.
I must get it fixed at weekend then i may sell it away. I'm dreaming of HTC Leo but maybe i will come back to my old iPhone 2G until Leo's price drops.
Thanks all for your help and listening.

Sorry to hear of your problems
If it was me, I would send the phone away on warranty and just use your iphone in the mean time.

snowinjune said:
So sad, the issue occurs again when i need to make an important call. It drives me crazy because i were on the street and i must went to a post office. Then i realized that i do not remember the phone number.
I must get it fixed at weekend then i may sell it away. I'm dreaming of HTC Leo but maybe i will come back to my old iPhone 2G until Leo's price drops.
Thanks all for your help and listening.
Click to expand...
Click to collapse
I'm sorry, but I think you have the same problem I had, the only solution was to send it to Tech center.
Take a look at this post (in french cause, i'm french ^^) http://htc-touch-hd.forumactif.biz/problemes-hardware-f6/sav-ici-on-parle-du-sav-t4061.htm
It describe all the symptoms I had, with some pics.
Hope you will fix it

X3n0n said:
I'm sorry, but I think you have the same problem I had, the only solution was to send it to Tech center.
Take a look at this post (in french cause, i'm french ^^) http://htc-touch-hd.forumactif.biz/problemes-hardware-f6/sav-ici-on-parle-du-sav-t4061.htm
It describe all the symptoms I had, with some pics.
Hope you will fix it
Click to expand...
Click to collapse
Thanks for your helpful info. I used google translate to read the post i found these info:
HTML:
Failure diagnosed by the technician:
- Pas d'allumage - No ignition
- Connecteur kit pieton deffectueux - Headset connector scientifically sound
- Defaut esthetique. - Cosmetic defects.
Pieces remplacées : Parts replaced:
- Carte mere - Motherboard
- Etiquette de violation - Etiquette violation
- Etiquette font de poste - Labels are post
- Nappe Systeme. - Tablecloth System.
I live in Vietnam, as i known there is no HTC warranty service in Vietnam. I bought this phone on a trip to USA. Base on your experience, i think i may pay a lots to fix it in VN. I will bring it to a repair shop at weekend and ask for the cost.
Ha ha, bad luck for me.

No charge, no sync - loose MHL cable port.

Only had mine 3 weeks and its broken already. I have been using a desktop charger and have not been forcing it in at all, not once, I have always been very gentle inserting it it, anyway it no longer charges, it looks like the connectors have pushed themselves back so they are not flush anymore and thus no longer connecting to charge or sync.
Not happy about this at all, I had my desktop charger for my HD2 for 18 months with no problems at all, this suggest a very weak connector.
!!! BE CAREFUL !!!
Going to call in at Phones4you and see if they will swap it, I don't hold out much hope though.

Wow bad luck man, but really you don't need the F word to express your frustration.

stoolzo said:
Only had mine 3 weeks and its broken already. I have been using a desktop charger and have not been forcing it in at all, not once, I have always been very gentle inserting it it, anyway it no longer charges, it looks like the connectors have pushed themselves back so they are not flush anymore and thus no longer connecting to charge or sync.
Not happy about this at all, I had my desktop charger for my HD2 for 18 months with no problems at all, this suggest a very weak connector.
!!! BE CAREFUL !!!
Going to call in at Phones4you and see if they will swap it, I don't hold out much hope though.
Click to expand...
Click to collapse
was it an official desktop charger or 3rd party?

DO a factory reset using code *2767*3855#
(please not this will wipe everything including built in memory, so do backup before you proceed. Backup possible by moving content of internal memory to SD card by copy paste in file manager)
I had a problem when my phone stopped charging after I upgraded firmware, It would also launch Connected to computer screen when it wasnt . Thought its dead.
Did factory reset using this code and its working flawlessly ever since. Seems to be some kind of bug which happens out of nowhere as 2 people I know have experienced this after upgrading to KE2.

stoney73 said:
was it an official desktop charger or 3rd party?
Click to expand...
Click to collapse
I was going to ask exactly the same thing...

I think the OP means that the micro usb receptacle has come away from the board and has been pushed back into the body of the phone. I hope this is not going to turn out to be a common problem as it's something that seemed plague to the Nokia N900 and it took ages for Nokia to acknowledge a design/production fault.

great advice, now it wont boot at all, just goes round in circles....
F**cked.....

anyone got any ideas?

Hi, the charger isnt really the issue, i haven't had any problems inserting the phone into the charger, ie no resistance which suggests to me it was week or loose and has gradually pushed it self back over the last 2 weeks since I have had the charger. If thats the case it would have done this with any charger or cable.
Just spoke to phones4you, they are going to exchange it for me, they didnt even grumble after I told them what happened which I thought was odd, heading off now to pick it up.

