Database Users

Questions and Answers Section for BA Forum. Post Your Questions Here.

@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.

Reserved for future use.

Post Stickied Per Request...

Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.

hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok

homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads

My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?

by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony

If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!

Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((

@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.

markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.

Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.

markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice

Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?

raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.

all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....

loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.

markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.

Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.

htc hd broken display

I'm very disappointed, I'm having problems again with my htc hd. At first it blocked and it wouldn't want to turn on. I sent it back twice under warranty with the same problem and in the end they replaced the motherboard.
I thought that now that practicly i have a new phone i won't have any problems with it. But surprise! The display just got crazy. When i touch the screen in a spot it activates in a completely different spot. It's the same thing on the entire screen. Check out the video.
Anybody had this problem? Oh, by the way the phone didn't managed to fall from somewhere, or get hit by something or anything else.
PS: Next step: htc snap. No touch, no worries. I hope so.

shobo said:
I'm very disappointed, I'm having problems again with my htc hd. At first it blocked and it wouldn't want to turn on. I sent it back twice under warranty with the same problem and in the end they replaced the motherboard.
I thought that now that practicly i have a new phone i won't have any problems with it. But surprise! The display just got crazy. When i touch the screen in a spot it activates in a completely different spot. It's the same thing on the entire screen. Check out the video.
Anybody had this problem? Oh, by the way the phone didn't managed to fall from somewhere, or get hit by something or anything else.
PS: Next step: htc snap. No touch, no worries. I hope so.
Click to expand...
Click to collapse
Could be that your screen alignment is not setup properly. Have you tried setting this up?

had EXACTLY the same issue. left my touch for an hour and when I cam back to it it was like that.
I sent it back to HTC and the first time they cancelled my warrenty because it had "illegal" software on it. I had Hardspl on there, nothing else.so when got it back I returned it to its origanol configuration and sent it back again. Its interesting you got a new motherboard in yours as they claimed that was the fault in mine and told me it was BER (beyond economical repair)
I am not going to accept their bull%$$^ and if it comes back again without repair i shall resend it again & again (cost me nothing) until either Carphone Warehouse replace it under warranty or HTC fix it under warranty. My phone was less tha 2 months old and NEVER been dropped or mishandled. It was in pristine condition
Simon

alchopop said:
had EXACTLY the same issue. left my touch for an hour and when I cam back to it it was like that.
I sent it back to HTC and the first time they cancelled my warrenty because it had "illegal" software on it. I had Hardspl on there, nothing else.so when got it back I returned it to its origanol configuration and sent it back again. Its interesting you got a new motherboard in yours as they claimed that was the fault in mine and told me it was BER (beyond economical repair)
I am not going to accept their bull%$$^ and if it comes back again without repair i shall resend it again & again (cost me nothing) until either Carphone Warehouse replace it under warranty or HTC fix it under warranty. My phone was less tha 2 months old and NEVER been dropped or mishandled. It was in pristine condition
Simon
Click to expand...
Click to collapse
If you have removed everything illegal from phone, i.e. returned phone to original SPL and rom and then returned phone under warranty, they are obliged to fix it or send a replacement under warranty as your phone is only 2 months old. If they fail to comply I would threaten them with Standards agencies and Watchdog.
Let me know how you get on.

Fallen Spartan said:
Could be that your screen alignment is not setup properly. Have you tried setting this up?
Click to expand...
Click to collapse
Thanks for the reply. The problem is that i can't get there. Is way to down and i practicly can't click it.
Is there any other way to get to screen alignment?

shobo said:
Thanks for the reply. The problem is that i can't get there. Is way to down and i practicly can't click it.
Is there any other way to get to screen alignment?
Click to expand...
Click to collapse
Couple ways:
1. Manual way by navigating to Start > Settings > System > Screen
2. By performing a hard reset. After you have performed a hard reset and rebooted device you should be prompted with a setup screen allowing you to align screen and then enter date/time.
Have you tried performing a hard reset?

Fallen Spartan said:
Have you tried performing a hard reset?
Click to expand...
Click to collapse
I just did. Unfortunatelly the problem hasn't been fixed. The display isn't working good at all.
I guess i have nothing to do but to send it back under warranty again.

shobo said:
I just did. Unfortunatelly the problem hasn't been fixed. The display isn't working good at all.
I guess i have nothing to do but to send it back under warranty again.
Click to expand...
Click to collapse
After your hard reset were you not able to screen align?

