Hi folks,
Seems I'm having some troubles running and finding a good mod for my Apollo 5801.
I use Kyrillos 7, but seems my phone is hanging all the time when it reboots.
Could you please tell me
- what ROM do you use
- what version?
- what are the pro?
- what are the con? (what functions do NOT work?)
- how is speed?
- how is memory management?
Sorry to waste one reply...but this is not related to development, and should be asked in the general question....
dharamg3 said:
Sorry to waste one reply...but this is not related to development, and should be asked in the general question....
Click to expand...
Click to collapse
hi
yes u are right this is moved to general
whats best for u is not the best for all u need to try the rom and keep what the best & most confy for u
and iv said this dont remember how many times
haree said:
hi
yes u are right this is moved to general
whats best for u is not the best for all u need to try the rom and keep what the best & most confy for u
and iv said this dont remember how many times
Click to expand...
Click to collapse
thx.
ok, but it would be nice to see what mod is most succesfull, right?
kyrillos is good for me so far~
Im using stock jpd overclocked to 1400mhz with g3mod extreme and rooted. Its very quick
sent from rooted samsung gt-i5800 froyo
Kyrillos is most popular. I'm usiong v7.0. Try flashing a different kernel such as G3Mod Ultimate v1.5.
Your phone may not like the fugumod kernel for some reason so flash G3 mod since its one of the most popular and your phone should run smoother.
Im using Kyrillos rom v7 with G3 Mod 1.5.1 Ultimate kernel. It working like a charm, smooth like womans legs and fast like a rocket.
Sent from my superfast Galaxy 3
I' m using kyrillos' s rom 7.0 with g3mod Ultimate 1.5.1 kernel and supercharger v6 script.
i haven' t lag and the phone is ultra fluid
Where can i get the supercharger script plz
sent from rooted samsung gt-i5800 froyo
i'm using Grigora V1.0 (build 0.5) releasing today
i dont know much about setcpu.. but I want to flash g3mod 1.5.2 kernel. i have 2 queries.
1. Which g3mod1.5.2 i shud go for?? extreme/ultimate/battery performance. etc..
2. is it essential to do setcpu after flashing kernel? cant i use normally just after flashing?
bizjoya said:
i dont know much about setcpu.. but I want to flash g3mod 1.5.2 kernel. i have 2 queries.
1. Which g3mod1.5.2 i shud go for?? extreme/ultimate/battery performance. etc..
2. is it essential to do setcpu after flashing kernel? cant i use normally just after flashing?
Click to expand...
Click to collapse
none go for 1.5.1 or 1.5.0 for the moments 1.5.2 has decreased voltage which gives freezes
thanks a lot. should I factory reset before I flash?
bizjoya said:
thanks a lot. should I factory reset before I flash?
Click to expand...
Click to collapse
nope its not necessary
i use self moded jps base
So how do I install the Kyrillos with 3Gmod?
I tried changing the zImage in the Flash_this_as_one-package.tar
But my phone would not want to pick it up with Odin.
I'm thinking of installing the Destiny now...?
Any comments?
Godyn said:
Hi folks,
Seems I'm having some troubles running and finding a good mod for my Apollo 5801.
I use Kyrillos 7, but seems my phone is hanging all the time when it reboots.
Could you please tell me
- what ROM do you use
- what version?
- what are the pro?
- what are the con? (what functions do NOT work?)
- how is speed?
- how is memory management?
Click to expand...
Click to collapse
1. Kyrillos ROM
2. v.7.0 NON_OC
5. Very fast.
6. Good
Kyrillos ROM + G3MOD Kernel.
Godyn said:
So how do I install the Kyrillos with 3Gmod?
I tried changing the zImage in the Flash_this_as_one-package.tar
But my phone would not want to pick it up with Odin.
I'm thinking of installing the Destiny now...?
Any comments?
Click to expand...
Click to collapse
First, flash Kyrillos ROM, then do a partition with CWM (if You want), then flash a kernel.
KSLevel11 said:
1. Kyrillos ROM
2. v.7.0 NON_OC
5. Very fast.
6. Good
Kyrillos ROM + G3MOD Kernel.
First, flash Kyrillos ROM, then do a partition with CWM (if You want), then flash a kernel.
Click to expand...