Will be interesting to see if your wifi is any better on the new phone stoolzo. Maybe you could let us know. Thanks.

good old phones4you
got it already, yes I really have. Phones4you are just round the corner in PC world. Will check my wifi tonight and report back on the other thread.

Please change the thread title. All type of people view xda.
Sent from my GT-I9100 using XDA App

remove and reinsert battery
i had this issue when running custom kernels. somehow doesnt happen with stock.
issue happens like this:
u go to bed while charging
u wake up and the phoneis off or very hot with battery and temperature warning
u reboot and it doesnt reboot, doesn't boot, just goes in circle battery display/reboot cause it doesnt seem to charge neither have enough power to boot.
removing battery + cable then putting both back = it boots again and charge normally

stoolzo said:
Hi, the charger isnt really the issue, i haven't had any problems inserting the phone into the charger, ie no resistance which suggests to me it was week or loose and has gradually pushed it self back over the last 2 weeks since I have had the charger. If thats the case it would have done this with any charger or cable.
Just spoke to phones4you, they are going to exchange it for me, they didnt even grumble after I told them what happened which I thought was odd, heading off now to pick it up.
Click to expand...
Click to collapse
************************************************************
Yeah, did all the usual things, I have bricked phones before and always managed to turn them around but we have no CMR to flash anything from ROOT/SD so when it wouldn't boot after a factory reset I knew I was in trouble
The MHL port being loose was the tell tale sign of a fault as I hadn't misused it at all. When I compared it to my new phone I got today it was defo a little further back, just enough to prevent it connecting.
Good old phones4you, fault report to phone exchange in under an hour, impressive.
Just in case the charger had anything to do with this I am going to get rid, dont think it did but I don't want to risk it.
its this one:
http://www.mobilefun.co.uk/desk-dock-for-samsung-galaxy-s2-i9100-p29488.htm

[HELP] my Omnia7 will not stay in standby! it switchs on alone

Hello guys,
I have a very strange but really bad problem: my omnia7 can't stay in standby.
When I press the power button, to turn off the screen and go in standby (so not the full turn off), my Omni7 wakes up alone, going on the unlock screen. In the same time, the phone rings with the ring that is played when you connect the phone for charging.
I've tried reboot, reset, hardreset, removing the sim-card, turning on/off "battery saver options" ... still that issue :crying:
Anyone has an idea?
I've flashed with a cooked rom (xda-devs Omnia7 Tango V4.0)
my current config :
OS version : 7.10.8779.8
hard version : 3.1.0.4
soft radio version : 2424.11.7.2
hard radio version : 0.0.0.800
loader version : 4.10.1.9
SOC version : 0.36.2.0
Thanks to any ideas, because that problem is killing me

my phone started doing this late last night too! i thorght it was because rain had gone into the power socket but if others are having same problem at the same time maybe not?
has your phone been exposed to water at all recently? is your phone jailbroken? cant realy think of other reasons
the problem stops when the phone is plugged in. is there anything that can trick the phone to thinking it is on charge? I have wphtweaks installed but the options there are not able to stop it

Hi,
I can't remember if my phone has been wet :/ I take care, so my phone never received water. But when I'm outside, under the rain, it's possible.
Today it was better, just a few times my phone wakes up alone.
I'll give you feedback in the next days. Let me know about yours

I managed to trick my phone into silence a few times earlier but it was difficult and then only lasted 5-10 minutes.
if yours didnt get wet it seems unlikely to do with water but I left mine ontop of the aga after removing the battery and over a relativly cool part. A few hours later and it seems to be working fine now.
I will report back if the issue arises again.
EDIT: Ahhhh!! STOP THE RINGING!!! started again this morning

Mine too !
This morning ... the ringing awakening problem !!!!!
But it was better this afternoon.
Really I don't know what happens.
Are we only two persons in the xda world with this problem????

this is realy weird now! mine was doing it in the morning but since about 12pm - 1pm it has been fine! I feel like its something to do with an installed homebrew app maybe.
I also have a custom rom but mine was flashed a long time ago and much older than yours. not sure which version
EDIT (1:10pm GMT): no problems since yesterday
EDIT2 (1:30pm GMT): again i spoke too soon!

Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.

Hi Wuzzok,
what do you mean by "bend USB pin" ?
Anyway, it seems like it's finished for me. I didn't get tht strange bug (soft/hard bug???) for a very long time. I just hope it's really over !

Same problem
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...

actual state
neutom said:
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...
Click to expand...
Click to collapse
Samsung sent me an offer to send the phone in for repair - but what should I say, the problem solved itself. For two days now the phone works normal again. So I had to cancel the service call .

mine hasnt done it in a long time either. looks like its just a temporary thing. I wonder what caused it! For me it started after I was using my phone in the rain and the usb slide was open so thats my suspect.

