Related
I installed the Wildpuzzle v8 ... and then i installed SetCPU from this forum ... and i am not able to set the max past 528mhz ... i thought it must be something wrong with the custom rom .. ive even tried cynogenmod bt no luck there either ...
I believe its something to do with installing a custom kernel ... but i have no clue how to work with that ... If any one can please help me with that ... I am new to the android world ... and i want to overclock my wildfire ...
Thanks in advance ... tc
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
3xeno said:
If you are using WildPuzzle, flash the overclockable kernel. (The file name starts with 0130 under kernels).
Once you flash it, OC'ing is enabled, and you will be able to OC till 768 Mhz.
Flashing a kernel is the same as flashing a Custom ROM. Reboot into Recovery > Install Zip from SDC, Select the Kernel ZIP. Remember to take a nandroid backup beforehand though.
Good Luck
Click to expand...
Click to collapse
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
nlovers2000 said:
Install the Jacob's kernal.
Just flash it like ROM thru the recovery without flashing. I recommend a nandroid backup first in case something goes wrong.
Dont forget to hit the thanks button if it was helpful to you.
Click to expand...
Click to collapse
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
Don't flash that package, it's just a speed setting. First, you need to flash this
http://rom.tat.tw/wildfire/wildpuzzlerom/2.2/patches/0130_kernel_overclock_jacob_2.6.32_v1.zip
(3rd kernel of KERNELS title in Wildpuzzle 0.8 post)
xyzisahero said:
COnfusion ... wat do u mean by .... Just "flash" it like ROM thru the recovery "without flashing"
Click to expand...
Click to collapse
Flash it over the ROM, without wiping or reflashing the rom. Just flash it without doing nothing before or afterm and reboot.
xyzisahero said:
Thanks for the reply ... one more help if u can ... can u give me a link to the kernel ... actually the one i was thinking about was 0159_691mhz_cpu_speed_v1 ... will it do the job ??
Click to expand...
Click to collapse
This one:
0130_kernel_overclock_jacob_2.6.32_v1.zip
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Flashing a faster predefined speed than the default 528mhz, I prefer 652mhz file, helps with the booting process complete smoother.. less waiting time to load up desktop. That's what I find anyway... used to wait ages until setcpu kicks in.
Sent from my HTC Wildfire using XDA App
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
strongly reccomend HCDR Jacobs Kernel v4.1 its the bees knees haha
flash taht and your good to go
high - 691200
low - 25800
ephbee said:
if you use the 130 kernel with wildpuzzle, the wifi hotspot won't work, it will be visible but won't connect, if you flash 055 overclocking kernel from wildpuzzle 8.0.11 thread then wifi hotspot is all good
Click to expand...
Click to collapse
Oh !! nw ive already flashd the 130 kernel ... what steps shd i follow to flash HCDR Jacobs Kernel v4.1 ... or the 055 kernel
3xeno said:
0159 will also do (You will STILL need to flash 0130 before that). It will preset the CPU Speed to 691. Personally, I prefer flashing the OC'ed kernel, and, setting my own speeds and profiles through SetCPU. But, it is upto you.
Click to expand...
Click to collapse
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
xyzisahero said:
One more thing .. as i was told flashing the 0130 kernel would help me in setting up a predifine values through setCPU... after flashing the 0130 .. i still cudnt set my speed more than 528 ... then i flashd the predifnd 691mhz kernel ... nw atleast the setcpu widget shows my max 691 nd min 254 .... :/
Click to expand...
Click to collapse
130 works fine, and if anything got a slightly higher linpack score than 055 as i tested both, it just wouldn't work with wifi hotspot.
i have only ever used set cpu.
to flash 055 i restored nandroid backup i did before overclocking with 130 and then flashed 055.
Flashing CM7 nightly #19 would resolve issues. Also i didn't heard anyone complaining about this on CM7 thread. Please be sure to follow exactly the steps for installing CM7 including wipe and format /system.
CM7 #19 is OC'able by defaul, u only have to install SETcpu.
#19 is pretty stable.
Hi folks,
Seems I'm having some troubles running and finding a good mod for my Apollo 5801.
I use Kyrillos 7, but seems my phone is hanging all the time when it reboots.
Could you please tell me
- what ROM do you use
- what version?