Click to collapse
Thx that last is not understood
- I have K7 NOC
- I have ext4 made on my SD via pc software
- how to flash kernel? the download is only a ZImage? How can I import this? (that's why i tried in the K7 zip package
Related
Hi, please, can you say me, what are biggest diferences between this 2 roms? Thank you for your questions
well i prefere indroid becouse of the theme changer and font changer. i don't think kyrillos has these for the rest there are not much diffrences i think
Thank you for your answer. Please, can you write me, which are apllications in Kyrillos' rom 5.4 ? Do you know how to delete aplications included in rom? In InDroid, there are some apps which are not good for me and I want to remove them
maybe u can use the thanks buttonyes, u can with root explorer. go to system/app and delete the apps u don't like i deleted like 7 apps in indroid if u wanna know stock apps, read kyrillos thread u can try both if u like. http://jaxov.com/2010/09/how-to-remove-stock-default-android-apps-easily/
kozusnik said:
Thank you for your answer. Please, can you write me, which are apllications in Kyrillos' rom 5.4 ? Do you know how to delete aplications included in rom? In InDroid, there are some apps which are not good for me and I want to remove them
Click to expand...
Click to collapse
u can do that easily with titanium backup too
Kyrillos v5.6 work great for me
I use Kyrillos' ROM along with the Fugumod 2.2 Bleeding Edge kernel. Overclocked to 1.3GHz. Works great for me
I'm yet to check out Indroid. I just don't see it getting updated as frequently as Kyrillos' ROM. Once that happens, maybe I'll give it a shot.
Pwng3 said:
I use Kyrillos' ROM along with the Fugumod 2.2 Bleeding Edge kernel. Overclocked to 1.3GHz. Works great for me
I'm yet to check out Indroid. I just don't see it getting updated as frequently as Kyrillos' ROM. Once that happens, maybe I'll give it a shot.
Click to expand...
Click to collapse
its got almost no bug. So frequent update is not required.
If any thing gets outdated i surely will update it
Pwng3 said:
I use Kyrillos' ROM along with the Fugumod 2.2 Bleeding Edge kernel. Overclocked to 1.3GHz. Works great for me
I'm yet to check out Indroid. I just don't see it getting updated as frequently as Kyrillos' ROM. Once that happens, maybe I'll give it a shot.
Click to expand...
Click to collapse
I m on indroid 4.3 with fugmod 2.4 beta3 kernel. Its not almost but i have no lags at all.
I use Kyrillos' v5.6 also tried Indroid v4.3, I like both of them.
I love indroids fsc and font/theme app it just makes life easier but it lagged alot for me so I'm using Kryillos's rom.
Sent from my GT-I5800 using XDA App
dilzo said:
I love indroids fsc and font/theme app it just makes life easier but it lagged alot for me so I'm using Kryillos's rom.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
no problem at all in 4.3 but i reccomend to use auto memory manager.
I am a G3 user but finding lots of problem after upgrading it to froyo last week, battery problem, camera crashing etc. i am a moderate user. can anyone suggest me a good CUSTOM ROM to flash. I am using it in india. bettery and gps my main priority. plz reply.
bizjoya said:
I am a G3 user but finding lots of problem after upgrading it to froyo last week, battery problem, camera crashing etc. i am a moderate user. can anyone suggest me a good CUSTOM ROM to flash. I am using it in india. bettery and gps my main priority. plz reply.
Click to expand...
Click to collapse
You can try indroid v5 which would be coming within few days...
Tapatalked from my super smooth, ultra fast samsung galaxy s2.
I'm having an excellent run on kyrillos rom v5.7..
Sent From My GT-I5800 Cruzin Along 0n Kyrillos' Rom V5.7 Honeycomb Edition..
thanx masters. Will look forward to Indroid 5. And asusual hearing so many good about Kyrillos 6. But what If I want to go for a Stock ROM??
Indroid is good!!
Waiting for V5.0.
Try Kyrillos' rom v6. I heard that its good.
How about XXJPM?? shud i go for that as until Indroid 5 comes out???
kyrillos13 said:
Try Kyrillos' rom v6. I heard that its good.
Click to expand...
Click to collapse
Master.. i already did that .. but somehow battery backup is a bit low.. found 5.7 most strongest from batt back point of view... any suggestion??
bizjoya said:
Master.. i already did that .. but somehow battery backup is a bit low.. found 5.7 most strongest from batt back point of view... any suggestion??
Click to expand...
Click to collapse
Then use 5.7 kernel with v6. And if u find v5.7 gud, use the same
I wud recommend flash 5.7 and then flash fugumod ultra pre release frm here: http://forum.xda-developers.com/showthread.php?t=1134369
vikraam said:
Then use 5.7 kernel with v6. And if u find v5.7 gud, use the same
I wud recommend flash 5.7 and then flash fugumod ultra pre release frm here: http://forum.xda-developers.com/showthread.php?t=1134369
Click to expand...
