Hi, I'm using tmo hd2 and have been flashing Roms and getting my feet wet for a few months now, something happened between flashes that is preventing me from using wifi tether on all my favorite Roms, dorimanx, hyperdroid, ndt miui and more, I know I had it working before fine on hyperdroid and ndt miui but now doesn't want to work, same Roms same versions worked before, I tried reflashing maglrd and cwm partition, full wipe, reinstall. Ect but no luck, anybody else run into this or have any ideas where I should be looking? Thanks for your help, this is my first post but I appreciate this forum a lot and am very thankful for all the guides and. Tutorials here!
I would task 29 reformat my sd card and try again from scratch (saving my data first of course ).
It might be worth reflashing your radio of course, but ensure you flash a compatable radio or you can brick the phone
loveandelectrik said:
Hi, I'm using tmo hd2 and have been flashing Roms and getting my feet wet for a few months now, something happened between flashes that is preventing me from using wifi tether on all my favorite Roms, dorimanx, hyperdroid, ndt miui and more, I know I had it working before fine on hyperdroid and ndt miui but now doesn't want to work, same Roms same versions worked before, I tried reflashing maglrd and cwm partition, full wipe, reinstall. Ect but no luck, anybody else run into this or have any ideas where I should be looking? Thanks for your help, this is my first post but I appreciate this forum a lot and am very thankful for all the guides and. Tutorials here!
Click to expand...
Click to collapse
I had this problem once, go to "Fix for random malfunctioning of WiFi tethering ability."thread and see if that helps you out.
Related
Hello,
I recently had my HD2 setup with MAGLDR 1.11 and a stock DHD ROM, however this froze constantly and seemed to get worse over time, as well as all together failing to boot sometimes.
So I updated MAGLDR to 1.13 found a nice rom "Typhoon CM7" I believe, downloaded the radio it sugested and flashed it, downloaded CWM and flashed it, and then flashed the ROM from SD using CWM.
Sadly however this has not fixed my freezes/failures to boot, im starting to think it might be hardware related.
So what I am asking is does somebody have a ROM that is working really well for them that they could sugest to me?
Thanks,
Alex.
everyone has different opinions, do you want a version with or without sense?
personally i like sense so am using imilkas ram hd version ,its fast and very stable
Well i usually tend to go for ROMs without sense, but i am pretty impartial to it.
alexhope21 said:
Well i usually tend to go for ROMs without sense, but i am pretty impartial to it.
Click to expand...
Click to collapse
Which ROMs have you tried already, and what was wrong with them?
I have tried one of the many DHD stock ROMs and Typhoon CM7, as well as Raphroid and Ultradroid.
I frequently get a freeze at "GO GO GO" in MAGLDR 1.13, and then once the ROM does eventually succeed to boot, it often locks up.
Some ROMs seemed to do better then others overall however, Typhoon CM7, successfully booted most frequently.
In all cases I have used recommended radio's.
However the greatest hassle has been flashing them as I can only get CWM to boot 1 out of 20 times after multiple reflashings, it often gives me an error stating "FATALHIT 1".
Does everyone get behaviour like this?
Hmm.
That's Weird I Have Tried Lots of these roms and they all seem stable and fast on my hd2
crabtreebrandon29 said:
That's Weird I Have Tried Lots of these roms and they all seem stable and fast on my hd2
Click to expand...
Click to collapse
Could you please give me some specific information of what version of MAGLDR, CWM you were using, as well as a link to the Radio and ROM?
Im starting to think my hardware might be bunged.
Thanks,
Alex.
i am too having a lot of problems when booting up from maglrd. It freezes or gets hit fatal error. Do anyone know a good stable rom that doesn't freeze when booting up,and has great battery life?
thi713 said:
i am too having a lot of problems when booting up from maglrd. It freezes or gets hit fatal error. Do anyone know a good stable rom that doesn't freeze when booting up,and has great battery life?
Click to expand...
Click to collapse
All of them. End of story. This is due to user error. Not build related
alexhope21 said:
I have tried one of the many DHD stock ROMs and Typhoon CM7, as well as Raphroid and Ultradroid.
I frequently get a freeze at "GO GO GO" in MAGLDR 1.13, and then once the ROM does eventually succeed to boot, it often locks up.
Some ROMs seemed to do better then others overall however, Typhoon CM7, successfully booted most frequently.
In all cases I have used recommended radio's.
However the greatest hassle has been flashing them as I can only get CWM to boot 1 out of 20 times after multiple reflashings, it often gives me an error stating "FATALHIT 1".
Does everyone get behaviour like this?
Click to expand...
Click to collapse
i assume you are changing the CWR partition each time you change from a dhd rom to a non sense/GB rom ?
Richy99 said:
i assume you are changing the CWR partition each time you change from a dhd rom to a non sense/GB rom ?
Click to expand...
