Tip regarding unlocking phone - Huawei Ideos X5 U8800

If you bought an unlock code online and are having troubles with it (phone always asks for unlock code on each reboot) the solution is simple: you have to install a stock ROM first, enter the unlock code and then you can use your custom ROM, it never asks for it again.
Learned this the hard way

Related

How to sim unlock?

Hello,
I try to sim unlock a Wizard G4 of my friend. I already flashed the touch HD rom on it and it works, but I can't unlock the device. I already have the correct unlock code, but it loops or something. First i need to enter my pin, then i get the unlock stuff, then I put in unlock code, but then it goes back to pin again, and again. I am confused , can anyone help?
Use 'lokiwiz03a' tool again to generate a new SIM unlock code and than try again,hope it works this time
I already fixed it . The code was totally correct, but I tried to unlock it on a custom wm 6.1 rom isntead of the original rom of the telephone, so it didn't work. I downloaded the original latest rom of the phone and then put in the unlock code and voila, unlocked!

Please help! Problems SIM unlocking g4 wizard

I've tried all the methods in this forum but I can't unlock it, I ran Lockwiz 0.3 and it gave my a number, but when I turn on the phone it doesn't ask me for a unlock code, I've tried with two sims, one with PIN and the other without, when I put the one that has PIN code it ask me to enter it but when I do it tells me that it's a invalid sim and the screen stays at the pin code entering proccess, of course when I put cancel the phone says is "searching" all the time. When I put the other sim it doesn't ask for the unlock code either and also stays at searching all the time.
I've put the sims on other phones so I know that they're not the problem.
I had my g4 hard SPL with X2H'S WM6.5 (with Manila2D) - {Build 23001} rom, but now I removed the hard SPL so to see if this fixed the problem but it didn't...
I would be really grateful if someone could help me, I've read lots of threads but haven't found a similar problem.

[Q] WM6.1 Simlock Brute force

Hello
I recently bought myself Samsung SCH-I770 phone which has Windows Mobile 6.1 operation system.
My problem is that it's network/sim locked. I cannot use it with my country SIM card.
Though, there's code entering option under "Phone->Settings->Security-SIM Lock". 6 digit code and it gives the answer "Lock code and Input code do not match." after I enter the WRONG code. I think it checks the code which is written somewhere on the memory of phone.
Now - my question is. Would it be possible to BRUTE FORCE the password using that option? 6 digit code (numbers) is only 1 million possibilities - shouldn't take THAT long for a program to process.
Thank you in advance,
sitapea1337
PS: I have checked unlock softwares which are posted on this forum, but non seemed to be working.
bumpbumpbump
Most phones lock permanently after 10-30 failed attempts to unlock. Some don't, so if you have good typing skills and memory, trying all combinations will only take you a "little while".
So critical. I think follow instructions of 'stepw'
Isn't there a risk that somebody might "try" to unlock the phone and it will be locked forever? How could one unlock the phone from being locked forever?
Like PUK code for SIM card, when SIM is locked by trying to enter PIN codes too many.

[Q] SIM Unlocking COde Not Acceprt

Hi all,
Here i Have Problem With My Viva (opal 100), Its Having Locked With Idea Carrier , I Get Also Lock code For Same But enter Window Not Accept Any Digit Ther while I Put Another card & try To Put Locked Code, Its Shown error( You Have Tryed Already 5 Times Wait For Retry,) But Not Any Proces Go Ahead please Help Me How Can I Unlocked This Phone, its Urgently.
You Have Tryed Already 5 Times Wait For Retr

Help!! Network unlock unsuccessful

Today I got the code to unlock my phone for all companies, I have the PIN unlock code, NCK and MCK, the problem happens when I enter the PIN code and tells me "Network unlock unsuccessful", I am 100% sure that the PIN is correct, then I can't do more, help please. Could unlock it with the soft method in the forum, but if I have the unlock code, I guess it's better in the normal way. I'm Epsylon 12feb CM7.2.
Bleak3993 said:
Today I got the code to unlock my phone for all companies, I have the PIN unlock code, NCK and MCK, the problem happens when I enter the PIN code and tells me "Network unlock unsuccessful", I am 100% sure that the PIN is correct, then I can't do more, help please. Could unlock it with the soft method in the forum, but if I have the unlock code, I guess it's better in the normal way. I'm Epsylon 12feb CM7.2.
Click to expand...
Click to collapse
Try to do it on stock rom...
If u do it with the softunlock it will fail!
Sent from my MB525 using xda premium
Soft unlock works, I've using this method for 4 month with CM7, but with some roms this method doesn't work. I'll try it on stock rom later.
I think he means entering the code when you are on stock rom. Don't know if it's gonna help. You could try.
First, insert your SIM-card into another (already unlocked) phone, and turn PIN-security off.
Then insert SIM back into your Defy, and try enter Network unlock code.
TorAll said:
First, insert your SIM-card into another (already unlocked) phone, and turn PIN-security off.
Then insert SIM back into your Defy, and try enter Network unlock code.
Click to expand...
Click to collapse
The SIM-card, is without PIN, i don't know why is asking me for a code, I'm using soft unlock with CM7 right now, and i have no problems with my simcard, i'll try it later with stock rom, it should work.
I'm now in stock ROM, CEE deblur, and still not working, still asking me for "SIM network unlock PIN", i put in the PIN code and "network unlock request unsuccessful". I'll try if the soft unlock works on White Rabbit.
Bleak3993 said:
I'm now in stock ROM, CEE deblur, and still not working, still asking me for "SIM network unlock PIN", i put in the PIN code and "network unlock request unsuccessful". I'll try if the soft unlock works on White Rabbit.
Click to expand...
Click to collapse
Im having the same problem, a friend told me to go back to the stock recovery, maby this will fix the problem... Have you tried it?

Categories

Resources