Click to collapse
thanks a lot vikram.. we need to flash it with ODIN as one package right??? tho GPS not working properly neither on v5.7 nor on v6.
bizjoya said:
thanks a lot vikram.. we need to flash it with ODIN as one package right??? tho GPS not working properly neither on v5.7 nor on v6.
Click to expand...
Click to collapse
use GPS Fix App
regardless what rom your in,it should work with this fix
HELLO GUYS.
BY READING THE SUBJECT U MUST HAVE FIGURED OUT I AM A DESPERATE NOOB
BUT SERIOUSLY CAN ANY ONE HELP ME TO INSTALL CWM ON GT-I5801. I AM ON STOCK FROYO 2.2 DDJP4(INDIA) ROOTED MANUALLY9(SUPER1CLICK). PLEASE HELP ME GUYS.. THANKING U ALL IN ADVANCE
i think g3mod kernel has cwm in it just flash g3mod kernel or contact the one who ported cwm to our phone
+1 for g3mod ..
Sent from my GT-I5800 using Tapatalk
Will try thanks
yes G3Mod 1.5.2, all versions have CWM...I personally would recommend 1.5.2 Ultimate Version.
umangsagar said:
yes G3Mod 1.5.2, all versions have CWM...I personally would recommend 1.5.2 Ultimate Version.
Click to expand...
Click to collapse
Well, don't recommend version 1.5.2 because it have a problem with uv and works only with some phones. Better install version 1.6.
Sent from my superfast Galaxy 3
g3mod kernel 1.6 should do the trick
cop1976 said:
Well, don't recommend version 1.5.2 because it have a problem with uv and works only with some phones. Better install version 1.6.
Sent from my superfast Galaxy 3
Click to expand...
Click to collapse
well When i replied to him, 1.6 was still in testing phase by dharamg3 so didnot write that, there wasnt much option then..but good news now is that 1.6 is released and the link is : http://forum.xda-developers.com/showthread.php?t=1129367
Enjoy mate.
umangsagar said:
well When i replied to him, 1.6 was still in testing phase by dharamg3 so didnot write that, there wasnt much option then..but good news now is that 1.6 is released and the link is : http://forum.xda-developers.com/showthread.php?t=1129367
Enjoy mate.
Click to expand...
Click to collapse
but what do u suggest umang.. 1.6 or 1.5? and if i flash it over ddjp4(india) stock kernels will it work?
werker123 said:
i think g3mod kernel has cwm in it just flash g3mod kernel or contact the one who ported cwm to our phone
Click to expand...
Click to collapse
ya g3mod kernel has cwm so flash g3mod kernel and get cwm
parth77 said:
ya g3mod kernel has cwm so flash g3mod kernel and get cwm
Click to expand...
Click to collapse
but will it work on stock ddjp4?
Jai-tulip said:
but will it work on stock ddjp4?
Click to expand...
Click to collapse
Will wrk for any froyo rom..
Sent from my GT-I5800 using Tapatalk
The G3Mod kernel has the CWM included. Stylooo's ROM is the latest to include CWM.
ranadip.bswas said:
Will wrk for any froyo rom..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
so is it better to (1)hard reset and flash kernel and hard reset again ? or
(2)flash kernel and then hard reset?
Jai-tulip said:
so is it better to (1)hard reset and flash kernel and hard reset again ? or
(2)flash kernel and then hard reset?
Click to expand...
Click to collapse
only flash kernel will do..
Sent from my GT-I5800 using Tapatalk
Jai-tulip said:
but what do u suggest umang.. 1.6 or 1.5? and if i flash it over ddjp4(india) stock kernels will it work?
Click to expand...
Click to collapse
Apologies for late reply, i was on tour.
definately G3Mod Ultimate 1.6 ( no 2nd thoughts for me )
I did use it over ddjp4 India and it is amazing (though I am now on Kyrillos 7.1 coz there hasnt been any ROM like that so far)
v1.6 is stable, no freezes yet for me in last two days since i installed, has CWM, My stats are there in my Signature....Normally I do a wipe before and after flashing Kernel
Share your experience of v1.6 with DharamG3 and thank him if you like it (thats the least we guys can do to motive them)
umangsagar said:
Apologies for late reply, i was on tour.
definately G3Mod Ultimate 1.6 ( no 2nd thoughts for me )
I did use it over ddjp4 India and it is amazing (though I am now on Kyrillos 7.1 coz there hasnt been any ROM like that so far)
v1.6 is stable, no freezes yet for me in last two days since i installed, has CWM, My stats are there in my Signature....Normally I do a wipe before and after flashing Kernel
Share your experience of v1.6 with DharamG3 and thank him if you like it (thats the least we guys can do to motive them)
Click to expand...