- what are the pro?
- what are the con? (what functions do NOT work?)
- how is speed?
- how is memory management?
Sorry to waste one reply...but this is not related to development, and should be asked in the general question....
dharamg3 said:
Sorry to waste one reply...but this is not related to development, and should be asked in the general question....
Click to expand...
Click to collapse
hi
yes u are right this is moved to general
whats best for u is not the best for all u need to try the rom and keep what the best & most confy for u
and iv said this dont remember how many times
haree said:
hi
yes u are right this is moved to general
whats best for u is not the best for all u need to try the rom and keep what the best & most confy for u
and iv said this dont remember how many times
Click to expand...
Click to collapse
thx.
ok, but it would be nice to see what mod is most succesfull, right?
kyrillos is good for me so far~
Im using stock jpd overclocked to 1400mhz with g3mod extreme and rooted. Its very quick
sent from rooted samsung gt-i5800 froyo
Kyrillos is most popular. I'm usiong v7.0. Try flashing a different kernel such as G3Mod Ultimate v1.5.
Your phone may not like the fugumod kernel for some reason so flash G3 mod since its one of the most popular and your phone should run smoother.
Im using Kyrillos rom v7 with G3 Mod 1.5.1 Ultimate kernel. It working like a charm, smooth like womans legs and fast like a rocket.
Sent from my superfast Galaxy 3
I' m using kyrillos' s rom 7.0 with g3mod Ultimate 1.5.1 kernel and supercharger v6 script.
i haven' t lag and the phone is ultra fluid
Where can i get the supercharger script plz
sent from rooted samsung gt-i5800 froyo
i'm using Grigora V1.0 (build 0.5) releasing today
i dont know much about setcpu.. but I want to flash g3mod 1.5.2 kernel. i have 2 queries.
1. Which g3mod1.5.2 i shud go for?? extreme/ultimate/battery performance. etc..
2. is it essential to do setcpu after flashing kernel? cant i use normally just after flashing?
bizjoya said:
i dont know much about setcpu.. but I want to flash g3mod 1.5.2 kernel. i have 2 queries.
1. Which g3mod1.5.2 i shud go for?? extreme/ultimate/battery performance. etc..
2. is it essential to do setcpu after flashing kernel? cant i use normally just after flashing?
Click to expand...
Click to collapse
none go for 1.5.1 or 1.5.0 for the moments 1.5.2 has decreased voltage which gives freezes
thanks a lot. should I factory reset before I flash?
bizjoya said:
thanks a lot. should I factory reset before I flash?
Click to expand...
Click to collapse
nope its not necessary
i use self moded jps base
So how do I install the Kyrillos with 3Gmod?
I tried changing the zImage in the Flash_this_as_one-package.tar
But my phone would not want to pick it up with Odin.
I'm thinking of installing the Destiny now...?
Any comments?
Godyn said:
Hi folks,
Seems I'm having some troubles running and finding a good mod for my Apollo 5801.
I use Kyrillos 7, but seems my phone is hanging all the time when it reboots.
Could you please tell me
- what ROM do you use
- what version?
- what are the pro?
- what are the con? (what functions do NOT work?)
- how is speed?
- how is memory management?
Click to expand...
Click to collapse
1. Kyrillos ROM
2. v.7.0 NON_OC
5. Very fast.
6. Good
Kyrillos ROM + G3MOD Kernel.
Godyn said:
So how do I install the Kyrillos with 3Gmod?
I tried changing the zImage in the Flash_this_as_one-package.tar
But my phone would not want to pick it up with Odin.
I'm thinking of installing the Destiny now...?
Any comments?
Click to expand...
Click to collapse
First, flash Kyrillos ROM, then do a partition with CWM (if You want), then flash a kernel.
KSLevel11 said:
1. Kyrillos ROM
2. v.7.0 NON_OC
5. Very fast.
6. Good
Kyrillos ROM + G3MOD Kernel.
First, flash Kyrillos ROM, then do a partition with CWM (if You want), then flash a kernel.
Click to expand...
Click to collapse
Thx that last is not understood
- I have K7 NOC
- I have ext4 made on my SD via pc software
- how to flash kernel? the download is only a ZImage? How can I import this? (that's why i tried in the K7 zip package
so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???