You may be right. Mine is "quiet" now, since a long time. Water may be the cause.

Update
Hi folks,
mine is mostly quiet again, too. Only few incidents "happen" but they do not last very long - only a few minutes. It's somehow spooky but I do not want to send it in to Samsung now when the error it not constantly reproducible.
I agree with you that there might be a correlation with humidity although I am sure that it did never get wet and I almost always keep the USB-shutter closed. Who knows ...

Sent it in
Finally I sent it in for repair today. It started ringing permananently two days ago...
Now I have to wait and see.

Final state
Okay, I received it back... and it works.
First they did nod find and could not reproduce the failure and wanted to send it back - only with a new flashed image - but fortunately the technician called me and I could describe the problem again. After waiting a few hours, the fault appeared again and they decided to change the mainboard.
I hope, that's all :laugh:

Hello,
Me too it makes me after my omnia 7 is dropped in water, but problem solved.

Me too
WuzzoUK said:
Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.
Click to expand...
Click to collapse
Are you really sure that the problem is USB port.. Mine too behave like this. I've tried to remove battery, factory reseting, reflashing ROM. But nothing works. Mine is Samsung focus

post to remove

problem with optimus 7 device. would appreciate the help

Hey,
So here`s my problem.
2 days ago my phone just switched off, no warning, no nothing, and won`t switch on ever since.
I already looked around for people that may have the same problem, but every thread talks about the device that won`t go pass the logo screen. It is not my case. My phone doesen`t even show the logo screen, nothing. You can press the power button for as long as you want, it just won`t start. At occasions, it starts up by itself, only for a minute or two and then turns off again.
At first i thought it may be a software problem, so I`ve cold started it and reset it but it didn`t make any difference.
After, I`ve thought... maybe a battery issue, so I`ve talked with a pal that has the same device, switched batteries. Apparently his phone started with my battery just fine, but mine didn`t work with his either.
Does anyone have a clue about what`s happening?.. If yes, please do share. As much as I like having a phone with a mind of it`s own.. it`s just not dependable XD
Thanks

Probably just broken / defective - if under warranty go and ask for repair or replacement (money back probably). If not under warranty sell as broken or throw to the bin - not to worth repair in my opinion.

I spend the same thing to my myself, LG stinks.
Sent from my HTC ONE V using xda app-developers app

Thanks for answering.
Yes, it was a problem with the motherboard.. got it fixed on warranty. Now I barely use the phone, of fear that it will break againXD. Looking forward to selling it while it`s still functional.

exousus said:
Thanks for answering.
Yes, it was a problem with the motherboard.. got it fixed on warranty. Now I barely use the phone, of fear that it will break againXD. Looking forward to selling it while it`s still functional.
Click to expand...
Click to collapse
I've got mine just back from repair (second time). It use to randomly reboot, now I hope it got repaired ("faulty electronic components have been replaced" - but I don't know what exactly). What I realize is MAC address change. But as they changed firmware from 1.1.8.10 to 1.0.16.10, I wonder if that's why it has new MAC? Does new MAC address means that some component was replaced ? IMEI does not change.

Dead spots on screen...

Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2

Warranty exchange..

Wish I could... Bought the phone through tmobile and I'm getting the run around.
Sent from my Nexus 4 using Tapatalk 2

I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app

Nexus 4 touch screen defect (dead zone, phantom touch)
I have the same problem, I have a permanent ~1cm tall dead zone spanning the width of my Nexus 4, right about the location of the SIM card tray.
On occasion it is not a dead zone, but rather a "very haunted zone" where there are MANY phantom clicks/drags on different areas of the dead zone in VERY QUICK SUCCESSION. When this happens I have found that constantly resetting the phone (maybe 5-6 times) until it returns to normal (see: dead zone) is the only way to fix it.
That whole situation can take up to an hour to sort out, especially since during the orgy of phantom clicks/drags on the dead zone, the touchscreen is essentially a write off and turning it off is next to impossible, meaning that my phone is bricked for a portion of the day. This happens arbitrarily about once every 5 days.
I purchased my phone from Australia one month ago. Was not aware of any problem until I had returned to where I am currently living in China. I'm absolutely gutted that my first android experience has soured, especially after shirking apple because of (living through years of) their own hardware/software issues.
Why can't I just have a quality, working piece of tech?
So far the warranty options available:
1) Store I bought it from says: Send it to LG Australia (1 non-international warranty)
2) Google says: No google store purchase number, no return
3) LG China? - Can't find any information about LG warranty claims in China.
If I send it back to Australia for repair I will be waiting without phone for weeks, AND I'll get taxed at least $100 by greedy China customs when the phone comes back in. (not to mention the postage there and back)
The problem has become worse and worse as have used the phone. Can any of ye android bros possibly offer any sort of advice or even better, a fix, for solving this problem?

tobiakazmer said:
I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have this right now. It's about a third of an inch located near the middle of the screen. It spans the entire width of the screen.
I sure hope it's just a software and not a hardware issue. I bought this in the US and I am now halfway around the world.