I had the same issue. Without any impact or misuse the screen started becoming misaligned. Re-aligning the screen would only work for a short time before it again went crazy - it gradually got worse until the phone was completely unusable.
It turned out to be hardware fault with the touch overlay. I sent it back and HTC repaired it under warranty.
Having searched a lot around the web, I think this is a fairly common fault.
The tricky part was doing anything with the phone when the screen doesn't work. e.g. removing the "illegal" software - hardspl and the cooked ROM. In the end I used some software called "EveryWAN remote support". This is free software that lets you operate the phone through your PC. You could try using this to get to the align screen. Good luck.

alchopop said:
had EXACTLY the same issue. left my touch for an hour and when I cam back to it it was like that.
I sent it back to HTC and the first time they cancelled my warrenty because it had "illegal" software on it. I had Hardspl on there, nothing else.so when got it back I returned it to its origanol configuration and sent it back again. Its interesting you got a new motherboard in yours as they claimed that was the fault in mine and told me it was BER (beyond economical repair)
I am not going to accept their bull%$$^ and if it comes back again without repair i shall resend it again & again (cost me nothing) until either Carphone Warehouse replace it under warranty or HTC fix it under warranty. My phone was less tha 2 months old and NEVER been dropped or mishandled. It was in pristine condition
Simon
Click to expand...
Click to collapse
Update:
I sent it back again via CPW and they put a note on my file that although the software may have been "illegal" there is no way it could have caused the fault to the phone, I also restored it back to the origonal configuration so they could see it was a fault on the phone itself and not software.
Well, to cut a long story short HTC have accepted responsibilty and givenme an exchange unit and reintated my warranty so I am happy as Larry.
All I can say id dont give up on getting satidfaction out of HTC. in my opinion they have a duty of care to us as customers even if we put "illegal" software on our phone.
Simon

Fallen Spartan said:
Couple ways:
1. Manual way by navigating to Start > Settings > System > Screen
2. By performing a hard reset. After you have performed a hard reset and rebooted device you should be prompted with a setup screen allowing you to align screen and then enter date/time.
Click to expand...
Click to collapse
3. pressing "VolumeUP" and "VolumeDOWN" and "Touching the screen" all at the same time -- gets you to align screen.
ABOUT THE SCREEN PROBLEM:
judging by the problem you have it might be that some of your digitizer wires arent working (broken or not having a proper contact) -- if the problem started immediately after you got your HD back from service, - then it might be that the guys there broke a wire of digitizer or didnt attach the wires to its connector-- Digitizer has 4 wires who connect to device (if only 3 or less wires work-- incorrect screen response and no way to align it) .... (sory for the english but I dont know all the names of the stuff i wish to mention )
I suggest you to take it to service and explain them the problem and say that it might be the wires of digitizer , because of the last service!
Good Luck!
oh and HTC Snap aint worth it- HD is best!!! you just had a bad model, which is one of thousands(you may consider yourself as a chosen one )

My display just stopped working. Completely. They changed the whole front part at warranty and now it works way faster while browsing it. It took 15 days to replace the part. Unfortunately I have other issues with the phone but I don't want to be off topic here.

SneakyR said:
My display just stopped working. Completely. They changed the whole front part at warranty and now it works way faster while browsing it. It took 15 days to replace the part. Unfortunately I have other issues with the phone but I don't want to be off topic here.
Click to expand...
Click to collapse
I RMA mine due to black screen. After they returned the darn phone (after changing the bezel and motherboard - you would think it is as good as a new phone), Wifi and Bluetooth does not work. Gonna stick right beside the router or bluetooth set to detect...
I am going to condemn HTC soon....

Hello all! i have the same problems with the screen! i align it and shortly it goes crazy! i noticed that after i flashed the energyrom with build 28011 but i dont think there is the problem..

