Database Users

Mobile Network State Disconnected - AOKP [Release] Build 38

Just installed:
AOKP [Release] Build 38
was running:
[DEV][RC5] Team Nyx [Android 4.0.4] (ICSSGS)
After the install of AOKP when I boot into to system the Signal bars for the netowrk are Gray instead of Blue.
I look into System Settings --> About Phone. and it says "Mobile Network State Disconnected"
I try to surf the web, doesn't work.
I can make and receive phone calls.
Baseband version: I9000XXJVU
Kernal Version: 3.1.10_IctGlitch_V14-B6_I9K-T959D [email protected] #1
When I was running Team Nyx I didn't have this problem.
The Kernal version I was running with Team Nyx was [Kernel][ICS] Devil2_0.94 [24/05/12].
Will installing a different version of the Kernal fix it? or a different modem?
If so, which one should I try and where do I get it?
BTW, I am in Saskatchewan (Canada).
Thanks,
Chad

So I figured it out, for some reason I needed to enter in Access Point Name manually.
Not sure how this will work if I am roaming and happen to need to connect to a different network.
I don't know why this ROM wouldn't pick up this info its self and the other ROM's I have tried all worked. Anyone have some incite into this?
Thanks.

3G data-unfriendly ROMs

Hi, I own two HD2's and I cannot get 3g data connection on those SD ROMs:
[31.08.2012][SD/MAG] CM9ight Leo v1.0 [4.0.4][CM9][SLIM][Securecrt/Tytung HWA kernel]
[22/08/12] [NIGHTLY] CyanogenMod 9 [4.0.4 tytung HWA R3.4] [SD/MAG]
[30,08,12][SD/MAG] iCyanogen 1.3 [Fast-Stable-Bravia-Xloud][tytung_HWA_r3.4]
In every case, during the first boot, the installer automatically tries to connect to wi-fi, so 3g/2g is on full stop... Both HD2's are working fine on Android 2.3 and WM6.5.
On the other hand, I got 3g connection on:
[30.08.2012[MAGLDR][SD]MIUI JellyBean & MIUI ICS BOTH UPDATED TODAY[POST 1&2]
(29-Aug-2012)[SD/MAGLDR]UNOFFICIAL-CM10-HD2 v1.1(JellyBean)(Tytung/Securecrt r3.3jb)
[12.Aug.2012][MAGLDR/SD] NexusHD2-ICS-4.0.4-CM9-HWA-SD V2.6
[24.Jul.2012][MAGLDR/SD] EvoHD2-ICS.v9fast 4.0.4-full HWA-SD "Fastest ICS ever"
At least as I remember, cause I spent too much time testing. Since I cannot post in development forums, I thought this info might be useful or someone can give me a solution ;P

OK - to everyone who wants to use one of this ROMs and has problems with data:
The fix is HERE. It worked for CM9ight Leo v1.0 for me - I've applied the patch before the first boot and 3g is working perfectly well, so probably it would work for the other ROMs.
(Thanks to Marvlesz for pointing the solution.)

[Q] Defy+ wifi problem

Hi!
I have a Defy+ and i flashed the latest Quarx build with the custom kernel and if i connect to the wifi after a few minutes or few downloaded MBs it's stops working-so wifi signal is OK but no connection!On motoicegun cm9 rom wifi works very well,but i want to enjoy the smooth quarx build
Anybody some idea?A clean install might help?My base is 2.3.6 BL7

Please ask all questions in the Q&A section. Thread moved there.

Nothing????Somebody please help me!!!

mihione said:
Hi!
I have a Defy+ and i flashed the latest Quarx build with the custom kernel and if i connect to the wifi after a few minutes or few downloaded MBs it's stops working-so wifi signal is OK but no connection!On motoicegun cm9 rom wifi works very well,but i want to enjoy the smooth quarx build
Anybody some idea?A clean install might help?My base is 2.3.6 BL7
Click to expand...
Click to collapse
Try turn off the "avoid poor connection" option in Wi-Fi - advanced.
Thank if I was helpful.
Cheers
Sent from my Awesome Defy!

got the same problem
"avoid poor connections" on my defy is disabled
(red lens, newest CM10 from Quarx (but on earlier builds also))

Wireless security
Try changing the security on the wireless router. For me WiFi was useless until I changed from WPA2-PSK to WPA-PSK.
Right now I'm not at home so I can't tell if this stands for the new update as well. Worth a try.

My brother have a green lense defy and it's working very good at the same router and same build,but my defy+ doesn't.
Avoid poor connections is disabled :/

It's a very common problem, some have it, some never experience it. Sometimes a router firmware upgrade helps, sometime editing the tiwlan.ini and turning off the N mode. I thought it would be easier to start with the router and if you are feeling brave then
1. Use the Root explorer, open this file path: “/etc/wifi/”,
2. Make a backup and use the file editor to open the “tiwlan.ini”.
3. Find this two lines below, change the value if it is not 0.
HT_Enable = 0 # 0=diable 802.11n support
BurstModeEnable = 0 # 0 - Disabled 1 - Enabled
4. Save the file, then reboot your Defy.
This approach never helped me but who knows...
But still, you should start with the router really.

changing 1 to 0 worked...
thanks for the last post....
worked for me..:good:.