Click to collapse
Yeah, Im starting to think my hardware is damaged, I used to use the SD RAM rom that Dark Forces released, and I guess it did not benifit my device, as it would frequently get quite hot after 20min of straight use.
How does this ROM run with the 2.15.50.14 radio?
If it is also laggy and has bugs, then I think your phone might be broken.
For me all roms using SD-EXT are laggy as hell and i personally stopped testing those roms as I'm already used to the smoothness of Gingerbread... I'm searching almost everyday though these topics to find somebody who says "This is a really smooth Sense rom!". But never seen a comment like that.
Hello dear forum users.
I need your thoughts and advices on my problem.
I'm closely following the Android development on HD2 and learned nearly all methods accept "CLK".
What I recently realize is when I try to install a custom Anroid ROM I'm watching logcat and I mostly see that its giving some errors not always the same error but sometimes it stops after Iampc's(correct me if I'm wrong) sound script and starts bootloop and some times it installs without giving any errors but when it boots is giving lots of FC's after I entered the PIN or sometimes before entering the PIN. Some times it seems to load everything OK but when I turn my phone off and on again it is giving me the sound script bootloop, or not booting at all or sometimes it starts checking or reinstalling the .apks.
I've tried tytungs NexusHD, Tyween's CM mod, ponster's Hyperdroid, crawlingcity's UD etc... I tried lots off android roms and errors are the same.
I'm doing task 29, magldr 1.13, CWRmod, althoug I've fromatted the sd and partitioned it wih CWR I also did wipes of factory reset, cache and dalvik, than rom installation but results are the same.
I tried with different micro sd's and partitioning with cwm and under linux etc. etc..
I tried installing without the sd-ext partitioning and its still the same.
I've tried installing the winmo rom Energy and it setups and loads ok.
I really don't understand what is causing this and it is really making me angry.
I don't think it is related to the hardware because than winmo should give me the same kind of errors but it is not.
Does anyone faced this kind of behaviours? Please share your ideas and thoughts. Thank you.
webmanya said:
Hello dear forum users.
I need your thoughts and advices on my problem.
I'm closely following the Android development on HD2 and learned nearly all methods accept "CLK".
What I recently realize is when I try to install a custom Anroid ROM I'm watching logcat and I mostly see that its giving some errors not always the same error but sometimes it stops after Iampc's(correct me if I'm wrong) sound script and starts bootloop and some times it installs without giving any errors but when it boots is giving lots of FC's after I entered the PIN or sometimes before entering the PIN. Some times it seems to load everything OK but when I turn my phone off and on again it is giving me the sound script bootloop, or not booting at all or sometimes it starts checking or reinstalling the .apks.
I've tried tytungs NexusHD, Tyween's CM mod, ponster's Hyperdroid, crawlingcity's UD etc... I tried lots off android roms and errors are the same.
I'm doing task 29, magldr 1.13, CWRmod, althoug I've fromatted the sd and partitioned it wih CWR I also did wipes of factory reset, cache and dalvik, than rom installation but results are the same.
I tried with different micro sd's and partitioning with cwm and under linux etc. etc..
I tried installing without the sd-ext partitioning and its still the same.
I've tried installing the winmo rom Energy and it setups and loads ok.
I really don't understand what is causing this and it is really making me angry.
I don't think it is related to the hardware because than winmo should give me the same kind of errors but it is not.
Does anyone faced this kind of behaviours? Please share your ideas and thoughts. Thank you.
Click to expand...
Click to collapse
Maybe your problem is like mine
I had posted similar problem, you can check my threads here: http://forum.xda-developers.com/showthread.php?t=1000190
Pay special attention to post #42
Cheers
silverwind said:
Maybe your problem is like mine
I had posted similar problem, you can check my threads here: http://forum.xda-developers.com/showthread.php?t=1000190
Pay special attention to post #42
Cheers
Click to expand...
Click to collapse
Thank you for your advice. I don't know but I'll try to see if its really about the bad blocks. Thank you again.
I don't think my problem is about the bad blocks in the nand. Because what is funny is that I can flash the imilka's ROM's without any problems.
And one more think I realized is that I'm facing this problem with the gingerbread ROMs. I guess they are sharing something and I can not delete them so I'm facing these problems. I think it is really about that you can not delete the nand fully or format it with task 29.
Becuase I realized that when I change ROMs although I've wiped several times I'm getting errors but If I flash the ROM after flashing the original HTC ROM I don't get the same errors. So I guess what we really need is a better tool to wipe and format the NAND for us.
I don't know if this is possible.
webmanya said:
Thank you for your advice. I don't know but I'll try to see if its really about the bad blocks. Thank you again.
I don't think my problem is about the bad blocks in the nand. Because what is funny is that I can flash the imilka's ROM's without any problems.
And one more think I realized is that I'm facing this problem with the gingerbread ROMs. I guess they are sharing something and I can not delete them so I'm facing these problems. I think it is really about that you can not delete the nand fully or format it with task 29.