Kristaps-K9-Lv said:
3. pressing "VolumeUP" and "VolumeDOWN" and "Touching the screen" all at the same time -- gets you to align screen.
Click to expand...
Click to collapse
Thanks, forgot that one

I have this problem, it was just this week - christmas day onwards. It's random as to the problem being there.
Bought the HD from mobiles.co.uk without cancelling the insurance.
it will always work again for a short period if I manage to get to the align screen config.
I'm running the stock rom (never flashed)
I have done some TF3D changes. (background, icons, etc.)
It can randomly decide to work again, and then randomly not work.
found out the volumer control and tap screen shortcut to the align screen config, so that should help me get it back quicker.
It's like the lower down the screen I tap, the further away it is from what actually sows on the screen. the call home back end buttons dont work when it is not aligned.
I'm in the UK and the date of the insurance letter is 15th June 2009 on an 18 month contract with O2
What should I do?

It happens more often now, and is getting annoying.
it can end up lower down the screen to now be out either above or below it
I really need help with it.
I ended up ringing the landline phone, and possibly (almost certainly) waking up people in the house struggling to turn it off.
A solution is needed pronto.
It can go wrong within seconds of doing the alignment thing

RickDawson said:
It happens more often now, and is getting annoying.
it can end up lower down the screen to now be out either above or below it
I really need help with it.
I ended up ringing the landline phone, and possibly (almost certainly) waking up people in the house struggling to turn it off.
A solution is needed pronto.
It can go wrong within seconds of doing the alignment thing
Click to expand...
Click to collapse
i have same issue. texting is a pain in the ass now . the sreen seems to shift up by 2cm or something, very annoying.
i tried realigned the screen like 20 times, saw bit improvement but still not the same. maybe bring to shop for screen replacement.

LCD Blank
Sorry, it's my first, I have a problem with my HTC Touch HD LCD, I used it as modem but suddenly it's off and I have no Picture in my Display, the Machine is Okey I think, I have tried this morning, it can receive a phone in...
anyone know what i should do with it?
Thanks

Trackball failure!

My trackball has stopped working when I try to navigate left, tried hard resets etc, looks like hardware problem.
Now I bought this phone from ebay, it is an orange one which was an unwanted upgrade. Do you think I will be able to return it to Orange or go direct to HTC, or will I be screwed!?

Your best bet is probably to ask the original seller to RMA on your behalf.
Regards,
Dave

Will try that, hopefully the seller can do it but get it delivered to my address instead. Might try my luck in the Orange shop first

Mine just gone too. Up, down and right are fine, it just won't do left...

The trackball seems so delicate, I figured this would only be a matter of time.

ballandbiscuit said:
My trackball has stopped working when I try to navigate left, tried hard resets etc, looks like hardware problem.
Now I bought this phone from ebay, it is an orange one which was an unwanted upgrade. Do you think I will be able to return it to Orange or go direct to HTC, or will I be screwed!?
Click to expand...
Click to collapse
Warrenty should be with HTC, give their customer support a try, they will probably get you to send the phone to them and have it repaired.

nicelad_uk said:
Warrenty should be with HTC, give their customer support a try, they will probably get you to send the phone to them and have it repaired.
Click to expand...
Click to collapse
HTC have agreed to a repair but I have got to send it to them so I am going to push the Orange route a bit harder first as I'd rather just have it replaced than having to wait a week or two to get it back especially as I don't have a spare handset!

Mine did the same - push the trackerdown down and left (hard). all is working again!

slideaway said:
Mine did the same - push the trackerdown down and left (hard). all is working again!
Click to expand...
Click to collapse
I can get it to scroll to the left by pushing really hard on it but it doesn't fix it unfortunately!

The trackball is now working again, but does feel a little loose. I just turned the phone on and off to fix a synching issue and suddenly noticed that I could go left...
What's happening!? Is it a software issue or a hardware issue?

dh101 said:
The trackball is now working again, but does feel a little loose. I just turned the phone on and off to fix a synching issue and suddenly noticed that I could go left...
What's happening!? Is it a software issue or a hardware issue?
Click to expand...
Click to collapse
I updated my handset to new software release on Friday PM and started noticing the issue saturday morning so I did wonder if it was software but that said I can make it work when I push it really hard so I don't think so...
Holding off on sending it for repair at the moment but guess will have to in the end!

someone on youtube have the same problem
http://www.youtube.com/watch?v=wGRM_JZy2NQ
soo is it a hardware problem or software problem ??

slideaway said:
Mine did the same - push the trackerdown down and left (hard). all is working again!
Click to expand...
Click to collapse
I also got the same problem today. It didn't work left, and you can feel that the 'resistance' from the trackball is not the same when scrolling left, so my guess is hardware problem.
BUT, when pressing the trackball hard down and then scrolling left at the same time, it seemed to push something into place again...and it now works fine!! (for now )
Thanks for the tip!