I had the same problem. For me it was right where the middle row of keys on the keyboard are or where the ring is on the lock screen.
5mm thick bar across the screen. I sent it back to be fixed and it's been fine ever since touch wood.
They replaced the entire screen on mine. This is definitely a hardware issue. I did a factory reset before I sent it back and the problem was still there.
Digitiser is too close to surface I think causing problems.
Sent from my Nexus 4 using xda app-developers app

Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too

Hey!
denpeirazei said:
Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too
Click to expand...
Click to collapse
This really worked for you?

em.faris said:
This really worked for you?
Click to expand...
Click to collapse
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.

denpeirazei said:
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.
Click to expand...
Click to collapse
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4

em.faris said:
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4
Click to expand...
Click to collapse
Had the same touch screen issue for months; had a dead spot in the middle of the screen that would interfere with browsing and games.
Updated OTA to stock KitKat just last week and the problem went away. Hope you guys get lucky as well. :cyclops:

Possible Deadzone fix!
capcanuck said:
Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Ok... i created an account here because ive had this same problem for the past month at least, but I think i found a fix. It may take a few people to try it as well to see if its definitive.
I have the same 1cm high deadzone spanning the width of my device just lower than halfway from the top.
My troubleshooting led me to this: If its hardware, its only because the software is telling it something it shouldnt be. I'm sure nothing is broken (i.e., from being dropped, etc.) Something is wrong, for sure, but not broken per se.
I took screen shots of temperature and voltage (using CPU-Z app) trying to figure it out. I paid attention to when it happened and when it did not. I boiled it down to two possibilities: temperature and/or voltage (i can explain how i came to this conclusion if you want... would take a bit more explanation).
I charge my phone with the charger plugged into the wall typically. I live in asia so the voltage is a lot higher (but within the appropriate range of the phone). Yet, lately when i go to sleep, I plug my phone into my laptop to charge, rather than the wall... when i wake up the problem isnt there. About 2 hours later or so the problem comes back.
I tried this for a week (charging my phone with my laptop) and the problem is dissipating. As quickly as it escalated (getting gradually worse) it is now getting gradually better.
Try it and see if it works for you. At night when your phone is nearly dead, charge your phone with your USB port attached to your laptop. Try this for a few days. Maybe it will help. Im still troubleshooting specifics to see if it is definitive.
UPDATE: today, the day of writing this, i haven't had the problem at all and it's been nearly 7 hours and the 3rd consecutive night of charging with USB on my laptop.
Nexus 4 - 4.4.2

My dead zone appeared post-Lollipop update
I created an account for the purpose of also reporting this "dead zone" issue.
I elected, on the Tuesday before Thanksgiving, to opt into the OTA Lollipop update. During the process of updating, I noticed my battery drained all the way to 0, while I thought nothing of it.
When the update was complete, I started to notice a dead zone in the middle of my screen when in portrait mode.
Actually, my dead zone spans an inch of my screen.
I have performed several hard resets, soft resets, learned about the ADK & adb, and downgraded all the way to 4.2.
I took the phone, this morning, to a cell repair shop and the technician said that it's not a hardware issue (although I'm not sure he's right).
So, that's my story. If I find a solution, I'll post it.

these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...

Any new ideas for this post? Or is it dead.

Shubhamqweasd said:
these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...
Click to expand...
Click to collapse
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....

ok got the dreaded dead spot where the sim card is, i can't unlock my phone. i dont have usb debug enabled, i can push/pull files in recovery but not much more.
ive tried to change the dpi to move the pattern away from the dead zone by editing build.prop manually and pushing it to the phone but cm13 doesn't seem to take the change to build.prop so the dpi is stuck at 320.
now, im trying to set up usb otg and unlock my phone using a wired mouse and y-cable. but quanta doesn't have otg for marshmallow enabled out of the box and i dont have root access to enable it in an app.
is there a file that i can edit and push to the phone to enable otg_hack?

techparkour12 said:
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....
Click to expand...
Click to collapse
Did you ever try this?

buffering.... said:
Did you ever try this?
Click to expand...
Click to collapse
i did it, battery has nothing to do with the screen, its better to just replace it.