I'm sure the question has been asked 10,000,000 times already, but neither the search function nor a general Google are returning a solution.
I love my 8125, really I do, all except for numeric entry, which I do just often enough to hate the horizontal number arrangement.
Someone somewhere has to have written a little hack to add a numbers mode. Does anybody here happen to know who and where?
I dont have a Wizard but let me guess..
The easier way is to use your on screen keypad input. Im not sure how you are using your phone, probably landscape, but if you were to use potrait mode, the on screen keypad is really good.
That really isn't very practical in my case. I need to use the hardware buttons. I bought a Wizard because it had a real keyboard, it just isn't very good for numbers.
Is this really something that cannot be done? I guess the TyTn does it right from the pictures, but my Wizard is like three weeks old, and I really am having a very hard time entering numbers here.
You can't enter numbers on the onscreen keypad if you can't see it. The assumption made by MobileSpeak Pocket is that if you have a lot of data entry to do that you will buy a Bluetooth keyboard. I bought my Wizard so I wouldn't need to carry one.
i been tryin to find this as well.. similar to the hermes numeric layout. i would like the fact that i can answer and end phone calls by using the sliding keyboard. but that not happening on our wizard yet.
anyway i kinda hav a partial solution to what you want which i hav implemented at the moment.
you need both software vito quick contact (latest) and pqzII wizard version. first use the code menu in pqzII to map ur alt + Y U I as 1 2 3 and H J K as 4 5 6 and so on. and alt+space as return.
now to dial normal numeric number jus open up vito quick contact hold ur alt button to toggle alt button and press those buttons above and press space twice to dial.
it may not be convenient but once u get the hang of it you can even dial with your eyes close literaly. well say like when you are driving you can dial it and use bluetooth headset or handsfree speaker. i know you all gonna say voice dial is better. but i dreaded voicedial and physical button never fails me.
just hopes some one will come out with the sliding answering method.
Okay, I am a little confused here (and maybe this is just PQII and maybe it's not..)
The keyboard has a shift and a dot. In addition to these, Mobile Speak Pocket remaps hardware buttons as Control, Alt, Shift, and Tab. I wonder if these are the same buttons that PQII uses. In the event that they are, PQII will do exactly what I want sinze Alt is sticky in MSP.
Ideally though, I want to basically change the layout of the symbols when you press the dot, and just use double-dot to put my phone into the appropriate mode.
uummm i uses caps/shift for my alt button in pqzII, i dun use control. maybe thats why it didnt work. u can try the windows key or the ok key if other software remaps your cap/shift and dot button.
remember this can only work in vito quick contact as the our normal dialer cant detect those other symbols button. basically after i play around with the wizard too much =P, i found out that it is in the double dot format when you are in dialer but pressing the symbols wont work other than the normal numbers and * and #. so thats why you need vito quick contact
Anyone know how to disable the hardware buttons for the incoming call screen?
I only want to answer/reject calls with the slider, not the hardware buttons as I sometimes touch them by accident while getting the phone out of my pocket.
I've tried PocketShield but didn't like it, although it was able to disable the hardware buttons. Any other suggestions?
Have you already tried s2u2? The slider can receive/reject incoming calls and you also have options to disable the hardware buttons. Works great on my elf.
I tried it some days ago, couldn't get it to work the way I wanted it to, mainly because I don't want to use the locking part. I always lock my device with the power button and I only wanted to have the ability to disable the hardware buttons for incoming calls.
After your message, I decided to install it again and give it another try. Changed some of the settings and I think I finally managed to get it working the way I want to!
It's a bit of a memory consuming app for just disabling the hardware buttons for incoming calls, but hey, it works
Thanks!
If anyone finds a solution without using S2U2, please let me know!
Ok, I have uninstalled S2U2 again. Even though it did do the job, it was also a memory consuming application just for disabling the answer/reject keys during incoming calls and I want to keep my device as clean as possible.
I have searched for hours trying to find a solution to this what I think is a very common problem. How many of you have accidentally accepted or rejected calls because of the hardware buttons? In my opinion, HTC should have thought about this and provide a solution for it.