Thank you!I upgraded my router firmware and it's working!!!I hope it will be working on the most routers not only at home

You're Welcome
You're welcome, glad to help, but yeah it's a serious problem and you can't update every router's fw
De ha akarod megpróbálhatod, csak kérlek fényképezd le az arcokat amikor bejelented, hogy "Nem megy a Defy-m önöknél, frissíthetek routert? :laugh: "

[Q] unfortunately application has stopped

hi i get this error * unfortunately{application name} has stopped * for most application (facebook ,tango,.....) after i updated my phone (SM-G900F) to lollipop 5L .... i try to clear data but don't make any change ... any one know anyy solution ???

[ROM+KERNEL][6.0.1] Unofficial CM 13.0 for Nubia Z11 with CAF LA.HB.1.3.2 kernel

# Firstly
- This is an alpha build
# Features
- CAF kernel
- NQ-NFC
- Stock NeoVision camera
- Stock IR remoter
# Changes
2016/09/08
- Fix mis-touch on edge
2016/09/05
- ROM: CM 13.0-20160905
- Switched to open source kernel (LA.HB.1.3.2-25000-8x96.0)
- Latest Adreno blobs
- Added support for virtual navigation keys
# Known issues
- Dual-SIM doesn't work well (manually switches the network may help)
- Super Slow Recording doesn't work
# Downloads
https://www.androidfilehost.com/?fid=24686681827315030
(md5: 0922ec2b9c2445946afd4da18564ace3)
XDA:DevDB Information
Unofficial CM 13.0 for Nubia Z11, ROM for all devices (see above for details)
Contributors
chenxingyu
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-08-28
Last Updated 2016-09-08

Hello, just logged in to press the thank button. I was looking to buy this phone and basically the decision relied on whether there was any unofficial mod for it or not. So thank you! Can't wait to try it when I'll buy the device!

Just a query, can the same ROM can be used for 4gb and 6gb models?

chenxingyu said:
# Firstly
- This is an alpha build
- Stock prebuilt kernel since Nubia haven't released its source
# Features
- NQ-NFC
- Stock NeoVision camera
- Stock IR remoter
# Known issues
- Dual-SIM doesn't work well (manually switches the network may help)
- Super Slow Recording doesn't work
# Downloads
https://www.androidfilehost.com/?fid=24686681827313184
XDA:DevDB Information
Unofficial CM 13.0 for Nubia Z11, ROM for all devices (see above for details)
Contributors
chenxingyu
ROM OS Version: 6.0.1 Marshmallow
Version Information
Status: Alpha
Created 2016-08-28
Last Updated 2016-08-28
Click to expand...
Click to collapse
bro how can i use this ROM with my zte z11 max ?

rowihel2012 said:
bro how can i use this ROM with my zte z11 max ?
Click to expand...
Click to collapse
No, it's for Z11 (NX531J) only.

sarvesvara.dasa said:
Just a query, can the same ROM can be used for 4gb and 6gb models?
Click to expand...
Click to collapse
Yes

i have problem with network. when i m switch to gsm/wcdma/LTE network came crazy and doesn't work.

jazzypit said:
i have problem with network. when i m switch to gsm/wcdma/LTE network came crazy and doesn't work.
Click to expand...
Click to collapse
Just switch data network to Global, should be working fine.

It work but global is for chinese band and i think is not optimised for french network
Envoyé de mon SM-G935F en utilisant Tapatalk

I have the same issue. No data on 3G/4G. Have to use WiFi. EU here.

Finally LTE data network works in Europe and America? Anybody knows?

Installed cm13 yesterday on my z11. Everything is working. LTE works fine. In Switzerland...
I just have a bug with the clock. It stopps when i launch it.

https://www.nubiamobile.it/content/12-linee-guida-modifiche-software
English

An update has been available for a few days, no changelog here. Gonna test it tonight since I received the phone yesterday.
Link: http ://www.androidfilehost.com/?fid=385026487222272927
Edit: this does not install for some reason. I stuck on the previous version. PS someone can tell me if the audio chip has its drivers here?
Edit 2: I can confirm that LTE is working sometimes and 3g not at all with "global" selected. Italian networks. The only other thing i had misbehaving was the notification led, which was completely random.

@chenxingyu Do you mind posting your roomservice.xml?

are you working on cm13 in the future or is this project standing and your focus on cm14?
cm13 runs very good no force crash or reboot everything works perfect. but i have battery drain, get only 20 h standby and max 4h screen on time.
best regards

TimSmet said:
are you working on cm13 in the future or is this project standing and your focus on cm14?
cm13 runs very good no force crash or reboot everything works perfect. but i have battery drain, get only 20 h standby and max 4h screen on time.
best regards
Click to expand...
Click to collapse
Recently I'm focus on CM14. Almost works now.

Hi,
Mobile data doesn't work with China Unicom? It's definitely switched on, it works in the stock ROM but on yours it does not work at all, I've changed network types to Global then WCDMA, I can't get 3G or 4G.

Ah... I noticed you have a OPO in your profile? Did you build this from that version?
OPO have a bug report about this for many years... any chance you could fix it for the Z11? https://jira.cyanogenmod.org/browse/BACON-307

chenxingyu said:
Recently I'm focus on CM14. Almost works now.
Click to expand...
Click to collapse
Great work on this build, could you tell us if the CM14 version is available, would love to give it a go ?