Shadowmaniac said:
so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???
Click to expand...
Click to collapse
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...
umangsagar said:
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...
Click to expand...
Click to collapse
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die
Shadowmaniac said:
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die
Click to expand...
Click to collapse
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more
umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more
Click to expand...
Click to collapse
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update
maybe u can try set it on performance that always helps a bit for me but i dont know
Shadowmaniac said:
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update
Click to expand...
Click to collapse
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.
umangsagar said:
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.
Click to expand...
Click to collapse
ok i will see then
umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
Click to expand...
Click to collapse
thx for this help !
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC)
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?)
- I have ext4 with many installs, won't it be damaged after updating?
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...)
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
I suggest using fugumod ultra as that has an OCed bus so games wont lagg.
Sent from my GT-I5800 using XDA App
Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse
umangsagar said:
Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
umangsagar said:
Godyn said:
thx mate
I've tried it
it doesn't make my phone faster, from 396 to 409 in the benchmark.
Probably it's the SD card?
Click to expand...
Click to collapse
Dont worry about the quadrant score, its misleading.
You can get a higher quadrant score by some tweaks, but more importantly.
See if your phone is more responsive, much faster, no lags, no freezes. If it is there, quadrant doesnt matter.
Click to expand...
Click to collapse
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse
Godyn said:
umangsagar said:
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse
Brother, it does not ask for wiping, you have to do it manually...Also Supercharger doesnt work for me however lagfix does, but again I would say more than quadrant score, you should be concerned about the performance of the phone and responsiveness.
Click to expand...
Click to collapse
guys is it okay to install this rom directly from stock samsung android 2.1?
i haven't installed anything on my cell phone, its not rooted etc aswell. Just got it and wanna install kyrillos immidietely
should i just follow the guide given in kyrillos thread?
Also i've downloaded the OC version but i currently have no intention of actually overclocking. Can i use that rom and keep the stock CPU speed? cuz in the future i might OC
Thugnificent1 said:
guys is it okay to install this rom directly from stock samsung android 2.1?
i haven't installed anything on my cell phone, its not rooted etc aswell. Just got it and wanna install kyrillos immidietely
should i just follow the guide given in kyrillos thread?
Also i've downloaded the OC version but i currently have no intention of actually overclocking. Can i use that rom and keep the stock CPU speed? cuz in the future i might OC
Click to expand...
Click to collapse
hi
1. read carefully on how to use Odin
2. it is always advisable to do a factory/Data wipe and wipe delvi cache and then flash the ROM via odin and if u want to go back to the stock rom dont worry just look in the rollup thread and u will see some links with stock rom with out boot loader for u to flash
good luck and be care full read carefully before attempting to flash
Like it has been said before, it´s ok.
Just remember to follow the guide and you´ll be just fine.
I recommend to flash the Kyrillos Rom 9.2 with G3Mod 2.2.2 noc oc.
Hit thanks if it helped you anyway.
Best of luck
Thanks alot harree.
Also what about the Overclock thingy? and one more question i read in one of the threads that a bettery stats wipe should be done after installing the rom. Well i searched around and i couldn't find a thread on how to do that. I would appreciate if someone can help with that.
@iam_dragonmaster, how can i install the g3mod 2.2.2 non oc (i figure this is a kernal? how can i install a kernal when installing the rom?) with kyrillos rom? besides i can only install kyrillos 9.0 i think then have to use the update.zip thingy to update.
Thugnificent1 said:
Thanks alot harree.
Also what about the Overclock thingy? and one more question i read in one of the threads that a bettery stats wipe should be done after installing the rom. Well i searched around and i couldn't find a thread on how to do that. I would appreciate if someone can help with that.
@iam_dragonmaster, how can i install the g3mod 2.2.2 non oc (i figure this is a kernal? how can i install a kernal when installing the rom?) with kyrillos rom? besides i can only install kyrillos 9.0 i think then have to use the update.zip thingy to update.
Click to expand...
Click to collapse
Boot into recovery using the extended boot menu and apply the update for kyrillos 9.2 by selecting zip from SD card and of course you need to put the update in your SD card. You can download g3mod kernel and flash it via Odin one package and it does not wipe your data . Also you can download the battery calibration app from the market and install it and follow the instructions. For me i use Zeppelinroxs die hard battery calibrator script. Can be found with the beta/test releases of v6 supercharger.