Anyone with a better solution than S2U2?
Thanks for your input!
New version 1.40 of S2U2 uses MUCH less battery. I almost don't notice, it's running. Great program at least for me.
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
can you tell me how you have set your settings for just disabling the hardware buttons for incoming calls in s2u2 ? Thanks
I've used AE Button Plus to disable the 'Answer Call' an 'End Call' hardware keys as I had the same annoying problem of accidentally rejecting a call when taking the device out of my pocket. This works well for me and have now enabled the keys to turn wifi and bluetooth off and on with 3 taps.
Thanks everyone!
I wasn't aware of the latest S2U2 version and I almost gave it another try until I read Anfloyd's post.
I did look at AE Button Plus before, but didn't think it was capable of doing what I wanted: disable the hardware buttons during incoming calls, but still have them functional when there isn't an incoming call (such as showing the phone dial screen which it does by default).
When I looked at the AE Button Plus website, I noticed I couldn't configure the buttons based on the current active screen/program. So, even though I knew I could disable the hardware buttons, I thought I would then loose the whole functionality of them..and that would make the answer and reject buttons on my device useless.
BUT, after reading your message Anfloyd, it got me thinking..I don't need to configure it based on the current screen/program. I can just disable the buttons for 1 tap..and assign programs for them for 3 taps for example.
So, now I have this:
- 1 tap: do nothing. This way, both the answer and reject buttons are not working during incoming calls and I can only use the slider to accept/reject calls.
- 3 taps for answer button: start the phone application.
- 3 taps for reject button: nothing yet, but I'll find something
This is a solution I can work with! I have only tested it for a short time, so if it turns out that AE Button Plus is causing problems I'll give the latest S2U2 another try, but so far this seems to be working just fine.
Thanks again for your input!
ChrisVDD, those options can be found in the S2U2 settings. I don't have S2U2 installed anymore so I don't remember the exact settings. I just disabled all locking features that I didn't need, selected to disable the hardware buttons and chose to use the slider. Give it a try, you should be able to sort it out. If you can't, let me know and I'll install S2U2 again to see what settings you need.
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
PhaseIV said:
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
Click to expand...
Click to collapse
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Click to expand...
Click to collapse
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
GryphonLeon said:
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
Click to expand...
Click to collapse
Thank you for your fast reply, now It works like I wanted it to do.
Is it possible to end call using red hardware button but not to ignore it before answering? I tried AEBplus and it works like it should but that's not all I needed.
danum said:
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
Click to expand...
Click to collapse
The problem I have with s2u2 is that I cannot mute incoming calls... The voulme buttons are locked... the touch screen is locked and mute on face down also does not work....
Maybe A_C will allow us which buttons to lock in the next release...
I find that I really don't use the volume buttons much because I don't listen to much music. I'd love to re-map one of them to provide an alt-tab type of application-switching function. Does anyone know if this is possible? Yes, I know about long-pressing the home button to bring up the last 6 programs for quick switching, but I'd really like a hardware button so I don't have the delay of the long-press and extra tap for selecting. I want quick back and fourth between programs...
Is any chance to customize hardware keys for open phone application, and end call, because i don't love touch keys for start and end call.
maybe when its rooted as of now its not possible
Greets all,
I wanted to know if this could be done and if so would someone be willing. I use the Desire HD Sense rom, and I'm sure most iof not all roms are this way so thats why I posted it here and not specific to the rom I am using, but as we all know that when you are in a call there is only two buttons on the screen, Mute (Microphone) and Speaker (Speaker Icon), is there a way that we could at least get a thrid icon and have the Hold/UnHold button on that screen too? I would think that seems to be a important function that should be on the main screen and not have to push the Windows key to get to it. Obviously the Mute and speak can be accessed from both, but not the hold button.
Thanks for anyone who can help, and does anyone else feel the same way or am I the only shmuck?
Hows about a bump.
Cyanogenmod has an on-screen hold button, unfortunately you can't just use that phone.apk so you'll have to look at the source code and do some modifications yourself.