Mine wouldn't work for about 3 weeks, pressing hard didn't help then all of a sudden it was alright again and has been for a month or so!

mine stopped too but i find it funny how when i flashed a new rom (mocado) it now works fine . i am not sure it is a software or hardware fault they are quite delecate so maybe it had some dirt in the ball socket and during the process of flashing it the dirt came out.

[Q] Cant find any WiFi AP's

Hi all, I normally don't like to post questions because i feel like the answer is somewhere online, and i almost always find it. Apparently this is one of those times i can't. Bear with me as i wanna make sure i dont leave anything out.
My problem is simply that my HD2 will not find any access points when i turn on my wifi. This started happening to me with a previous HD2 i had about a month ago for no aparent reason. I had not changed or flashed anything on my phone around the time the problem happened. I figured i would ignore the problem because i had 3g anyways but then that HD2s touch screen failed so thats why i ended up sending it in for a warranty replacement.
Now i hoped that since i had a new HD2 that the problem would be gone, i mean how could it be possible that the problem would appear on a brand new phone. So i went about doing my usual. Installed 2.08.HSPL, followed by MAGLDR, followed by MIUIAndroid.com rom, same setup i had before the problem began. I made sure the first thing i did was turn on WiFi on first boot of the phone. To my suprise, No access points found. I know it is not my router as i have connected every other device im my house to my router, including other androids and windows phones. I thought maybe its a MAGLDR/Android issue. Flashed back to WinMobile 6.5 and still no acess points. Tried every radio available and still no access points.
Bottom line is im really confused how this can be with a brand new phone. Im pretty sure its a software issue but im out of ideas.
SO please if anyone can help. Please :'-(.

Just found out this morning that it can find my access point, but only if i literally lay it on top of my router. if i go more than maybe a foot away from it then nothing.

It sounds like a hardware issue. I read about these things having issues with a connection to the antennae that can be solved by taking apart the phone and cleaning some leads.

joshnchen said:
It sounds like a hardware issue. I read about these things having issues with a connection to the antennae that can be solved by taking apart the phone and cleaning some leads.
Click to expand...
Click to collapse
Sounds strange that such a new phone would have a hardware issue already. at this point though, im willing to try anything. how/where exactly would i clean/find these leads?

Check this: forum.xda-developers.com/showthread.php?t=834199 and this: forum.xda-developers.com/showthread.php?t=1190180, but be aware that opening your phone might void your waranty. Good luck

is that the only rom you have flashed? and was it nand, or sd etc...??
make sure because it could be a simple error in software as well..
something you can try and report back before opening up the phone

b12rtc said:
Check this: forum.xda-developers.com/showthread.php?t=834199 and this: forum.xda-developers.com/showthread.php?t=1190180, but be aware that opening your phone might void your waranty. Good luck
Click to expand...
Click to collapse
thanks. will take a look at those.
tecle2595 said:
is that the only rom you have flashed? and was it nand, or sd etc...??
make sure because it could be a simple error in software as well..
something you can try and report back before opening up the phone
Click to expand...
Click to collapse
I first got the problem while it was still stock. then i flashed miuiandroid.com's rom with MAGLDR and still. then i went to tytungs ICS Beta4 roms and still. now im back to the miuiandroid rom. so it doesnt seem to be a rom issue.