Click to collapse
yeah.thanks for uer help.. i flashed gmod1.6 performance.n i must say my phone is more silk.. any ways thanks again umang will trouble u for apps2sd v2.
Jai-tulip said:
yeah.thanks for uer help.. i flashed gmod1.6 performance.n i must say my phone is more silk.. any ways thanks again umang will trouble u for apps2sd v2.
Click to expand...
Click to collapse
The good thing about this forum is there is no trouble in helping any fellow G3 user
as for apps2SD.... check out G3Mod App ...it will help you with getting the best out of g3mod kernels..including app2sd, data2sd, file system convert....etc
umangsagar said:
The good thing about this forum is there is no trouble in helping any fellow G3 user
as for apps2SD.... check out G3Mod App ...it will help you with getting the best out of g3mod kernels..including app2sd, data2sd, file system convert....etc
Click to expand...
Click to collapse
yes umang i have g3mod apk installed. now there r 3 options: 1)convert file systems. 2)data2sd. 3)apps2sd. when i clik data2sd or apps2sd i get " make sure uer sd card is partioned properly". i have a 4gb sd card..so
Q)how to do partition? Q)cud u tell me values of partition? Q)shud i go for app2sd v2?
Q) why to convert file systems?
Jai-tulip said:
yes umang i have g3mod apk installed. now there r 3 options: 1)convert file systems. 2)data2sd. 3)apps2sd. when i clik data2sd or apps2sd i get " make sure uer sd card is partioned properly". i have a 4gb sd card..so
Q)how to do partition? Q)cud u tell me values of partition? Q)shud i go for app2sd v2?
Q) why to convert file systems?
Click to expand...
Click to collapse
go to recovery.. in advanced , u will find an option to partition ur sd..
PS : this wil format ur sd , so plz back up ur sd before perfoming partitioning..
Sent from my GT-I5800 using Tapatalk
guys is it okay to install this rom directly from stock samsung android 2.1?
i haven't installed anything on my cell phone, its not rooted etc aswell. Just got it and wanna install kyrillos immidietely
should i just follow the guide given in kyrillos thread?
Also i've downloaded the OC version but i currently have no intention of actually overclocking. Can i use that rom and keep the stock CPU speed? cuz in the future i might OC
Thugnificent1 said:
guys is it okay to install this rom directly from stock samsung android 2.1?
i haven't installed anything on my cell phone, its not rooted etc aswell. Just got it and wanna install kyrillos immidietely
should i just follow the guide given in kyrillos thread?
Also i've downloaded the OC version but i currently have no intention of actually overclocking. Can i use that rom and keep the stock CPU speed? cuz in the future i might OC
Click to expand...
Click to collapse
hi
1. read carefully on how to use Odin
2. it is always advisable to do a factory/Data wipe and wipe delvi cache and then flash the ROM via odin and if u want to go back to the stock rom dont worry just look in the rollup thread and u will see some links with stock rom with out boot loader for u to flash
good luck and be care full read carefully before attempting to flash
Like it has been said before, it´s ok.
Just remember to follow the guide and you´ll be just fine.
I recommend to flash the Kyrillos Rom 9.2 with G3Mod 2.2.2 noc oc.
Hit thanks if it helped you anyway.
Best of luck
Thanks alot harree.
Also what about the Overclock thingy? and one more question i read in one of the threads that a bettery stats wipe should be done after installing the rom. Well i searched around and i couldn't find a thread on how to do that. I would appreciate if someone can help with that.
@iam_dragonmaster, how can i install the g3mod 2.2.2 non oc (i figure this is a kernal? how can i install a kernal when installing the rom?) with kyrillos rom? besides i can only install kyrillos 9.0 i think then have to use the update.zip thingy to update.
Thugnificent1 said:
Thanks alot harree.
Also what about the Overclock thingy? and one more question i read in one of the threads that a bettery stats wipe should be done after installing the rom. Well i searched around and i couldn't find a thread on how to do that. I would appreciate if someone can help with that.