Becuase I realized that when I change ROMs although I've wiped several times I'm getting errors but If I flash the ROM after flashing the original HTC ROM I don't get the same errors. So I guess what we really need is a better tool to wipe and format the NAND for us.
I don't know if this is possible.
Click to expand...
Click to collapse
In fact, I still can use Imilka's, Rafdroid and few other Nandroid ROM
But, I dont want to make it worse knowing that there is some badblock(because I want to sell it)
So, I am back with Winmo and SD Android. It is much safer for me
Cheers
Hi,
Some time ago, i have installed via NAND on my HD2 CyanogenMod-7-08312011-NIGHTLY-Desire[TyphooN-v3.6.2-MAGLDR].
Last two weeks I have some problems.
I used to have a problem with sms messages-forced pin everytime i tried to read a message. I deleted all my messages and now it seems like working good.
Since last Monday I cannot enter gallery. It gives me a black screen. I tried everything.
So I thought to change Rom. Is it a good idea? I am very happy with the Rom I have but now that behaves like that maybe it'sbetter to change to a better & newer rom. But which one?
Thanx in advance.
just install a fresh rom like a Hyperdroid or cm9 roms. rember to start clean with task29.
if u like this rom - try wipe dalvik-cache.
if it dosnt help - flash a new rom.
try to instal NAND android because it is stable than the SD android it tried the SD versions but my mobile always hange up but with NAND NO PROBLEMS
try this rom i use it
http://forum.xda-developers.com/showthread.php?t=733649
I have recently ported NexusHD2-ICS-CM9_V1.4 on my HTC HD2(T-Mobile) and I need to downgrade this to NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) build?
I just tried with MagLdr with the new zip file, but at the time of first time boot up with Android setup, it complained that some google.com.XXX is already missing. So basically it wouldn't allow me to complete the setup for Gingerbread. Only reason why I am looking for downgrading is because I feel a lot of Market apps don't work on ICS Rom.
For example a bank app has a capability of scanning a check with my camera but when I am using it in ICS, it's saying that "XXX App has stopped working" please report the error.
Similarly some of the GPS application is not working fine on ICS and I am hoping this is happening because ICS is still in BETA mode and hoping that Gingerbread is much more stable then ICS.
task29
install hspl magldr and then flash the nand rom.
best solution.
aleejaved said:
task29
install hspl magldr and then flash the nand rom.
best solution.
Click to expand...
Click to collapse
Dont do that, it's just unnecessary. Go into CWM, wipe, repartition then flash your new ROM. Also, you didn't 'port' Android to your phone, you flashed it.
Sent from my HTC HD2 using XDA
rolling back
I tried to wipe partition then install from zip file and did not work any suggestions ?
Since most GB roms requires less system partition than ICS roms, I would think repartation will help. Besides after repartition, any trace of any rom is wiped clean completely.
After that you should be able to flash the zip file normally.
Ill try that when as soon as i get home and let you know if it worked , thanks
worked , thanks
Ok, so I just found my HD2 in the far back of my drawer under a bunch of stuff. It was my first smartphone, and I loved it, still do, which is why I kept it. So while I was using it I did do some modding to it. I have Android 2.3.3 on there running HyperDroid GBX v10.0. Problem is, I don't know how to do anymore modding to it. I completely forget, it has been so long since I touched the thing. All I know is when I start it up, it goes right to aMagldar v1.13 and I have to scroll down to boot NAND to get it to boot into HyperDroid. I've tried downloading and installing other ROMs, and they don't install. I've tried updating to a new version of HyperDroid, it doesn't work. Basically I'm a noob again when it comes to this device. Could somebody point me in the right direction? Do I have to install some Windows software? Do I have to install CWM? Or do I already have it? I'm lost! Any help would be greatly appreciated. This is the first time I've been in the HD2 thread in years. Thanks guys.
Paulx777 said:
Ok, so I just found my HD2 in the far back of my drawer under a bunch of stuff. It was my first smartphone, and I loved it, still do, which is why I kept it. So while I was using it I did do some modding to it. I have Android 2.3.3 on there running HyperDroid GBX v10.0. Problem is, I don't know how to do anymore modding to it. I completely forget, it has been so long since I touched the thing. All I know is when I start it up, it goes right to aMagldar v1.13 and I have to scroll down to boot NAND to get it to boot into HyperDroid. I've tried downloading and installing other ROMs, and they don't install. I've tried updating to a new version of HyperDroid, it doesn't work. Basically I'm a noob again when it comes to this device. Could somebody point me in the right direction? Do I have to install some Windows software? Do I have to install CWM? Or do I already have it? I'm lost! Any help would be greatly appreciated. This is the first time I've been in the HD2 thread in years. Thanks guys.
Click to expand...
Click to collapse
The guide in my sig should make everything clear. Choose a ROM, flash CWM with the required partition size for that ROM then flash the ROM in CWM from your SD card.