Sent from my GT-i5801 using XDA App
Thanks alot bscraze
btw this is annoying :S
To prevent spam to the forums, new users must wait five minutes between posts. All new user accounts will be verified by moderators before this restriction is removed.
Click to expand...
Click to collapse
I am not a bot mods remove this restriction please :3
Thugnificent1 said:
Thanks alot bscraze
btw this is annoying :S
I am not a bot mods remove this restriction please :3
Click to expand...
Click to collapse
Haha no problem
Sent from my GT-i5801 using XDA App
Thugnificent1 said:
Thanks alot bscraze
btw this is annoying :S
I am not a bot mods remove this restriction please :3
Click to expand...
Click to collapse
Dont worry.. this is normal filter for anti spamming.. most of us have to wait the lowest being 20 seconds i think...
Although, I could infract you for posting the same thing at different places!
Thread Closed!
Hi I recently downloaded kyararom 5.0 Oc version.I actually do not like to mess up with the cpu settings.The thing I wanted to know is that if I flash it with g3mod 2.2 non-oc over it would it function as an non-oc rom or I have to download the non-oc version of kyararom 5.0 and one more question is it necessary to partion my sd card if I install this rom.
Any help on this would be highly appreciated .
Thanks in advance
rdass3646 said:
Hi I recently downloaded kyararom 5.0 Oc version.I actually do not like to mess up with the cpu settings.The thing I wanted to know is that if I flash it with g3mod 2.2 non-oc over it would it function as an non-oc rom or I have to download the non-oc version of kyararom 5.0 and one more question is it necessary to partion my sd card if I install this rom.
Any help on this would be highly appreciated .
Thanks in advance
Click to expand...
Click to collapse
There is nothing like OC-ROM.........
There is only a thing called OC-Kernel.....
The ROM is called OC version because it uses an OC-kernel.....if you use a non-OC kernel on that then it'll be a non-OC ROM dats it....
Flash any kernel if you want...there is no problem....
Hope You are clear Now...
rdass3646 said:
Hi I recently downloaded kyararom 5.0 Oc version.I actually do not like to mess up with the cpu settings.The thing I wanted to know is that if I flash it with g3mod 2.2 non-oc over it would it function as an non-oc rom or I have to download the non-oc version of kyararom 5.0 and one more question is it necessary to partion my sd card if I install this rom.
Any help on this would be highly appreciated .
Thanks in advance
Click to expand...
Click to collapse
you can flash non-oc kernel over Kyorarom and it will be non-oc...partitioning sdcard is optional..if you don't you'll have around 95mb internal free...if you do you'll have around 152mb free on internal...
btw: you could ask in Kyorarom threads....and not opening a new thread
EDIT: Kyorarom threads:
General:
http://forum.xda-developers.com/showthread.php?t=1322607
Development:
http://forum.xda-developers.com/showthread.php?t=1230801
Sent from Galaxy
Kyorarom Ascendency
powered by
G3mod 2.2.2 OC
rkkoby said:
you can flash non-oc kernel over Kyorarom and it will be non-oc...partitioning sdcard is optional..if you don't you'll have around 95mb internal free...if you do you'll have around 152mb free on internal...
btw: you could ask in Kyorarom threads....and not opening a new thread
EDIT: Kyorarom threads:
General:
http://forum.xda-developers.com/showthread.php?t=1322607
Development:
http://forum.xda-developers.com/showthread.php?t=1230801
Sent from Galaxy
Kyorarom Ascendency
powered by
G3mod 2.2.2 OC
Click to expand...
Click to collapse
Sorry mate I tried searching the official kyararom thread but did not find anything related to that oc and non oc thing thanx for the help though.
raja4sure said:
There is nothing like OC-ROM.........
There is only a thing called OC-Kernel.....
The ROM is called OC version because it uses an OC-kernel.....if you use a non-OC kernel on that then it'll be a non-OC ROM dats it....
Flash any kernel if you want...there is no problem....
Hope You are clear Now...
Click to expand...
Click to collapse
thanx so much buddy for the quick reply the information you provided was very helpful for me.thanx again