also all the roms were nand

gotenksnath said:
Just found out this morning that it can find my access point, but only if i literally lay it on top of my router. if i go more than maybe a foot away from it then nothing.
Click to expand...
Click to collapse
Hi my Friend,
your black Wifi Coaxial-Cable inside your HD2 is unpluged and not correct Connected. I had this three times at three different EU-HD2 Devices, too ( the Distance for a working WIFI Signal was 1 Feet. Normal, without Antenna ;-)). Regular the Connector at the PCM at the upper Corner fall of...
If you Still have Warrenty you have to bring this Phone to a Service. If not, you have to fix this little Problem by yourself ( you need 2 Minutes to do that ). Be Carefully when you Bring the whole HD2 inside your Backcover. You have to Tape the Vol-Rocker with a little Sticky-Tape. So this Plastic can´t fall off during the reassembling and is not to Deep to kill the Vol. Buttons...
The Opening is easy. You need only a Guitar-Plectron and t Torx-Screwdriver. Here you find Pictures:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm
Here a Picture from you Sick-Zone:
http://mperlitsch.hintergrundbild.com/htc_hd2/hd2_23.jpg
Where the RED ARROW is, you see One Wifi-Connector and i bet a Sex-Pack good German Beer, this one is your Problem. Put this Connector Back and everything works fine...
Best Regards,
Micha
P.S. Sorry for my poor english !

Perlitschke said:
Hi my Friend,
your black Wifi Coaxial-Cable inside your HD2 is unpluged and not correct Connected. I had this three times at three different EU-HD2 Devices, too ( the Distance for a working WIFI Signal was 1 Feet. Normal, without Antenna ;-)). Regular the Connector at the PCM at the upper Corner fall of...
If you Still have Warrenty you have to bring this Phone to a Service. If not, you have to fix this little Problem by yourself ( you need 2 Minutes to do that ). Be Carefully when you Bring the whole HD2 inside your Backcover. You have to Tape the Vol-Rocker with a little Sticky-Tape. So this Plastic can´t fall off during the reassembling and is not to Deep to kill the Vol. Buttons...
The Opening is easy. You need only a Guitar-Plectron and t Torx-Screwdriver. Here you find Pictures:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm
Here a Picture from you Sick-Zone:
http://mperlitsch.hintergrundbild.com/htc_hd2/hd2_23.jpg
Where the RED ARROW is, you see One Wifi-Connector and i bet a Sex-Pack good German Beer, this one is your Problem. Put this Connector Back and everything works fine...
Best Regards,
Micha
P.S. Sorry for my poor english !
Click to expand...
Click to collapse
Thanks so much to you and everyone who helped me out. Im going to see how much longer my warranty is because the only reason i would really send it back is if the touch screen fails AGAIN (happened twice already) but that wont happen for at least a year. So if warranty is gonna expire before then ill fix myself. again thank you to everyone.

problem with optimus 7 device. would appreciate the help

Hey,
So here`s my problem.
2 days ago my phone just switched off, no warning, no nothing, and won`t switch on ever since.
I already looked around for people that may have the same problem, but every thread talks about the device that won`t go pass the logo screen. It is not my case. My phone doesen`t even show the logo screen, nothing. You can press the power button for as long as you want, it just won`t start. At occasions, it starts up by itself, only for a minute or two and then turns off again.
At first i thought it may be a software problem, so I`ve cold started it and reset it but it didn`t make any difference.
After, I`ve thought... maybe a battery issue, so I`ve talked with a pal that has the same device, switched batteries. Apparently his phone started with my battery just fine, but mine didn`t work with his either.
Does anyone have a clue about what`s happening?.. If yes, please do share. As much as I like having a phone with a mind of it`s own.. it`s just not dependable XD
Thanks

Probably just broken / defective - if under warranty go and ask for repair or replacement (money back probably). If not under warranty sell as broken or throw to the bin - not to worth repair in my opinion.

I spend the same thing to my myself, LG stinks.
Sent from my HTC ONE V using xda app-developers app

Thanks for answering.
Yes, it was a problem with the motherboard.. got it fixed on warranty. Now I barely use the phone, of fear that it will break againXD. Looking forward to selling it while it`s still functional.

exousus said:
Thanks for answering.
Yes, it was a problem with the motherboard.. got it fixed on warranty. Now I barely use the phone, of fear that it will break againXD. Looking forward to selling it while it`s still functional.
Click to expand...
Click to collapse
I've got mine just back from repair (second time). It use to randomly reboot, now I hope it got repaired ("faulty electronic components have been replaced" - but I don't know what exactly). What I realize is MAC address change. But as they changed firmware from 1.1.8.10 to 1.0.16.10, I wonder if that's why it has new MAC? Does new MAC address means that some component was replaced ? IMEI does not change.