@iam_dragonmaster, how can i install the g3mod 2.2.2 non oc (i figure this is a kernal? how can i install a kernal when installing the rom?) with kyrillos rom? besides i can only install kyrillos 9.0 i think then have to use the update.zip thingy to update.
Click to expand...
Click to collapse
Boot into recovery using the extended boot menu and apply the update for kyrillos 9.2 by selecting zip from SD card and of course you need to put the update in your SD card. You can download g3mod kernel and flash it via Odin one package and it does not wipe your data . Also you can download the battery calibration app from the market and install it and follow the instructions. For me i use Zeppelinroxs die hard battery calibrator script. Can be found with the beta/test releases of v6 supercharger.
Sent from my GT-i5801 using XDA App
Thanks alot bscraze
btw this is annoying :S
To prevent spam to the forums, new users must wait five minutes between posts. All new user accounts will be verified by moderators before this restriction is removed.
Click to expand...
Click to collapse
I am not a bot mods remove this restriction please :3
Thugnificent1 said:
Thanks alot bscraze
btw this is annoying :S
I am not a bot mods remove this restriction please :3
Click to expand...
Click to collapse
Haha no problem
Sent from my GT-i5801 using XDA App
Thugnificent1 said:
Thanks alot bscraze
btw this is annoying :S
I am not a bot mods remove this restriction please :3
Click to expand...
Click to collapse
Dont worry.. this is normal filter for anti spamming.. most of us have to wait the lowest being 20 seconds i think...
Although, I could infract you for posting the same thing at different places!
Thread Closed!
Hi to all, i need a little help with the installation of this kernel. I'm trying to install it in ussr v3 and v4 and always get bootloop. I read that is necessary to uninstall a2sd but i don't know if those ROMs have it (both have Repencis kernel) and i don't know how to uninstall it. I checked init.d folder and i dont see any files with "a2sd" and i dont have my sd-card partitioned or anythig so i dont know what to do, please help. Thanks in advance guys.
pd: Sorry for bad english.
I to had the same problem but i was able to install the kuro kernel but i was using ICS fusion v2.0 rom
unroot ur phone
do a data wipe/cache
before installing kuro kernell
After installing Kuro kernel u may root ur phone again.
And remember always to flash it via CWM & not the stock recovery
u can use the faqbly method to flash the kernel
http://forum.xda-developers.com/showthread.php?t=1552889
what? unroot? I don't know why did my kernel got a problem with root stuff. try this one. usr have bacem tweak inside it, you'd better remove it or change the value to -20mV before you install my kernel.
i install this kernel with Repencis v3.5 and i didnt get bootloop maybe the a2sd thing is the one thats get you a bootloop cause i use link2sd..because of that i didnt got any problem
btw this kernel is COOL really fast and battery saver
Hi noob question here
I flashed kuro kernel(love this kernel BTW)on samsumsung kies updated stockrom but IMEI number disappeared (IMEI blank)gone from phone has anyone else had this happen. Is there a simple fix to this or reason ?, or do I have to stick with xxla2 which is fine but I love the enhancements on the kies updated rom
I have flashed back stock xxla2 and IMEI number has returned so no damage done
I did'nt note down the kies update number my bad.
edit
service version : PDA:LK3 / PHONE:LK3 / CSC:LL1 (XEU)
Thanks
kernel 2.6.35.7
android version 2.3.6
Gingerbread xxla2
Kernel version
2.635.7
[email protected]#15
same problem
cannot installed this kernel on purekat rom.i get installed aborted.why?
You really need kuro? Try savie SGY kernel.. It optimizes batter life and it has 15governors!!
is savie better ? what is the difference ?
fgru said:
is savie better ? what is the difference ?
Click to expand...
Click to collapse
all features are on each kernel thread
the only way you will know what works best for you is to test it
fgru said:
is savie better ? what is the difference ?
Click to expand...
Click to collapse
Yup..Savie is better
Sent from my GT-S5360
shyamSGY said:
Yup..Savie is better
Sent from my GT-S5360
Click to expand...
Click to collapse
please refrain from saying one thing is better than something else as this is normally not true in the scientific sense or just personal opinion
your use can differ from someones else so what might work "best" for you may not work "best" for someone else
shyamSGY said:
Yup..Savie is better
Sent from my GT-S5360
Click to expand...
Click to collapse
"best" or "better" is personal choice.
Also Savie's kernel is banned.
(I know it was one of good kernels, but he could not upload sources.)
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.